Related
Capacitive Touch acting up ever since OTA update w/ unlock pattern &Onscreen Keyboard
Has anyone else had problems with their touch input since the OTA update? When I enter my unlock pattern, there a 33% chance it gets screwy with my input, and I must hit the power button to enter it into standby, then turn it back on again in order to get it working.
Also, sometimes when I use the second function letter keys on the onscreen keyboard, (example "k" is also "?" if held down for a second) the second function key does not appear. Upon holding, it just shows the hovering letter ("k" for example) and then it disappears while still holding down.
This happens I'd say 50% of the time.
Anyone else having these problems?
Can a MOD please move this to the EVO 4G General Section, my bad
Can a MOD please move this to the EVO 4G General Section, my bad
Thanks!
Anytime I run a custom rom based off the ota my screen acts crazy..
Sometimes it has a mind of its own and starts pressing stuff by itself..
I've heard others mention it also but apparently not enough people for anyone to look into it though.
MrDSL said:
Anytime I run a custom rom based off the ota my screen acts crazy..
Sometimes it has a mind of its own and starts pressing stuff by itself..
I've heard others mention it also but apparently not enough people for anyone to look into it though.
Click to expand...
Click to collapse
Thanks for your input!
I am running stock though, weird huh?
I'm not too worried, the Froyo update should fix it
kyelerner said:
Thanks for your input!
I am running stock though, weird huh?
I'm not too worried, the Froyo update should fix it
Click to expand...
Click to collapse
mine isnt stock but it is the same ota as you version wise so it has to be something in there.
mine does this too!!!!!!!
I've recently lost the ability to pull down the notification bar in portrait mode. In landscape it works. I can get it to come down in portrait by pressing the menu button then the notification icon, when it's down using this method I can raise it up or down unless I take it all the way to the top. I updated to Fresh 3.5.0.1 and the new radios/wimax/pri/nv the night before. The pull down function worked that night and next morning. I dont' think the update caused this problem since I have reflashed the ROM to a previous version of Fresh and had same issue. I have also restored a backup of a different ROM. Just thought I'd mention that incase someone else has had a similar scenario.
I did drop my phone before this happened but don't no if this was the cause since I only checked to see if the screen was cracked after dropping and don't remember exactly when the bar stopped pulling down, I have no freaking idea.
It's unnerving to have the damn thing not working..
All other aspects of the touch screen seems to work. I downloaded a multi point tester from the market and the touch sensor(s?) seems a little off at the top as to how far up it will follow my finger compared to the bottom. Caused from dropping?
My knowledge of the makings behind the screen are nill so I haven't a clue to what dropping my phone could do to the touch screen things.
Btw has anyone tried to revert back to a pre 3.7 rom with the new radio/wimax/pri/nv and have their phone run like crap? Mine sure did.
Edit: nvm, found this "you cannot run any rom but 3.70 or aosp with pri 1.90"
Any suggestions?
Sounds like It's broken. Try flashing the stock with root 3.70 Rom and wipe everything. I'm going with it needs to be replaced.
Sent From My HTC Evo 4G On The Now Network From Sprint Using Tapatalk Pro!
does anyone know of the mechanics of the phone as to what may have happened to the touch screen when I dropped, I do think this was the cause of my delimma. did something maybe break or somethign shift? any ideas?
No one has taken one apart yet? How disappointing!
I suppose everyone is still in the 1yr warranty from HTC and not ready to go there.
You touch sensors are messed up. If you have TEP insurance, sprint will repair it free.
Sent from my PC36100 using XDA App
This happened to me after my gf thre my phone on the ground. The Sprint Reps won't know what happened, and they'll replace it for free. Make sure it's a new phone instead of refurbished since, refurbished have a tendency of doing the same thing after some time.
Guess it's time to unroot and return for repairs, thanks
I am having a problem where all vibration/haptic feedback will just randomly stop working completely. Then a few hours (and sometimes days) later it will randomly start working again. It will keep working again for a few hours or maybe days, and then randomly stop again. There seems to be no pattern to it.
I have no idea what is causing this. Has anyone else experienced this, or does anyone have any idea how to fix it?
This is extremely frustrating as I am someone who never uses the ringer; I just always have my phone on vibrate.
I'm running the latest stable release of CM 7.1 for the Evo 4G, but I had this happen before on stock Sense as well.
mredmond2012 said:
I am having a problem where all vibration/haptic feedback will just randomly stop working completely. Then a few hours (and sometimes days) later it will randomly start working again. It will keep working again for a few hours or maybe days, and then randomly stop again. There seems to be no pattern to it.
I have no idea what is causing this. Has anyone else experienced this, or does anyone have any idea how to fix it?
This is extremely frustrating as I am someone who never uses the ringer; I just always have my phone on vibrate.
I'm running the latest stable release of CM 7.1 for the Evo 4G, but I had this happen before on stock Sense as well.
Click to expand...
Click to collapse
I am having this same issue as well. It must be software related because the vibrate function works just fine when the phone rings. I am running CM 7.1 stable on an Evo 4G. I noticed the issue as well on CM 7.0.3.1 or whatever the latest stable build was on CM.
Does the phone ever always (or never) vibrate under a certain circumstance? i.e. incoming text, email, incoming/outgoing call, typing, etc.? Also, do you have any toggle widgets that could affect vibrate/ringer status?
I ask this because, and this may sound silly, it may be that you are modifying settings unknowingly. I've had that happen where I have my hands in my pockets and next thing I know I've accidentally got my Facebook up and running and typed half a book in the status field.
Again, I know that sounds silly but I ask because it's happened to me before.
Concordium said:
Does the phone ever always (or never) vibrate under a certain circumstance? i.e. incoming text, email, incoming/outgoing call, typing, etc.? Also, do you have any toggle widgets that could affect vibrate/ringer status?
I ask this because, and this may sound silly, it may be that you are modifying settings unknowingly.
Click to expand...
Click to collapse
That's fine, its an important clarification to make. But no, I am absolutely sure I have not changed any of the options unknowingly. As I said in the OP, ALL vibration/haptic feedback will cease to function entirely. I've often had it happen that in the middle of typing something, the haptic feedback for the keyboard will just go away. Immediately after this if I check the soft key buttons or test the vibration for notifications, none of these will produce any sort of vibration response either. Then randomly a few minutes, hours, or days later, all haptic feedback will just return. Its been an extremely strange and frustrating issue.
4nth0ny said:
It must be software related because the vibrate function works just fine when the phone rings. I am running CM 7.1 stable on an Evo 4G. I noticed the issue as well on CM 7.0.3.1 or whatever the latest stable build was on CM.
Click to expand...
Click to collapse
For me, when the vibration stops working, it stops working for everything, even when the phone rings. But that's what I can't figure out: if it is a software or hardware related issue. I was having this problem on stock Sense, and I figured if it was software related, perhaps flashing a new ROM (in my case, CM7), would fix it. However it hasn't, so I'm beginning to think if it is indeed a software issue, it must be a bug somewhere very deep within the code, otherwise it has to be a hardware issue. But if its a hardware issue, I can't figure out why it would randomly stop/start working like it does, and the thing is, most (75%) of the time, it is working. Its just the other 25% that annoys the hell out of me. That's why I thought I'd ask and see if anyone else had experienced it or found any solutions.
Its a CM7 thing I've noticed it on Xplod, Decks, and CM7 I don't really mind it cuz my ringers are loud as hell but yeah its pretty weird :shrugs:
Usually AOSP ROMs for some reason have that problem cuz on sense ROMs it never happens
infamousteeboy said:
Its a CM7 thing...Usually AOSP ROMs for some reason have that problem cuz on sense ROMs it never happens
Click to expand...
Click to collapse
Well like I said before, I was having this problem on my stock Sense ROM.....
infamousteeboy said:
Its a CM7 thing I've noticed it on Xplod, Decks, and CM7 I don't really mind it cuz my ringers are loud as hell but yeah its pretty weird :shrugs:
Usually AOSP ROMs for some reason have that problem cuz on sense ROMs it never happens
Click to expand...
Click to collapse
I've never had that problem on CM and I've been using many different versions of it for a long time. I don't know if I am lucky or what but people complain about a lot of issues that are claimed to be CM issues....yet I've never had a single one of them.
Concordium said:
I've never had that problem on CM and I've been using many different versions of it for a long time. I don't know if I am lucky or what but people complain about a lot of issues that are claimed to be CM issues....yet I've never had a single one of them.
Click to expand...
Click to collapse
Well I kinda had the same problem that he's run into on CM but I figured it out but I figured since he's had the problem on a sense ROM also then maybe its not the ROM but I jus went into everything that had the option to vibrate and turned them all on cuz I've flashed a couple ROMs and the vibration would be off I try not complain about anything about any ROM its a person hard work they've done for free I try to figure things out on my own as much as possible before I create a thread not bad talkin the OP but jus sayin you know?
I don't think that it's rom related. I've been having issues with my haptic feedback since I got the phone, even before rooting it. I think it's just a crappy vibrator. (If there's a better name than "vibrator", please someone tell me.)
I had vibration problems on my first Evo as well, it was never rooted. My second Evo was a HW004 and the haptic feedback was perfect - it was softer instead of the shock-like haptic feedback I've experienced with my 003s. My current and third Evo is also a 003, so I assumed it had something to do with the motor used in 003s.
I've just turned haptic feedback off. I thought I'd miss it, but I've gotten used to it. I still use have my phone set to vibrate for notifications and calls and I've seen fewer issues.
If you think you can go without, I'd suggest turning haptic feedback off. Otherwise, unroot and take it into Sprint. You may have more luck calling, because if you can't replicate the issue in front of them then they can't do much.
Sent from my Evo + MIUI using Tapatalk!
plainjane said:
I don't think that it's rom related. I've been having issues with my haptic feedback since I got the phone, even before rooting it...
...Otherwise, unroot and take it into Sprint. You may have more luck calling, because if you can't replicate the issue in front of them then they can't do much.
Click to expand...
Click to collapse
Yeah, its definitely not ROM related...I don't know if people aren't reading the posts, but I've said several times that this occasionally happened on stock Sense, both before and after rooting.
Dang. I didn't want to have to bring it in to get it fixed, but I guess that's what I'm gonna have to do if its a hardware problem...I was really hoping it was software related or if someone would know of a way to fix it so that I could avoid dealing with warranty services...I got suckered into the Best Buy warranty, and it turns out that even though they either give you a new or refurbished model, they make you turn yours in and wait 5-7 days for the replacement to come in instead of ordering the replacement and then doing a trade with you when it comes in. I already experienced it once before when my USB port broke... :/
Not being able to replicate the issue is my main concern since sometimes it works and sometimes it doesn't. Trying to get it to stop working at a time when I can actually run out to the store is gonna be a pain...And I really don't want to waste a trip to the Best Buy store only to have it start working again with me trying to tell the GeekSquad Agent, "I promise, I promise! It was broken just 5 minutes ago!!" I can't imagine how many of those they have to deal with....
my wife has the att nitro hd, when the screen goes off during a call sometimes nothing including power button will turn it back on. Anyone know of a fix? did the ATT small update fix this?
Actually it comes back on after a long minute or two. Not very helpful if you need the dialpad or keys, etc.
I have just rooted it for her and installed CWM.
I have added a few proximity tweaks to build.prop
gsm.proximity.enable=false (rebooted twice but screen still goes off)
also used the ro.lg.proximity and the mot.lge.proximity (dont recall exact wording) both were set to a value of 5.
I'll have to take alook into the lg hidden dialer menu to see if I can disable this.
I dont like this sensor on my device either, but I have an option in settings to disable it, which makes it bearable.
thanks for the help guys.
I have noticied LG throws together some junky builds, typos, bad english/grammar. Wonky sensors etc. Incorrect kernel build ReadMe's
I thought I recall someone with another device just placing a peice of tape over the sensor. hmmm..worth a try.
cheers.
chrisrotolo said:
gsm.proximity.enable=false (rebooted twice but screen still goes off)
also used the ro.lg.proximity and the mot.lge.proximity (dont recall exact wording) both were set to a value of 5.
Click to expand...
Click to collapse
Congrats. Today, you learned that most of the "tweaks" found at XDA are utter bull****
aremcee said:
Congrats. Today, you learned that most of the "tweaks" found at XDA are utter bull****
Click to expand...
Click to collapse
What about the tweaks that aren't BS? Are they already included in your CM9 builds?
From what I can tell, pretty much the main thing that build.prop is good for is providing information about the system and software (i.e. info about the build). It's not really used much for useful configurations as far as I know.
networks tweaks actually have doubled me download speed.
I still have faith.
but can anyone answer my questions I posted in ICS SLim thread and PM'ed Andasa , no responses yet.
does ICS slim or CM9 have option to keep lcd no during call? and does it work??
what's working not working? I found changelogs but not a working/not working list for CM9.
and has anyone successfully restored a nandroid from ICS to GB without real issues?
thanks guys.
i doubt the ota fixed your issue as the issue is not one that occurs for every nitro.
I can tell you that when I make a phone call they screen stays no.
what's working not working, well, many of us are running it daily with no probs.
as you prolly know, it is a nightly build so a public list of what's working or not isn't rly part of the deal.
i've succesfully restore a nandroid from both slim and cm9 back to the stock att rom and others many many times. dozens.
thanks good enough.
I will have to give it a go.
would you recommend one or the other?
CM9 or slim?
thank you.
well, I like them both a lot. slim is just a trimmed down version of cm9 and i _think_ it does run just a bit snappier........maybe..but it's not wildly different from cm9. I usually switch back&forth throughout the day.
There's no setting in CM9 to disable the proximity sensor, although there may be a way to do it.
We just got a Nitro HD for my wife and her phone also has this issue. I have not gotten to know the phone well enough to try rooting or anything else of that nature, it's pure stock.
When she makes a call the screen turns off immediately after hitting the call button and will not wake up. When she receives a call we get a glimpse of the in-call screen with the various buttons etc but then the screen turns off. If the other party hangs up her screen turns back on, but if she calls something automated, like voicemail, she can't do anything except pull the battery to disconnect.
I've tried putting my thumb over the proximity sensor, hitting all buttons including power, and nothing makes the screen wake up or turns the phone off other than a battery pull.
The phone was running a build from last November when we first got it (V10i?) and today prompted us to update, so I did that hoping it would solve the problem. The phone is currently on V10j, but the problem persists.
Any help?
no driver said:
We just got a Nitro HD for my wife and her phone also has this issue. I have not gotten to know the phone well enough to try rooting or anything else of that nature, it's pure stock.
When she makes a call the screen turns off immediately after hitting the call button and will not wake up. When she receives a call we get a glimpse of the in-call screen with the various buttons etc but then the screen turns off. If the other party hangs up her screen turns back on, but if she calls something automated, like voicemail, she can't do anything except pull the battery to disconnect.
I've tried putting my thumb over the proximity sensor, hitting all buttons including power, and nothing makes the screen wake up or turns the phone off other than a battery pull.
The phone was running a build from last November when we first got it (V10i?) and today prompted us to update, so I did that hoping it would solve the problem. The phone is currently on V10j, but the problem persists.
Any help?
Click to expand...
Click to collapse
If you bought it from a store, get it exchanged for a new one.
actually works much faster on cm9, but therr still should be an optin to keep lcd on during call. i found some free apps that will disable hardware drivers but cant find the name of the proximity sensor driver, only that is named LGE.
Unfortunately it was given to us by a friend after my wife lost her Captivate, so taking it to a store to exchange is probably not going to work too well. As far as I can tell it was never used before we got it--the battery was still in it's own sealed pouch, the texting and driving warning was on the phone, and the phone went through the whole initial setup routine--but they didn't send us the box, I guess to cut down on mailing costs. I was hoping there was a known solution.
Ok, I downloaded two proximity sensor test apps today, but neither showed any activity. On my Captivate I get different readings with Proximity Sensor Finder (market link), but on the Nitro it is stuck at 3cm and it doesn't register anything no matter where I put my hand over the phone.
Can someone whose phone works right try installing this app and make sure that it picks up different readings on this device? OP, if you are still having issues, can you also try this app and see if it is static for you?
Thanks.
Took off the screen protector that they installed at the AT&T store and now the proximity sensor works just fine. OP, do you have a screen protector on your device?
we had an awfully thick one from att. we have since changed it to a super thin one. screen off is not a real problem on cm9, however i feel all devices should have the option to disable proximity sensor/keep lcd on during calls.
It's worth trying to use the warranty on the phone. Even though you dont have the original sales reciept, the phone has been released for less than a year, so no matter when you bought it, it is still within it's year long guaranteed warranty window.
Finished reading the thread, I suppose this post is now irrelevent
So most of us know about the System UI crash when using Chromecast, but this is even stranger. [Edit: an OTA update fixed this.] Some times, when I wake my phone up at the lockscreen or at times in the middle of a call - the touch screen stops responding. I can press and/or hold the volume buttons and there is a response on screen but I can not interact with the phone at that point. I can't continue to do battery pulls everytime. This is crazy. I'm on stock software. No crazy mods or anything. I've done a reset in the past and flashed the stock package again but this still happens every few hours. Only happens when the screen just wakes up...
Edit: This is a confirmed fix for me.
If you face the same issue, try:
open dialer
press 3845#* INSERT THREE DIGETS OF YOUR MODEL NUMBER THE PRESS #, for example, I am the F400K, so 3845#*400#
Hardware Device Test > Touch
update touch firmware
touch firmware version
wait 10 sec
reboot
I would say there is a misbehaving app causing the phone to lag in wake (that is all the unresponsiveness will be, extreme lag).
Sent from my Nexus 5 using Tapatalk
@Lennyuk - tried for over 30minutes after leaving it alone, I doubt it's a delay... Battery pulls work, but that's not the point.
deedscreen said:
@Lennyuk - tried for over 30minutes after leaving it alone, I doubt it's a delay... Battery pulls work, but that's not the point.
Click to expand...
Click to collapse
That was not his point.....to Find the app that is causing it go one by one uninstalling until you find it.... Something probably to do with app and the screen
Sent from my SM-N900P using Xparent BlueTapatalk 2
Epix4G said:
That was not his point.....to Find the app that is causing it go one by one uninstalling until you find it.... Something probably to do with app and the screen
Sent from my SM-N900P using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
Totally agree with @Epix4G on this one. I am assuming you had a korean variant? The SK Telecom stock image is pretty ugly. Took me 3 debloat attempts before I had it behaving the way I wanted it to, but before I debloated, I had some lag issues (SK Telecom... grrrhhh).
Historically, Korean carriers (much like AT&T and Verizon) love putting useless junk on the phones for "productivity" but really they are there to charge Korean users more for other services, etc.
If you haven't done so, I would root and debloat, and see how big of a difference it makes (absolutely amazing performance after debloating on my F400S).
^^^^ - Will take that into consideration.
This may be a possible fix for now, can't yet confirm
open dialer
press 3845#* INSERT THREE DIGETS OF YOUR MODEL NUMBER THE PRESS #, for example, I am the F400K, so 3845#*400#
Hardware Device Test > Touch
update touch firmware
touch firmware version
wait 10 sec
reboot
It may or may not help
EDIT: It's been a few weeks and I haven't had this issue again. Usually every 4-6 hours it used to happen after powering on the screen, but so far so good.
Tried that with 855 version, it's not working. This is REALLY depressing as i just got a new phone and from day one i'm having this problem. I just can't believe LG screwed up like this, and there's no mention of this anywhere online other than this XDA thread. I hope i don't have to root and install custom rom as this really defeats the purpose of the phone.
@deedscreen
I'm having exactly the same problem on an 850 and tried your firmware method. The version number of the firmware did not change after reboot.
ic_fw_version info
SYnaptics 5.5
PanelType 1
version: v1.22
IC_product_id[PLG313]
Touch IC : s3528(family_id = 1, fw_rev = 1)
What version is your firmware? Also, did you find out about the fix from somewhere?
I have the F400K, but just got a US T-Mobile edition, (I'll eventually switch my signature). I would honestly suggest waiting for an OTA update. Call LG so they can document this. If that touchscreen update method doesn't work, I'm not sure what to do. I found the method somewhere online, I don't recall where exactly. If someone can figure out how to side load the touch screen firmware from a working Korean model to others, that would be great. For now, keep calling LG. It won't do much at first, but at least they'll have reports of this issue.
I have (RAW) touch screen firmware version: 30 05 51 96
Same problem, but not only on lock screen
Since 5 days I have my G3 (855 Modell). I was happy the first two days, then I discovered the problem, that the device is always unlocking itself, when in my front pocket. It's because of the Knock on feature. I deactivated this now.
But since yesterday i have the same issue: three times, i was unable to unlock my phone. The touchscreen simply did not respond. I had to remove battery. Today, I read this post and tried the firmware update of the touch, but I have the impression it did not change something in the version.
After this, today I had again once time the non responding touch while unlocking and shortly after, I had the issue after ending a phone call! The touch did no longer respond and had to remove the battery again!
I hope this is not a hardware issue, otherwise I will hurry up to the seller to exchange the phone, because its only 5 days old.
This is happening when the screen is on right? Or is the screen turning off and then not turning I again?
You need to keep Knock feature on, someone already said this. That's why your screen is freezing.
Daum Ex said:
You need to keep Knock feature on, someone already said this. That's why your screen is freezing.
Click to expand...
Click to collapse
Upps, yes, I just read this message now. To late: I was in the shop now and got mine exchanged. Anyway, that issue with the knock on feature should be solved also by LG: it's not acceptable, that the phone is always unlocking in my pocket.But then I wait with deactivating knock on for the moment.
So bad: such a good phone and such an annoying bug
icon71 said:
Upps, yes, I just read this message now. To late: I was in the shop now and got mine exchanged. Anyway, that issue with the knock on feature should be solved also by LG: it's not acceptable, that the phone is always unlocking in my pocket.But then I wait with deactivating knock on for the moment.
So bad: such a good phone and such an annoying bug
Click to expand...
Click to collapse
I sold mine after a few days, i was sick with it. I disabled the knock feature through the hidden menu only to have the screen freeze every day. What, i can't use the phone the way i like? I have to face the screen outwards in my pocket and risk damaging it? Screw that...
That, plus the overheating and horrible build quality (back got scratched in my pocket) was a deal breaker for me...
Daum Ex said:
I sold mine after a few days, i was sick with it. I disabled the knock feature through the hidden menu only to have the screen freeze every day. What, i can't use the phone the way i like? I have to face the screen outwards in my pocket and risk damaging it? Screw that...
That, plus the overheating and horrible build quality (back got scratched in my pocket) was a deal breaker for me...
Click to expand...
Click to collapse
Yes, indeed i also think about it. I got an official statement from support, regarding that the phone is unlocking all the time by itself in my pocket. They told me stuff like:
- this is a normal behaviour and can happen (!!)
- don't put your phone in the front pocket
- use the quick circle case to prevent...
- disable knock on (which is at least not possible over a standard setting, but only via the hidden menu).
I wrote back:
- that for me, this is not a normal behaviour
- that 90% of male users are wearing the phone in the front pocket
- that I don't like to buy a case only to prevent a bug of a premium telephone and
- finally, that they please could tell me, where and how to disable knock on
I am curious about their answer...
Good luck with that, disabling it through the settings doesn't change anything and they probably won't have a fix for months. They'll probably fix it though Android L update which will sadly come 6 months from official release at least.
Next time i purchase an Android phone i'm going with Nexus line...
icon71 said:
Since 5 days I have my G3 (855 Modell). I was happy the first two days, then I discovered the problem...
Click to expand...
Click to collapse
So what happened? How is it doing now?
Hey everyone, I just wanted to report my results of this touchscreen bug.
Well, I've only had my D851 for a week now. Of course I rooted it the same day I received it.
I had no touch issues until after restoring apps with Titanium Backup. I'd restore all user apps, then very few system app via XML. Since I just upgraded from a Galaxy S3 T999 I limited the system apps greatly. So much in fact that I only restored 1 system app......Media Storage 4.4.4 (Playlist). THAT WAS MY SCREEN KILLER!
The media scan on my D851 would render my screen unresponsive. I could only hold the power button and click power off or restart or whatever else was on that power menu. Then the phone would reboot after minutes of of a dead screen.
I flashed back to stock and reproduced the same issue. So now I've been running this device for 3 days without any screen lockups. I just have to rebuild my playlist again LOL.
I hope this helps someone here.
Knock
If you turn off the ability to wake by knocking the screen, it causes this issue where the screen locks. Turn it back on and the problem seems to go away.
I think LG really has to deal with this issue.
Hi guys, I have red a lot about this issue but I'm still confused with my LG G3 855.
First I realize problem with unlocking the phone using double click. Tried to upgrade touch software firmware using hidden menu and the screen became almost totally unresponsive. Tried to re-flash original 5.0 and 4.4.2, factory reset, battery removed, etc. but no luck.
I'm wonder if this is a software problem or became hardware. Should I consider replacing display or problem is in motherboard?
I really don't know what to do! Appreciate any comments or suggestions!!!
Thanks in advance!