Related
I have got this weird problem with my Qtek 9090, I can’t hear a thing from the speaker except incoming calls??? And there’s no sound when I pick up and no one hear me on the other side unless I use the headset or the Bluetooth headset, everything works great then even playing music !??
I tried with few other rom, but no success! I even tried with WM5
Could this have anything with the headset plug? Cuse when the headset is plugged (in normal case) you can only hear incoming calls from the phone!
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Guest said:
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Click to expand...
Click to collapse
Not even flashing with new rom is helping as I wrote
FFVIII said:
Guest said:
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Click to expand...
Click to collapse
Not even flashing with new rom is helping as I wrote
Click to expand...
Click to collapse
What has flashing with a new rom have to do with removing your bluetooth profile?
Guest said:
FFVIII said:
Guest said:
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Click to expand...
Click to collapse
Not even flashing with new rom is helping as I wrote
Click to expand...
Click to collapse
What has flashing with a new rom have to do with removing your bluetooth profile?
Click to expand...
Click to collapse
dude, thanks for trying to help, but you should know better. flashing with a new rom erase everything including the the BT profile. I still think the problem is the headset jack.
And there’s no sound when I pick up and no one hear me on the other side unless I use the headset or the Bluetooth headset, everything works great then even playing music !??
Click to expand...
Click to collapse
This is telling me that you DID install the bluetooth again, and so you have a bluetooth profile, what is causing the no sound problem!
I have exactly the same problem as you.. When I remove the bluetooth profile all is working fine again.. that is.. untill I set it up again, and use it.. Than the SAME problem is back.
thank alot , but still got the problem even with the BT-profile removed, I have to use the wired headset to be able to hear anything
Problem Solved :lol: :lol: :lol:
I Opened the damn thing and took a look at the 2,5mm jack and guess what, it was broken ( I remember dropping the phone once for a week ago), I just removed it ( I don’t use the headset but I need the speaker), and everything is loud and clear now,
and with a Sprite Backup file I’m back now :twisted:
!!!?
I have such problem, but I think it really barbarian means of solving problem.
Is there any cleaner way?
Re: !!!?
hishnik said:
I have such problem, but I think it really barbarian means of solving problem.
Is there any cleaner way?
Click to expand...
Click to collapse
I read in another post somewhere that there is a microswitch in/near the headphone jack that switches off the sound to the speaker. Apparently, if it sticks, you poke a paper clip in and twiddle it about and you'll free it.
no sound form jasjar
having same problem. poked around with paperclip and all that, but still no sound. dont need headphone jack because hoping to use latest a2dp hack form latest rom for jasjar to be able to use BT headset. will removing headphone jack affect using BT headphones? need external sound.
I also have a similar problem - when in phone mode, other side can hear me but i cannot hear them, if i plug a headset with microphone the other side hear me and i also have sound from other side.
if i unplug the headset, i cannot hear the other side but the other side can hear me.
are there microswitches inside the headset plug for both microphone and speaker (two microswitches) ?
thanks, yol.
just got my jasjar back after having cracked lcd and headphone jack replaced. sent to http://www.pocketpctechs.com out of california as suggested by very helpful user on this site. cost me around $20 dollars and took only a day to fix. works fine now!
My O2 XDA IIs is behaving rater unusally. For a while I've had the problem that many people have reported where I can hear nothing during a call but the other person can hear me. This could be remedied by a soft reset. However now, no amount of resets seem to fix the problem.
The baffling thing is though that the speaker hardware would appear to be working as MediaPlayer still plays music out of it and the phone still rings etc. However no sound what so ever comes through the 2.5mm socket now, from either a call or from MediaPlayer.
What on earth can I do to fix it?
My O2 XDA IIs is behaving rater unusally. For a while I've had the problem that many people have reported where I can hear nothing during a call but the other person can hear me. This could be remedied by a soft reset. However now, no amount of resets seem to fix the problem.
The baffling thing is though that the speaker hardware would appear to be working as MediaPlayer still plays music out of it and the phone still rings etc. However no sound what so ever comes through the 2.5mm socket now, from either a call or from MediaPlayer.
What on earth can I do to fix it?
Guys, are your problem similar to mine? My problem is that the speaker is not working even though playing mp3. I thought it was radio problem, so flashing new rom also doesnt help. It is really the headphone jack cause the problem? When i flash to new rom, the speaker works, but after the auto config, the speaker doesnt even sound.
Please advise me on this. Thank in advance
Guys, are your problem similar to mine? My problem is that the speaker is not working even though playing mp3. I thought it was radio problem, so flashing new rom also doesnt help. It is really the headphone jack cause the problem? When i flash to new rom, the speaker works, but after the auto config, the speaker doesnt even sound.
Please advise me on this. Thank in advance
I recently purchased a pair of Iogear wireless Bluetooth headphones to use with my Fuze. I went through the process of pairing them, and managed to get them to connect. But when I tried to use them with listening to music or making a call, they would not work.
Anyone else have a problem or a clue as to why they won't work?
The phone supports both A2DP and AVRCP.
Hope this is in the correct section.
I'm unsure on why it won't work. I have some Plantronics Pulsar 590A and they are top notch. I use it with my 8525 (Hermes) and the sound quality is great. Also, Plantronics does a great job on their warranty.
I have noticed that sometimes when I connect my bluetooth headphones, that if I had the media player already launched that it would not play through the bluetooth headphones but though the built in speaker still. Once I shut down the media player and launched again after bluetooth was enabled and headphones connected, it would work.
When you paired the headphones, did you make sure that in the bluetooth settings for your bluetooth headphones (under settings, connections, bluettooth find and tap on your headphones and check there) that wireless stereo and handsfree was checked.
Sometimes also, my device for some reason just chooses not to connect anymore to my headphones and I have to do a soft reset to get it to connect. Does not happen very often - once per month. I use my bluetooth headphones and the Motorola T505 in my car for streaming music wirelessly to my car stereo every day.
hotrod101 said:
I have noticed that sometimes when I connect my bluetooth headphones, that if I had the media player already launched that it would not play through the bluetooth headphones but though the built in speaker still. Once I shut down the media player and launched again after bluetooth was enabled and headphones connected, it would work.
When you paired the headphones, did you make sure that in the bluetooth settings for your bluetooth headphones (under settings, connections, bluettooth find and tap on your headphones and check there) that wireless stereo and handsfree was checked.
Sometimes also, my device for some reason just chooses not to connect anymore to my headphones and I have to do a soft reset to get it to connect. Does not happen very often - once per month. I use my bluetooth headphones and the Motorola T505 in my car for streaming music wirelessly to my car stereo every day.
Click to expand...
Click to collapse
You know this happens with me with Core Player. I have to set up the A2DP before I start a movie or song in the program or else it won't work.
Instead of doing a soft reset I just turn bluetooth off and then back on. That usually solves the problem of the mystery disconnect.
hotrod101 said:
I have noticed that sometimes when I connect my bluetooth headphones, that if I had the media player already launched that it would not play through the bluetooth headphones but though the built in speaker still. Once I shut down the media player and launched again after bluetooth was enabled and headphones connected, it would work.
When you paired the headphones, did you make sure that in the bluetooth settings for your bluetooth headphones (under settings, connections, bluettooth find and tap on your headphones and check there) that wireless stereo and handsfree was checked.
Sometimes also, my device for some reason just chooses not to connect anymore to my headphones and I have to do a soft reset to get it to connect. Does not happen very often - once per month. I use my bluetooth headphones and the Motorola T505 in my car for streaming music wirelessly to my car stereo every day.
Click to expand...
Click to collapse
Yeah, that was one of the first things I had done before even trying to use them. I checked the settings. But still to no avail. Even tried soft resetting.
It worked instantly with my Tilt though. But I bought them to use with the Fuze lol.
addicus said:
You know this happens with me with Core Player. I have to set up the A2DP before I start a movie or song in the program or else it won't work.
Instead of doing a soft reset I just turn bluetooth off and then back on. That usually solves the problem of the mystery disconnect.
Click to expand...
Click to collapse
Yes I do this to for this particular problem. The soft reset required problem is something different - Not sure yet what causes it - I think that it is an app that I run every now and then that causes some kind of conflict even after it has been shut down. Still have to figure it out
mzshortay said:
Yeah, that was one of the first things I had done before even trying to use them. I checked the settings. But still to no avail. Even tried soft resetting.
It worked instantly with my Tilt though. But I bought them to use with the Fuze lol.
Click to expand...
Click to collapse
Have you been successful in connecting other bluetooth headsets to your device which worked?
hotrod101 said:
Have you been successful in connecting other bluetooth headsets to your device which worked?
Click to expand...
Click to collapse
Oh yeah. My bluetooth headset, Plantronics umm forgot the number works with the Fuze. This is a mystery to me
Have you tried your new bluetooth headphones with different media players such as S2P or Mortplayer, TCPMP, Core Player, WM Player, HTC audio Manager should all support but perhaps what you are using does not. I don't have a Fuze so don't know how the built in audio manager media player works but have seen several posts with people having problems. Try another media player 3rd party such as S2P, Mortplayer, TCPMP (all free) or Core Player (not free)
hotrod101 said:
Have you tried your new bluetooth headphones with different media players such as S2P or Mortplayer, TCPMP, Core Player, WM Player, HTC audio Manager should all support but perhaps what you are using does not. I don't have a Fuze so don't know how the built in audio manager media player works but have seen several posts with people having problems. Try another media player 3rd party such as S2P, Mortplayer, TCPMP (all free) or Core Player (not free)
Click to expand...
Click to collapse
Okay, I'll do that, but it doesn't even work with using them to make a call.
There's a built-in mic on them, so it should work with that as well. It says it's connected, but the lil headphone icon never shows up when I turn them on.
Are these the ones you have
http://www.iogear.com/product/GBMH211W6/
It says your device must support Headset or Hands-Free Profile. try unchecking wireless stereo and only check one of these profiles and see if it works
hotrod101 said:
Are these the ones you have
http://www.iogear.com/product/GBMH211W6/
It says your device must support Headset or Hands-Free Profile. try unchecking wireless stereo and only check one of these profiles and see if it works
Click to expand...
Click to collapse
If this doesn't work you may wanna RMA yours and get a new pair. If that doesn't work, then you may wanna step up to a more expensive pair.
hotrod101 said:
Are these the ones you have
http://www.iogear.com/product/GBMH211W6/
It says your device must support Headset or Hands-Free Profile. try unchecking wireless stereo and only check one of these profiles and see if it works
Click to expand...
Click to collapse
Yeah, those are the ones I have.
And it does support both of those.
Maybe I'll do what addicus said and send them back.
I was really hoping these would work too! Darn.
-------------
After trying them again, when I tried to make a call, I heard it make a sound as if it was turning off, and still did not work properly.
I'll be returning these most likely.
mzshortay said:
Yeah, those are the ones I have.
And it does support both of those.
Maybe I'll do what addicus said and send them back.
I was really hoping these would work too! Darn.
-------------
After trying them again, when I tried to make a call, I heard it make a sound as if it was turning off, and still did not work properly.
I'll be returning these most likely.
Click to expand...
Click to collapse
Damn you shortay! Since I wrote in this thread my Plantronics have been tripping when I make a phone call and not syncing up. I figured it out. It's that new Yota dialer I put in the other day. Sometimes I can't use the bluetooth on a phone call unless the A2DP is hooked up. Weird.
addicus said:
Damn you shortay! Since I wrote in this thread my Plantronics have been tripping when I make a phone call and not syncing up. I figured it out. It's that new Yota dialer I put in the other day. Sometimes I can't use the bluetooth on a phone call unless the A2DP is hooked up. Weird.
Click to expand...
Click to collapse
Lol, sorry! I wonder if I hard reset my phone will it fix it.
I messed around with a new cab earlier today, and had to restore
my phone, and i think it's be tripping afterwards anyway. Last try before I sent them back...that's after the iogear support people reply to me. Appreciated all the help.
Okay, so the email I got from the support basically told me how to set up the bluetooth headphones. WOW... some help they are. Other than giving me a number to call if I needed "further assistance". I thought that's what I was asking for in the first place.
Anywho, after randomly deciding to hard reset my phone, I tried the headphones again, and wah lah...they work!
I guess some setting in my phone wasn't set right. Go figure. Anyway.. Thanks to those who helped.
I'll be keepings these.
mzshortay said:
Lol, sorry! I wonder if I hard reset my phone will it fix it.
I messed around with a new cab earlier today, and had to restore
my phone, and i think it's be tripping afterwards anyway. Last try before I sent them back...that's after the iogear support people reply to me. Appreciated all the help.
Okay, so the email I got from the support basically told me how to set up the bluetooth headphones. WOW... some help they are. Other than giving me a number to call if I needed "further assistance". I thought that's what I was asking for in the first place.
Anywho, after randomly deciding to hard reset my phone, I tried the headphones again, and wah lah...they work!
I guess some setting in my phone wasn't set right. Go figure. Anyway.. Thanks to those who helped.
I'll be keepings these.
Click to expand...
Click to collapse
Cool beans shortay! Stay around XDA Dev.
mzshortay said:
Lol, sorry! I wonder if I hard reset my phone will it fix it.
I messed around with a new cab earlier today, and had to restore
my phone, and i think it's be tripping afterwards anyway. Last try before I sent them back...that's after the iogear support people reply to me. Appreciated all the help.
Okay, so the email I got from the support basically told me how to set up the bluetooth headphones. WOW... some help they are. Other than giving me a number to call if I needed "further assistance". I thought that's what I was asking for in the first place.
Anywho, after randomly deciding to hard reset my phone, I tried the headphones again, and wah lah...they work!
I guess some setting in my phone wasn't set right. Go figure. Anyway.. Thanks to those who helped.
I'll be keepings these.
Click to expand...
Click to collapse
Glad they are working now for you.
okay, so I may need you guy's advice. It seems as though they only work once and then i have to delete them from the phone, then discover them again. Could it be a defect in the particular headphones I have, or the model not working with my Fuze? Maybe I should RMA these anyway?
Maybe you should head on into the shop you purchased your Fuze and describe the problem to them. Perhaps they will allow you to connect various different bluetooth headphones (that they have at the shop) to your device to see if it is a problem with your device or with your headphones.
hotrod101 said:
Maybe you should head on into the shop you purchased your Fuze and describe the problem to them. Perhaps they will allow you to connect various different bluetooth headphones (that they have at the shop) to your device to see if it is a problem with your device or with your headphones.
Click to expand...
Click to collapse
This is a great idea! If you find out the problem is with the headset - RMA them. If not, dig deep in that Fuze forum and see if you guys can figure out a fix.
Anyone to recommend a good Bluetooth headset, a set with music controls 3.5mm jack for your own earphones and a display that would display the id3 tags or file name. Of course be able to answer calls.
I'm using a Nokia one at the moment but its not very responsive, dunno if its because of the old Bluetooth 1.0 compatibility.
Sent from my HTC Wildfire using XDA App
Sony MW600.
Thanks for the recommendation, so I bought a set after reading positive reviews. Connection was easy and very quick and responsive. But one fault is that the phone itself starts ringing on incoming calls the and some signals through the headset. Weird doesn't happen on my old slow unresponsive BT headset (Nokia) at least the phone didn't ring just signals through the headset bit embarrassing when your phone goes off and you answer on a BT headset.
Any settings that could fix this?
I have resetted BT pairing and the headset but still same.
Anybody use this with wildfire?
Sent from my HTC Wildfire
Are you using any custom roms? I remember that cyanogen rom has some options about ringing in headphones, if I am not mistaken.
Also, did you test it on another phone to see if it's behaving the same way ?
Sent from my HTC Wildfire using XDA App
I am using Wildpuzzle 0.8. Checked media and phone audio is connected. Have tried it on a Nokia and same thing happens. Can the headset be updated or something? My way round is to mute the phone when I connect the headset but this is so inconvenient when sometimes I forget to reenable sound.
Sent from my HTC Wildfire
I use these and they are great.
product 172052 on misco.co.uk (I can't post outside links)
MasterDL said:
I am using Wildpuzzle 0.8. Checked media and phone audio is connected. Have tried it on a Nokia and same thing happens. Can the headset be updated or something? My way round is to mute the phone when I connect the headset but this is so inconvenient when sometimes I forget to reenable sound.
Sent from my HTC Wildfire
Click to expand...
Click to collapse
Try this: Do a nandroid back-up and flash CM7. See if the problem still persists.
If not... I`m out of ideas. Maybe try to get a refund?
I have read many threads with same complaint, now realising It's a feature of most new smartphones (dunno whether its just android or not) that phone always rings with Bluetooth headsets just in case for some reason you take out your earphones for some reason.
I'm a little reluctant to switch to cm7 waiting for it to be stable first.
Sent from my HTC Wildfire
MasterDL said:
I have read many threads with same complaint, now realising It's a feature of most new smartphones (dunno whether its just android or not) that phone always rings with Bluetooth headsets just in case for some reason you take out your earphones for some reason.
I'm a little reluctant to switch to cm7 waiting for it to be stable first.
Sent from my HTC Wildfire
Click to expand...
Click to collapse
I think it`s normal for a phone to ring via the speaker even with the headset connected. Maybe they just need to add an option for it.
I meant testing CM7, not switching to it completely. A 30 min job to test CM7 and restore nandroid.
Hi
Just got the MW600 as well, very pleased so far.
I have the same issue, phone is ringing as well - whereas it does not really bother me.
There are few things not working well for me, so I was hoping to find here some feedback:
- No Song titles are displayed (not so bad since it is normally clipped in a position where you can not easily check
- the call-button does not work to call somebody, only to take a call
- the play button does not automatically start playing HTC music - but worked with Winamp and Songbird
Any suggestions ?
Original Rom (l have 2.2.1 nie) have Sound quality issue over a2do. HTC support said, I must wait for next update (when they may be fix it)
Sent from my HTC Wildfire using XDA App
I'm having an issue with my Plantronics 903+ Bluetooth Headset. They pair and play's music fine , but it cuts out quite alot if i move about. Honestly if I have to sit still I may as well get wired headphones.
I am CM nightly's (71) with the latest radio flashed.
Any help is greatly appreciated.
Hello,
i use Jabra BT3030
http://www.productwiki.com/jabra-bt3030/
3 years of working, without any problem
Ok, I really start to like the SE MW600 a lot
If you get a call music stops and you can take the call with one button.
Double tapping the call button re-calls the last person you phoned - works good as well.
But I am still not having the ideal media player
Original HTC music player fails to start up automatically when you tab the music button
- but next song/pause works well
Songbird opens automatically, next song/pause/... works well but searching in a track not and it is rather heavy making the phone really slow
Winamp is probably the best, but I still think it is too heavy
Does anybody knows a good light media player with bluetooth support ?
gpgeza said:
Hello,
i use Jabra BT3030
3 years of working, without any problem
Click to expand...
Click to collapse
I rely like the credit card size
Now i will just need to find a suitable motorcycle helmet -come in all types of handy with speed camera app`s
reply
The best headsets I came across was from soundID. They have really great stuff
______________________________________________
The best headsets I came across was from soundID. They have really great stuff
Click to expand...
Click to collapse
you are right ^^
Thanks for Your help!
Thank You guys for your help. I read thread and finds it useful.
My HTC Incredible was working perfectly with my bluetooth car stereo up until about a month or so ago. The weird thing is now it will still pair properly with my car stereo and I am able to play music from my phone through the car stereo but when making or receiving phone calls it will not make any sound through the stereo or speakers.
It will place the call, the other person will be able to pick up and receive the call but they can't hear anything I am saying and I can't hear anything they are saying.
This used to work perfectly before and what's baffling me is I can still play music from my phone with the bluetooth fine without any issues.
I have an AMOLED screen incredible running 2.2 and Unrevoked. I installed Skyraider 3.5 (most current one whatever that is) I have used Metamorph to place my handcent where the + symbol is on the bottom rosie bar, I have also flashed the Berzerker mod for splash of red to make everything red and also provide 6 signal bars instead of 4. I am also running KingKlix BFS#6 kernel. Other than that everything is unchanged.
I have also tried to pair with other car stereo's with the same outcome. What did I do and how can I get this to work again? Is there a bluetooth folder on the system files that I can check to see if there is a change in there or something? Any help with this would be greatly appreciated. Thank you in advance!
GatorsUF said:
Click to expand...
Click to collapse
I don't think break dancing is gonna fix my bluetooth thanks though
1967ls2 said:
My HTC Incredible was working perfectly with my bluetooth car stereo up until about a month or so ago. The weird thing is now it will still pair properly with my car stereo and I am able to play music from my phone through the car stereo but when making or receiving phone calls it will not make any sound through the stereo or speakers.
It will place the call, the other person will be able to pick up and receive the call but they can't hear anything I am saying and I can't hear anything they are saying.
This used to work perfectly before and what's baffling me is I can still play music from my phone with the bluetooth fine without any issues.
I have an AMOLED screen incredible running 2.2 and Unrevoked. I installed Skyraider 3.5 (most current one whatever that is) I have used Metamorph to place my handcent where the + symbol is on the bottom rosie bar, I have also flashed the Berzerker mod for splash of red to make everything red and also provide 6 signal bars instead of 4. I am also running KingKlix BFS#6 kernel. Other than that everything is unchanged.
I have also tried to pair with other car stereo's with the same outcome. What did I do and how can I get this to work again? Is there a bluetooth folder on the system files that I can check to see if there is a change in there or something? Any help with this would be greatly appreciated. Thank you in advance!
Click to expand...
Click to collapse
This is not development related. Might fit better in Q&A.
Have you tried a wipe and reflash of the ROM? Or wipe/flash a different ROM? You likely downloaded/flashed something funky thats messing with it. Even a VZW rep will tell you thats the first step in troubleshooting any issues. If all else fails, RUU back to stock. If it still isn't working properly, you have something wrong with your device and it needs to be sent back for warranty.
Furthermore, I would recommend not making any manual edits to /system. Although you're not likely to brick your device doing so, you're going to cause yourself more trouble and likely break other things in an attempt to fix bluetooth.
I will try to go back to stock & then keep adding things until it no longer works. Hopefully once I go back to stock it works again.
You might try Bluetooth Fix Repair from Market. Delete the pairing from the car bluetooth first then run the Bluetooth Fix Repair on the Incredible then re-pair. This has helped me when phone would not connect before and hopefully will help you.
Doc
I completely unrooted my phone and went back to OEM. Tried to connect the phone to the bluetooth with the same outcome.
It is definitely a hardware issue with the phone and not any software issue.
I contacted Verizon they sent me a new one over night and just finished rooting it and running my last nandroid to it. I am back where I began with everything loaded back up properly the way it was. This one also works perfectly with Bluetooth!
Glad you got it resolved.
Doc
http://forum.ppcgeeks.com/android-tp2/145568-3-5mm-headset-test-kernel.html
you're welcome
Hey ACL,
Did you build this test kernel off Kernel 1336 (the latest FRX07 test kernel) or is it from a prior kernel that doesn't incorporate the changes? Will this be in FRX07?
slickdaddy96 said:
Hey ACL,
Did you build this test kernel off Kernel 1336 (the latest FRX07 test kernel) or is it from a prior kernel that doesn't incorporate the changes? Will this be in FRX07?
Click to expand...
Click to collapse
Wait, what? There's no "FRX07 test kernel"... This is based off of 1333 - if you look at the autobuild service, there's a new kernel now 1337 - this has the 3.5mm code in it.
arrrghhh said:
Wait, what? There's no "FRX07 test kernel"... This is based off of 1333 - if you look at the autobuild service, there's a new kernel now 1337 - this has the 3.5mm code in it.
Click to expand...
Click to collapse
Sorry Arrrghhh, I misspoke, I meant that 1336 added some things for the upcoming FRX07 release. I was just wondering what kernel ACl built the patches off of so I could figure out what was included and not included in his testing kernel, but I had not had the chance to check the site to see there was a new kernel available that included his patches. So I will just use 1337.
Sorry for the confusion.
yes
god listen to me and put to work 3.5 mm beacuse i use the big audio jack o the usb headphone finaly i use 3.5 mm jack
emanuelrv said:
god listen to me and put to work 3.5 mm beacuse i use the big audio jack o the usb headphone finaly i use 3.5 mm jack
Click to expand...
Click to collapse
Pretty sure god had nothing to do with it. Unless you're putting ACL on that high of a pedestal... don't let him get too big of a head now
Enjoy.
Dev of the day
Works great, I've been using the auto build kernal all day and I'm very happy that I no longer get any system panic issues after unplugging like I did when using the extusb. Good job! Thanks ACL
when using the extusb reboot the phone sometime
emanuelrv said:
when using the extusb reboot the phone sometime
Click to expand...
Click to collapse
Do you have an issue with just the 3.5mm jack? I haven't had a single reboot yet. Please tell us what build, phone, etc...
Apparently the code to check for headset button isn't there. From a quick look at dmesg it thinks that the TRRS headset is a plain headphone, and pressing the call/answer button doesn't seem to do anything.
-- Starfox
Starfox said:
Apparently the code to check for headset button isn't there. From a quick look at dmesg it thinks that the TRRS headset is a plain headphone, and pressing the call/answer button doesn't seem to do anything.
-- Starfox
Click to expand...
Click to collapse
Correct, I guess ACL or I should've mentioned this is only the jack that is functional and the audio that routes out of it - there are no advanced features that work (yet).
Give 'em an inch and they'll take a mile - fix it then!
Alarms don't seem to play over either the jack or the speaker when the 3.5mm jack is plugged in.
I tend to keep my TP2 in a cradle overnight, with a speaker. It plays white noise at night over the cradle speakers, charges, and then, in winmo, plays the morning alarms over the device speaker (can't remember if that routing is optional or automatic, but it's comforting since my cradle doesn't have battery backup).
Not trying to take a mile, just thought the mention might be helpful
arrrghhh said:
Correct, I guess ACL or I should've mentioned this is only the jack that is functional and the audio that routes out of it - there are no advanced features that work (yet).
Give 'em an inch and they'll take a mile - fix it then!
Click to expand...
Click to collapse
hehe..
Well i dont have a headset with any advance features so i can't continue at this point until i get my hands on one. And i'm not sure of what the rhod can do even on winmo since i've never used those features.
I guess if we have an outlined goal as to what needs to be added then we can start. Right now its just plain audio
what's an "advanced" feature anyway? are they referring to button-event handling? (as in, during music playback, 1 button press on the headphone is pause, double press is skip to next song, etc...)
AkumaX said:
what's an "advanced" feature anyway? are they referring to button-event handling? (as in, during music playback, 1 button press on the headphone is pause, double press is skip to next song, etc...)
Click to expand...
Click to collapse
Yes. I believe you can also mute calls, answer calls, etc if you have a fancy headset/mic. Some have volume controls as well. All sorts of in-line goodness.
Hey ACL this is really great work on the 3.5 jack. thank you so much for getting that working i have been using it the past few days and it is great!
I will point out one thing i know there is no advanced features as of yet but i will point out that when you get a phone call and the jack is plugged in you can answer thru the phone but the mic is not active. Like my wife uses her phone in her car thru the 3.5 jack and that is how she talks hands-free but the mic does not activate when the headset is plugged in when you receive a phone call. if you unplug it the other party can hear you but as soon as you plug it in they cant. I don't think that is really an advanced feature but just thought i would point it out!
Thanks again this stuff is really awesome!
oh and we are both on rhods400 and rhod500 she being the rhod 500 but its the same on mine cuz i tried it.
steveoski111 said:
Hey ACL this is really great work on the 3.5 jack. thank you so much for getting that working i have been using it the past few days and it is great!
I will point out one thing i know there is no advanced features as of yet but i will point out that when you get a phone call and the jack is plugged in you can answer thru the phone but the mic is not active. Like my wife uses her phone in her car thru the 3.5 jack and that is how she talks hands-free but the mic does not activate when the headset is plugged in when you receive a phone call. if you unplug it the other party can hear you but as soon as you plug it in they cant. I don't think that is really an advanced feature but just thought i would point it out!
Thanks again this stuff is really awesome!
oh and we are both on rhods400 and rhod500 she being the rhod 500 but its the same on mine cuz i tried it.
Click to expand...
Click to collapse
Is this the same for extUSB? I guess I could try it, but I would assume "yes".
steveoski111 said:
Hey ACL this is really great work on the 3.5 jack. thank you so much for getting that working i have been using it the past few days and it is great!
I will point out one thing i know there is no advanced features as of yet but i will point out that when you get a phone call and the jack is plugged in you can answer thru the phone but the mic is not active. Like my wife uses her phone in her car thru the 3.5 jack and that is how she talks hands-free but the mic does not activate when the headset is plugged in when you receive a phone call. if you unplug it the other party can hear you but as soon as you plug it in they cant. I don't think that is really an advanced feature but just thought i would point it out!
Thanks again this stuff is really awesome!
oh and we are both on rhods400 and rhod500 she being the rhod 500 but its the same on mine cuz i tried it.
Click to expand...
Click to collapse
Yeah the mic should not work. What we did was actually trick the system to route sound to the headset based on a trigger. We aren't detecting the type of headset which has to be done later along with the advanced functions.
[ACL] said:
Yeah the mic should not work. What we did was actually trick the system to route sound to the headset based on a trigger. We aren't detecting the type of headset which has to be done later along with the advanced functions.
Click to expand...
Click to collapse
Is there any way to make it work - maybe an option to force it? The ability to use the headphone jack to drive the car audio (while leaving the mic active) is crucial to many of us. I don't care whether or not the phone detects the type of headset - I'd just like to be able to have it default to having the mic turned on rather than off.
Gilliland said:
Is there any way to make it work - maybe an option to force it? The ability to use the headphone jack to drive the car audio (while leaving the mic active) is crucial to many of us. I don't care whether or not the phone detects the type of headset - I'd just like to be able to have it default to having the mic turned on rather than off.
Click to expand...
Click to collapse
course there is a way. write the code.. lol ..
i dont know about any workarounds .. to be honest i dont care about any workarounds. I'll leave that up to you guys to find out.