Related
Ok, I am getting increasingly frustrated trying to resolve an issue... my Xda O2 IIs keeps "waking itself up" ....aaaargh!!!
I hit the power button on the top to shut off the display (it saves power and enables me to lock the other keys from being accidentally pushed) but after a very short time, the screen comes on by itself, and I can't figure out WHY!!!!
While just sitting on my desk or out on the road, not in the cradle, I noticed, from time-to-time, that the "G" Icon at the top is often replaced by an "x" and the 'left/right sync arrows' ...so I naturally thought it was trying to connect to something.
I thought it might be trying to connect to GPRS, so I removed the connection. It didn't fix the issue.
I thought it was a Bluetooth File Transfer issue, so I deleted that connection also... still no resolve.
I checked my ActiveSync settings, and it all looks ok.
PLEASE HELP, it's killing the length of life in my battery on a daily basis!!!
i had the same problem when i was on the o2 rom, i sorted it by getting shut of the o2 rom and installing the imate 1.40 rom.... it runs faster,better and never needs soft reseting, with the added bonus of wm10.
but i kinda came to the conclusion that when the fone itself talks to the network every so often, ( ya know when u get interferance when its next to a radio or ur desktop speakers.) as it did it at those times, maybe u should stick it next to something and see if u get the radio interference, and see if it does this in flight mode......
also maybe think about removing the o2 active if u have that, and as a last resort, if no-one else can halp with a fix, maybe think about upgrading to imate 1.40 rom...
Mine did this for a while. I can't remamber the EXACT setting, but it was activesync trying to sync on a schedule (like every 5 minutes) over WAP.
If its the same problem, a bit of rummaging around the activesync settings should sort it out.
-Mike
Thanks joey jojo. Thanks mike freegan.
Joey, where can I get iMate 1.40 ??? Although, I really don't want to use the iMate rom. Ideally, I'd like to find and fix the problem I'm having with this O2 rom.
Mike, I checked my ActiveSync settings on the device... everything looks ok to me. Under ActiveSync/Tools/Options/PC Synchronization: 'Use this PC' is set to ZEUS (which is my computer name) and the other two boxes are UNchecked for 'Use mobile schedule to sync with this PC' and 'Sync with this PC during manual sync' ...then when I click on the Options button, the 'When cradled' dialogue appears, the checkbox for 'Enable PC sync using this connection:' is CHECKED and the connection to use is set for 'USB' . Then, under the 'Mobile Schedule' tab, everything is set to 'Manually'.
BTW, when I put the device in 'Flight Mode' ...it doesn't mysteriously 'wake-up' by itself.
I agree, it appears to be trying to use GPRS to 'connect' or 'sync' with something... I just can't seem to find what or where the cause is located. Aaaargh!!! Any other ideas guys?? Anyone else?
XDA III IIs IIi Waking UP
I've found that if I leave my bluetooth switched on it does this I'd love to have my bluetooth on all the time but as it does this I have it off unless I'm using my GPS.
Can this be fixed ?
Thanks Carl n Adele,
I tried your suggestion, shutting off BlueTooth, but after doing so, and then pressing the power button, the device STILL wakes-up after about 20-30 seconds. So, that wasn't the problem.
Is there any O2 subscribers that can call O2 Tech Support and ask some questions? I'd even call myself if I could pretend to be someone else. Just a thought, if there was anyone willing to help out.
i will try to get u xda support number, i work at o2 so i might be able to ask someone too... tho i guess they wont know, cos there idiots.... lol
I had this problem too. Found that Activesync was still running in the background and was using "mobile schedule" to sync via GPRS (even when set to manual), check that ActiveSync does not appear in the Running program list...
Thanks joey jojo, I really would appreciate the help!
m4ttyw, you are correct, ActiveSync was running in the background. But I had set everything in ActiveSync to MANUALLY SYNC. Nevertheless, I STOPPED ActiveSync in the Running Programs List, then pressed the Power Button again, and with fingers crossed and holding my breath, I waited to see if the device would 'wake itself up' again... and... sure enough, it did. Same thing as always! DAMN! Nice try though, thanks.
This is really frustrating me. The manual shows NOTHING about that Icon at the top if the screen (see earlier message in this thread) and what it is doing, so I can only think that is is still trying to connect or sync something... AAAAAAAARGH!!!!!!
Hmmmm, I wonder if it might have something to do with the GSM Band setting? It's currently set to Automatic, I am not sure what it SHOULD be set to for Rogers in Canada???
Darn think waking up
checked all my settings and its def the bluetooth causing my problems
Not mine, Carl... I have BlueTooth SHUT OFF and the device still wakes up by itself!!!
NEW Observation: When the device wakes-up, it takes about 5 seconds before the "G" icon changes to the 'sync' icon with the 'x' (see pics earlier in this message thread) but, I've noticed that signal strength drops off to nothing except a few dots "..." as if it were searching for a signal. And then, immediately comes back to normal signal strength.
sol
This is sometimes caused by a conflict between ur current radio stack and the frequency ur network is using.
What i mean is, the 'G' icons only represents the availability of gprs in ur current coverage area.By default, ur phone syncs with ur provider every x interval
in seconds, by which the state of gprs availability is changed (Hence,its icon) in ur case, ur pda wakes up whenever ur pda syncs with ur network. A temporary solution would be to choose a network configuration (under settings - connections) which doesnt have a gprs connection. This might, or might not cure it. The best thing to do in my opinion is to change ur current Rom ( or atleast ur radio Rom) that would definately cure the problem.
Try both solutions and post.
Sorry for my worse english.
I met this problem for several times, and it seem to cause by active sync inside the PPC.
I have to connect it to PC and have a Sync Operation,then solve it .
My Device :
Simpified Chinese Dopod 696
The Version Number is fogotten Because I had upgraded it .
Thanks gz_lgz,
I think you are CORRECT!!!! I started to think about what you said in your message, and decided to INSTALL the NEW VERSION of ActveSync 4 on my desktop pc.
After installing ActiveSync 4, I did a sync, removed device from cradle, pressed the power button on the device and waited... and waited... and waited... and waited... and waited... and waited... AND it did NOT WAKE ITSELF UP!!!
It seems there was something happening with the ActiveSync installed on the device that was not working properly and therefore kept trying to sync itself again & again, but since installing the new version of ActiveSync, it corrected the problem.
NOTE: I suppose that uninstalling and reinstalling the OLD version of ActiveSync may have done the same thing... but I never tried to do that.
Nevertheless, I am very happy that it is working properly now!!!
Thanks EVERYONE for your time and patience and WILLINGNESS to help!
Gentlemen,
After upgrading to the latest Dangaard ROM I've got a problem that seems to have the same root cause although the symptoms are slightly different.
If Bluetooth is switched on and my hands-free Logitech is paired with the Blueangel, it wakes up every minute. Once the hands-free is switched off, the device sleeps normally. Another lame thing is if the phone call is long enough for the device to go to the sleep mode (longer then 1 minute in my case), the Bluetooth connection is dropped and the sound is transferred to internal speaker.
There is no need to mention that Activesync is stopped. I'm quite sure that all these problems have something to do with the power management of the device. That's why I'd like to ask if somebody uses any additional software for the power management and if you've got any recommendation on the subject.
Hope it could help us to get rid of the problem. Any help is greatly appreciated. My device details are mentioned in the signature.
PS. Thanks to all the contributors to this wonderful forum. I must admit that the idea of BlueAngel was as great as the implementation sucks...
Update: Check this out: http://forum.xda-developers.com/viewtopic.php?t=21235
I think this workaround is good enough.
just a thought, but open active sync on your xda, and make sure that on the PC tab, the box marked 'use mobile schedule to sync with this pc' is not ticked and the other marked 'sync with this pc durin manual sync' IS ticked
also on mobile schedule tab, all selections are set to manually, and the box marked 'sync outgoing items as they are sent' is not ticked.
dunno if that will help, but its a thought anyway!!!
joey 8)
Guinness said:
Thanks gz_lgz,
I think you are CORRECT!!!! I started to think about what you said in your message, and decided to INSTALL the NEW VERSION of ActveSync 4 on my desktop pc.
After installing ActiveSync 4, I did a sync, removed device from cradle, pressed the power button on the device and waited... and waited... and waited... and waited... and waited... and waited... AND it did NOT WAKE ITSELF UP!!!
It seems there was something happening with the ActiveSync installed on the device that was not working properly and therefore kept trying to sync itself again & again, but since installing the new version of ActiveSync, it corrected the problem.
NOTE: I suppose that uninstalling and reinstalling the OLD version of ActiveSync may have done the same thing... but I never tried to do that.
Nevertheless, I am very happy that it is working properly now!!!
Thanks EVERYONE for your time and patience and WILLINGNESS to help!
Click to expand...
Click to collapse
ah, i didnt read that before my last post, ok, glad to hear you sorted your problem out tho!!!
joey 8)
i get the same problem with mine - ever since i turned my active sync onto manual it started with the problem so i turned it back to automatic.. just seeing if that fixed the problem i've been having..
also Downloading the lastet Active sync 3.8 and see if that helps..
I've figured out that its Sprite Backup Software v3.0 thats causing my XDAIIs switch on all the time. Disabling the Scheduled Backup seems to resolve the problem.
However, I've upgraded to SBSv3.14 which works even without turning off Scheduled backup.
Hope this helps
Sorry if this has been covered before, I've been searching the threads for quite a while though only came up with those having problems with standby freezing.
So I have a 838pro, running Elf 2.1 - Clean! -- Connected to exchange 2007 (push) 3g/HSDPA. This works great -- except I cannot go far from a charger since my pda will not enter standby mode.....(unless i hit the power button - this works fine, and so does resuming) -- Every thing is great except it drains the battery like no tomorrow.
Not running wifi or bluetooth. 3 Network in Australia.
If I kill the activesync service it will standby as set by my power settings (1min power/30sec screen)
Would my exchange server be playing funny buggers?
I've tried a couple of different roms (black etc) and all seem to have a similar problem.
Running 1.41xxx radio / hard spl v7;
Any ideas?
Cheers.
Since yesterday, I've down graded to my Networks current rom (which is 1.30 vm5) and standby works fine.
Tonight I will re-flash to a wm6 rom and see if it helps (e.g. not changing the radio rom back to 1.41)
The rom I got is specifily for my network so call quality is actually better than 1.41 - with regards to range/data -- too early to tell.
Cheers'
Snoops said:
Since yesterday, I've down graded to my Networks current rom (which is 1.30 vm5) and standby works fine.
Tonight I will re-flash to a wm6 rom and see if it helps (e.g. not changing the radio rom back to 1.41)
The rom I got is specifily for my network so call quality is actually better than 1.41 - with regards to range/data -- too early to tell.
Cheers'
Click to expand...
Click to collapse
My phone has never gone into standy while using Push from the exchange server. Once I make it sync every 15 minutes it seems to be able to turn the screen off.
Rob
Well about half way thru today it started doing the not sleeping thing. So tonight I re-installed elf and tried using push with an exchange 2003 server (I am not sure of services packs etc, as the exchange 03 server isnt hosted locally).
So now it has been running for about 4 hours without any problems. It must be a exchange 2007 thing.. Maybe the keep alive packet??
Any Ideas?
same issue here
I noticed since I set up DeniaL's Exchange 2007 service, my battery life went into the toilet. My bro in law was comparing phones (he has a Hermes too) and asked why mine never went into standby... Battery problem discovered... Ideas anyone?
Does Denials owa access use http or https?
(e.g. when you setup your exchange server do you leave the ssl option ticked?)
After having a little time to play around.. I think (might) of found the issue.. Syncing over a http connection seems to be the problem for me. Switching to ssl seems to fix the issue... -- Will update in a two or two after more testing
i am a newbie of Vodafone (PH20B2),
Device Version is
Rom Version : 1.31.00 WWE
Rom Date 12/13/04
Radio Version : 1337.42
Extrom Version : 1.31.175 WWE
with Windows mobile 2003 Second Edition
the problem is that sometime i could not receive the call , the message occurs "unable to answer the call".
When i try to tab phone icon the message " The phone is not ready wait 15 seconds and try again" occurs .
anybody could help me what to do.
I am getting the same problem why is this?
I have a o2 xda IIs, i have installed WM6 Pro CE OS 5.2.1933 (Build 18533.0.7.0) Updated [30.11.2007]
i face the same problem, furthermore i realize when the battery is near 30% da phone becomes buggy in the sense dat messages stop getting sent and after soft resets da trouble is the network stops getting detected only after 5 minutes i see network signals,as soon as i hookup the phone with power the sms problem is immediately solved!
It may be helpful to note i have not installed any third party software and the phone has been hard reset only a few days ago!
Does the parite virus affect the phone? i installed parite infected .exe software through AS 4.5 and as a precaution hard resetted the phone following that!!
furthermore tapping answer doesnt work and the call automatically gets disconnected!!!
Try Upadating your ROM to Xplode's one. And yes one important thing , always keep your bluetooth on ( you may uncheck the beam option). This may solve your problem.
basharatwant said:
Try Upadating your ROM to Xplode's one. And yes one important thing , always keep your bluetooth on ( you may uncheck the beam option). This may solve your problem.
Click to expand...
Click to collapse
NO dont do that. it will drain your battery faster if bluetooth is on.
make sure it is OFF and also check the infrared (Beam).
You're battery might be failing to power up the phone module.
Try a new battery.
I've experienced some used battery.
Below 30% is very critical for ALL PocketPC operations, this is the point where some glitch tends to pop-up because the battery cant support
the power requirement of the hardware in which the software was using
(Ex. Phone, Camera, LCD, Speaker, Mic, Digitizer) thus, it fails bigtime or sometimes crashes.
Except if your battery is newer where the 30% which steadily and accurately give power to our BA.
And make sure you terminate all your programs if you've finished using it, if it is running it might affect the power consumption because it is still present in the memory.
anyone can sync without using original cradle or bluetooth? i m having problems with non-ori cables..on usb port.. help pls!!!
plusdesign_np said:
i am a newbie of Vodafone (PH20B2),
Device Version is
Rom Version : 1.31.00 WWE
Rom Date 12/13/04
Radio Version : 1337.42
Extrom Version : 1.31.175 WWE
with Windows mobile 2003 Second Edition
the problem is that sometime i could not receive the call , the message occurs "unable to answer the call".
When i try to tab phone icon the message " The phone is not ready wait 15 seconds and try again" occurs .
anybody could help me what to do.
Click to expand...
Click to collapse
Does this happens right after powering on ?
It is normal to take a long time to boot up the SIM Cards configuration and specially SIM contacts onto the phone's memory.
JP
OMG i realize after 35% my phone starts getting buggy, messages dont get sent :s phone hangs and has to be reset :O...can anyone tell me if a new battery for a blue angel is a good idea? and furthermore I am willing to invest in a new battery can anyone send me links for a cheap O2 XDA IIS battery which will last rigorous use? can anyone verify stability issues after 30%?
The phone is not ready. Wait 15 secondsd and try again. !!!
And can't open Options for the phone and not able to send SMS.
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
Radio 1.12
Trying reflashing and also with another PV WM6 2000 and trying to send SMS immidiately after reflashing but no luck! Though it worked in the first days of switching to WM6.
Could it be the Radio 1.12 version problem?
Thanks for helping!
Ok see if you SIM is perfectly making contact. I had the same problem. I did put some bit of paper on the over the SIM . So that after closing the back cover it fitted snuglly to its slot.
basharatwant said:
Ok see if you SIM is perfectly making contact. I had the same problem. I did put some bit of paper on the over the SIM . So that after closing the back cover it fitted snuglly to its slot.
Click to expand...
Click to collapse
I can receive SMS but not send them out!
And the phone is working though the Phone Options says the same thing about waitinf for 15 seconds and cannot be opened at all!
Thanks for your kind reply.
surely the battery keep it powered by da charger and den try
or try a new battery like i said in the 5th post of this thread.
SilverSamurai said:
or try a new battery like i said in the 5th post of this thread.
Click to expand...
Click to collapse
I did charge the battery and while in the cradle the phone Options and sending out SMS says the same thing about waiting for 15 seconds.
But the phone itself works with incoming and outgoing calls and I can receive the SMS !!!
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
Radio 1.12
Could it be the Radio 1.12 version problem?
Thanks for helping!
try to upgrade your radio. i have 1.15. then let us see what happens.
SilverSamurai said:
try to upgrade your radio. i have 1.15. then let us see what happens.
Click to expand...
Click to collapse
Which upgrading method of the 2 that are described in the XDA Wiki?
Last time I tried both it seems it didn't work for me.
One says that is just Radio updating and the other the whole WM operating system?
Kind Regards
www.myspace.cn/taijiyoga
Just try the radio updating only. The one in the wiki is good.
or copy the radio.nbf to where nk.nbf is. then flash both only if you want.
if you just want the radio. delete the nk.nbf.
then launch MAUpgradeUT_NoID.exe
I had a very same problem.
The problem was solved by buying a new battery.
At least for me, the only problem was the battery. Now everything is going fine...
Yup. Mostly, but not all, problems are battery related. our BA's really a powermonger when it comes to eating battery mAh
so the most common advice for a hardware failure or such is a change of battery.
note: even our desktop PC's malfunction if it is running undervolt.
Hello everyone,
I'm having a problem with the RCD 510 Premium Bluetooth kit that is installed on the new VW Scirocco and its been troubling me for over 2 months now.
When I first got my Scirocco the Bluetooth connection was working fine (for 3-4 months). One day out of a sudden the Touch Pro II was not pairing anymore with the car's bluetooth kit.
At the time I was using Windows Mobile 6.1 that originally came along with the phone. I tried the basics - deleting the connection, re-pairing - with no success.
So I gave a shot at phone's factory reset - still no luck. The phone is recognized when I use the "Device Search" function on the car, it prompts me to enter the pass code provided, I do so, the phone loses the GSM signal (which of course is normal) but then suddenly I get a message on the RCD510's main screen "No bluetooth connection to phone" that lasts for about 2 seconds.
Since the problem began, I tried factory reset the phone (as I mentioned before), and tried pairing before installing even a single software, still no luck.
I tried multiple ROM's in the meanwhile (I mean third-party ROMs from this forum) and now I am using the official Windows Mobile 6.5 from HTC for my phone.
I also did many tests using third-party applications for the rSAP protocol (JetWare hands-free extension, SAPSettings, some patches and drivers found around the net here and there) even though there is native support for rSAP since the first firmware that came along with the device.
As I mentioned before, the phone was pairing fine the first 3-4 months.
Please note that this phone uses the Widcomm Bluetooth Stack - not the Microsoft one.
Any help/ideas would be greatly appreciated.
PS: I apologize for the big length of the post, but I believe the more the information I provide, the more the chances to get proper help
Sorry i cant help you but.. I want your CAR...
Any pics?
Well.. try this
Unhook the cars battery. Let it reset the radio (make sure you have the radio code if any) and try again.. maybe the radio is holding some sort of setting. Resetting to default (like with the device) might do the trick..
.
Thanks for the idea. I'm kind of worried though plugging out the battery, because there are many settings besides the radio that probably will be lost if I do so.
You know all these new cars and their complicated electronic sensors...I don't mind losing minor settings for the car that I have adjusted, my main concern is that if anything goes wrong, I will probably have issues with the car's warranty. I still have 2 and a half years of warranty.
I' will probably have a talk with the dealership before doing that.
Many thanks for your thought though
hi i like to know if pairing went okay with the 6.1 rom because if so maybe when you switch back to this rom problems are solved
Nop
Unfortunately no
It was one of the first things I tried. Switching back to the official 6.1 ROM. I actually kept it saved on my hard disk and I tried it a couple of times - I mean when I tried other ROMs from time to time - hoping it would resolve the issue.
And that's the strange of this case. I mean, it was working (pairing) fine the first couple 3-4 months when I unboxed the phone, and then out of a sudden, no pairing.
First logical thought would be that something has changed in the car's settings. But I have an Athena X7500 that pairs fine with the car up to this day. My car's dealership isn't much of a help...
Second thought - phone settings mess-up. But as stated in my original post, no factory reset helped, no switching to other ROMs, no playing around with settings.....
I'm really desperate. I'm thinking to switch to another phone, but besides this problem I'm quite satisfied with the TP2. And I do "need" Windows Mobile based phones, because I sync with Thunderbird's Lightning via BirdieSync for a long time now, and I am not willing to revert back to the horror days of MS Outlook. I carry my TB profile for over 2 years now and its customized the way it suits me for manipulating my 10+ email accounts.
Thank you very much for your reply though
Any other thoughts/recommendations?
i downloaded firmware 1.20 from volkswagen hope this will help me will try tomorrow with my laptop i am with a touch adapter connected to rns 510 no pairing with tp 2 at the moment for me the only workable solution is a duo sim with my old blackberry bold meanwhile i love he TP2 so hope i can get it to pair with my premium touch adapter volkswagen carkit any other suggestion or solutions are very welcome cheers
And that's the strange of this case. I mean, it was working (pairing) fine the first couple 3-4 months when I unboxed the phone, and then out of a sudden, no pairing.
what radio where you on first couple of months
Nice thought about the radio....but unfortunately I don't remember.
Currently I am using v4.49.25.17 that was upgraded with the latest official HTC firmware of WinMo 6.5 if I am not mistaken.
I am 90% positive though that the problem started before even upgrading, back when I was using the first release of WinMo 6.1 and the unknown version of radio, and everything was working ok at the beginning.
I know, I am not helpful at all but frankly, this problem surprises me as much as you.
You mentioned a firmware upgrade - for the RNS right? Not the RCD....
Do you by any chance happen to know if there is a firmware upgrade for the RCD510 and where can I get it from?
Thanks for your help.
looking-g:
I just realized that you are having a problem with the RNS.
Did you had this all along? I mean, did you ever managed to get it working and then it stopped, or you never had it paired?
I am just asking to see if I can be of any help...
well the problem is not with the rns 510 but with the touch adapter which come delivered as premium carkit i use to pair everything with it blackberry,s nokia,s and also a touch dual (niki) without any problem but now with my new phone the tp2 its not pairing it also never did after i fill in the pincode it gives an error message it should connect with the touch adapter my car by the way is a golf gti mk6 cheers, mark
You kind of lost me there.
What do you mean "touch adapter"? Is this a component of the RNS 510? Because I have never heard of it...
Have you determined a solution?
I just picked up a new VW Jetta with premium bluetooth and it worked the first time and not since.....
You guys are scaring me -- I have an Audi A3 TDI scheduled for delivery in January, and it'd be a bummer if its Bluetooth didn't work. FWIW, my current car has a Sony MEX-BT3700U headunit and the Tilt 2 pairs with it in both handsfree & A2DP modes.
3waygeek: You will be probably fine. I think Audi does not have anything to do with Nokia regarding building their units.
Wish you best luck with that.
Extra info
Some more information regarding the whole subject:
I found out that when I press the "Emergency Call" option on the touch screen of the RCD510 (i.e. try to call the international emergency number - 112) and then immediately end that emergency call, the next time I try to pair the Touch Pro 2, it does pair!!! But it has no signal at all, and if you try to make a call you get a "Dial up error" (or something like that, can't remember exactly)!
Any ideas what could be the reason for that?
Thanks.
Your problem is common to VW/Audi's. Chances are the car kits have the rSAP Bluetooth unit. I had exactly the same issue in my A6 using rSAP, as soon as i upgraded to wm 6.5 the problem went away.
Yes, indeed the car kit uses the rSAP profile, as well as the Phonebook Access Protocol (PBAP), but both of these protocols are supported by the TP2. Actually the rSAP functionality I believe is support in Windows Mobile 6.1 and above - I mean besides the fact that your phone's BT radio must support it in order to work correctly. (Without being entirely sure for the above comment).
And some more info for those who are willing to give an opinion:
I did eventually decided to remove the car's battery. I left the car without battery for approximately 40 minutes. Now here's the strange part: All the settings of the card indeed reset (window settings, light settings, etc) BUT the RCD510 was not affected at all by the battery removal! Yes, as weird as it might sound, the station list was there, bass/tremble customizations were there also, everything in place (regarding the radio unit always).
Side note for all those who might remove the battery from a similar VW car:
As soon as I plugged the battery back on, I had somewhere 15+ warning indicators on my dashboard turned on. From ABS malfunctions, air pressure, EPS malfunctions etc. But after rolling the car for 3m or so everything turned off. Back to normal. Probably had something to do with the electronic sensors giving proper signal to the car's "brain". Just my opinion.
Now, besides that - the fact that removing the battery didn't perform a reset of the radio (RCD510) unit, I also tried reverting my Touch Pro II to a WM 6.1 cooked ROM - don't remember which one exactly - but that didn't helped either. Same stupid error message after pairing for 2 secs: "No bluetooth connection to mobile phone".
And to confirm again: My X7500 (Athena) with a cooked WM6.1 ROM from michy still pairs and works fine. (Tested it last night, just to make sure that battery removal didn't had any side-effects)
PLEASE help me if you can. Any suggestion/recommendation will be greatly appreciated.
PS: I decided to contact the car's dealership to inform them about the whole problem. I will post soon regarding how that went...
Thanks for your time everyone...
By the way, does anyone knows the proper way to reset the RCD 510 to it's factory default settings? Besides the function that is given inside the menu itself - I already tried that. I was just wondering if there was a "hidden" way that will entirely wipe all settings/customizations from the unit....
Hi guys! I m in the same situation: Sirocco + TP2 with 6.5 from Orange. Any progress from your side? Ideas would be greatly appreciated!! Cheers, P
Unfortunately!
No friend, sorry. No news yet.
I do keep the post open hoping that someone will give me a new year's present
It's nice to know that I am not alone though
For sometime now ive been having issues with my Desire not syncing contacts with my parrot handsfree kit, ive been putting it down to differences in roms as like a lot of people on here ive tried most available, however the first OTA froyo rom i tried was this one http://forum.xda-developers.com/showthread.php?t=741775
Everything seemed fine but i got itchy feet so tried another which also seemed fine both were syncing fine, it tried a few more and then it started to fail with syncing contacts when you first start the car, so anyway i decided to go back to the first OTA rom i tried sucessfully and thats now doing the same, it just seems really weird that it works fine until i flash with another rom.
Any ideas?
me too
Dont have an answer but have same issue with phone book not syncing to BMW bluetooth ULF. Works in more recent cars but not 2004 vintage. Must have changed the protocol in some way that broke it ?
seedar said:
Dont have an answer but have same issue with phone book not syncing to BMW bluetooth ULF. Works in more recent cars but not 2004 vintage. Must have changed the protocol in some way that broke it ?
Click to expand...
Click to collapse
I could understand that situation but mine worked on a certain rom, then on a new rom didnt but when i went back to the one that originally worked it didnt work any more
yay success, it was because either a) pictures stored against contacts and or b) auto sync of contacts with gmail, saw parrot had a forum and looked on there and someone was having the same issue, they suggested a fix by removing pics from contacts and also disabling autosync which is fine by me ill just enable/disable it from the power control widget when im getting in the car