Hi There,
I have a Desire on T-Mobile UK and tried to debrand last night without success. I created the gold card using the gold card tool and that looked fine. I then ran the stock firmware installation from within Windows however I am getting error 171 and something to do with the USB connection.
Am I being really silly and doing something wrong?
Thanks,
Ian
Ian
Can I propose an alternative to what you are doing? I am assuming that you have a valid goldcard that you are using. I updated my stock t-mobile branded phone to debranded 'HTC froyo with sense' yesterday evening. I found this amazingly simple and I hope you do the same as well. Here's what I did.
1. Download file PB99IMG_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28 U_4.06.00.02_2_release_126984_signed.zip from http://forum.xda-developers.com/showthread.php?t=684259 and rename it to PB99IMG.zip and store it onto your goldcard. This way you do not need any computer at all to push the update. You can do everything on the phone.
2. Insert the goldcard into your phone.
3. Get the phone into recovery mode by restarting by pressing the volume down key on phone startup (power the phone from being switched off). There is an option for recovery where the phone will automatically read the flash rom file and present you with options. It will then ask you if you want to apply the update or not. Press volume up button to accept.
4. Let the rom upgrade do its job. It will reboot a few times.
5. Once its applied all updates, it will restart, i.e. you will see the HTC boot animation and subsequently the phone will be ready.
6. Ensure that you set up your wifi connectivity or that you are on HSDPA now.
7. Go to settings > about phone > updates and click the check updates button.
8. The system will automatically download and install froyo now....
9. All smiles..... I would suggest that you reboot the phone once the froyo update is over.
did you set usb debugging in phone settings and set it to charge only? Do you have device drivers for desire (htc sync installs them).
I debranded mine yesterday. Created a goldcard (klutsch method, tool) pluged in usb with mentioned settings, ran WWE 1.21.405 RUU (exe) had to reboot my comp in order to finish the booloader driver install. Then I ran the .exe again and it went smoothly. With the stock rom and goldcard inserted I updated to froyo.
AH!!!!!!!!!! I didn't have it on charge only doh! I will try it again tonight thanks JayKaySLO.
If however this doesn't work I will try your version s1977.
I thought I was being stupid ;o)
Thanks for your help.
Ian
If I were you, I'd try to root using UnrEVOked3 first, and then just flash a pre-rooted Froyo ROM, rather than debranding to get the update OTA.
Two reasons for this:
1. If UnrEVOked3 works for you, it is very simple
2. You won't be updating your HBoot to the latest, currently unrootable, version, which will allow you more flexibility in future with custom ROMs.
Regard,
Dave
Flashing a pre rooted rom seems like a better option. Just waiting for the dust to settle around any small bugs. Debranding is surely just as much of a warranty void so what's the benefit, you just end up with a security locked phone.
s1977 said:
Ian
Can I propose an alternative to what you are doing? I am assuming that you have a valid goldcard that you are using. I updated my stock t-mobile branded phone to debranded 'HTC froyo with sense' yesterday evening. I found this amazingly simple and I hope you do the same as well. Here's what I did.
1. Download file PB99IMG_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28 U_4.06.00.02_2_release_126984_signed.zip from http://forum.xda-developers.com/showthread.php?t=684259 and rename it to PB99IMG.zip and store it onto your goldcard. This way you do not need any computer at all to push the update. You can do everything on the phone.
2. Insert the goldcard into your phone.
3. Get the phone into recovery mode by restarting by pressing the volume down key on phone startup (power the phone from being switched off). There is an option for recovery where the phone will automatically read the flash rom file and present you with options. It will then ask you if you want to apply the update or not. Press volume up button to accept.
4. Let the rom upgrade do its job. It will reboot a few times.
5. Once its applied all updates, it will restart, i.e. you will see the HTC boot animation and subsequently the phone will be ready.
6. Ensure that you set up your wifi connectivity or that you are on HSDPA now.
7. Go to settings > about phone > updates and click the check updates button.
8. The system will automatically download and install froyo now....
9. All smiles..... I would suggest that you reboot the phone once the froyo update is over.
Click to expand...
Click to collapse
Hi, can you tell me if you were on HBOOT 0.80 or 7.5 when you did this please.
I guess I will need to get the phone unlocked for the root?
Dilemma??
Thanks again.
I did mine last night and was also getting the USB error. This is what I did and it worked perfectly:
(With Goldcard inserted)
-Boot up phone
-Connect to PC > Set to HTC Sync
-Run the RUU WWE 1.21.405.2 ROM
If/when you get the USB error message onscreen, your phone should be on a black background with the HTC logo. At this point I did the following:
-Leave the phone on the HTC logo (as it was when you got the error).
-Unplug the phone (you will not be on a white screen with coloured text)
-Plug the phone back in (you will now be back to the HTC logo)
-Re run the RUU
It worked for me, just wish I could remember where I read it before!
Nice one Airwalker82 )
Thanks
claudefrog, I was on HBOOT v0.8 and i still am after the upgrade. TBH, i was confused with all the information with updating the phone and eventually went down with the system option rather than the computer bit as I use a mac anyways.....
No worries, let us know if it worked for you.
I'll try to find the original source for where I found that little workaround, it might be useful for others.
**Almost forgot, you need to enable USB debugging on your phone before you connect it to your PC else it wont work.
I will give it another go tonight and let you know how I get on.
Thanks for all the advice!
Ian
I just tried the SD card way, putting in my gold card and it worked fine.
Only issues, still cannot see for an update. I think maybe because of vodafone network.
I may try the same method to install 2.2 since it worked so nice.
Is there a chance HTC have pulled the update?
Glad to hear the SD card way worked )
Ok, Reflashed with SD card way and no sim card...now it sees the update.
Thats the trick I guess. No vodafone SIM
Result with the debrand and update to 2.2. I did what you said Airwalker82 and it was a walk in the park!
Thanks again for all the advice.
Ian
Glad to hear it worked for you....
Excellent! Glad that worked! =)
It certainly does feel quicker - no little laggy moments when doing things a little too quickly, and no more juddering when in a game or something and a message comes through =D
Enjoy your new FroYo =)
I think Froyo is an improvment however I do find surfing the net isn't quite as smooth as before, but still happy.
Cheers!
Related
HI there - I have got myself in a pickle and would appreciate some help...
I have a TMobile branded Desire. I wanted to get Froyo so did the following:
1. Got a new mem card and created a Gold Card
2. Installed RUU_Bravo_HTC _WWE_1.21.405.2 _Radio_32.36.00.28U _4.06.00.02_2 _release_126984_signed
3. Replaced the Gold Card with my normal mem card (which has all my pics etc; on)
4. Ran OTA Froyo update.
I think the FROYO install didnt complete fully as it now randomly reboots by iteslf (every 2 or 3 mins) I have no signal, cant connect via USB to my pc (to downgrade) - all in all it's not exactly bricked but I cant really use it all.
Please help Anyone any ideas?
vilbs said:
HI there - I have got myself in a pickle and would appreciate some help...
I have a TMobile branded Desire. I wanted to get Froyo so did the following:
1. Got a new mem card and created a Gold Card
2. Installed RUU_Bravo_HTC _WWE_1.21.405.2 _Radio_32.36.00.28U _4.06.00.02_2 _release_126984_signed
3. Replaced the Gold Card with my normal mem card (which has all my pics etc; on)
4. Ran OTA Froyo update.
I think the FROYO install didnt complete fully as it now randomly reboots by iteslf (every 2 or 3 mins) I have no signal, cant connect via USB to my pc (to downgrade) - all in all it's not exactly bricked but I cant really use it all.
Please help Anyone any ideas?
Click to expand...
Click to collapse
Will your phone boot up completely before rebooting? Can you get into recovery mode (vol down + power)?
Yes it will completely boot up. And yes I can get into recovery mode. Do you have a cunning plan?
The easiest thing to do would be to do a factory reset (somewhere in settings or from quickboot menu), although if indeed the flash didn't complete successfully this is unlikely to work, it would be the quickest if it did.
Failing that you will probably need to re-flash the device. You will need your goldcard and a rooted update file (zip format as I don't think you can install RUU from recovery).
It is likely that you will need to re-root your device first though..
What is your HBOOT version?
Thanks for the replies so far...
I've already tried a Factory Reset and that made no difference...
Yes I think a zip file is the way forward but I am struggling to work out which one and how I think install it.
My HBOOT is 0.80.0000
Also you mention I will need to re-root my device but I didnt root it in the first place.
Thanks again for help so far. Fingers crossed you can point me in the right direction...
I had this problem. Go download:
http://liveimage.htc.com/OTA_Bravo_Froyo_HTC_WWE_2.09.405.8-1.21.405.2_release4dua3bcrut4wrv30.zip
Then rename the file to update.zip and copy onto your goldcard - then insert into phone. Now go to recovery mode, select recovery, then when the red triangle thing comes up hold the volume down button when pressing the power button. You should be able to update now.
Oh and I didn't have my phone rooted.
vilbs said:
Thanks for the replies so far...
I've already tried a Factory Reset and that made no difference...
Yes I think a zip file is the way forward but I am struggling to work out which one and how I think install it.
My HBOOT is 0.80.0000
Also you mention I will need to re-root my device but I didnt root it in the first place.
Thanks again for help so far. Fingers crossed you can point me in the right direction...
Click to expand...
Click to collapse
Sorry, was assuming it was rooted and that the update un-rooted it. Since your un-rooted I think the link that er_yeah posted is the official zip update from HTC, that should do the trick.
Thanks er_yeah. Tried as you said. Went into recovery but cant get rid the red triangle thingy. Vol down and power doesnt do anything... Maybe I didn't put the update.zip file in the right place. I just copied it to the root of the sd card. There weren't any other files there - jsut folders (Rosie something was one of them).
Please stick with me
The problem is you tried to run an update without your goldcard.
You will be able to restore the phone by inserting your goldcard, booting into fastboot mode (back + power) and running this RUU:
http://shipped-roms.com/shipped/Bra...3.00.32U_5.09.00.20_release_140022_signed.exe
Do not try to run any OTA updates without your goldcard.
thanks mikey242. Hopefully er_yeah can help me out.
vilbs said:
thanks mikey242. Hopefully er_yeah can help me out.
Click to expand...
Click to collapse
No probs, hope you can get it sorted.
teppic74 said:
The problem is you tried to run an update without your goldcard.
You will be able to restore the phone by inserting your goldcard, booting into fastboot mode (back + power) and running this RUU:
http://shipped-roms.com/shipped/Bra...3.00.32U_5.09.00.20_release_140022_signed.exe
Do not try to run any OTA updates without your goldcard.
Click to expand...
Click to collapse
After a few confused minutes working out Fastboot things are looking promising. New ROM has now updated and will try in a sec with OTA Froyo (with goldcard). Thanks a lot so far all 3 of you...
Will update in a minute!
vilbs said:
Thanks er_yeah. Tried as you said. Went into recovery but cant get rid the red triangle thingy. Vol down and power doesnt do anything... Maybe I didn't put the update.zip file in the right place. I just copied it to the root of the sd card. There weren't any other files there - jsut folders (Rosie something was one of them).
Please stick with me
Click to expand...
Click to collapse
to get rid off the triangle press vol up and power button, that will get you into recovery...
hope this helps!
vilbs said:
After a few confused minutes working out Fastboot things are looking promising. New ROM has now updated and will try in a sec with OTA Froyo (with goldcard). Thanks a lot so far all 3 of you...
Will update in a minute!
Click to expand...
Click to collapse
That RUU takes you directly to Froyo.
I used the original RUU as someone on Tmobile has updated to Froyo using it...
Anyway the phone is now debranded and on Froyo and working! So thank you everyone for helping out. I think my key mistake was trying to update OTA without the Goldcard. I have learned my lesson and wont repeat it.
OK I had a slight issue that I had lost all my text messages and Notes I had created in ColourNotes - but this seems like a small price to pay for what was at one point an unusable phone!
Thanks again guys!
Sorry for disappearing, glad that you got it sorted out!
Hope anyone can help me. Has soon tried everything without success. Phone is rooted with bootloader 0.80 Radio. 5.09.00.20 March 29 2010 and defrost system version 4.3
Have bootloader 0.80 which says wrong version when booted, and Touch panel fail sometimes. The phone can boot up sometimes, but after 2 to 3 my phone goes black and can only be started up again by taking out the battery. Is there any possibility to get the phone back to the original as it can be sent for repair. Believe, in fact it could be something hardware does not. If it can not be done, can it be made without it costing more than a new phone
Have u tried another rom?
If u want to send it to repair u need this RUU to unroot
http://shipped-roms.com/shipped/Bra...3.00.32U_5.09.00.20_release_140022_signed.exe
I use it to unroot mine, but u need to be sure your screen is amoled, this is for AMOLED screen ONLY
Sent from my HTC Desire using XDA App
Thanks for the quick reply. Have tried with another ROM without success. Have tried with a RUU. Unfortunately, the phone will not be in usb mode when i try to sync HTC. Windows writes that there is connection to usb port. Can you get RUU in zip format so it can be loaded via Update.zip / recovery mode. The RUU you recommend that can be used for Danish phones. Whew, lots of questions.
Yes u can install the RUU threw Sdcard, try and find a SAPPIMG containing froyo2.2 or u can try and downgrade to 2.1 and see if the phone works properly, i only have links to the 2.1 here u are:
http://shipped-roms.com/shipped/Bra...8U_4.06.00.02_2_release_126984_signed_txt.zip
1. download the file to SD card.
2. rename to PB99IMG.zip
3. boot into recovery (turn phone on while holding down volume)
4. just let it load the zip file and press yes when asked to install
This will get u back to 2.1 so then u can try OTA updates or running RUU´s again.
manchesterob said:
Thanks for the quick reply. Have tried with another ROM without success. Have tried with a RUU. Unfortunately, the phone will not be in usb mode when i try to sync HTC. Windows writes that there is connection to usb port. Can you get RUU in zip format so it can be loaded via Update.zip / recovery mode. The RUU you recommend that can be used for Danish phones. Whew, lots of questions.
Click to expand...
Click to collapse
Probably u have USB Bricked, look for threads explaning how to fix USB Brick..
Many thanks for your help. Try it during the night. The problems with the phone locks and the screen goes black and can only be restarted by taking the battery out, because it surely wrong bootloader or brincked usb
Have tried to install PB99IMG.zip. Unfortunately, when it only to load up a bit of the column before the phone goes black again, and battery removal to restart. Anyone have an explanation for this. I completely drained of ideas
U seem to have a true brick.I broker my friends magic.
The new jtag riff box can now fix bricked desires
Sent from my HTC Desire using XDA App
hi for everyone
i think i have a big problem
my desire is broken.some days ago i upgraded my mobile via ota and my phone closed it is not opening now.when i intend to upgrade rom or use offical rom my phone closes and i have to wait for a while without its battery plugged to open.
when i wait for an hour by unplugging the battery it opens for 2 or 3 minutes nd closes again.
i cannot make goldcard because of not opening.or bootloader uprade downgrade
i cannot load official or any other rom it sometimes shakes 5 or 6 times.
my mobile phone is not branded in my country some of my friend brought it from foreign country so i cannot send it to service
how can i repair it.what do you suggest
sorry i forgot
my device shows on bootloader
bravo pvt1 ship s-on
hboot-0.93.0001
microp-031d
touchpanel-synt0101
radio-4.06.00.02.2
is it rooted or not.i cannot root it because it doesnt open 3 or 4 second
when it opens i enter my personal info like i purchased first then it closes
Tough situation. I haven't thought of this stuff in 5 months so I may be wrong. Don't hold me to this but I think there may be a way to change the boot loader via the SD card. I think I read it a few weeks ago. I remember it because I thought it may come in handy someday. I'll take a look and see if I can find the link again. Not so sure about the root. Can you get in to the boot loader? Press the power button while holding the vol down?
Either way I'd try unrevoked on it. If its booting then running for a few minutes, unrevoked may be able to catch it and do its thing. With that done you can go on to change the radio and Rom at will.
It sounds like you will be able to fix it but its going to take a lot of reading. All of the information you need is here. Finding it is always the problem.
Chris
Sent from my HTC Desire using XDA App
yes i can get into bootloader but when i try to upoad offical ruu rom 1.21.405 it closes and everything repeats again
tthanks my friend if you help me i glad to you.....thanks....
Ok here's what I would do.
1. Go to unrevoked.com and select your phone. Download the package for the desire.
2. Check if it will work with hboot 93. Mine uses 83. There were issues with 93 back when the desire was first rooted. Unrevoked is now version 3, this may have solved the issues. Maybe someone with more recent experience can comment on that.
3. Get the radio and Rom you want. I'm using leedroid 2.3b and the newest radio. This can be found on the development section of this site.
4. If everything checks out, restart in bootloader and plug in your phone. It will ask for the Android 1.0 drivers which are in the unrevoked package. Point the installer to the location of the drivers and let it install. Unplug your phone and open unrevoked. It will say waiting for device.
5. This is where I'm not sure what will happen. Try restarting the phone normally and plug it in. It may pick up the device and restart it in bootloader to automatically do its thing and install clockworkmod. If so then you are home free.
6. Read all of the instructions for flashing radio and roms. Restart your phone, in boot loader. Don't press anything until the green words have appeared and disappeared. Select recovery & press the power. Count to 5 and press power + up volume. This can be tricky and you may have to do it a few times to get the hang of it.
7. The radio & rom must be stored on your SD card. Follow the instructions from the Rom cook to do the rest. Mostly, select zip from sdcard and apply for Rom. Then radio in 2 separate restarts. You should wipe all data.... wait a minute. Did you wipe all user data from your phone before upgrading? That may be causing the restart!
Let me know....
You need to learn all you can about the things you are about to do. Read all the instructions you find and do lots of searching. You are your warranty in this game!
Sent from my HTC Desire using XDA App
thanks my friend i will try ...i hope it will turns life
i will inform you
you are great
when i tried to load rom it says unexpected file error
i cannot load the rom 00becau0se it waited at white screeen and there isnt bootloader menu on white screen only writes ruu
Hello everyone,
im in urge need of help. I somehow failed while updating to 2.3 :/
I thought that the update was done since the loading bar went to the right and stood there for a good couple of minutes. So i took the battery out. Now as i turn the phone on i only get to see the htc sign on a white background.
I tried holding the volume down key and the power button at once. I get into the recovery menu or whatever it is called. There i've chosen factory reset: i can see a update screen again. The bar doesnt move from left to right though. After 15 sec the phone resets itself and i can see the htc logo again
Recovery only shows me a phone image with a exclamation mark
I never installed anything custom on the phone. It is as i bought it from the shop. I initially had 2.2 on it.
Anyone help please
I will guess you need to put a ROM file on your SD card and select install file from sd card in recovery. If something went wrong during update you proberly dont have a Android system installed right now.
But if your on stock rom I'm not sure if that will be possibl, but hopefully somebody with more knowledge could answear that...
Good luck
If you pulled the battery while it was updating something like the radio, then you have messed it up.
I'd suggest downloading the Gingerbread RUU and trying it again. Sadly you may now lose all the data on you phone.
andyharney said:
If you pulled the battery while it was updating something like the radio, then you have messed it up.
I'd suggest downloading the Gingerbread RUU and trying it again. Sadly you may now lose all the data on you phone.
Click to expand...
Click to collapse
screw the data !
I just want my phone back
If anyone could hit me up with the details how Im supposed to bring back my desire hd to live id be forever grateful!!!
Click the link in my sig, head to RUUs and download the Gingerbread RUU. Once downloaded, plug you handset into your computer, run the RUU~.exe .
If that fails to work, with the RUU~.exe still running open a search window on your computer and search for "rom.zip", I will be in a hidden temp folder somewhere in your userdata.
Rename this rom.zip to "PD98IMG.zip" and copy to your SDcard. Now turn off your phone, and power on while holding volume down. The bootloader should see the PD98IMG.zip and flash it for you.
garman76 said:
I will guess you need to put a ROM file on your SD card and select install file from sd card in recovery. If something went wrong during update you proberly dont have a Android system installed right now.
But if your on stock rom I'm not sure if that will be possibl, but hopefully somebody with more knowledge could answear that...
Good luck
Click to expand...
Click to collapse
dont think that this is possible, as he never had a custom revovery à la ClockworkMod installed. So he cant choose which zip to flash.
but i think that andyharney got the solution for this
andyharney said:
Click the link in my sig, head to RUUs and download the Gingerbread RUU. Once downloaded, plug you handset into your computer, run the RUU~.exe .
If that fails to work, with the RUU~.exe still running open a search window on your computer and search for "rom.zip", I will be in a hidden temp folder somewhere in your userdata.
Rename this rom.zip to "PD98IMG.zip" and copy to your SDcard. Now turn off your phone, and power on while holding volume down. The bootloader should see the PD98IMG.zip and flash it for you.
Click to expand...
Click to collapse
Damn! I can't find the option to make a e-blowjob but rest assured that if such an option would be there, you'd be the first one to receive it
Thanks a lot! It works. I had my doubts as during the whole instalation my phone showed the htc logo on the white background several times(i thought that it got worse), but in the end i got it back runing!
So happy! Thanks 1.000.000 times and once again: THANKS!
Which method worked the RUU~.exe or the PD98IMG.zip?
Hey guys, pretty much what the title of the thread says. I try to unroot my phone via the HTC sync root, and when I click on the RUU to downgrade the phone, it instantly connects and I get an error message telling me to connect the phone.
Does anyone know how to cure this? It's been driving me crazy for ages now, wish I never rooted my phone in the first place!
Any help would be greatly appreciated! Thanks...
Lol rooting is better than that stock crap from htc.
If it's disconnecting maybe reinstall the drivers. Pretty sure there is another thread around here somewhere.
Swyped...
You can also run the RUU when the phone is in fastboot. Turn the phone off, turn it on again holding the back button and when on the white fastboot screen connect to the PC and run the RUU again
EddyOS said:
You can also run the RUU when the phone is in fastboot. Turn the phone off, turn it on again holding the back button and when on the white fastboot screen connect to the PC and run the RUU again
Click to expand...
Click to collapse
Tried that mate, and now I have a black screen, I think it's bricked it.
I know its turned on though because it vibrates & my pc still recognises it.
Any idea what I do now?
My ROM or RUU whatever its called is... 2.12.110.4 & I'm on T-Mobile.
Meaple said:
Lol rooting is better than that stock crap from htc.
If it's disconnecting maybe reinstall the drivers. Pretty sure there is another thread around here somewhere.
Swyped...
Click to expand...
Click to collapse
I want to unroot because me Desire started acting weird since I rooted. Started rebooting all the time & not full booting up. Had enough of it.
Which RUU did you use? As there isn't a FroYo T-Mobile one chances are you've flashed one for an AMOLED screen and you have SLCD
EddyOS said:
Which RUU did you use? As there isn't a FroYo T-Mobile one chances are you've flashed one for an AMOLED screen and you have SLCD
Click to expand...
Click to collapse
I think this one is the one I tried first...
RUU_Desire_C_Verizon_WWE_2.36.605.1_release_signed_with_driver
Then I tried...
RUU_Bravo_Froyo_HTC_WWE_2.09.405.8_Radio_32.43.00.32U_5.09.00.20_release_140022_signed
Been getting the 131 error & 140 error. I don't have a clue on what to do to fix this... As you can tell, I'm totally new to this lol.
Well, the first one wouldn't work at ALL as it's for American CDMA Desires so thank god that didn't work!!
Use this one:
http://www.multiupload.com/LEJCW182AH
EddyOS said:
Well, the first one wouldn't work at ALL as it's for American CDMA Desires so thank god that didn't work!!
Use this one:
http://www.multiupload.com/LEJCW182AH
Click to expand...
Click to collapse
Haha like I said, I'm totally new to this!
Thanks for the link mate, will try now.
BTW, will I need to do a gold card or something?
Didn't work. Got the 131 error again. Arghhh, this is driving me crazy!
To get a froyo desire branded by t-mobile you have to run a special method:
Download these two files:
CustomRUU
2.12.110.2-1.21.110.4_release3uop1mw9unpc376h.zip
1.) Move the ota on your sd card and rename it into "update.zip"
2.) Run the installer. It extracts all needed files into a folder of your choice.
3.) Installer should start script automatically. If not, run "installer.bat" manually.
4.) Follow the instructions to the end.
5.) You are now in fastboot mode. Press power button to get into hboot.
6.) Choose recovery and enter with power button.
7.) If the red triangle shows up, hold volume up button and press power button. Now choose "Apply sdcard:update.zip"
When this operation is finished, you have a desire branded by t-mobile running froyo rom.
Sometimes the phone crashes when you install apps from the market. To fix this do the following:
1.) Turn off the phone
2.) Boot phone into hboot (start it with pressed volume down and power button)
3.) Navigate to "CLEAR STORAGE" and enter it.
This comment wipes the phone (so you loose all data) and resets all settings. After a reboot the market should work.
Translated from this serious german forum:
http://www.android-hilfe.de/anleitu...369-desire-mit-slcd-rebranden.html#post746176
Ah man looks like I'm gonna need a micro SD card adapter...
Is there anyway possible that I don't have to do anything with my SD card & can just use a RUU just to fix it??
lfcjake said:
Is there anyway possible that I don't have to do anything with my SD card & can just use a RUU just to fix it??
Click to expand...
Click to collapse
You have to use an sd card to get your working again, as far as i know.
Even if you want to run a stock froyo rom without any branding, you have to create a goldcard with linux and putting it in your phone, before you can run the ruu linked by eddyos.
And by the way, micro sd card readers aren't that expensive.
MatDrOiD said:
You have to use an sd card to get your working again, as far as i know.
Even if you want to run a stock froyo rom without any branding, you have to create a goldcard with linux and putting it in your phone, before you can run the ruu linked by eddyos.
And by the way, micro sd card readers aren't that expensive.
Click to expand...
Click to collapse
Ok I'll give it a shot & will let you know the results haha.
Thanks for your help mate. Fingers crossed!
Ok can someone do a step by step guide please on how to do this.
I've done the ADB part, but when I'm on the CMD command prompt thing, I type 'adb devices'
And it says list of devices attatched...
And theres nothing there?! No serial or anything! What am I doing wrong? This is driving me insane.
Ok I found out what my serial is.
It's : HT0APPL00658
What do I do now?? Can anyone actually help me please?