Related
Please use l1q1d's 11/23 2.6.32 kernel.
This build is made for a different installation. Basically the SYSTEM is installed in NAND but the DATA is installed in the ext2 partition of SD. It will only work with this kind of installation. The reason for making this build is for having bigger size of data partition and also minimize the data corruption on reboots or hang. Only issue is that you can't unmount SD while using the device bec it will hang up.
Please have an SD with class 4 or better (I recommend class 6) before doing this type of installation. Here are how the partitions should be on SD. 3 Partitions.
FAT/ext2/ext2
Make the middle partition as small as possible, third partition (which will be your data install) about 256 or more.
Then install using
System on NAND
Data on SD partition
Here is the link for this installation
http://www.4shared.com/file/vKfebIbA/androidinstallsd.html
Just rename to androidinstall.tgz and thats it.
Don't be afraid to overclock since reboots are better tolerated.
Will test now, thanks
i need just to create a folder with name andboot and place your file there after rename?
vijovame said:
i need just to create a folder with name andboot and place your file there after rename?
Click to expand...
Click to collapse
Yes, put it in the FAT partition. Make sure you have 3 partitions coz data will install in 3rd partition.
clemsyn said:
Yes, put it in the FAT partition. Make sure you have 3 partitions coz data will install in 3rd partition.
Click to expand...
Click to collapse
is my first time doing this, i found that i need to keep center button pressed to get the menu for install... lol
by the way, the x at the beginning looks great, waiting until loads, thanks
wow, its working!!!! thank you! i will test more and let you know
clemsyn said:
Please use an SD with class 4 or better (I recommend class 6) before doing this type of installation. .
Click to expand...
Click to collapse
Too Bad I don't know what class mine is lol. Class is only with SDHC. My 2GB mico SD gets about 6 MB/s write speeds so I think its around class 6 speeds but i'm not certain.
Since yesterday I try my HTC TyTN II with Android to flash. But it does not work. I've done everything as you have described. I had before WM 6.5.5 with 3.34 HardSPL and Radio 1.70.xx.x installed. And now I can't use my HTC.
I get the error message "umount: can not unmout /data: Invalid argument" when I install the System.
Pls help me to get Android on my HTC.
//EDIT: I became also the Errormessage "Failed, Install module for this kernel"
I had three partitions, the first is FAT32 with 3776MB, the second is ext2 with 64MB and the third is also ext2 with 256MB.
I create the partitions with Atool.
//EDIT: Now I cant format my SD-Card. I become the Message "Failed to format [ 8.283438] save exit: isCheckpointed 1"
Which settings did you select on atools?
I downloaded the latest Kernel (2.6.32) and opened it with Atool. Then I changed the device from Vogue to Kaiser and downloaded the latest Release.
The Resolution is 240x320, Version Froyo, Panel Type Auto and Key Map Normal. I didnt change the Fstaboptions, i let all three on Auto.
Then i saved it as KAISIMG.nbh.
Now i created the androidinstall.tgz with the file from here:
http://www.4shared.com/file/vKfebIbA...installsd.html
Then i created the *.sh file with this settings:
Setup Space:
Partition System -> Nand
Partition Data -> SD Partition
Mark both Erase
Simple Actions is on Advanced Mode
SD Partitions:
Disk Size: 4
Numbers of Partition: 3
Partition1: 3776MB fat32
Partition2: 256MB ext2
Partition3: 256MB ext2
and i marked "Use SD partioner" then is saved.
I copied the KAISIMG.nbh on the root of my SD-Card and the androidinstall.tgz and install-seq.sh in the "andboot" folder.
clemsyn said:
FAT/ext2/ext2
Make the middle partition as small as possible, third partition (which will be your data install) about 256 or more.
Click to expand...
Click to collapse
Clemsys why does the second partition needs to be as small as possible? Is there a performance drop with bigger partition or you only suggesting it to not waste space?
probaly the sd is now partitioned so retry without selecting sd partitioning.
l1q1d said:
probaly the sd is now partitioned so retry without selecting sd partitioning.
Click to expand...
Click to collapse
I reparted the SD in the Originalpartition. It is possible to create the partitions with Partition Magic?
yes, sure, try with it
-Arturo- said:
Clemsys why does the second partition needs to be as small as possible? Is there a performance drop with bigger partition or you only suggesting it to not waste space?
Click to expand...
Click to collapse
because it /data installs on the third partition.
Android works!!!!! *yeaaaaah* Thx for the help!!!!
I still have two questions.
1. Is there a german languagepack available?
2. Can I delete the andboot Folder and the KAISIMG.nbh on my SD?
i have some problem here and i want to ask some question:
1)if i make install-seq.sh i should use Gparted to make partition on my SD cart?
2)when i use install-seq.sh it should be install automatic?
3)if it install on SD cart how i can understand?
elber said:
1)if i make install-seq.sh i should use Gparted to make partition on my SD cart?
Click to expand...
Click to collapse
I make the partitions with Atool. You can also create the partition with Gparted.
elber said:
2)when i use install-seq.sh it should be install automatic?
Click to expand...
Click to collapse
Yes, with the install-seq.sh you let install automatic.
elber said:
3)if it install on SD cart how i can understand?
Click to expand...
Click to collapse
What do you mean? You need three partitions on the SD-Card.
I make it like this: (I have a 4GB microSD)
First Partition is fat32 with 3776MB
Second Partition is ext2 with 64MB
Third Partition is ext2 with 256MB
You must say Atool that the Data must be installed on the SDpartition3 at the Fstab in Atool!
should i rename install-seq.sh to a new name ?if yes what name should i rename it?
elber said:
should i rename install-seq.sh to a new name ?if yes what name should i rename it?
Click to expand...
Click to collapse
No, you dont rename it! oO
Save the install-seq.sh file in the andboot Folder on your SD!
//EDIT: To create the partitions with atools, you must mark the Option "Use SD partitioner"!!!
I have been using a custom ROM for a while now and I have been seeing in the thread that many people are using ext4.
I have asked many times in the thread and recieved no reply.
So my question to you is what is "ext4" and what bennifit will it be to me as a Desire owner.
Thanks
wh000sher
1. Google is your friend
EXT4 is a file format used by Linux (Android = Linux). When threads talk about EXT4, they are referring to creating an EXT4 partition on your SD-Card e.g. have 14GB FAT32 and 1GB EXT4 (from 16GB SD-Card.. 1GB is always non-existent)
What having an EXT4 partition enables you to do, is to have Apps/Data2EXT scripts which move apps to the EXT partition, giving you a lot more internal space.
bortak said:
1. Google is your friend
EXT4 is a file format used by Linux (Android = Linux). When threads talk about EXT4, they are referring to creating an EXT4 partition on your SD-Card e.g. have 14GB FAT32 and 1GB EXT4 (from 16GB SD-Card.. 1GB is always non-existent)
What having an EXT4 partition enables you to do, is to have Apps/Data2EXT scripts which move apps to the EXT partition, giving you a lot more internal space.
Click to expand...
Click to collapse
I smell a follow up question lurking...
via xda app
stankyou said:
I smell a follow up question lurking...
via xda app
Click to expand...
Click to collapse
How do I make EXT4 -__-
Which Ext4 is the best for me?
777ace said:
Which Ext4 is the best for me?
Click to expand...
Click to collapse
For a second there, I thought you were serious. Almost had me bro, almost had me.
bortak said:
For a second there, I thought you were serious. Almost had me bro, almost had me.
Click to expand...
Click to collapse
Hahaha
Sent from my HTC Desire using xda premium
bortak said:
1. Google is your friend
EXT4 is a file format used by Linux (Android = Linux). When threads talk about EXT4, they are referring to creating an EXT4 partition on your SD-Card e.g. have 14GB FAT32 and 1GB EXT4 (from 16GB SD-Card.. 1GB is always non-existent)
What having an EXT4 partition enables you to do, is to have Apps/Data2EXT scripts which move apps to the EXT partition, giving you a lot more internal space.
Click to expand...
Click to collapse
Ah okay and can't I Do that already with the built in app moving??
I know how to make the ext4 but didn't know why I would want to?
Wh000sher said:
Ah okay and can't I Do that already with the built in app moving??
I know how to make the ext4 but didn't know why I would want to?
Click to expand...
Click to collapse
Moving some of the app data to the sd-card is different to having an EXT partition and A2SD.
If you activate A2SD, the system will install and store your apps on the EXT partition, and your internal memory will not be filled up, and will remain at xxxMB. Furthermore, with an EXT partition you can use D2EXT, which makes your phone use the EXT partition as the data partition, so if you have 1GB EXT4, your phone will see 1GB memory.
If you use the inbuilt "move to sdcard" function, it only moves some of the sd-card to the android-secure folder on your sd-card, however your internal memory is still used up.
In addition, moving apps to sd-ext partition doesn't break app widgets like the stock app2sd method that Gingerbread use.
stankyou said:
In addition, moving apps to sd-ext partition doesn't break app widgets like the stock app2sd method that Gingerbread use.
Click to expand...
Click to collapse
Reason: With A2SD / DATA2SD / etc. Android still "thinks and tells" the Apps are still installed in the internal memory (at least this tells me my logic).
MatDrOiD said:
Reason: With A2SD / DATA2SD / etc. Android still "thinks and tells" the Apps are still installed in the internal memory (at least this tells me my logic).
Click to expand...
Click to collapse
That's how I see it as well. And makes apps available to use when you have it on usb transfer mode.
via xda app
MatDrOiD said:
Reason: With A2SD / DATA2SD / etc. Android still "thinks and tells" the Apps are still installed in the internal memory (at least this tells me my logic).
Click to expand...
Click to collapse
MatDrOid, since you are also on MW. How do I make use of my ext4 partition I created?
I am guessing there is a way to just move to the ext4 via a app?
Wh000sher said:
MatDrOid, since you are also on MW. How do I make use of my ext4 partition I created?
I am guessing there is a way to just move to the ext4 via a app?
Click to expand...
Click to collapse
if it's MW based on oxygen, instructions on how to enable ext4 partition are in the first post, no need to use an app.
No it's the cm version using s2e and I think it's working lol
Sent from my HTC Desire using xda premium
ext4 creation
neither easeus or minitool has an option to create ext4. how do i create the ext4? and i'm going to be dual booting wp7, so should it look like this:
ext4
fat32
wp7 partition
or like this:
fat32
ext4
wp7 partition
??? plz help
noobinius said:
neither easeus or minitool has an option to create ext4. how do i create the ext4? and i'm going to be dual booting wp7, so should it look like this:
ext4
fat32
wp7 partition
or like this:
fat32
ext4
wp7 partition
??? plz help
Click to expand...
Click to collapse
backup your sd card 1st
then use only 4ext recovery (requires s-off to change recovery) or gparted to create your partition (step 5 here)
sorry if i bump old post
Can i access my internal memory once i use Ext4?
nestleomega said:
sorry if i bump old post
Can i access my internal memory once i use Ext4?
Click to expand...
Click to collapse
With a root file explorer.
Hey,I am going to "clean" install CM 7.2 Stable.I am done with Custom MTD Partitions and want to set up an ext partition on the SD card and move apps there.
Preparing for "S2E"(simple2ext:https://play.google.com/store/apps/details?id=ru.krikun.s2e&hl=en )
I have got 2GB SD Card.
What should be the ideal configuration for a 2GB card in terms of :
(1)Ext Size
(2)Swap size
And what should it be ? Ext2 or Ext4 ?
According to this :http://forum.xda-developers.com/showthread.php?t=1432459
“Choose Ext2, Ext3 or Ext4 for partition type based on whether your kernel supports Ext4. If it does choose it! If you don't know choose Ext2 to be safe.” Now how to find out whether your kernel supports it or not ?
Does "swap" really make any difference ?What’s up with this “swap” partition ?
It’s so confusing.Some people claim that “swap” is like virtual RAM and more RAM means a more efficient (and faster) device.
Here are the posts supporting “swap” :
http://www.mod2xtreme.com/showthrea...crease-RAM-using-Swap-File-and-Swap-Partition
http://forum.cyanogenmod.com/topic/...-the-wildfire/page__gopid__330791#entry330791
http://forum.cyanogenmod.com/topic/44675-how-to-configure-a-sd-ext-on-htc-buzz-wildfire/
While according to “Cyanogenmod” (http://wiki.cyanogenmod.com/wiki/Swap_and_Compcache ) and some member swap doesn’t make any diff .on android devices.
If that’s true and swape is useless then why so many forums going gaga over it on XDA at the first place ???It makes no sense. So bewildering.
Any suggestion ?Any help would be much appreciated.
Thanks.
You should try 256Mb or 512Mb ext2 partition as per your convenience with 0 swap size.
After partitioning your card you need to install an a2sd script and use a2sdgui app to move apps.
Or else you could install link2sd app and i guess that moves apps to ext partition without needing a script.(haven't tried it though)
Wasimk32 said:
You should try 256Mb or 512Mb ext2 partition as per your convenience with 0 swap size.
After partitioning your card you need to install an a2sd script and use a2sdgui app to move apps.
Or else you could install link2sd app and i guess that moves apps to ext partition without needing a script.(haven't tried it though)
Click to expand...
Click to collapse
Thanks for the reply,so you mean "swap" doesn't make any difference in speed and efficiency ?
I am a bit baffled.How about "S2E (simple2ext)" method ?
I have read about that here :
http://forum.xda-developers.com/showthread.php?t=1189249
Is that a good idea ?Any suggestion ?Any help would be appreciated.
Thanks
optimusodd said:
Thanks for the reply,so you mean "swap" doesn't make any difference in speed and efficiency ?
I am a bit baffled.How about "S2E (simple2ext)" method ?
I have read about that here :
http://forum.xda-developers.com/showthread.php?t=1189249
Is that a good idea ?Any suggestion ?Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
Have a nandroid backup and give it a try.
Wasimk32 said:
Have a nandroid backup and give it a try.
Click to expand...
Click to collapse
Okay,What about "swap" ?
Why do some guys use swap ?Is it unnecessary ?
Here ost #12:
http://forum.xda-developers.com/showthread.php?t=1189249&page=2
What should it be ? ext2 or ext4 ?
optimusodd said:
Okay,What about "swap" ?
Why do some guys use swap ?Is it unnecessary ?
Here ost #12:
http://forum.xda-developers.com/showthread.php?t=1189249&page=2
What should it be ? ext2 or ext4 ?
Click to expand...
Click to collapse
Swap is used when you run out of RAM space.I dont think we need it on our wildfire.Just select 0 as swap size.create SD partition from recovery,that would be easy as you don't need to be confused between ext2 or ext4.
Wasimk32 said:
Swap is used when you run out of RAM space.I dont think we need it on our wildfire.Just select 0 as swap size.create SD partition from recovery,that would be easy as you don't need to be confused between ext2 or ext4.
Click to expand...
Click to collapse
I have read in some forums that "swap" increases the RAM i.e more speed and efficiency,no ???
Here is the page:
http://www.mod2xtreme.com/showthread.php?13050-SGY-GUIDE-Increase-RAM-using-Swap-File-and-Swap-Partition
Just wondering,if that can be done on Wildfire.
Android apps are specially programed to write out very specific information, making Android's Memory Manager more efficient that swap.
Sent from my GT-I9100 using xda premium
Scratch0805 said:
Android apps are specially programed to write out very specific information, making Android's Memory Manager more efficient that swap.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
That means this "swap" thing is just a hype and of no use on Android devices ?
optimusodd said:
That means this "swap" thing is just a hype and of no use on Android devices ?
Click to expand...
Click to collapse
You've kind of answered your own question with the link you've provided, if you think swap may be worth using, backup your SD card create a swap partition and give it a run for a while, if you think it isnt then backup everything again and create a partition without it. I had swap enabled when I first created a partition but saw no benefit at all.
Sent from my GT-I9100 using xda premium
Scratch0805 said:
You've kind of answered your own question with the link you've provided, if you think swap may be worth using, backup your SD card create a swap partition and give it a run for a while, if you think it isnt then backup everything again and create a partition without it. I had swap enabled when I first created a partition but saw no benefit at all.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Okay,I am thinking of giving this "swap" thing a try.:fingers-crossed:
Again,I have got a 2GB SD Card.
What should be the ideal configuration for a 2GB card in terms of :
(1)Ext Size (What should it be ? ext2 or ext4 ?)
(2)Swap size
Any suggestion ?
I am gonna flash CM 7.2 Stable and use "S2E (simple2ext)".
optimusodd said:
Okay,I am thinking of giving this "swap" thing a try.:fingers-crossed:
Again,I have got a 2GB SD Card.
What should be the ideal configuration for a 2GB card in terms of :
(1)Ext Size (What should it be ? ext2 or ext4 ?)
(2)Swap size
Any suggestion ?
Click to expand...
Click to collapse
I am gonna flash CM 7.2 Stable and use "S2E (simple2ext)".
optimusodd said:
I am gonna flash CM 7.2 Stable and use "S2E (simple2ext)".
Click to expand...
Click to collapse
I successfully made sd-ext and moved apps there (http://forum.cyanogenmod.com/topic/44675-how-to-configure-a-sd-ext-on-htc-buzz-wildfire/), so now I have 170 MB of free space for new apps!!
Question: I noticed that my phone slowed down a lot.... does it depend on SD type (read/write speed)?
Which is the best type / brand of SD?
Is there any other setting I could optimize for speed, when having Sd-Ext enabled?
marcellen said:
I successfully made sd-ext and moved apps there (http://forum.cyanogenmod.com/topic/44675-how-to-configure-a-sd-ext-on-htc-buzz-wildfire/), so now I have 170 MB of free space for new apps!!
Question: I noticed that my phone slowed down a lot.... does it depend on SD type (read/write speed)?
Which is the best type / brand of SD?
Is there any other setting I could optimize for speed, when having Sd-Ext enabled?
Click to expand...
Click to collapse
Moving Applications data to sd-ext slows your phone down.Don’t move “application data” to sd-ext.
I suppose you are using “S2E”,right ?What’s the format of your sd-ext ? ext3 or ext4 ?
Go through this thread :http://forum.xda-developers.com/showthread.php?t=917377
Personally, I prefer“S2E”(supports mounting sd-ext as ext4)
https://github.com/OlegKrikun/S2E
https://play.google.com/store/apps/details?id=ru.krikun.s2e&feature=search_result
(It works only with CyanogenMod7 and CyanogenMod9 )
Other apps you can use :
https://play.google.com/store/apps/details?id=com.buak.Link2SD&hl=en
https://play.google.com/store/apps/details?id=com.a0soft.gphone.app2sd&hl=en
Yes ,your card’s speed depends on the class of your card. An SD card's speed is measured by how quickly information can be read from, or written to, the card.Speed varies with the class of the card…Class 2 (2 megabytes per second), Class 4 (4 megabytes/second),Class 6 (6 megabytes/second) and so on…
You can find reviews here :
http://www.testfreaks.com/memory-cards/
Will be helpful:
http://forum.xda-developers.com/showthread.php?t=826836
http://www.kenrockwell.com/tech/sd-speed-test-2009-10.htm
You might be looking for these apps : (Read the description carefully before installation)
https://play.google.com/store/apps/details?id=ru.krikun.freespace
https://play.google.com/store/apps/details?id=ales.veluscek.sdtools
https://play.google.com/store/apps/details?id=de.mehrmann.sdbooster
https://play.google.com/store/apps/details?id=com.vaelek.sdspeedboost&hl=en
Some other hacks you can try : (Do It At Your Own Risk! I have never tried them)
http://www.androidpolice.com/2011/0...-200-with-a-simple-tweak-hands-on-benchmarks/
http://forum.xda-developers.com/showthread.php?t=1010807
If you are running out of internal memory,you can increase it through Custom MTD Partition :
http://forum.xda-developers.com/showthread.php?t=1233340
HTH,Cheers!!
I used ext3, what experience do you have with ext4?
marcellen said:
I used ext3, what experience do you have with ext4?
Click to expand...
Click to collapse
It's working great and ext3 should work fine too.
Acually ext4 provides better performance with journalling.
If you use an Old CWM recovery, it will convert it back to ext 3 when you backup/restore.
ext3=ext2+journalling
As ext4 is newer file system,new features have improved the performance and reliability of the filesystem when compared to ext3.
Journaling can be bad for the life of an sd-card (coz you do more writes).If you are not worried about life of the card, and the choice is based on filesystem performance only then ext4>ext3>ext2.
Ext4 can be used with journalling switched off.So "ext4 without journalling" will be best in my opinion.
There is a debate going on over it,check that out :http://forum.xda-developers.com/showthread.php?t=800353
Hello. I am new to this forum. I am curious how many people really use a swap partition and what is the method of of using swap in htc wildire s?
I am well aware of Linux OS and understand the need of swap but in case of android does it really improves something?
Hi.I will try to explain you what i know: :laugh:
-swap partition is needed to work some ROM's,combinated with ext partitions.
-you can create swap partition with MiniToolWizard
-in same time,you can create with CWM recovery.
If you need,i will give you a link for MiniTool.
If i helped you,please click "Thank's" button.Have a nice day !!
Does android automatically detect SWAP Partition on SD Card and utilize it automatically?
Yes(i think).
Sent from my HTC Wildfire S A510e using xda app-developers app
does it? i thought the kernel had to had zram enabeled to allow swap use? i might be wrong though..
Most roms auto-detect, but I'd recommend checking with the devs before partitioning your sd card.
Also, unless you have a class 6 or upwards, it won't really do any good.
omnomnomkimiiee said:
Most roms auto-detect, but I'd recommend checking with the devs before partitioning your sd card.
Also, unless you have a class 6 or upwards, it won't really do any good.
Click to expand...
Click to collapse
Where did u find that info?? Is class 4 mmc that bad????:s
never use a swap partition on any android phones. It does no good. The swap partition are made with your sd card which is more than 10 times slower than your internal memory. When an app is loaded or is sent to swap partition cache memory, it takes time to copy or load the files.
Android already has a system for moving unused apps to cache memory. So, let android do its job.
Sent from Hell!!
.xxx. said:
never use a swap partition on any android phones. It does no good. The swap partition are made with your sd card which is more than 10 times slower than your internal memory. When an app is loaded or is sent to swap partition cache memory, it takes time to copy or load the files.
Android already has a system for moving unused apps to cache memory. So, let android do its job.
Sent from Hell!!
Click to expand...
Click to collapse
Well thats some info for me thanks a lot.
.xxx. said:
never use a swap partition on any android phones. It does no good. The swap partition are made with your sd card which is more than 10 times slower than your internal memory. When an app is loaded or is sent to swap partition cache memory, it takes time to copy or load the files.
Android already has a system for moving unused apps to cache memory. So, let android do its job.
Sent from Hell!!
Click to expand...
Click to collapse
This can make phone slower? Just that ?
How can i know if the swap partition is enable ?(i don't know if i have a swapt partition,i forgot that)
And if i have,all i need is to delete this ,just that ?Or i need to reinstall the rom ?
edu_stoicescu said:
This can make phone slower? Just that ?
How can i know if the swap partition is enable ?(i don't know if i have a swapt partition,i forgot that)
And if i have,all i need is to delete this ,just that ?Or i need to reinstall the rom ?
Click to expand...
Click to collapse
Just ignore his comment. We need Linux swap. Without it phone gets laggy. I tested it myself.
Download minitool partition wizard home edition. Its free Google it. After installing it and insert ur sdcard via card reader and run the program.it will show ur partitions.
You don't need to uninstall ur system. Just make nandroid backup using recovery. Re format only the ext and swap partition. Based on wat ext u had earlier. All partitions should be primary.
Then from advance recovery restore sd-ext.
Sent from my HTC Wildfire S A510e using Xparent ICS Tapatalk 2
@Edu: just search xda for details of swap partition. There have been number of discussions regarding it and all have ended up denying the use of swap partition. These have been comfirmed by much experienced devs, who have been cooking roms for more than 3 years. But still if you dont believe, i would recommend you to google a little and then make the decision.
Sent from Hell!!
.xxx. said:
@Edu: just search xda for details of swap partition. There have been number of discussions regarding it and all have ended up denying the use of swap partition. These have been comfirmed by much experienced devs, who have been cooking roms for more than 3 years. But still if you dont believe, i would recommend you to google a little and then make the decision.
Sent from Hell!!
Click to expand...
Click to collapse
But sir without it the phone gets very laggy. Means every games run slower. The antutu gpu score gets lowered.
U can easily get 645-630 3D with swap. But without it u can't cross 615. That may seem as little gain but for games it becomes a big issue.
Sent from my HTC Wildfire S A510e using Xparent ICS Tapatalk 2
Sorry couldn't upload the pics as modify isnt supporting upload of pic.
finance.resat said:
Sorry couldn't upload the pics as modify isnt supporting upload of pic.
Click to expand...
Click to collapse
Maybe that is because the extra cache memory are directly transferred to swap memory. Games which require huge cache memory can be of profit. thanks for the screens btw
@op : just take nand back up and back up your sd card. Try the swap partition thing and if it is beneficial, go ahead or else you know what to do
Sent from Hell!!
Swap Partition
Hi, i'm new here so i'ld really appreciate anyone who can really help me on this:
I created a swap partition(256mb) on my sd card for my HTC wfs. now after making series of research on swap partition, i found out that swap parttion is necessarily not needed and even if i av to use the 256mb i allocated is too much. Now i need help on how to delete the swap partition without losing my DATA ON MY SDCARD. PLEASE ANYONE WITH THE RIGHT HELP
lakesYde said:
Hi, i'm new here so i'ld really appreciate anyone who can really help me on this:
I created a swap partition(256mb) on my sd card for my HTC wfs. now after making series of research on swap partition, i found out that swap parttion is necessarily not needed and even if i av to use the 256mb i allocated is too much. Now i need help on how to delete the swap partition without losing my DATA ON MY SDCARD. PLEASE ANYONE WITH THE RIGHT HELP
Click to expand...
Click to collapse
that's kinda not possible i guess..with mini partition tool you can delete swap or ext3 partition and create ext4 visa versa..but if you wanted only fat32 it isn't possible.
either if you have ext3 or ext4..open mini partiiton tool..delete swap and delete ext3 or ext4(which one you have)
and create partition(ext3 or ext4) from remaining free space...in this your fat32 will be unchanged..
but obviously ext3/4 will be deleted..bt its okay to hv swap partition..256 MB hasn't big space..the whole concept of swap derived frm link2sd i guess..latest int2ext scripts dont need swap..but int2extv2+ need.
lakesYde said:
Hi, i'm new here so i'ld really appreciate anyone who can really help me on this:
I created a swap partition(256mb) on my sd card for my HTC wfs. now after making series of research on swap partition, i found out that swap parttion is necessarily not needed and even if i av to use the 256mb i allocated is too much. Now i need help on how to delete the swap partition without losing my DATA ON MY SDCARD. PLEASE ANYONE WITH THE RIGHT HELP
Click to expand...
Click to collapse
Copy all of your data to your pc, then format the card via clockworkmod recovery. It should remove the partition. If not you can try gparted for linux or easeus partition master for windows pal.
If your trying to keep your ext partition but without a swap then copy your data to the pc, then select partition sdcard from clockworkmod recovery. Just don't select a swap and you will be fine
Oh, and make a nandroid backup to back up whats on your ext partition
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
swap partition
crossfire77 said:
that's kinda not possible i guess..with mini partition tool you can delete swap or ext3 partition and create ext4 visa versa..but if you wanted only fat32 it isn't possible.
either if you have ext3 or ext4..open mini partiiton tool..delete swap and delete ext3 or ext4(which one you have)
and create partition(ext3 or ext4) from remaining free space...in this your fat32 will be unchanged..
but obviously ext3/4 will be deleted..bt its okay to hv swap partition..256 MB hasn't big space..the whole concept of swap derived frm link2sd i guess..latest int2ext scripts dont need swap..but int2extv2+ need.
Click to expand...
Click to collapse
thanks dude really appreciate but going by what you said i have ext3 and already used a2sd that means if i delete ext3 definately i'll lose my data. that is what i'm trying to avoid but since you said my 256mb aint much a big deal, i think i wld leave it then.
Thanks a bunch.
---------- Post added at 11:41 AM ---------- Previous post was at 11:35 AM ----------
heavy_metal_man said:
Copy all of your data to your pc, then format the card via clockworkmod recovery. It should remove the partition. If not you can try gparted for linux or easeus partition master for windows pal.
If your trying to keep your ext partition but without a swap then copy your data to the pc, then select partition sdcard from clockworkmod recovery. Just don't select a swap and you will be fine
Oh, and make a nandroid backup to back up whats on your ext partition
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
Click to expand...
Click to collapse
obviously i will lose my data......thanks anyway.
Hi, I have bought a 4gb SD Card, and made Ext partition from CWM 5.0.2.6.
Anyone can tell me what ext partition I have made: ext2/ext3/ext4? How i can upgrade to higher ext partition?
Sorry for my bad English
Thx for reply
I think you shoud use pc and partition managers to know that and upgrade.
Sent from my GT-S5660 using Tapatalk 2
I think you've made a EXT2 partition, CWM only goes up to EXT2
If you're using a Windows PC, you can download and use a tool called MiniTool® Partition Wizard (Home)
Delete the EXT2 partition on your SDCARD and make (move/resize) a new EXT4 Primary partition with a cluster size of 4KB
Hit Apply on the Top-Left corner
baterfly777 said:
I think you shoud use pc and partition managers to know that and upgrade.
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Thx
Peteragent5 said:
I think you've made a EXT2 partition, CWM only goes up to EXT2
If you're using a Windows PC, you can download and use a tool called MiniTool® Partition Wizard (Home)
Delete the EXT2 partition on your SDCARD and make (move/resize) a new EXT4 Primary partition with a cluster size of 4KB
Hit Apply on the Top-Left corner
Click to expand...
Click to collapse
Thx but I must use card reader?
multifearz261 said:
Thx but I must use card reader?
Click to expand...
Click to collapse
Yes. You must.
i have tried with MiniTool Partition but after make ext4, partition force back to ext2 and linux swap?
_______________
I tried with another SD card, after make ext partition, there no ext4 partition apear on MiniTool Partition Wizard Home Edition
Click to expand...
Click to collapse
Solved