Related
All,
I've just installed the updated ROM (test one from I-Mate) and pairing with the Parrot was as easy as before, however the big difference is....
.....Phonebook is now syncing automatically so when someone calls me in the car it now properly displays their name instead of just the number.
Cheers
D
what software version are you running on the parrot? and how long does to take to sync?? i have left mine for 30min and it still sits there syncing.
Thanks
Paul
I *THINK* it is using the latest version as of a few months ago and I dont think there's been any more versions since.
I'll try to find out when I get in the car to go home.
I dont have a huge number of contacts but it does take a few minutes for it to sync up and it seems to do this each and every time whereas my Nokia only did it whenever another device took over as the main handsfree device.
anyone disconnect the BT of qtek, with the new rom during sincronizing the contacts ?¿?
regards
Parrot 3300 sync
I have a qteck 9100 with 900 contats... up 30 minutes to complete the sync..... Too slow for me.
yes...
its so hit and miss with this new rom... i am using the orange rom at the moment, but still the same. but it has done a full sync now. just need to disable the sync so i can PUSH the contacts to it.
Paul
how can i disable the sync ?¿?
Thanks
Hi folks ...
I face this problem with the phone many times a day. I can confirm it happens each time there is a failed call attempt (you couldn't make the call) ... the only way is to switch off the phone and turn it on again.
I thought it's something with RSU 1.09.00 but it happens also after downgrading to 1.08.00 ... so I think it has to do with the new ROM. It tells the signal maybe unavailable while you can see it is on the max level.
Edit: last observation ... it can receive SMS :?:
Any one faced this experience ??
Me Too
I Have the same problem :-(
Me Too
I Have the same problem :-(
Ive noticed in your screen shot the active sync is trying to connect with the internet which will prevent you phone from making the call. To give a example .... if I was downloading a file using my universal and someone tried to call me they would get my mail instead of ringing as the phone is using the internet connection however as soon as the file downloaded the phone would break the internet connection and allow the call. Hope that made sense!
I thought the service is supposed to interrupt the download if the phone rings as the primary function of the device is a telephone and secondary as a mobile computing platform.
numanoids said:
I thought the service is supposed to interrupt the download if the phone rings as the primary function of the device is a telephone and secondary as a mobile computing platform.
Click to expand...
Click to collapse
That's what I always thought but even with my trusty old imate jam I found if I got a call as I was downloading say mail the call would not make it though, try downloading a biggish file then ring your phone number at the same time I bet it will not make it This as ALWAYS been the case btw - don't matter which rom you have. oh and this applies to gsm (2.5 gprs) only as 3G is a totally different ball game!
thx for all inputs but it happens even without activesync running ... it doesn't work again except by switching the phone off then on ... the most exciting part: u will never notice that your phone is frozen till you try to make a call :evil: ... this will make me to go back to the old rom
More observation on this issue ... I made a hard reset and started without any problems with the phone part ... I restored a system backup and all went well ... the phone issue appeared again when I paired my BT headset with the device ... this might mean something to do with the BT stack ... I believe it happens mostly during or after using the headset :?:
Any similar experiences ?
Biso007 said:
Hi folks ...
I face this problem with the phone many times a day. I can confirm it happens each time there is a failed call attempt (you couldn't make the call) ... the only way is to switch off the phone and turn it on again.
I thought it's something with RSU 1.09.00 but it happens also after downgrading to 1.08.00 ... so I think it has to do with the new ROM. It tells the signal maybe unavailable while you can see it is on the max level.
Edit: last observation ... it can receive SMS :?:
Any one faced this experience ??
Click to expand...
Click to collapse
Same Problem Here... I was going to downgrade to 1.08.00, but now I may not... Don't want to lose the speed increase, so don't want to downgrade ROM...
back again ...
I made another hard reset and staretd without any s/w installed for a week .. the phone seemed to be stable but with the same annoying BT disconnect issue ... the above issue started to appear again after installing some phone related s/w like Smart Filter and PZP ... I think the new Radio ROMs starting with 1.08 have an issue with such applications that would continously check on phone traffic or have OS hooks to catch some events ... this wasn't the case with Radio 1.02 or 1.03 ... I 'm thinking to get back to 1.03 since I got nothing from 1.08 or 1.09 except quick battery draining!!
Strange things are happening all day today, I had majik installed since friday. Today my bleutooth jsut turns of and I cant use the head-set. Then programs like messaging froze, I was able to close it, but still IE froze and stuff like that, any one else expirencing things like this ?
yozh said:
Strange things are happening all day today, I had majik installed since friday. Today my bleutooth jsut turns of and I cant use the head-set. Then programs like messaging froze, I was able to close it, but still IE froze and stuff like that, any one else expirencing things like this ?
Click to expand...
Click to collapse
Ive been SRing all day! Mines been freezing on my telenav and sirius. Just started to do this today. Has been fine since Friday as well.
Yeah, same here. I have to do a SR every time I get in my car
Looks like I'll be installing something else on it...
I have been having IE problems connecting, Bluetooth not connecting, 3G freezing. Must be a bad day for Majik.
Well well I`m not alone on this, well vp3G here I come.
I am having this problem as well, what worse is that I am away from my PC for 32 days! on business in boston and all I have is a mac, even worse is that Igo keeps losing GPS whenever it shuts off Bluetooth, isn't there a registry hack that enables power-save on BT, I think I enabled that before and had a similar problem in WM5
spiritofseth said:
I am having this problem as well, what worse is that I am away from my PC for 32 days! on business in boston and all I have is a mac, even worse is that Igo keeps losing GPS whenever it shuts off Bluetooth, isn't there a registry hack that enables power-save on BT, I think I enabled that before and had a similar problem in WM5
Click to expand...
Click to collapse
Oh man I feel for you. I`m not sure about pwersetting for b, but it would make sense to me.
Had many problems with Majik yesterday so I tried 3 other roms. Not one would give me 3G sitting here in my office as majik had done. Flashed back to Majik and is working very well. I guess vevery week reflash
People, the root of nearly 70% of problems stems from 3rd party apps and NOT the ROM......
suggest you guys test it out with no apps installed and you will see the ROM is solid.
anything with 'spb' in the title should be left at arms length.
Anything like phonealarm etc... that claim to support WM6 really are only going on beta testers...remember the releases we are using are VERY new
Had nothing spb installed. The biggest issue is the BT disconnecting all the time. And the phone frezing.
yozh said:
Had nothing spb installed. The biggest issue is the BT disconnecting all the time. And the phone frezing.
Click to expand...
Click to collapse
Like i said, Hard Reset....then dry run it and youl probably see the difference.....3rd party software which is acting up can cause allsorts of weird problems.
yozh said:
Had nothing spb installed. The biggest issue is the BT disconnecting all the time. And the phone frezing.
Click to expand...
Click to collapse
I've got 5 8525's running this Majik and only one has "freezing" issues... and he had these same issues with his Wizard. 2 POP3 email accounts being polled every 30 minutes, Exchange 2003 push and 140 plus reminders MIGHT have something to do with it <sigh>
Battery life is incredible, speed is great when one adjusts the glyphcache.
As with you, my biggest complaint is with the BT dropping the call to the device but then I can bring it back up… seems to happen mostly on my initial outgoing call….
Again, respect to the chefs, this is a bad ass ROM.
Peace, out.
Hi Guys
I have been running LVSW 20070423 since it was released. Yesterday i decided to give Majik a go. All i can say it is terribly slow. Even clean ROM without applicvations. Could only stand it for 30min and then i reflashed LVSW back. The other thing is default coulors, i could hardly see my screen when outside. Dialer is crap, i like native WM6 dialer when you can type a few letters and then hide the dialpad. In Majik there are 4 lines only and if you have a lot of contacts it is a real pain to scroll through.
No good for me at all.
Will stick with LVSW ROM until the official release.
I have installed, Sirius, Voice Commander, Adobe, Live Search, WLM 1400, and esmertec. I tweaked the performance myself and set up mms and MEdia net and ISP/WAP settings myself. After I reinstalled Majik I have had no problems. I think that those problems came from WLM and IE because of the IPhone owners taking up my bandwidth
Note....Everybody that had problems was the same day they released the IPhone and we are all on AT&T
Check it out
http://www.theregister.co.uk/2007/07/03/stingy_att_iphone_network_snafu/
Second Flash
I think I had a bad flash the first time around.
I reflashed yesterday and the speed problems have dissapeared.
I was waiting +/- 20 seconds for /windows to open using file explorer.
That's all gone now and the ROM is pretty nippy and stable so far for my application.
But I do feel that all the extras trying to mimic the "Touch" ROM will have an effect on the speed and maybe stability.
That's why is still flash a different ROM every week or so.
To date Sleuth seems to have the combo nearly right.
LVSW cooked up fantastic ROM's, but he seems to be playing with his ELF now. - a bummer for us Hermes users.
Majick slowishness
I've found that installing the video dialler (3 cab files) dramatically slows down the Majick rom. I thought I was imagining things so I hard reset and repeated the excersise a couple of times with the same effect.
I leave the video dialler off now. I can't think of a time that I've ever used it although I do obsess about having a feature on my phone that I can't use even though I never use it.
Although Majick is an excellent ROM I did find the current LSVW was a bit quicker. The HSDPA problem in this ROM meant that it was a no-goer for me though.
I'm not complaining you understand, I'm very grateful for all the work people have done to get me WM6 on my phone!
only problem i have with majic so far is that when I add the new internet 3G connection, my username and password never seems to get saved no matter after how long. i have tried to both soft reset and power off, but still the 3G username/password never gets saved. anyone have any ideas on this?
All,
I've just upgraded from WM5 to WM6 with HTC Home RevROM, which is excellent, however, I have this strange issue.
First, I paired my laptop through Internet Sharing over a Bluetooth PAN - works perfectly.
Second, I paired my Jabra BT2020 earpiece.
As soon as the Jabra was paired, the list of devices under Settings->Bluetooth->Devices was empty. Not even the words "Add new device" is present........
I have checked, and I can still continue to use my laptop through Internet Sharing, and I can also use my Jabra earpiece to take phone calls.
Switching the phone off/on and Soft Resets do not solve this problem. Only a hard reset will solve it - but then of course I have to re-enter everything - which I have done, only to have the problem re-occur, hence it is repeatable.
Has anyone else seen this issue and could help me with a solution. I have searched the forum (and Google) to no avail.
Many thanks,
BrianP6
BrianP6 said:
All,
I've just upgraded from WM5 to WM6 with HTC Home RevROM, which is excellent, however, I have this strange issue.
First, I paired my laptop through Internet Sharing over a Bluetooth PAN - works perfectly.
Second, I paired my Jabra BT2020 earpiece.
As soon as the Jabra was paired, the list of devices under Settings->Bluetooth->Devices was empty. Not even the words "Add new device" is present........
I have checked, and I can still continue to use my laptop through Internet Sharing, and I can also use my Jabra earpiece to take phone calls.
Switching the phone off/on and Soft Resets do not solve this problem. Only a hard reset will solve it - but then of course I have to re-enter everything - which I have done, only to have the problem re-occur, hence it is repeatable.
Has anyone else seen this issue and could help me with a solution. I have searched the forum (and Google) to no avail.
Many thanks,
BrianP6
Click to expand...
Click to collapse
Hey man, Unfortunatly this is a bug with my current kitchen, I believe he is using parts of it for making roms. I'm working to fix it soon in my kitchens.
Peace,
Josh
Thanks for the quick reply Josh,
Do you have any ideas at the moment as to the cause? Is it the number of connections, type of connections....... so that I can avoid the bug cropping up.
Also is there a workaround that you're aware of....
oh, and nice work chef
Cheers,
Bri.
BrianP6 said:
Thanks for the quick reply Josh,
Do you have any ideas at the moment as to the cause? Is it the number of connections, type of connections....... so that I can avoid the bug cropping up.
Also is there a workaround that you're aware of....
oh, and nice work chef
Cheers,
Bri.
Click to expand...
Click to collapse
This bug appears only when 2 or more devices get paired.
I've been trying everything, even abusalza himself suggested some module replacement. i'm working on replacing drivers and certain folders in sys in my kitchen but still nothing yet... so far not yet, but it's fixable, i just gotta figure it out.
Thanks Josh,
I guess you'd know this anyway, but for completeness and for the benefit of the whole forum.........
Even though the paired devices are no longer shown in the Bluetooth Devices window, and you can no-longer use your HTC to pair more devices, then so long as you carefully initiate the pairing from the other device, it will be recognised, PINs will be requested and devices configured appropriately. I have just done:
Audi A4 in car kit
Laptop via Internet sharing
Jabra earpiece
None appear on the Devices window, but all (so far) appear to work perfectly.
Cheers,
Brian.
I have had a similar nagging problem with my Motorola S9 and Hermes 100/Cingular 8525. After a new flash, I can pair the headset and the phone relatively easily. During first pairing, I am *not* prompted for the headset's PIN. Over time, switching between phone and music functions becomes more unreliable. Icons disappear while the headset is in use. Discontinuing a call with the headset results in audio resuming through the external speaker instead of the headset, etc.
Eventually, out of the blue, the headset will fail to pair; and I will receive a prompt to enter the PIN number for the headset. I enter the PIN and the phone refuses to accept that it's the correct PIN. From that point on, I'm screwed until I reflash the phone. It never works properly anymore.
This has happened across multiple ROMS, including some of Josh's that I've tried. It happened again the day before yesterday with one of TAI_Sw's ROMS I'm currently using. In this case the profile in Bluetooth settings appeared to be corrupted. The profile no longer read "Motorola S9". Instead it showed a series of block characters (like unsupported fonts). I was able to delete the profile, and, after multiple resets (hard and soft) the phone finally redetected the headset and we went through the configuration wizard again. It's been mostly working well since then.
Has this happened to anyone else?
austinsmartie said:
Has this happened to anyone else?
Click to expand...
Click to collapse
Yep, I have experienced everything you mentioned at one time or another, even the square characters showing up in the device list.
I have gone all the way back to test Faria R32 ROM. It's amongst the best I've found for A2DP with the S9's along with some of PDACorners early ROM's. The drawback are that it doesn't have the 1% battery increase .dll cooked in and also still exhibits the "numbers for character during a call" bug.
It does have nearly 31 MB of memory free after fresh install though. (using 4MB pagepool - default is 6MB)
austinsmartie said:
I have had a similar nagging problem with my Motorola S9 and Hermes 100/Cingular 8525. After a new flash, I can pair the headset and the phone relatively easily. During first pairing, I am *not* prompted for the headset's PIN. Over time, switching between phone and music functions becomes more unreliable. Icons disappear while the headset is in use. Discontinuing a call with the headset results in audio resuming through the external speaker instead of the headset, etc.
Eventually, out of the blue, the headset will fail to pair; and I will receive a prompt to enter the PIN number for the headset. I enter the PIN and the phone refuses to accept that it's the correct PIN. From that point on, I'm screwed until I reflash the phone. It never works properly anymore.
This has happened across multiple ROMS, including some of Josh's that I've tried. It happened again the day before yesterday with one of TAI_Sw's ROMS I'm currently using. In this case the profile in Bluetooth settings appeared to be corrupted. The profile no longer read "Motorola S9". Instead it showed a series of block characters (like unsupported fonts). I was able to delete the profile, and, after multiple resets (hard and soft) the phone finally redetected the headset and we went through the configuration wizard again. It's been mostly working well since then.
Has this happened to anyone else?
Click to expand...
Click to collapse
It frustrated me enough that I started building my own rom!
I released one version here that I have been running for quite some time with no issues in the bluetooth at all.
I need to tweak it a bit more to make it "polished" but it is very useable and stable. I just wanted to run it for a while to see how it is going to act over a longer duration before I continue to fool with it, and I have been rather busy here lately.
Well, if you have a magic potion, please share with the community. And, by the way, this is the only device I pair to my Hermes; so this may be different from the problem Josh and others have described.
joshkoss said:
Hey man, Unfortunatly this is a bug with my current kitchen, I believe he is using parts of it for making roms. I'm working to fix it soon in my kitchens.
Peace,
Josh
Click to expand...
Click to collapse
i just installed your new v15 color(thanks very much for that release it looks great) and i definitely want to pair 2 devices with the phone. this has worked for me in whichever random wm6 rom i found on the web last year and i have been trying to find the right rom for me this week so my question: is this a random bug, is there a trick to doing it right or am i just plain sol?
Hmmm - doesn't happen on my ROMs...
The suspect things I'd be looking at in SYS are:
Bluetooth
Bth_A2DP
Bth_HID
Try replacing those folders with known good ones and see if the problem still happens...
austinsmartie said:
Well, if you have a magic potion, please share with the community. And, by the way, this is the only device I pair to my Hermes; so this may be different from the problem Josh and others have described.
Click to expand...
Click to collapse
No Magic potion! lol
I basically did what CRCinAU described. (His rom doesn't have the issue, and feels a bit faster than mine. But, I was looking to create "My perfect rom").
But I also replaced files in the redist folder with "bt" in their name, with files from a known working rom (anryl's 20755). Like I said I wanted to run the rom for a while, now I just need to go back and tweak and clean up some things in the rom before I make another release.
summary
stickybud said:
i just installed your new v15 color(thanks very much for that release it looks great) and i definitely want to pair 2 devices with the phone. this has worked for me in whichever random wm6 rom i found on the web last year and i have been trying to find the right rom for me this week so my question: is this a random bug, is there a trick to doing it right or am i just plain sol?
Click to expand...
Click to collapse
it is a really odd issue and seems to only affect the hermes... Here is the deal, Some chefs when porting sys grab the cplmain.dll to get the build number and keep some other items in their kitchen sys for stability purposes... I have noticed in my experience when porting, if the cplmain.dll does not match some other components with the same build number it will cause this issue. usually resist, shell, os, folders have been containing these sensitive items. so in short, if the issue is occuring cplmain.dll in redist folder does not match other components in your sys causign the conflict.
edit, and oh. i've tried replacing all bluetooth which had no effect.
So to fix this, the chef needs to report sys correctly and recook the rom.
Hello everyone,
I'm having a problem with the RCD 510 Premium Bluetooth kit that is installed on the new VW Scirocco and its been troubling me for over 2 months now.
When I first got my Scirocco the Bluetooth connection was working fine (for 3-4 months). One day out of a sudden the Touch Pro II was not pairing anymore with the car's bluetooth kit.
At the time I was using Windows Mobile 6.1 that originally came along with the phone. I tried the basics - deleting the connection, re-pairing - with no success.
So I gave a shot at phone's factory reset - still no luck. The phone is recognized when I use the "Device Search" function on the car, it prompts me to enter the pass code provided, I do so, the phone loses the GSM signal (which of course is normal) but then suddenly I get a message on the RCD510's main screen "No bluetooth connection to phone" that lasts for about 2 seconds.
Since the problem began, I tried factory reset the phone (as I mentioned before), and tried pairing before installing even a single software, still no luck.
I tried multiple ROM's in the meanwhile (I mean third-party ROMs from this forum) and now I am using the official Windows Mobile 6.5 from HTC for my phone.
I also did many tests using third-party applications for the rSAP protocol (JetWare hands-free extension, SAPSettings, some patches and drivers found around the net here and there) even though there is native support for rSAP since the first firmware that came along with the device.
As I mentioned before, the phone was pairing fine the first 3-4 months.
Please note that this phone uses the Widcomm Bluetooth Stack - not the Microsoft one.
Any help/ideas would be greatly appreciated.
PS: I apologize for the big length of the post, but I believe the more the information I provide, the more the chances to get proper help
Sorry i cant help you but.. I want your CAR...
Any pics?
Well.. try this
Unhook the cars battery. Let it reset the radio (make sure you have the radio code if any) and try again.. maybe the radio is holding some sort of setting. Resetting to default (like with the device) might do the trick..
.
Thanks for the idea. I'm kind of worried though plugging out the battery, because there are many settings besides the radio that probably will be lost if I do so.
You know all these new cars and their complicated electronic sensors...I don't mind losing minor settings for the car that I have adjusted, my main concern is that if anything goes wrong, I will probably have issues with the car's warranty. I still have 2 and a half years of warranty.
I' will probably have a talk with the dealership before doing that.
Many thanks for your thought though
hi i like to know if pairing went okay with the 6.1 rom because if so maybe when you switch back to this rom problems are solved
Nop
Unfortunately no
It was one of the first things I tried. Switching back to the official 6.1 ROM. I actually kept it saved on my hard disk and I tried it a couple of times - I mean when I tried other ROMs from time to time - hoping it would resolve the issue.
And that's the strange of this case. I mean, it was working (pairing) fine the first couple 3-4 months when I unboxed the phone, and then out of a sudden, no pairing.
First logical thought would be that something has changed in the car's settings. But I have an Athena X7500 that pairs fine with the car up to this day. My car's dealership isn't much of a help...
Second thought - phone settings mess-up. But as stated in my original post, no factory reset helped, no switching to other ROMs, no playing around with settings.....
I'm really desperate. I'm thinking to switch to another phone, but besides this problem I'm quite satisfied with the TP2. And I do "need" Windows Mobile based phones, because I sync with Thunderbird's Lightning via BirdieSync for a long time now, and I am not willing to revert back to the horror days of MS Outlook. I carry my TB profile for over 2 years now and its customized the way it suits me for manipulating my 10+ email accounts.
Thank you very much for your reply though
Any other thoughts/recommendations?
i downloaded firmware 1.20 from volkswagen hope this will help me will try tomorrow with my laptop i am with a touch adapter connected to rns 510 no pairing with tp 2 at the moment for me the only workable solution is a duo sim with my old blackberry bold meanwhile i love he TP2 so hope i can get it to pair with my premium touch adapter volkswagen carkit any other suggestion or solutions are very welcome cheers
And that's the strange of this case. I mean, it was working (pairing) fine the first couple 3-4 months when I unboxed the phone, and then out of a sudden, no pairing.
what radio where you on first couple of months
Nice thought about the radio....but unfortunately I don't remember.
Currently I am using v4.49.25.17 that was upgraded with the latest official HTC firmware of WinMo 6.5 if I am not mistaken.
I am 90% positive though that the problem started before even upgrading, back when I was using the first release of WinMo 6.1 and the unknown version of radio, and everything was working ok at the beginning.
I know, I am not helpful at all but frankly, this problem surprises me as much as you.
You mentioned a firmware upgrade - for the RNS right? Not the RCD....
Do you by any chance happen to know if there is a firmware upgrade for the RCD510 and where can I get it from?
Thanks for your help.
looking-g:
I just realized that you are having a problem with the RNS.
Did you had this all along? I mean, did you ever managed to get it working and then it stopped, or you never had it paired?
I am just asking to see if I can be of any help...
well the problem is not with the rns 510 but with the touch adapter which come delivered as premium carkit i use to pair everything with it blackberry,s nokia,s and also a touch dual (niki) without any problem but now with my new phone the tp2 its not pairing it also never did after i fill in the pincode it gives an error message it should connect with the touch adapter my car by the way is a golf gti mk6 cheers, mark
You kind of lost me there.
What do you mean "touch adapter"? Is this a component of the RNS 510? Because I have never heard of it...
Have you determined a solution?
I just picked up a new VW Jetta with premium bluetooth and it worked the first time and not since.....
You guys are scaring me -- I have an Audi A3 TDI scheduled for delivery in January, and it'd be a bummer if its Bluetooth didn't work. FWIW, my current car has a Sony MEX-BT3700U headunit and the Tilt 2 pairs with it in both handsfree & A2DP modes.
3waygeek: You will be probably fine. I think Audi does not have anything to do with Nokia regarding building their units.
Wish you best luck with that.
Extra info
Some more information regarding the whole subject:
I found out that when I press the "Emergency Call" option on the touch screen of the RCD510 (i.e. try to call the international emergency number - 112) and then immediately end that emergency call, the next time I try to pair the Touch Pro 2, it does pair!!! But it has no signal at all, and if you try to make a call you get a "Dial up error" (or something like that, can't remember exactly)!
Any ideas what could be the reason for that?
Thanks.
Your problem is common to VW/Audi's. Chances are the car kits have the rSAP Bluetooth unit. I had exactly the same issue in my A6 using rSAP, as soon as i upgraded to wm 6.5 the problem went away.
Yes, indeed the car kit uses the rSAP profile, as well as the Phonebook Access Protocol (PBAP), but both of these protocols are supported by the TP2. Actually the rSAP functionality I believe is support in Windows Mobile 6.1 and above - I mean besides the fact that your phone's BT radio must support it in order to work correctly. (Without being entirely sure for the above comment).
And some more info for those who are willing to give an opinion:
I did eventually decided to remove the car's battery. I left the car without battery for approximately 40 minutes. Now here's the strange part: All the settings of the card indeed reset (window settings, light settings, etc) BUT the RCD510 was not affected at all by the battery removal! Yes, as weird as it might sound, the station list was there, bass/tremble customizations were there also, everything in place (regarding the radio unit always).
Side note for all those who might remove the battery from a similar VW car:
As soon as I plugged the battery back on, I had somewhere 15+ warning indicators on my dashboard turned on. From ABS malfunctions, air pressure, EPS malfunctions etc. But after rolling the car for 3m or so everything turned off. Back to normal. Probably had something to do with the electronic sensors giving proper signal to the car's "brain". Just my opinion.
Now, besides that - the fact that removing the battery didn't perform a reset of the radio (RCD510) unit, I also tried reverting my Touch Pro II to a WM 6.1 cooked ROM - don't remember which one exactly - but that didn't helped either. Same stupid error message after pairing for 2 secs: "No bluetooth connection to mobile phone".
And to confirm again: My X7500 (Athena) with a cooked WM6.1 ROM from michy still pairs and works fine. (Tested it last night, just to make sure that battery removal didn't had any side-effects)
PLEASE help me if you can. Any suggestion/recommendation will be greatly appreciated.
PS: I decided to contact the car's dealership to inform them about the whole problem. I will post soon regarding how that went...
Thanks for your time everyone...
By the way, does anyone knows the proper way to reset the RCD 510 to it's factory default settings? Besides the function that is given inside the menu itself - I already tried that. I was just wondering if there was a "hidden" way that will entirely wipe all settings/customizations from the unit....
Hi guys! I m in the same situation: Sirocco + TP2 with 6.5 from Orange. Any progress from your side? Ideas would be greatly appreciated!! Cheers, P
Unfortunately!
No friend, sorry. No news yet.
I do keep the post open hoping that someone will give me a new year's present
It's nice to know that I am not alone though