Does anyone else have any issue with the back button flaking? The arrow isn't as Sharp anymore it's more like a like with a splodge for and arrow.
Can show a picture if you want to see what I mean
Sent from my HTC Desire using XDA App
Mine is very similar. It isn't flaking, but the silver paint is almost completely rubbed away. The rest of the buttons are completely fine.
It's only a small problem, but I love this phone too much to replace it
Happening the exact same thing with my donnow why or what I can do to prevent it from flaking even more! this sucks cause I didnät even know that the buttons had some sort of cheap coating on them
are yours ingraved or just painted on? Mines are ingraved and with alot of use it doesn't seem to be rubbing off..
MonkeyBone said:
Does anyone else have any issue with the back button flaking? The arrow isn't as Sharp anymore it's more like a like with a splodge for and arrow.
Click to expand...
Click to collapse
Yep, exactly this. Bought late March and the first wear was this by early August. The whole end of the top arrow pointer has flaked off on the back button and I've never used nails for pressing it for such to exacerbate the wear nor let the phone get wet or leave exposed to above typical heat (etc).
-----------------------------------
- Sent via my HTC Desire -
Wow do you lot have sandpaper for skin on your fingers?
Sent from my HTC Desire using XDA App
Same!
All other buttons are fine. Top part of the arrow head is getting bigger and bigger.
__WiZaRD__ said:
Wow do you lot have sandpaper for skin on your fingers?
Click to expand...
Click to collapse
No, but I definitely have a lumberjacks hands...
-----------------------------------
- Sent via my HTC Desire -
My back button is fine, but the home button started to peel a bit
Maybe some batches of buttons are different ? Mine don't have this issue, but are starting to be unresponsive if I don't push quite hard on them.
Can confirm that button finishes do vary between Desires. I held my phone side by side with one in a Carphone Warehouse yesterday and noticed that the CW model had darker, shinier gunmetal buttons (like the black Desires?) whereas mine has the more matte, light grey buttons which have texture. I haven't had any issues with mine peeling thus far.
Related
Not sure if this happened before I dropped it at Christmas or not... BUT...
My volume button is sticking out at the bottom. So the end that lowers the volume. It's all good up the top. Any ideas how I can, or where to get this, fixed. I'm in Sydney.
I opened the battery compartment to have a look, but there is a void sticker over one of the screws. So don't wanna go there unless its a guarantee fix.
Sent from my Desire HD using XDA App
Same problem here.. I can't find replacement part so I have ordered from ebay for shocking price for smallest piece is 19$ :S
thr r apps to control the volume in internal like mini info
Sent from my Desire HD using XDA App
kudoboi said:
thr r apps to control the volume in internal like mini info
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
i think you're totally missing the point. lol
anyway, can't you just push it in? give it a lil force until it snaps back into place. let me know what happens.
just noticed that I can increase volume on my DHD, but can't lower the volume. restarted it, thinking that it might be a sw bug, but it still doesn't work.
is this the issue you guys are experiencing?
hope it's easy to solve, since I'm in Brazil and bought the phone in Germany.
best regards
André
o reverendo said:
just noticed that I can increase volume on my DHD, but can't lower the volume. restarted it, thinking that it might be a sw bug, but it still doesn't work.
is this the issue you guys are experiencing?
hope it's easy to solve, since I'm in Brazil and bought the phone in Germany.
best regards
André
Click to expand...
Click to collapse
André, i really don't think so...
I'm getting same trouble, the button works fine, but the down side (to decrease volume) is a little out, if compared with up side that stays closer to the frame, looks like a "seesaw"... i believe you got a hardware issue...
Sent from my Desire HD using XDA App
I have same design issue. Upper part of button (volume up) is more inside the phone and volume down part sticks a bit out.
Still buttons work as they should.
Sent from my Desire HD using XDA App
I don't exactly have same issue but close.
My volume rockers work, it's just they both are sunken to bottom and haven't that normal touch i've seen on other DHDs
Kindda nasty. Has anybody went to HTC to fix that? I'd love to know before sending... or not
yeah it seemed so for mine too.. but then i dotn have much problem with mine ..
Had a similar problem for me within first 14 days of my contract, just sent it back and got a replacement under warranty with orange. Maybe HTC or your carrier can do the same thing.
arielc said:
Had a similar problem for me within first 14 days of my contract, just sent it back and got a replacement under warranty with orange. Maybe HTC or your carrier can do the same thing.
Click to expand...
Click to collapse
Thanks a lot, this is what I was looking for. I may send it sometime during exams (where I'll miss it less )
Got kind of the same problem, my volume down button is not nearly as responsive as my volume up button.
Got the same problem, my volume down button is not nearly as responsive as my volume up button.
OMG the bottom voice button is so weak..I am afraid of mine now...
my volume button popped out, doesn't sit flush and keep catching.
Added some glue to keep it held down, need to fit a replacement! Anyone know how to?
+1
I have same issue with volume key, seems quite a common problem, surely covered by factory warranty?
Fixed my volume button
I had the exact same problem with my volume rocker, the bottom part was sticking out but the top seemed all right.
I've just fixed it with a bit of glue and by only removing the battery lid.
For what it's worth, here's how I did it.
If you remove the battery lid you can gently pry out the loose end of the volume rocker, just a little so you can see what's supposed to hold it back.
There's a piece of plastic glued to the bottom of the volume rocker that's come partly undone.
I just put a toothpick between the case and the volume button, so it's sticking out.
Then I used another toothpick to get some superglue on the loose piece of plastic.
After that I removed the first toothpick and pressed down on the volume button for a bit.
Now it's all tight and snug like it used to be.
Be careful with the glue so you don't glue the rocker to the case or something.
Hey thanks if my breaks its gonna be useful!
Had this problem, bottom volume became almost completely unresponsive and has really been bugging me for a few months now, so today I took the whole aluminium volume rocker off, slightly different experience to the post above.
Basically it's constructed pretty poorly, the aluminium rocker forms a latch at the top which holds onto the body of the device above where the button is seated.
The bottom of the rocker then has a plastic flap which is glued into a hole to hold the rocker on, this flap had more or less come off for me, seems very poorly manufactured, so I pulled up more and the whole button came off.
The actual volume buttons themselves are very small and these are seated in the housing of the device between this latch at the top and the plastic flap at the bottom. The rocker has two pieces which push down on the buttons to operate them.
Some dirt and grime had built up in there so I scraped that all off first with the head of a Phillips size 00 screwdriver.
I put a very small balled piece of paper on top of the volume down button and it's now working fine again, I just need to glue that flap back down so the rocker doesn't come loose. If the piece of paper is too big the volume rocker won't go down at all so you have to get the size right, relieved to have a working volume button again though.
search the forum, someone wrote how he fixed his button using a bit of superglue. it works like a charm. basically the volume rocker is held onto the phone with a rubber base. with time the rocker comes unglued from the rubber base. if you use something thin, like a toothpick or a small cutting knife you can insert a very small amount of glue between the 2 and glue them back together. just don't overdo it with the glue or you'll end up gluing the rocker to the body! i did it on mine and now it's as good as new
I have two spots under my screen but the are not dust for sure, because they seem to be under the letters, like the are between the LCD panel and backlight? Also I'm noticing I'm starting too get dust starting on the left down side were the home button is?
I bought a iconia a500 that had this issue. It looked like dust particles. I ended up returning it for another.
helikido said:
I have two spots under my screen but the are not dust for sure, because they seem to be under the letters, like the are between the LCD panel and backlight? Also I'm noticing I'm starting too get dust starting on the left down side were the home button is?
Click to expand...
Click to collapse
Sent from my SCH-I510 using XDA App
Hi all.
I returned my black HOX last week because of the screen ripple thing (when you run your finger down the sides of the screen) also the screen seemed to be a tad loose just like so many people have reported on here. So phones4U sent me a white one, I have received it and its worse than the black one now I don't even have to apply any pressure to get the screen ripple. What should I do? should I just put up with the fault or should I change to another phone s3 etc.
Cheers eze
eze2410 said:
Hi all.
I returned my black HOX last week because of the screen ripple thing (when you run your finger down the sides of the screen) also the screen seemed to be a tad loose just like so many people have reported on here. So phones4U sent me a white one, I have received it and its worse than the black one now I don't even have to apply any pressure to get the screen ripple. What should I do? should I just put up with the fault or should I change to another phone s3 etc.
Cheers eze
Click to expand...
Click to collapse
Return it and tell them its a known issue (they should know)
ask for a tested device or enforce a newer batch
SH248 on awards are good
latest SH25 and HT25 seems good
loose screen is a known defect, slight screen ripple on outer edges pressure is normal unless its acting badly
hamdir said:
Return it and tell them its a known issue (they should know)
ask for a tested device or enforce a newer batch
SH248 on awards are good
latest SH25 and HT25 seems good
loose screen is a known defect, slight screen ripple on outer edges pressure is normal unless its acting badly
Click to expand...
Click to collapse
This one is serial SH24, I have literally just had the screen flicker now to, so this phones is defo a faulty one. So the slight screen ripple is normal, I would say my old black one was normal because you had to apply a bit of pressure for the ripple to appear but this white one aint normal. Anyway I have just got of the phone with phones4u and I have managed to arrange to do an exchange in store.
eze2410 said:
So the slight screen ripple is normal.
Click to expand...
Click to collapse
SH23SW, no ripple.
normal is under bit if pressure
I've had two SH25's.
First one had no screen ripple at all but the screen was loose in left bottom corner. I could feel it moving, clicking etc. The backlight was also bleeding from that corner. I returned it and the second one has screen ripple everywhere with light pressure, has a dead pixel and the screen is loose on both sides.
I'm waiting for this one to be replaced. Beginning to wish I wasn't so fussy with the 1st one.
Every HOX will do it under pressure but it shouldn't do it if pressed lightly mines does it but I don't really care as I ain't going to rub sides with a dark screen??
Sent from my HTC ONE X using XDA
sherl645 said:
I've had two SH25's.
First one had no screen ripple at all but the screen was loose in left bottom corner. I could feel it moving, clicking etc. The backlight was also bleeding from that corner. I returned it and the second one has screen ripple everywhere with light pressure, has a dead pixel and the screen is loose on both sides.
I'm waiting for this one to be replaced. Beginning to wish I wasn't so fussy with the 1st one.
Click to expand...
Click to collapse
you second hox was defected due to the extra ripple and the first hox was defected due to screen loose
you should expect a defectless hox where the screen is rock rigid and fit on all sides and only slight ripple under pressure to the outside edges
I know, going to hold out for a perfect one now.
On this one you can see a small red light in the top left behind the screen when you are on a call, is this normal? I didn't notice it on the last one.
Ronan
sherl645 said:
I know, going to hold out for a perfect one now.
On this one you can see a small red light in the top left behind the screen when you are on a call, is this normal? I didn't notice it on the last one.
Ronan
Click to expand...
Click to collapse
normal its the light sensor
i have ripple screen at edge too
is there a way to fix it by mysefl?
hamdir said:
normal its the light sensor
Click to expand...
Click to collapse
I dont think he means that, I had that on my original one its the notification led bleeding through the side of the screen and the case, caused by the screen not being glued correctly.
HT25 here and ripples do occur in the middle of the screen with very light pressure. when i press "send" button on SMS app i get a ripple in the middle of the screen. WTF????
I am rooted at this point and not sure if I should screw around with it. What do you guys think?
MadRed said:
HT25 here and ripples do occur in the middle of the screen with very light pressure. when i press "send" button on SMS app i get a ripple in the middle of the screen. WTF????
I am rooted at this point and not sure if I should screw around with it. What do you guys think?
Click to expand...
Click to collapse
calm down, if it is something u can live with, just forget ahout it. or else, any hardware faults is still covered by warrenty
sent from my CHARRED ONE X~ and click THANKS if I helped.
Kevin Ma said:
calm down, if it is something u can live with, just forget ahout it. or else, any hardware faults is still covered by warrenty
sent from my CHARRED ONE X~ and click THANKS if I helped.
Click to expand...
Click to collapse
I will visit AT&T store and see what can be done. I am still under 30 days.
06/28/12
SH23LW flow-less
MadRed said:
I will visit AT&T store and see what can be done. I am still under 30 days.
Click to expand...
Click to collapse
And also in the wrong forum. Tegra3 One X here.
BenPope said:
And also in the wrong forum. Tegra3 One X here.
Click to expand...
Click to collapse
Screen is a screen, so i don't see a difference which forum it is.
MadRed said:
Screen is a screen, so i don't see a difference which forum it is.
Click to expand...
Click to collapse
lol, true, just see what happens, no one that works at cellphone shops would actually boot into hboot to check ir warrenty, and either way, it should be covered
Sent from my HTC One X using Tapatalk 2
@Op, there are many threads about screen issues already.
Why you don't take a little time to search instead of opening a new thread.
http://forum.xda-developers.com/showthread.php?t=1611294&highlight=screen+ripple
So a few days ago I began to notice that the back of my phone is now creaking, I first heard it when i went to pick my phone up the other morning and it sounded like an old hardwood floor creaking sound, it's progressively gotten worse to where now when i hold my phone during a call if i shift my hand at all the person on the other line can hear it. I was wondering if anyone else had this problem. The creaking seems to be isolated to (if you're staring at the back of the phone) the left half of the phone just below the power button and stops creaking above the phone model number beneath the glass.
parham.derick said:
So a few days ago I began to notice that the back of my phone is now creaking, I first heard it when i went to pick my phone up the other morning and it sounded like an old hardwood floor creaking sound, it's progressively gotten worse to where now when i hold my phone during a call if i shift my hand at all the person on the other line can hear it. I was wondering if anyone else had this problem. The creaking seems to be isolated to (if you're staring at the back of the phone) the left half of the phone just below the power button and stops creaking above the phone model number beneath the glass.
Click to expand...
Click to collapse
Mine is as solid as day 1
Same problem here.
Sent from my LG-LS970 using xda app-developers app
I've noticed this too but after putting my diztronic case over it, the creaking stopped.
My phone rattles when a tap my fingers next to the lens or put the phone down. No creakng yet.
Sent from my Nexus 7 using xda app-developers app
Ive noticed mine on the camera. Whenever i try to tap the back of the phone, it seems like its not perfectly fit or something.
Sent from my LG-LS970
They have a similar thread on the international optimus g page with the same complaint. I wonder if the Nexus owners do to.
Edit: the Nexus has the same issue. Just Google nexus 4 and rattle. Seems pretty wide spread.
Sent from my LG-LS970 using xda premium
kc_exactly said:
They have a similar thread on the international optimus g page with the same complaint. I wonder if the Nexus owners do to.
Edit: the Nexus has the same issue. Just Google nexus 4 and rattle. Seems pretty wide spread.
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
So this makes me curious as to what other defects its going to have, but I'm on to a different issue, phone dropped about 2" and the digitizer broke, so when my new screen comes in i will do a walk through tutorial on how to replace it... starting to wish i had gone with the GS3...
Mine is also doing that. Just started to notice it today. Kinda makes my opinion of the build quality a little less. But still love the phone. Minus the messaging bug. LOL.
Sent from my LG-LS970 using xda premium
If I use my shoulder to hold the phone to my ear I get a creaking sound too. That's the only time I've heard it though. I imagine it has to do with the glass back.
Here, too. It's the camera side, right below it, that creaks. Fortunately, it's only noticeable when I deliberately squeeze it.
Sent from my LG-LS970 using xda app-developers app
solid here....this msg bug you guys are talking about, is it when your typing the sceen jumps and your back at the start of the msg?
Hey, so I just noticed that if I flip the phone over and orient it so the camera is on top, then it will creak when I push on the left side. You can also see the casing move in slightly. It's almost as if it's broken somewhere but you can't see any crack.
I thought the people at Best Buy had said the back was glass but it's looking more like cheap plastic at this point. Is it different on AT&T maybe?
parham.derick said:
So this makes me curious as to what other defects its going to have, but I'm on to a different issue, phone dropped about 2" and the digitizer broke, so when my new screen comes in i will do a walk through tutorial on how to replace it... starting to wish i had gone with the GS3...
Click to expand...
Click to collapse
I dropped mine from chest height and nothing happened to it. That really sucks for you. How much was the replacement screen?
cthedogg said:
I dropped mine from chest height and nothing happened to it. That really sucks for you. How much was the replacement screen?
Click to expand...
Click to collapse
The replacement screen was $130 went with 2 day shipping (Digitizer/LCD Assembly). Just the digitizer was only $60 but it's a good thing I went with the whole assembly because when i was trying to pull the glass out of the housing some of the shards came off by themselves, and revealed that LG "fusing" the glass to the lcd is literally glue covering the entire LCD making it damn near impossible to just replace the digitizer and make it look nice.
Also a few warnings to those disassembling their phones:
1) The battery isnt solid, more like cased in an extreemly soft metal so it will dent if not carefully removed (it's glued into the housing)
2) The chrome edge dent's very easily, have a small ding where i got impatient, TAKE YOUR TIME!
3) When removing the back cover don't cross over the volume rocker, power button, or USB port with the spudger. for the top of the back removal gently push the back cover forward dont try to shove your spudger in their, it wont work lol.
I'm going to be doing a full disassembly guide that's a lot easier to follow than the "engrish" version korea put out for us english speaking techs when my new roll of 3m tape comes in. =P
This cracking is caused by a small piece of sticky under the back cover you can either remove the sticky or ad some more this would prevent the cracking...
I posted a service guide here on XDA search my name for it... It will show how you can remove the back cover... just when taking it off remember the back can crack easy and the plastic can ding or dent rather easy and make sure you don't mess up the power button or the volume buttons
ruthlessbeatle said:
solid here....this msg bug you guys are talking about, is it when your typing the sceen jumps and your back at the start of the msg?
Click to expand...
Click to collapse
I dropped my nexus and damaged glass and frame in corrner really bad(still working).I want to buy lcd+frame from ebay.After search i found this red frame which looks nice.Im interested does anyone have this and how it looks in real life.Tnx in advance
http://www.ebay.com/itm/Red-LG-Goog...433?pt=LH_DefaultDomain_3&hash=item5420722551
slobo2712 said:
I dropped my nexus and damaged glass and frame in corrner really bad(still working).I want to buy lcd+frame from ebay.After search i found this red frame which looks nice.Im interested does anyone have this and how it looks in real life.Tnx in advance
http://www.ebay.com/itm/Red-LG-Goog...433?pt=LH_DefaultDomain_3&hash=item5420722551
Click to expand...
Click to collapse
I know a bit of a Necro on this thread but I thought I would share my experience since I recently did 2 repairs on N5s (one Black one Red). The 2 LCD+Frames I bought from 2 different sellers had the speaker grill sunk in a bit on the front like the glass is thicker. Also on the Red one the grill was sort of a Metallic Red as opposed to the solid Plastic BRIGHT RED on the original. As for issues I ran into the Power button hole being off causing the button to get stuck and not reset fully. It'll be sunk in after pressing it the first time and be slightly raised from the frame. On the 1st one I had to do the "Button Rattle Fix Mod" to get it to seat repeatedly but that still wasn't quite right. On the Red one I fixed I had the same issue with the Power Button and I figured out what was causing the issue. It's actually 2 things: the opening height was just a slight bit smaller than the button itself and caused it to stick in the pressed position and also the seat was raised causing the button to become dislocated in an angular position. Once I figured this out I shave a very TINY fraction of the plastic away from those effected areas and BAM it works like it was an OEM one. As for the Grill I don't know how to fix that other than lifting the Glass from the Frame and I seriously don't want to do that.
I have the Black one (The 1st one I did coming back to me so I'll see if I can post a Vid of the effected areas.
Ohgami_Ichiro said:
I know a bit of a Necro on this thread but I thought I would share my experience since I recently did 2 repairs on N5s (one Black one Red). The 2 LCD+Frames I bought from 2 different sellers had the speaker grill sunk in a bit on the front like the glass is thicker. Also on the Red one the grill was sort of a Metallic Red as opposed to the solid Plastic BRIGHT RED on the original. As for issues I ran into the Power button hole being off causing the button to get stuck and not reset fully. It'll be sunk in after pressing it the first time and be slightly raised from the frame. On the 1st one I had to do the "Button Rattle Fix Mod" to get it to seat repeatedly but that still wasn't quite right. On the Red one I fixed I had the same issue with the Power Button and I figured out what was causing the issue. It's actually 2 things: the opening height was just a slight bit smaller than the button itself and caused it to stick in the pressed position and also the seat was raised causing the button to become dislocated in an angular position. Once I figured this out I shave a very TINY fraction of the plastic away from those effected areas and BAM it works like it was an OEM one. As for the Grill I don't know how to fix that other than lifting the Glass from the Frame and I seriously don't want to do that.
I have the Black one (The 1st one I did coming back to me so I'll see if I can post a Vid of the effected areas.
Click to expand...
Click to collapse
Thank you very much for answer,I have buyed black one from UK not from China and still no issues at all except i think power button is just a litlle bit harder.
slobo2712 said:
Thank you very much for answer,I have buyed black one from UK not from China and still no issues at all except i think power button is just a litlle bit harder.
Click to expand...
Click to collapse
Glad you got it fixed. As for the Power button Yeah that is the same issue I was having. See if you can trim a very tiny amount off the long edges of the hole. That should take care of it. I think it's a common manufacturing defect on the generic ones. Even if you got it from the UK chances are they got a bulk amount from China and just resell them. My black one I ordered was that way as the seller was definitely in the US. But both had the same problems.
Where did u get it from? Link and price if possible please. And was there black available?
Sent from my Nexus 5 using XDA Free mobile app