Related
Good day fine sirs and ma'ams.
I would just like to say I love my Tilt 2, and have had it for a few months now with no real problems and this is about my 4th WM phone.
As of about a month ago, I have been unable to connect or sync the device to my PC.
I have WM Device center 6.1 (the latest from the website)
I am running windows 7
I had been able to sync the phone until about a month ago.
I have unchecked the box in the USB to PC for faster data synchronization.
Essentially, when I plug the phone into the computer, it just acts as if it is connected to a charger. Nothing comes up on the phone and nothing comes up on the computer. It just charges. I have even installed and uninstalled WMDC a couple of times.
I really am at my wits end here.
My question is, is there a fix for this apart from sending the phone in? I am able to flash the phone via the microsd card, and even tried going back to the e2 rom that is as close to the ATT rom as I could find.
I did find the stock rom, but it does not come with the image file, just the ruu.exe I believe. I cannot flash roms via the USB cable either, so I am only able to change things like I said, via the microsd card.
Any help is greatly appreciated! Thanks!
And yes, I have searched, and have found many other people posting in other threads saying they have the same problem, and everyone just says to uncheck that one box, which I have done, so that is NOT the problem.
Also, I would just like to add that when I go into the windows directory and attempt to run activesync (repllog.exe) I get the following message.
(cannot communicate with the pc because of the fllowing remote networking error (Error 608)
I have seen others ask help for this question without an answer on xda-dev also.
Thanks again! If anyone has the solution here I think a lot of people will be very happy!
:-(
turn off your firewall then pug ur device in and see if that works... works for me... perhaps your firewall started blocking it for some reason... other than that good luck
I had similar things happen to me in the past. While the phone is connected, check Windows Update whether there is a new version of Sync Center. This has fixed the problem for me.
i appreciate the suggestions.
However,
I have the firewall disabled and it still does not connect.
I uninstalled and reinstalled the WMDC using the latest software directly from the website. There appears to be no updates for the program once it is installed.
Any other suggestions?
Have you tried multiple USB cables, multiple USB ports, or even multiple computers? I've had USB cables which aren't capable of data transfer, as well as USB ports on the computer go bad. You might also considering a hard reset, to ensure no software on the phone could be causing the problem. If it's truly the USB port on the device that's broken, then you're in bad shape if you want to return it to AT&T for repair. You may be able to flash the AT&T stock ROM, but you won't be able to restore the AT&T stock SPL, which they check when fixing the device, so you may very well have to fork over some money to get it fixed. Best of luck
My phone is doing this also.
Multiple PC's, multiple USB ports, multiple cables. All of which worked perfectly beforehand...
The other thing to try is Internet Sharing - when I go in there and press 'connect', then it says Check USB cable connection, connect USB to any of my PC's/laptops and it doesn't register on the phone.
This phone is really a piece of ****. I could rant on for hours about the stupid problems there are with this handset, I'm sure I'm not alone. Perhaps I expected too much.
Anyway, if anyone has any info on how to make my USB connection work I'd love them forever...!
freakygeek said:
My phone is doing this also.
Multiple PC's, multiple USB ports, multiple cables. All of which worked perfectly beforehand...
The other thing to try is Internet Sharing - when I go in there and press 'connect', then it says Check USB cable connection, connect USB to any of my PC's/laptops and it doesn't register on the phone.
This phone is really a piece of ****. I could rant on for hours about the stupid problems there are with this handset, I'm sure I'm not alone. Perhaps I expected too much.
Anyway, if anyone has any info on how to make my USB connection work I'd love them forever...!
Click to expand...
Click to collapse
Could be a faulty device...my phone connects to every computer, every time. take the phone to your provider and show them whats happening.
Also, i've had issues with the standard mini USB ( http://www.meditronik.com.pl/doc/mini/usb-kabel-mini=foto=canon.jpg ) not properly connecting/loosing connection.
Try a HTC usb it might work better: http://bestcellbuy.com/bargainsea/Pictures/HTC/OEM_Home_Charger_USB_Cable/OEM_HTC_Data_Cable_07.jpg
I've tried the HTC USB lead that shipped with my phone to no avail.
I think the device is faulty (surprise surprise). It charges from USB perfectly fine, every time.
I'll post back once I find out what Telstra say... it's obviously still under warranty but that isn't really the issue - It is just such a major PITA having to switch to a loan phone and deleting confidential business data etc from my phone before sending away for repair etc etc...
Thanks for the help though, it is appreciated.
Well, I've got my USB going again. Not sure exactly what I've done, but basically I pulled the battery out for a few minutes and replaced it, turned on and off the 'high speed' checkbox in USB Connection Settings, and it has come good.
****box phone.
Somehow mine started working again last night too. Same cable, same port and everything.
Really odd, but I'm not complaining at the moment!
It seems this problem is spreading, as i'm being terrorized by this stupid bug... This afternoon I've tried to get internet on my laptop (by connecting my phone to it), but it was just charging my phone, so I thought the cable was broken. Next I tried it at home on my desktop computer, with another cable, and it did the same (several reboots have passed).
I don't know if someone already tried it, but when you enter the bootloader, it says "Serial". Normally when you connect the USB-cable it changes to "USB" (at least with my kaiser, universal and wizard). on my phone it didn't...... can anyone check this for me??
to enter bootloader: hold volume-down-button and pres soft-reset-button.
thanks in advance!
InjecTioN said:
It seems this problem is spreading, as i'm being terrorized by this stupid bug... This afternoon I've tried to get internet on my laptop (by connecting my phone to it), but it was just charging my phone, so I thought the cable was broken. Next I tried it at home on my desktop computer, with another cable, and it did the same (several reboots have passed).
I don't know if someone already tried it, but when you enter the bootloader, it says "Serial". Normally when you connect the USB-cable it changes to "USB" (at least with my kaiser, universal and wizard). on my phone it didn't...... can anyone check this for me??
to enter bootloader: hold volume-down-button and pres soft-reset-button.
thanks in advance!
Click to expand...
Click to collapse
Verified - I cannot flash with USB.
Bright.Light said:
Verified - I cannot flash with USB.
Click to expand...
Click to collapse
thanks for your help.
I've flashed my device with the newest official from HTC, and it still doesn't connect with the usb-data (i used the "flash-from-SD" -method).
The strange thing was that it happened suddenly... i never use a headset with cable, so its almost impossible the connector is broken. Any ideas people??
btw, the device isn't SPL flashed, so i can't use other roms beside the official roms...
Same thing happened to me. No USB sync, no USB connection at all; it only charges. Thankfully I had a chance to flash to a custom ROM before this happened.
The only way I can sync my data is to use a bluetooth USB in my PC. Works quite well with my contacts, calendar, & email, but I have yet to try to transfer any large files.
The bluetooth USB I went with was ASUS USB-BT21 USB 2.0 Mini Bluetooth Dongle. It is VERY low profile, too, but I would have liked for it to come with an end cap like those USB flash drives, otherwise I have yet to find any complaints about it. The price was great and so much cheaper than spending an additional $70-$100 to get my USB port on my device fixed.
Here's my saga: No Syncing, No USB Connection
Best of luck!
Debbie
this happened to me before...when you connect your devivce to your laptop/comp, are you guys not getting the little pop up that says activesync & disc drive...??? if so jus make sure at least one of those are checked...sometimes both of the circles will be blank, thus the comp will simply charge it...
unplug the device for approx 10 sec then plug it in again, and the box should pop up again...
also...if you are tethered to your comp using the tp2's internet, your comp will not recognize your tp2's storage...
da9th_one said:
this happened to me before...when you connect your devivce to your laptop/comp, are you guys not getting the little pop up that says activesync & disc drive...??? if so jus make sure at least one of those are checked...sometimes both of the circles will be blank, thus the comp will simply charge it...
unplug the device for approx 10 sec then plug it in again, and the box should pop up again...
also...if you are tethered to your comp using the tp2's internet, your comp will not recognize your tp2's storage...
Click to expand...
Click to collapse
was the first thing I checked. thanks for your input though
InjecTioN said:
thanks for your help.
I've flashed my device with the newest official from HTC, and it still doesn't connect with the usb-data (i used the "flash-from-SD" -method).
The strange thing was that it happened suddenly... i never use a headset with cable, so its almost impossible the connector is broken. Any ideas people??
btw, the device isn't SPL flashed, so i can't use other roms beside the official roms...
Click to expand...
Click to collapse
I did not know one could flash to new ROM by use of the SD card?
Mine is de-HSPL, so now I can not select another ROM anymore. (Got the 6.1 default one again)
Bright.Light said:
I did not know one could flash to new ROM by use of the SD card?
Click to expand...
Click to collapse
I've never used the SD-Card method myself, but now will have to due to my USB port no longer working.
I've been syncing by using Bluetooth USB and just tried transferring files via Bluetooth and it worked like a charm! Smaller files were instantaneous and large files took longer (of course), but also worked fine.
I just tried copying over a RHODIMG.nbh file and that bugger worked (188MB)... Excellent!!!
I did buy a USB card reader to transfer files, just to be on the safe side, but I must say that this little Bluetooth USB that I picked up is working awesome.
Debbie
i exactly have the same problem.I guess i need to send it back
hey there,
i was searching the web and the forum though couldnt find any issues for connecting the desire z via usb to ubuntu (10.04 for me). however, it doesnt work with my DZ. i bought an addition micro-usb-connector (htc) and the phone does only charge and not ask, what kind of connection i want.
once, i read (and experienced) that you have to connect the usb to the back usb-ports (not the front ones) to get it working - that was with my desktop pc. now, using my laptop, the connection (mounting the sd, tethering or whatever) wont work on neither of the laptop's usb-ports...
so maybe there are two questions/issues:
does anyone have similar issues or maybe no problem with connecting the phone to
1) a laptop?
2) ubuntu 10.04?
thanks for your anwsers!
This might be nothing to do with it, but I found that I couldn't use adb with my phone when I was using a third-party USB cable, even though it sync'd (HTC Sync) fine. This was using XP. When I went back to the original HTC cable, adb worked fine.
Hi there,
I have a laptop with Ubuntu 10.04 (lucid) and everything works fine here. If i connect my DZ with my laptop a menu appears on the DZ asking if i want to charge only, use as disk drive, HTC sync, USB tethering and internet passthrough. I havent tried HTC sync but the rest works fine. I can even synchronize my music with Rythmbox or Banshee. So what i'm saying is that it should work out of the box.
My DZ is stock European edition, no root or s-off yet.
I suggest you first look in the settings of your DZ and look for "Connect to PC". There you should see the settings for the default connection and a "ask me" option. (My default is charge only and "ask me" is turned on). If this doesn't work maybe you can test your device on another computer to see if the menu does appear when you connect your phone.
Thanks for your replies.
steviewevie said:
This might be nothing to do with it, but I found that I couldn't use adb with my phone when I was using a third-party USB cable, even though it sync'd (HTC Sync) fine. This was using XP. When I went back to the original HTC cable, adb worked fine.
Click to expand...
Click to collapse
I was trying to get adb working but ended up in getting an no-permission-error. Couldn't figure out the problem...
mordecai83 said:
Hi there,
I have a laptop with Ubuntu 10.04 (lucid) and everything works fine here. If i connect my DZ with my laptop a menu appears on the DZ asking if i want to charge only, use as disk drive, HTC sync, USB tethering and internet passthrough. I havent tried HTC sync but the rest works fine. I can even synchronize my music with Rythmbox or Banshee. So what i'm saying is that it should work out of the box.
My DZ is stock European edition, no root or s-off yet.
I suggest you first look in the settings of your DZ and look for "Connect to PC". There you should see the settings for the default connection and a "ask me" option. (My default is charge only and "ask me" is turned on). If this doesn't work maybe you can test your device on another computer to see if the menu does appear when you connect your phone.
Click to expand...
Click to collapse
My DZ is also European,standard stock Rom,nothing done (yet). I checked the settings you mentioned and it says "ask me".
Next thing that is really weird: I can enable the tethering option (but cannot use it), yet the connection bypass (or what it is called in English) is greyed out. Tomorrow, I'm going to try the usb cable from the box...
ok, i checked with the original usb cable, still i wont get a connection. as my laptop sits on a docking station, i also tried the back-ports (at the docking station) and un-docked it - no success. none of the three ports will grant me access to the phone.
furthermore, i booted into windows xp and it will show a removable device, but i cannot access it (says something like "enter a device").
it seems to me, that it has something to do with my laptop (lenovo t61) and its usb ports... i have no idea, what to do, so i'm happy about any advice or experience...
Try the guide on adb at http://forum.xda-developers.com/showthread.php?t=865685 , it tells you where to get the Windows drivers.
thanks for the hint, i tried to adb on linux (without success), but going for the windows try...
i'm wondering about, why the phone does not simply give access to the sd-card, like any other removable device. why do i need to install htc sync (including the drivers)? when plugging any removable dev for the first time, it normally just installs the drivers and you'll get access... where is the problem here?
abprie said:
i'm wondering about, why the phone does not simply give access to the sd-card, like any other removable device. why do i need to install htc sync (including the drivers)? when plugging any removable dev for the first time, it normally just installs the drivers and you'll get access... where is the problem here?
Click to expand...
Click to collapse
I know what you mean, I would have thought it would "just work" if you connect the phone in "Disk Drive" mode, where the SD card is mounted on the PC.
You're not using a USB hub, right, you've tried connecting straight to your PC's USB ports ?
no, there is no usb-hub used. the connections i tried were always direct ones.
The next thing to do would be to try to connect your phone to another computer. Because it could also be a problem with your phone rather than your usb ports.
mordecai83 said:
The next thing to do would be to try to connect your phone to another computer. Because it could also be a problem with your phone rather than your usb ports.
Click to expand...
Click to collapse
well, the phone connects perfectly to my desktop-pc...
It's a long shot, but I did some Googling on "Lenovo T61 usb problem" and saw one report from a guy whose USB didn't work on his T61 with Ubuntu until he upgraded the BIOS
Steviewevie,you are doing my work,you know
Well thanks for the info,do you happen to have a link?
Edit:thinking about that... updating the BIOS??
abprie said:
Steviewevie,you are doing my work,you know
Well thanks for the info,do you happen to have a link?
Edit:thinking about that... updating the BIOS??
Click to expand...
Click to collapse
I only had a quick look, so a more extensive look may well turn up some useful info. The thread I stumbled across was at http://ubuntuforums.org/showthread.php?t=673501
Ok,i took a look at the link (thanks!), but that deals with ubuntu 7.04. To me, it doesn't seem to be the issue that usb ports are not working, as other usb sticks and my touch pro 2 were recognized without any problems.
Imho,it is like when I connect to the front ports of my desktop, when the connection doesn't work either, so I'll have to live with it. Thanks for your support anyway (I'm still open for new approaches)
BTW: it really bugs me that I can't just plug that device and use it as a mass storage like any other...
i have absolutely no idea why, but now it works... today, when i was charging the phone via usb (the thing, that was working from the beginning), my DZ rebooted spontaneously and afterwards it just showed the missed connection options...
no i just need to figure out how to use the internet-forwarding (dont know the correct translation - what i want is to use the internet from my pc on the phone) ... any clues?
for those who have a Nexus already, how is this phone with file management & tethering?
i normally use "root explorer" to access files i've either copied to my phone or downloaded & of course, when i connect my phone to my pc i just tick off "disk drive" and am able to easily access all my files/downloads/etc on the phone from my PC. is everything for the most part, still the same way with the Nexus?
also, i use PDANet for tethering(wired) to my PC, is that option still available on the Nexus to?
sorry if these seem silly, my curiosity just got the best of me. thanks
Root explorer will perform similarly for browsing files on the device, but it doesn't have USB mass storage support, so hooking up to the PC to browse files is slightly different. (And FWIW, you never needed an app to mount a phone for storage to the PC. You can just check the box from the notification area when you plug it in...).
It has built in tethering via WiFi, Bluetooth, or USB. You don't need an app.
Thanks for the reply, now the big question will Verizon allow tethering, or will they shut it down and make you pay $20/mo ?
bisquick24 said:
Thanks for the reply, now the big question will Verizon allow tethering, or will they shut it down and make you pay $20/mo ?
Click to expand...
Click to collapse
Different people think different things, but my thought is they'll probably be blocking it. Verizon loves money
I wonder if anybody knows if any of the other providers disabled this on the GN released in europe? I know its not direct comparision because nobody loves $ as much as VZW, but it might give a hint.
Hi
My brother got a HTC sensation a few weeks ago.
Since WIFI is bad at our place our computer uses cables for internet. So my brother connected his HTC to the computer and got one of the next options popping up (after installing HTC sync on the pc):
*INTERNET PASS TROUGH
This means he uses the internet from the computer TO his phone. So he got internet on his HTC thanks to the computer.
This is not as easy with the galaxy nexus apparently. I used all possible options in the settings to try and make this work.
Isn't there an app or another way to enable this?
(don't tell me all those tethering stuff cuz i've already tried it and it doesn't do jack..) So this has NOTHING to do with WIFI. It's pure internetcables ,pc, usb cable and cellphone.
If you got a solution could u write step by step what I should do (and for others too) ? I'm kind of a newb
Thanks!
Okay, so this is my situation. I just moved houses as I'm starting university and I am not going to have Broadband for at least a month because of house line problems. I thought I was going to be just fine because I have an All-You-Can-Eat data plan that allows me to tether and download as much as I want, no restrictions. That was until I dropped my Nexus face-down on the street and the screen is now completely smashed. So basically I am stranded in a new town with no friends, no internet and no phone. Luckily, I have the phone insured against accidental damage, so my provider will fix it free of charge, but it will take one week before I can even send it, and another ten days after that before I can even begin to expect it back. I bought a USB Mobile internet dongle and that's what I'm using to write this, but it is desperately slow and it loses connection often... And Pandaria goes out in three days so I'm at my wit's end right now. I'm on the verge of buying a relatively affordable BlackBerry just so I can use my SIM in it and tether, but would rather not.
My Galaxy Nexus is rooted, and is running Jelly Bean. I can tell the phone does turn on because I can receive calls (and answer them using the headphones' button).
My question is if it is possible to set up tethering via a PC Desktop Software. I draw the comparison to RIM's BlackBerry Desktop Software which allows enabling of mobile internet modem capabilities by only connecting the BlackBerry via USB and clicking a button. Absolutely no need of touching the phone. Because the way I see it, it *should* be theoretically possible to edit the phone's settings values SOMEHOW by having access to it from a PC via a data cable, just as in Windows one can edit a registry key instead of enabling an option in Control Panel. Granted, it is a more complicated, archaic method, but the alternative exists.
Any ideas will be greatly appreciated, thanks.
That's a harsh situation you are in. I don't think there is a way to tether like that. Although I'm not very sure. I don't tether much.