[Q] Need help - what should I do? - Desire Q&A, Help & Troubleshooting

I was originally running the rooted sense 2.2 rom and I attempted to switch to Leedroid using Rom Manager's "Install from SD Card". That went fine until it crashed at the end of the install process in recovery... Then it wouldn't boot (stuck at white background with green HTC). I attempted to redo the r5 root flash as it was the only other rom I had and I could still get into fastboot, but now (I'm assuming) it's stuck on the radio update part of the flash in step1... The fastboot flash zip command completed with an OKAY, but it hasn't yet rebooted - all I have is a black screen with the HTC logo and a full green progress bar.
I know unplugging it while doing a radio update is a big no-no, so what should I do? It's been sitting there like that for the last 20 minutes.
Edit: Well, after waiting for a while I bit the bullet and just unplugged it... And it works fine. No idea why it froze, though...

Related

White triangle with yellow exclamation point (!). battery pull?

tried to boot in to recovery and got a screen with a white triangle and a yellow exclamation point inside above an android robot.
the suggestion is to battery pull. anyone else have this issue? if so, what's the procedure on reboot?
thanks.
I think that's the Stock Recovery Menu ( i kept getting it when i was trying to install the Patches from Fresh & used Clockwork Recovery because the two weren't compatible ).
Do you definitely have a Custom Recovery installed?
You pressed the power button instead of the optical trackpad when trying to reboot from custom recovery
Optical trackpad? What Evo has one of those? LMAO!
Flash Clockwork recovery or AmonRa recovery. You have stock (no recovery).
It is hard to answer your question without further specifics.
For example:
1.) Are you rooted?
a.) If yes, what are you trying to boot into recovery for? - flash radio/wimax or rom???
b.) If no, go to Android Development and read how to Root and install a custom recovery.
2.) If you have a custom recovery, what is it?
to put it simpler than this.
1. What ROM do you have?
2. What custom recovery do you have?
3. What step did you do to get into recovery? - from android or from boot up?
*If you pull a battery while trying to flash a radio, you might have the coolest looking paper weight in your part of the town
Hello shawnathan9!
I have similar problem with my Nexus one.
I have a rooted phone (used superoneclick to root)
Installed clockworkmod and flashed it with the recovery image.
Since I wanted to install latest cynogenmod I used clockworkmod to install the latest radio for it. Now when the phone rebooted it is hung diplaying a white triangle with and exclamation mark inside it. I haven't removed my battery yet and have plugged it to a power source. Can you help me ?
You're rooted, but you are trying to access recovery, but you don't have one loaded. Search google for Amon_RA or clockwork recovery to flash. If you have rom manager, you should be able to flash either or and it should work.
I did the unrevolked 3 and got it rooted. Then I booted it up into the recovery mode and ran clockworkmod. Now how do I get a rom (like mikfroyo 4.5) on it? I tried booting and selecting a zip from my sd card(which mikfroyo 4.5 is on it in zip form still) But it would not finish/aborted ? What am I doing wrong? I have the sptint HTC EVO 4 g phone with all the latest hboot ect on it.
charlieborg44 said:
I did the unrevolked 3 and got it rooted. Then I booted it up into the recovery mode and ran clockworkmod. Now how do I get a rom (like mikfroyo 4.5) on it? I tried booting and selecting a zip from my sd card(which mikfroyo 4.5 is on it in zip form still) But it would not finish/aborted ? What am I doing wrong? I have the sptint HTC EVO 4 g phone with all the latest hboot ect on it.
Click to expand...
Click to collapse
It did say no sd-ext found, skipping backup of sd-ext. in Clockworkmod. Still getting the white triangle with the yellow ! in it?
bhaismachine said:
Hello shawnathan9!
I have similar problem with my Nexus one.
I have a rooted phone (used superoneclick to root)
Installed clockworkmod and flashed it with the recovery image.
Since I wanted to install latest cynogenmod I used clockworkmod to install the latest radio for it. Now when the phone rebooted it is hung diplaying a white triangle with and exclamation mark inside it. I haven't removed my battery yet and have plugged it to a power source. Can you help me ?
Click to expand...
Click to collapse
That is part of updating the radio. Just let it finish and it will reboot into recovery. The phone has to go to that screen to update the radio. You may be able to save it by booting into that screen and just let it sit there for a while...eat dinner...take a dump...do whatever and come back and see if your phone is in recovery. I would turn it off and charge it first to make sure you have enough battery to finish the update.
I have the same experience, when I updates to Gingerbread (OTA).
housry23 said:
That is part of updating the radio. Just let it finish and it will reboot into recovery. The phone has to go to that screen to update the radio. You may be able to save it by booting into that screen and just let it sit there for a while...eat dinner...take a dump...do whatever and come back and see if your phone is in recovery. I would turn it off and charge it first to make sure you have enough battery to finish the update.
Click to expand...
Click to collapse
Hello thank you so much for your information. I will leave the phone in that mode (screen hung with triangle an exclamation mark inside + android green logo below) and plug in the charger, until tomorrow morning. Then I have a question if tomorrow the phone still hung in that screen mode, what I have to do?
If you can give me solution, I would be very thankful. Happening in August 23, 2011.
Android_maniac said:
Hello thank you so much for your information. I will leave the phone in that mode (screen hung with triangle an exclamation mark inside + android green logo below) and plug in the charger, until tomorrow morning. Then I have a question if tomorrow the phone still hung in that screen mode, what I have to do?
If you can give me solution, I would be very thankful. Happening in August 23, 2011.
Click to expand...
Click to collapse
After 2 days, trying to download updates firmware (OTA) GingerBread on HTC Evo 4G, I failed because the phone has been rooted, I found a "superuser permision" app. in the the All apps menu.This meant it is a rooted android phone, which will not permitted to update firmware OTA, is this true? If yes, this is the cause of screen hung at triangle with exclamation inside, and android green logo below.
August 26,2011.
Thats what my phone is doing the clockworksmod menu will not come up only see the
white triangle with the exc symbal with the android symbal. have to pull the battery out ot reset but phone still loads up and works.

Stuck on white boot screen

Been installing custom roms for a while now.
Whenever i try to install a new rom ( tried several ones, next sense, leedroid , defrost) i get stuck on the first white boot screen with the green htc screen.
Iv used full wipe, cache, wiped sd partition, formatted sd card, different sd card.
I can install an older version of next sense rom, but that is about all i can do.
im on bootloader v0.8, used the latest version of clockwork mod ( have tried with several versions) iv tried booting with the sd card out.
iv tried so many different times with different variations but none have been successful other than the nextsense v4.0 that i can boot to, or an nandroid back up of nextsense v4.0.
Any help?
I had the same this morning after fixing a recovery boot problem (re-pushing the reboot file to the system/bin/ directory on the device).
I resolved the hanging white screen problem by rebooting (via volume down + power button) into recovery with Clockwork Mod (v2.5.0.7 for Desire) and manually reflashed (N.B. without wipe!) the already installed ROM (I had upgraded to Nextsense 6.0 earlier that morning without difficulty, so reflashed that version).
Maybe this helps, but sounds like you may have already passed this station...
Good luck!
After that my Desire booted up normally.
Edit: Bootloader is v0.75
Can you get any response from running
#adb logcat
??
If it sits there saying "waiting for decice" for ages then yeah, something isn't right (possibly a bad flash of boot parition), but if you get anything, even a bootloop of sorts, the output may help narrow down whats going on!
I'm stuck here too. After I flash a custom ROM it just sits there after booting for the first time. I've tried so many ROMs, but I haven't even gotten to see a single one, yet!

Problem with Desire

Hey guys,
I went to flash a new stable build of Froyo on my Desire this morning.
And i backed up using Clockwork, and then the ROM all installed fine. But once the phone had booted up, it stayed on the custom boot logo, despite the keypad lighting up, the green charge LED coming on and me being able to lock and unlock the phone.
So i figured that this was a problem and went to back to restore my old ROM and carry on like i have done many times before. However once i have booted into Clockwork, and gone to the recovery section, i select my most recent backup and the device then says "No Files Found" in the recovery zip.
And when i try to install update.zip from my SDCard the device just flashes up with installation text for about 2 seconds then vanishes and goes back to the clockwork menu having done nothing
What can i do?
i wouldnt worry about it too much
your phone completely works and youre not restricted of any access
seeing that clockwork is not finding any files have you tried making a new backup?
have you tampered with the recovery lately?
if recovery is not finding any files then maybe there is a problem with it, and if i were you i'd reroot my phone with unrevoked to re-install recovery.
if your recovery actually just does not work it could mean that the recovery image is corrupt, this can be fixed by installing a RUU (note that this will unroot your phone but re-install the recovery image).
if this is not the case then im sure im soon to be corrected by someone more knowledgeable than me
Well, i wiped the Cache and Data and now the phone boots up and functions fine, however both mobile internet and Wi-Fi both dont work, but i figure this is just the rom i am using.
So i'm just gonna reroot, sideload clockwork and what not and then try putting the Desire HD rom on it haha.
Thanks for the help

Failed to Load! :(

I am currently running Domination CM10 build 6 and was previously using the kernel that came with the rom.
Just updated to latest bricked which first just wouldnt boot (flashed kernel via fastboot and zip via recovery as normal) either normally or load recovery so used viper flasher to do kernel and modules (replaced ones it came with to latest ones from the kernel zip)
Now phone boots fine but after a few seconds it comes up "Failed to Load! " in a box at bottom (similar to boxes when something is given root access, checked and phone still rooted and that side working fine) but the box never seems to fade away so stays stuck over top of everything.
I only have 2 widgets... clock & calendar both of which load up fine, boots into recovery now if I boot normal and then use rom "reboot into recovery" but whenever I try to use it the phone just reboots, if I hold volume down when powering on it just boots as normal and dont load hboot
Any ideas? Know its not major issues and can probably be fixed with a wipe but tbh was lazy and didnt backup before flashing kernel thinking I wouldnt need it so hoping someones had similar and knows a simpler fix which wont involve wiping
ViaraiX said:
I am currently running Domination CM10 build 6 and was previously using the kernel that came with the rom.
Just updated to latest bricked which first just wouldnt boot (flashed kernel via fastboot and zip via recovery as normal) either normally or load recovery so used viper flasher to do kernel and modules (replaced ones it came with to latest ones from the kernel zip)
Now phone boots fine but after a few seconds it comes up "Failed to Load! " in a box at bottom (similar to boxes when something is given root access, checked and phone still rooted and that side working fine) but the box never seems to fade away so stays stuck over top of everything.
I only have 2 widgets... clock & calendar both of which load up fine, boots into recovery now if I boot normal and then use rom "reboot into recovery" but whenever I try to use it the phone just reboots, if I hold volume down when powering on it just boots as normal and dont load hboot
Any ideas? Know its not major issues and can probably be fixed with a wipe but tbh was lazy and didnt backup before flashing kernel thinking I wouldnt need it so hoping someones had similar and knows a simpler fix which wont involve wiping
Click to expand...
Click to collapse
try to reflash stock kernel, maybe it will be ok again, in worst case you'll have to wipe

[Q] One X Stuck on boot

Good evening everyone,
I've been scanning the forums and everyone's problems seems a little different. First of all, i was running CM10 and missed some of the sense features, so i jumped to ViperX.
1. Everything seemed fine on first run, got the snakey tail, but then i noticed it was hanging just after this with the "Htc quietly brilliant" screen and snakey long gone!
2. So i reboot my phone, this time, it just hung on the first start screen and never so much as flinched.
3. I booted into recovery (CWM) and couldn't even get there, it was like a blink of the recovery screen and then it vanished and rebooted, I wiped everything clean by doing a factory reset and tried to reboot again. Same result.
4, Flashed TWRP and managed to get into recovery mode and install ViperX again but on reboot I'm stick at that same ol' "quietly brilliant" screen, this time with no snakey.
I can get into hboot to use fastboot and into recovery in TWRP but cannot get into the OS. I'm not clear as to whether this is a problem with hboot or the way the rom is installed but any suggestions or such about how i've gone about things and how to go about getting around this problem would be great! Gracias! :good:
Did you flash the correct boot.img?
BenPope said:
Did you flash the correct boot.img?
Click to expand...
Click to collapse
Strangely, and by the luck of trial and error, I tried 2 boot images. The first was for CM10 (again, this was trial and error) and now i've just rebooted from the ViperX one and managed to get back in. Back up in progress! Phewww!!!!
You get my thanks for replying anyhow!

Categories

Resources