Power button issues - EVO 4G Q&A, Help & Troubleshooting

For the past couple days I've been having issues with my power button. It seems that, for about half the day, the power button will not work at all. I can't bring the screen back up or shut the screen off. Also every now and then the power menu that comes up when you hold the button down would just come up by itself. The other half of the day it seems to work just fine. For now I've just set it up so the screen never turns off, but obviously that drains power and will make me butt-dial everybody. I took it into a Sprint store but of course it started working like 10 mins before I got there so all I got was a "failed to reproduce problem" thing. After much haggling on the phone with them today I convinced them to send me a replacement, although it's backordered. Has anyone else had an issue like this with theirs? I searched around and couldn't find much. Does anyone know a way I can lock the screen without turning it off? That would come in handy while I wait for the replacement.

Related

Orbit Switching off

Has anybody else had a problem with there Orbit randomly switching it's self off. This usually happens when it's in my pocket (and I thought it was a mobile phone!!!).
Do you mean the black screen of death? As far as I could tell my Orbit is still responsive but the screen will not turn back on when this happens.
It's perplexing, but it has happened to me a couple of times- I usually have to remove the battery to turn it off and get it back to a workable state again.
No mine turns it's self off. I have to press the power button to reboot it.
If you hold the power button in for long enough the Orbit powers down (fully off) anything catching the button or perhaps a faulty on/off button?
Could be but I try to be carefull when I'm handling it and to not touch the button. It's turned off when I put it into it's cradle in the car before so I reseated the battery and thought that had cured it. Didn't take too long before it started again though. I'll probably take it back to the O2 shop and get the run around from them!!!!
its been a long time since the thread was written but I have the same problem---if you apply pressure to the back panel, it switches itself off for some reason....anyone else got the same problem?
oh yeh that is so true! I just tried it whilst reading it here and it switched off. could be just the way that it was made. although i suggest you dont keep trying it could be potentially harmful!.

[Q] Screen not starting up for power button

Hi,
I started to get a weird problem since last week. I've had this phone for about 3 months now and never had any problem like this.
It all started one morning when I wanted to stop phone alarm. The alarm was going off but the screen was black. I pressed the power button to wake up, but it was still black. After couple of times pressing the power button the screen came up. First it was not that often but the situation started to get worse. It came to that I can sometimes cannot turn it on for a long period of time. I need to keep pressing power button, volume buttons and eventually it will come up.
This is what I've found so far:
1) When the power button is pressed, although the screen doesn't start up, I can see the three buttons at the bottom lighting up. So it is not a problem of the power button.
2) When the power button is pressed, although the screen doesn't power up, the screen seems responsive. I can feel the vibrations when I tap (I have a startup password)
3) When the phone is connected to a power supply, screen always starts up without a problem.
4) Screen will start up more frequently when the batter power is high.
It seems as though there is a connection between batters power and the screen not starting up. But then again, once the screen comes up (after not starting up), then it works fine, until I turn the screen off.
Has anybody experienced anything like this before?
I did a factory reset thinking it might be some application I installed but it didnt help.
I had to send this phone once to repair the speaker and cost more than $80 just for courier. I don't want to spend another to get this fixed.
Thanks.
I have this problem or a problem very close to this. I have a HTC One X (international version). I'm running the latest version and updates and the problem has existed for at least the last two updates.
Android Version 4.1.1
HTC Sense version 4+
Software number 3.18.401.1
I have the screen lock pattern turned on.
Sometimes when I hit the power button, the phone does not turn on and so I press it again and only after a third press does the phone turn on. I then unlock the phone and use as normal. So, several times per day I have to press the power button three times before the phone turns on. But other times I press the power button once and it turns on straight away. I've just turned the pattern unlock off to see if this makes any difference. I'll start to record the exact details of when I experience this and see if we can work out a common cause.
Hopefully if enough people report this problem then they can send out an update to fix this problem.
exazonk said:
I have this problem or a problem very close to this. I have a HTC One X (international version). I'm running the latest version and updates and the problem has existed for at least the last two updates.
Android Version 4.1.1
HTC Sense version 4+
Software number 3.18.401.1
I have the screen lock pattern turned on.
Sometimes when I hit the power button, the phone does not turn on and so I press it again and only after a third press does the phone turn on. I then unlock the phone and use as normal. So, several times per day I have to press the power button three times before the phone turns on. But other times I press the power button once and it turns on straight away. I've just turned the pattern unlock off to see if this makes any difference. I'll start to record the exact details of when I experience this and see if we can work out a common cause.
Hopefully if enough people report this problem then they can send out an update to fix this problem.
Click to expand...
Click to collapse
I'm pretty sure this is a hardware issue. I bought mine from Expansys and sent it back to them for repair. It's been more than a month and they say they're still reparing it.
In my case it was impossible for me to start the screen up with power button no matter how much I pressed it. The only thing that worked for me was to press the back of the phone just below the camera. So it seems like a hardware issue. But on the other hand, at times when I can't get the screen turned on no matter what I do, I'd turn the phone off and start again and the thing would start up like nothing happened. So while I'm pretty sure it is a HW issue, I'm not sure how a power restart makes it work.
For me I don't think that this is a hardware problem as it only started happening once I did the big upgrade from 4.0 to 4.1 and then it follows a specific pattern. That is three power button presses will always turn it on. Less frequently I also get a problem where the power button turns on the three lights on the soft buttons but the screen remains black. I then hit the power button to turn it off, and again to turn it on and the phone is back to normal again.
Is yours an international version? I bought mine an international version and had it shipped to Australia.
solved?
Hi - did anyone ever solve this? This is happening to me with my HTC desire X after having had the screen repaired, so I think it is hardware related, but the shop doesn't know how to fix it! My screen also does not turn back on when I want to end a phone call and pull the phone away from my face anymore. These problems seem related as they started at the same time. I would be grateful for help!

[Q] Screen doesn't turn on!

Dears, help me please!
I have my nexus 7 for 3 months. It was working pretty fine before... BUT... last thursday I left it charging overnight, I woke up turned the tablet alarme off and put it on a backpack to travel.
When I tried to turn it on the screen just did nothing!! The strange thing is: when I got mail it notifies me... the pulse light is active but the screen doesn't show.
I tried to charge it, hold the power button, hold the power + volume down buttons and nothing solved.
Anyone has/had the same problem?
I have the same problem. It happened a couple times already but I could not figure out why it happens. When I push the power button long enough it just restarts. It happens only when its laying around a couple hours like over night.
The tablet returned from the repair.
It seems like they changed the mainboard. Sadly there was something behind the camera glas and there were scratches on the screen. So they had to send it in again. Then they also changed the screen. All this took about 3 weeks.
I suggest claim for repair its definitely a hardware issue. Now my Nexus is running flawless and I am waiting for the Lollipop update.
You could also just try holding volume down + power for about 30 seconds. I've had a couple of freezes before where holding down the power button did nothing. But, holding down power + volume down worked. This is assuming you weren't flashing or doing something else, this is only if you were using the tablet as normal and it just suddenly won't turn on.

[Q] Please help! Random power off won't boot!

Okay I will try to sum this up. My S3 was working fine and everything randomly I noticed issues with battery calibration It would be 100% then I would calibrate it and then unplug and then I'd instantly drop to 85%. Thought It was a battery issue and made a point to get a new one later. Then it kept working for another month or so then It started really screwing up the shutdown menu would randomly pop up and I'd back out of it.
Then randomly 3 seconds later the phone reboots. And it would keep doing that randomly I thought it might be a power button issue. Then as time goes on it got really bad to where it would simply reboot and not make it past the bootloader, It would not "reboot" more like a complete shutdown then I'd have to power it again and have it do the same thing. Seeing how I could not even make it past the bootloader I got a new battery, waited a week for it and then I put it in and the same issue happened. It would not get past the bootloader.
So I kept trying and trying and trying and it finally booted past that. And it stayed on for a whole night. I did everything on it I normally would and it was working great. Then the battery was getting low so I plug it in and was going to calibrate it after it was charged, I go back to it and it's dead again won't get past the bootloader once again. I'm completely out of ideas on how to fix this I pop'd off the button and blew in there and the button seems fine and everything still no change. I also can not get into recovery. It trys and loads but then shuts off. Anyway if anyone has any ideas on what this is or how to fix please help! I need my phone back! Thank you.
I'm running MOAR Lite version.
UPDATE: Took the phone apart and took a close look at the button it looks 100% fine...I saw a video on youtube that requires you to complete tear the button off and it works. But I don't know if the button is my main cause of this issue or if it will actually work. Some says it works, some says it does nothing...Please let me know thanks...
UPDATE 2: It will show that battery with spinning circle in it for like 1 second then turn off again. (When it is plugged in)
That's odd. But when it comes to the power button, dismantling and what not 90% of the time will show 0 issues. It will look perfectly fine when it's not. You playing with the power button I assume were pressing hard and normally to try testing it. It's a common issues on this version of the S3 to have faulty power button and you would need to get it repaired. Odly even slightly atmospheric changes can cause it to act different at different points. Some days it works fine, other days a very slight brushing over can cause it to screw up and trigger a manual shut down (holding for like 10 or 15 seconds).
Assuming that it is the power button, or to try, just do a variation of things to the power button itself. Use your finger nail to jiggle it around with different pressures. During boot if it shuts off, it could be the power button internally stuck, just jiggle it around.
This is all I can think of unless you bring it in to get repaired.
I was encountering the exact same problem. I would try to get into download mode and it would sit at the "Downloading" screen for about 5-7 seconds then the display would go blank. It won't make it into recovery either. Based on the above recommendation I took the whole phone apart and sprayed a lot of compressed air directly on the power button mechanism and the plastic case pressing the button in. I didn't see anything broken with the button when I did that.
It seems to be working now, I can boot into my Rom. Don't know how long this fix will last.

[Q] Galaxy S3 Hyper-sensitive Power Button

Good Morning everyone. I am new to Android Central. I have never had any issues with my G3 prior to yesterday. I was using the phone all day no issues and then suddenly I went to press the power button to check my email and barn it rebooted so I thought it was just a random crash and was ready to move on. When it came back up (restarted) initially I was able to access it. Once the screen dimmed and turned off I tried to press the power button to turn it back on and it vibrated and rebooted again. I tried removing the battery for a couple minutes places it back in and then trying again. Same result. I removed the case and the back panel and noticed that simply putting my finger anywhere near the power button even on the black plastic near it caused it to be activated. Most of the time by the time it reboot it shuts back down. There was a couple times I was able to keep it running. Now being one of those. I backed up my files and did some reading but wanted to get some feedback specific to my situation. Any help would be wonderful and please let me know if you need more information I would be happy to provide.
Sounds like your power button is starting to fail and needs to be replaced, mine did the same thing. You can usually get that fixed relatively cheap.

Categories

Resources