Computer won't recognise my Desire. - Desire Q&A, Help & Troubleshooting

I was wondering if anyone has any idea why. It's not a hardware issue, I just had it plugged in at work, same cord etc. I have tested the USB port with other devices and it works correctly. When I plugged in my Desire, it said installing new device and came up with this error:
Blah, can't post screenshots. It says:
Device driver software was not successfully installed
USB Composite Device X FAILED
This is my Device Manager. I tried completely uninstalling HTC Sync and the HTC Driver installer, then re-installing and the same thing happened. I'm confused and frustrated, anyone know?
And Device Manager shows the
USB Composite Device with the yellow triangle with !.

shot in the dark but try updating your pc's usb drivers

first try another computer...could be a pc problem or maybe usb brick?

I fixed it. I found in another thread after a while of searching, I uninstalled Sync, turned off my pc. While the PC was off, I unplugged all USB's bar modem/mouse/keyboard, then turned on my pc again. Booted my Desire with Disk Drive in a rear port, instead of front and it works!
Cheers ^_^

All u needed to do was uninstall the USB disk drive drivers in device manager, then plug it in again. It will detect it!... happens to other flash disks too occasionally...
Sent from my HTC Desire using XDA App

I have the same problem in extended form:
I have tested my Desire by installing the file "_HTC Wildfire_setup_3.0.5422.exe"
and then plugging the Desire in "DiscDrive"-Mode into 5 PCs,
Windows 7 32, 64 (OK, that went wrong of course), XP Pro 32 and Ubuntu Linux...
It is not recognised at all. It seems to be totally ignored by the PCs.
As if nothing would be plugged in. No searching for a driver, not announcing a new component -
simply nothing.
Do i have a non functioning USB-interface in my Desire, a damaged USB-cable, or
what is wrong here.
It never connected, since i have it, and i do not have a reference-Phone
to check, if the PCs are the reasons, or the phone.
Uninstalling & restarting, and reinstalling & restarting i have tried a hundred times -
with no luck of course.
Is therte a checking routine or a trick, how i can persue the error from here?
Thank you for any clue!

I have had the same issue but only when I plugged my Desire to usb-hub. When it's connected directly, all work flawlessly.
Sent from my HTC Desire using XDA App

Interesting, but i don't use any hubs in my testings.
Any other idea, how to veryfy the function of the Desire's USB as such?

Related

[Q] Windows XP - unknown device

After rooting the phone (in this case to leedroid) I have been having trouble with 2 xp machines at work.
Both detect the phone as "unknown device".
Doesnt matter what I select, charge only, sync, disk drive, adb usb debugging.
I have uninstalled / reinstalled htc drivers repeatedly.
Tried just using android sdk drivers.
I have deleted
C:\WINDOWS\system32\drivers\Wdf01000.sys,
2. Remove: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Wdf
3. Remove: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Wdf01000
I have also removed anything under Vid_0000&Pid_0000
Everytime I plug it in, windows detects it as unknown device. It wont let me update the drivers.
Help please!
what do you mean it prevents you from manually updating drivers? has it ever worked before? have you tried showing hidden devices via command line then removing the old device manually and then reconnecting it?
yep did all that hidden devices stuff too.
You wont believe this but I saw a post about someone using a thicker usb cable. I recently switched to using a retractable micro usb cable at work. I brought the original htc usb cable into work today, plugged it in xp detected the phone straight away!!!!!
who would have thought a cable was the problem!!?? All that wasted time!

Problem with usb connection to laptop

I'm having usb errors from my laptop and it is being caused by my evo. I can connect it just fine and use it as a disk drive if needed but my windows 7 (64 bit) keeps saying that the usb device is not recognized. I tried disabling and enabling it. It's definitely the phone. Is there a special driver for android I need to install to my laptop? Any other suggestions if not?
Try deleting all the drivers and installing again. That should do the trick. Make sure you have adb drivers installed.
I downloaded the android sdk and sdk manager. Online it says there should be usb drivers but mine doesn't have the drivers. I installed all the packages and there is nothing for usb drivers. Can you or someone send me those drivers or give me a link to where i can get them for the evo? I keep getting usb errors.
Have you tried installing HTC Sync?
No I haven't. I looked it up and it syncs outlook etc. What will that do? I installed the drivers and adb and the computer still gives usb errors. It says the device connected has malfunctioned when it isn't plugged in. It's driving me nuts.
I'm pretty sure that HTC Sync installs USB drivers to help facilitate the various syncing things it does. At worst it won't make any difference, at best it might solve the problem. Can't really see a reason to not try it.
I tried it. Uninstalled and reinstalled and still getting usb errors. Any other suggestions? When I unplug my laptop sometimes i get the blue screen because of a problem with a bugcode usb driver.
I'm having a similar problem but my phone wont even with Vista on my laptop. I have downloaded HTC sync, and Android SDK, did a combo of USB settings in phone and still no luck. All my phone does it charge..how can i get it to disk?
wings9130 said:
I tried it. Uninstalled and reinstalled and still getting usb errors. Any other suggestions? When I unplug my laptop sometimes i get the blue screen because of a problem with a bugcode usb driver.
Click to expand...
Click to collapse
Doesn't matter what version of Windows you're running, go to device mangler, and uninstall ALL of your USB drivers while online. Re-boot, and it should re-install the correct drivers from the internet. My USB drivers were dated 2006, before I did this! And that was in Windows 7!

S4 not recognized when plugged in via USB

The device acts as if it is being charged.
Steps I have taken so far:
-uninstalled T-mo Samsung mobile drivers and reinstalled
-deleted (uninstalled) ALL recognized USB devices via USB deview
-tried to connect without Samsung drivers installed and all USB devices uninstalled
-tried to connect with Samsung drivers installed and all USB devices uninstalled
-tried to connect without Samsung drivers and other devices installed
-tried to connect using safe mode, both with drivers installed and not
---**these are both trying with the current one provided on Samsung's site (1.5.14.0) and with the one found here on XDA from 25apr2013 (1.5.23.0)
-tried to connect using different USB ports
-tried to connect using a different USB port on a different USB controller altogether
The kicker:
Device is recognized instantly... on my laptop.
This means:
-It is not the USB cable I am using (even though I have tried 3 different cables altogether regardless, including the one that came with the phone)
-It is not the device itself
Possible: Windows issue? Last time this happened was long ago when I had gotten a MyTouch 3G Slide. I eventually just reinstalled Windows since I had been meaning to then. I don't want to do it now though because I have too many things installed on here to start a fresh install... but I suppose if nothing else works, that's what I'll have to do.
Before that though, I would love to hear any other suggestions from anyone here.
Some time the fault cud be the cable itself... I had same issue months ago my original samsung UsB cables didn't worked... It olwyz show the msg UsB not recognized... Then I tried with a different UsB cable (i had a Nokia UsB cable) and it worked...
Try it...
Cheers!!!
Sent from battery killer Jellybean GT-I9100 :-\
rjsmer said:
Some time the fault cud be the cable itself... I had same issue months ago my original samsung UsB cables didn't worked... It olwyz show the msg UsB not recognized... Then I tried with a different UsB cable (i had a Nokia UsB cable) and it worked...
Try it...
Cheers!!!
Sent from battery killer Jellybean GT-I9100 :-\
Click to expand...
Click to collapse
As stated, I have tried to use two other USB cables aside from just the one that came in the package.
Since all cables work on the laptop, but not this computer, I have pretty much singled it out to be a windows or a driver issue. :\
What are the specs of your desktop and the specs of your laptop? You claim it is a windows issue so I assume your laptop (that recognizes the phone) is not windows? Do you have Kies on the PC? If so, try to uninstall it completely and then install the individual drivers. Also, maybe just try updating Kies. You wouldn't need to install it, just download to your PC should work. As far as that goes, does Kies recognize the phone when plugged in at all? Does ODIN recognize the phone when plugged in? Maybe some of this will help you to find out if it is a driver issue or not. Good luck.
scott14719 said:
What are the specs of your desktop and the specs of your laptop? You claim it is a windows issue so I assume your laptop (that recognizes the phone) is not windows? Do you have Kies on the PC? If so, try to uninstall it completely and then install the individual drivers. Also, maybe just try updating Kies. You wouldn't need to install it, just download to your PC should work. As far as that goes, does Kies recognize the phone when plugged in at all? Does ODIN recognize the phone when plugged in? Maybe some of this will help you to find out if it is a driver issue or not. Good luck.
Click to expand...
Click to collapse
PC is i7 920, 12GB DDR3, Intel x58
Laptop is i5 2430M, 6GB DDR3, Sandy Bridge
Both are Win7 Pro, neither have Kies (I always just downloaded the drivers themselves) but I'm downloading it now to give it a try. As of now, nothing recognizes the phone on PC.
Kies method didn't work either
I did "Troubleshoot connection error", which I guess reinstalled the driver, but it still didn't work.
Getting ready to dig out that Win7 Pro CD at this point... :\
Shuurei said:
Kies method didn't work either
I did "Troubleshoot connection error", which I guess reinstalled the driver, but it still didn't work.
Getting ready to dig out that Win7 Pro CD at this point... :\
Click to expand...
Click to collapse
Samsung Kies isn't yet compatible with the sgh-m919. Samsung rep told me soon last night
Have you unlocked developer options yet and checked usb debugging? That might be your problem....
SBERG117 said:
Have you unlocked developer options yet and checked usb debugging? That might be your problem....
Click to expand...
Click to collapse
Enabling dev options and USB debugging was the first thing I did once I turned on the phone. Tried it both with and without, still not recognized either way. Still recognized on laptop.
I've also reinstalled windows altogether, since that fixed my issue last time around, but it's no good this time still. Clean install, formatted. No good. Previous steps from first post also taken, still no good. Tried the PDAnet method as well, no good.
At this point I am wondering if it might be an x58 issue, which would really suck, but it's the only thing I can think of given all the steps I have taken.
Okay... so what's the trick on getting Windows 7 x64 to recognize this device in Download Mode?
I have enabled USB Debugging. Tried several different ports on my Maximus V Extreme motherboard. I have tried using the PDANet drivers. Nothing works.Windows will prompt me with the "Device Driver software was not successfully installed" message. Anyone know a trick?
EDIT: FIGURED IT OUT. The last Android device I owned was the Galaxy S2. Now, back then it was understood that one should avoid Kies like the plague. However, in this case, it solved my problem. It installed all necessary drivers and I was able to communicate with ODIN. Cheers.
x58 issue
luckyduck69 said:
Okay... so what's the trick on getting Windows 7 x64 to recognize this device in Download Mode?
I have enabled USB Debugging. Tried several different ports on my Maximus V Extreme motherboard. I have tried using the PDANet drivers. Nothing works.Windows will prompt me with the "Device Driver software was not successfully installed" message. Anyone know a trick?
EDIT: FIGURED IT OUT. The last Android device I owned was the Galaxy S2. Now, back then it was understood that one should avoid Kies like the plague. However, in this case, it solved my problem. It installed all necessary drivers and I was able to communicate with ODIN. Cheers.
Click to expand...
Click to collapse
I might have pinpointed the issue!
I tried Kies again, uninstalled, reinstalled, updated. No go. I did Kies by air and got a connection! So It's gotta be something with the USB.
Although I thought it was weird, I think it might be an x58 issue, I decided to pursue that anyways.
I found out that USB issues are common with x58 (per this forum: http://www.evga.com/forums/tm.aspx?m=159610 ) and will be trying a fix located here: http://www.evga.com/forums/tm.aspx?m=442244&mpage=1
I'll report back once I try this out. Hopefully it fixes it.
If not, I just ordered another USB 3.0 controller (completely unrelated, it doesn't need to be USB 3.0, just a different controller altogether, but USB 3.0 is backwards compatible anyways. I just needed one for blackmagic) which was PCI-e x1 (still dependent on x58, so it wouldn't have mattered, check diagram on fix link), which I WAS going to install in my PCI-e x1 slot, but that would have not worked! Going to install in a PCI-e x16 and hope for the best.
I'll reply back once I test that out too.
Confirmed x58 and S4/general USB connectivity issues
Shuurei said:
I might have pinpointed the issue!
I tried Kies again, uninstalled, reinstalled, updated. No go. I did Kies by air and got a connection! So It's gotta be something with the USB.
Although I thought it was weird, I think it might be an x58 issue, I decided to pursue that anyways.
I found out that USB issues are common with x58 (per this forum: http://www.evga.com/forums/tm.aspx?m=159610 ) and will be trying a fix located here: http://www.evga.com/forums/tm.aspx?m=442244&mpage=1
I'll report back once I try this out. Hopefully it fixes it.
If not, I just ordered another USB 3.0 controller (completely unrelated, it doesn't need to be USB 3.0, just a different controller altogether, but USB 3.0 is backwards compatible anyways. I just needed one for blackmagic) which was PCI-e x1 (still dependent on x58, so it wouldn't have mattered, check diagram on fix link), which I WAS going to install in my PCI-e x1 slot, but that would have not worked! Going to install in a PCI-e x16 and hope for the best.
I'll reply back once I test that out too.
Click to expand...
Click to collapse
In case anyone was wondering or stumbles upon this later, I have a few updates.
I got the USB controller today and plugged it into the PCI-e x16 slot, plugged in the S4 and it worked completely fine.
I also contacted EVGA about the issue and will get an RMA, so perhaps it's just a faulty unit. However, this seems rather common (refer to previous linked threads) in x58 chips.
I imagine it has something to do with power distribution with the controller, which is why upping the ICH voltage fixes it for some people. The USB controller is powered via 4pin, not dependent on Southbridge. I guess the S4 has higher voltage(?) requirements for it to be recognized. It seems rather strange since my other devices are still recognized, but well, that's what I managed to come up with.
Cheers.
Shuurei said:
In case anyone was wondering or stumbles upon this later, I have a few updates.
I got the USB controller today and plugged it into the PCI-e x16 slot, plugged in the S4 and it worked completely fine.
I also contacted EVGA about the issue and will get an RMA, so perhaps it's just a faulty unit. However, this seems rather common (refer to previous linked threads) in x58 chips.
I imagine it has something to do with power distribution with the controller, which is why upping the ICH voltage fixes it for some people. The USB controller is powered via 4pin, not dependent on Southbridge. I guess the S4 has higher voltage(?) requirements for it to be recognized. It seems rather strange since my other devices are still recognized, but well, that's what I managed to come up with.
Cheers.
Click to expand...
Click to collapse
Here's my craziness.
USB connection was working yesterday. Today, it is not.
I have uninstalled/reinstalled the Samsung Windows drivers/Kies
I have even adjusted my southbridge voltage to 1.2V in my BIOS
Still, no joy.
Curiously, when I boot the phone into download/ODIN mode and connect it, ODIN recognizes the connection. Reboot back into normal mode, and no USB connection is recognized. It is not showing up in my Device Manager as an unrecognized device. It just doesn't know it is there (unless phone is in download mode).
UPDATE: Solved. I had installed this ROM (http://forum.xda-developers.com/showthread.php?t=2261013). Reading back over the thread, it provided instructions for re-enabling the USB recognition of the phone. Had to re-enable the developer options and reset USB debugging. Makes sense now.
HI
I'm facing this issue today, I've tried two different laptops, both have Windows 7 x64 installed. I've tried every USB port on the two machines, I've tried with three different cables, I've downloaded and installed every USB driver there is. no use!
I'm out of options here and I can't think where to look further.
any help please?
shuurei said:
the device acts as if it is being charged.
Steps i have taken so far:
-uninstalled t-mo samsung mobile drivers and reinstalled
-deleted (uninstalled) all recognized usb devices via usb deview
-tried to connect without samsung drivers installed and all usb devices uninstalled
-tried to connect with samsung drivers installed and all usb devices uninstalled
-tried to connect without samsung drivers and other devices installed
-tried to connect using safe mode, both with drivers installed and not
---**these are both trying with the current one provided on samsung's site (1.5.14.0) and with the one found here on xda from 25apr2013 (1.5.23.0)
-tried to connect using different usb ports
-tried to connect using a different usb port on a different usb controller altogether
the kicker:
Device is recognized instantly... On my laptop.
This means:
-it is not the usb cable i am using (even though i have tried 3 different cables altogether regardless, including the one that came with the phone)
-it is not the device itself
possible: Windows issue? Last time this happened was long ago when i had gotten a mytouch 3g slide. I eventually just reinstalled windows since i had been meaning to then. I don't want to do it now though because i have too many things installed on here to start a fresh install... But i suppose if nothing else works, that's what i'll have to do.
Before that though, i would love to hear any other suggestions from anyone here.
Click to expand...
Click to collapse
很想帮你啊 可是英文水平比较拙计
ok so now I'm guessing it is not windows, I tried on another machine with Windows Vista and got the same error.
any thoughts, anyone?
Did a factory reset for the phone
no it works!
don't know why
I just picked up this phone a couple days ago and last night tried to get the USB to work with no luck. I've tried everything I can think of. It does work in PTP mode but not MTP mode. I was able to use odin to on it though, so I was able to root it.
I've tried both in linux and on windows xp. I've never had an issue with any phone on linux and have installed/removed drivers numerous times on XP.
Tried 3 different cables, Factory reset with and without USB installed, tried pretty much everything I could find while googling similar problems (removing old registry entries, installed media player, etc)
I have adb installed on my linux box and even with debugging enabled I can't even get adb to connect to the phone.
Definitely something strange going on. Maybe I'll switch to cm10.1 to see if that makes a difference
I cant get my computer (windows 7) to connect with the phone when the phone is on, and was hoping some one might have found a fix.
This might fix it...
Shuurei said:
The device acts as if it is being charged.
Steps I have taken so far:
-uninstalled T-mo Samsung mobile drivers and reinstalled
-deleted (uninstalled) ALL recognized USB devices via USB deview
-tried to connect without Samsung drivers installed and all USB devices uninstalled
-tried to connect with Samsung drivers installed and all USB devices uninstalled
-tried to connect without Samsung drivers and other devices installed
-tried to connect using safe mode, both with drivers installed and not
---**these are both trying with the current one provided on Samsung's site (1.5.14.0) and with the one found here on XDA from 25apr2013 (1.5.23.0)
-tried to connect using different USB ports
-tried to connect using a different USB port on a different USB controller altogether
The kicker:
Device is recognized instantly... on my laptop.
This means:
-It is not the USB cable I am using (even though I have tried 3 different cables altogether regardless, including the one that came with the phone)
-It is not the device itself
Possible: Windows issue? Last time this happened was long ago when I had gotten a MyTouch 3G Slide. I eventually just reinstalled Windows since I had been meaning to then. I don't want to do it now though because I have too many things installed on here to start a fresh install... but I suppose if nothing else works, that's what I'll have to do.
Before that though, I would love to hear any other suggestions from anyone here.
Click to expand...
Click to collapse
Here's a link with a list of things to try what you may not have tried to fix your problems.
A small number of devices I have worked on have a weird thing, that the first time I plug the cable into the computer, it connects but won't show up on the screen. unplugging the USB cable from the machine for maybe 3 seconds, and reinserting makes the connection work... go figure! :>)
Aloha and Good Luck!
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335

[Q] Still Can't connect to Win7 PC (driver issues?)

Hi there.
I picked up a refurbed Incredible 2 (running 2.3.4) and am trying to get it to connect to PC so I can move files across between the PC and either internal memory and/or microSD cards. I'm having no luck on Windows 7.
I changed the Default Connection Type from Charge Only to Media Sync / Disk Drive / HTC Sync (after installing the HTC Sync software - NOT the HTC Sync Manager, which apparently only supports the newer phones) to no avail. I've tried them all, and they all have the same issue. I've done this both with and without USB debugging checked, and with "Unknown Sources" ("allow installation of non-Market apps") checked. I've also tried uninstalling Sync, installing Sync Manager, trying again (no change), and then reversing it (uninstalling Manager, and reinstalling Sync) - again, no change. Sync does not see the phone while connected and in "HTC Sync" mode via the Default Connection Type (or anything else).
When I plug the phone in to the PC the PC shows a "USB Device not recognized" and sometimes I will get a "Driver did not install successfully" message. Device Manager is showing one Unknown Device with a "!" issue under the USB controllers category I'm assuming is the problem. There is also nothing showing up under the Disk Drives category in my Device Manager other than my hard disk, even though some of the guides I'm looking at say I should have something related to the phone in there.
I've tried connecting it with 2 different USB cables, just in case the one that came with it was not fully functional. I've used the second cable for data transfer in the past, so it should work. No difference.
I've restarted several times, with and without the microSD card installed. I've tried unmounting and remounting the card as well, no difference.
Am I missing some kind of Win7 drivers for the Incredible 2 that are not installed automatically and/or with the HTC Sync install? I've seen some references and links to HTC drivers that are apparently not on the HTC site, but I am very leery of downloading an .EXE from a random website and just installing it to see if it works. I'd think if this was necessary, it would be on the HTC site.
Anyone know what gives here? I can't think of anything else to try.
Am I a complete newb here, or is this potentially an issue with the refurb'ed phone?
Thank you very much for any assistance!
I use the driver linked on the revolutionary.io site (http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe) and I have never had an issue.
Sent from my DInc2...
update
Hi there.
I attempted this, but still no change. Do you know where this installs the drivers to, so I might try to manually point the Device Manager "Unknown Device" to them?
When I try to update the driver via Device Manager, however, it is telling me the following:
"Windows encountered a problem installing the driver software for your device.
windows found driver software for your device but encountered an error while attempting to install it.
'Unknown Device'
Windows has stopped this device because it has reported problems (Code 43)"
Thank you for any further assistance or ideas.
Doesn't matter where you place them but you'll need to go to control panel/system/device manager find the device with the issue and select update driver.... Then it should be recognized
Sent from my HTC Droid Incredible 2 using xda app-developers app
OP - do you have any other USB device drivers for other smartphone(s) installed on your PC? If so, uninstall all of them and reboot it clean.
Assumed that you are running VZW stock software - phone isn't rooted ?
Is your HTC Installer running this version - 3.0.0.007 - that's mine (have it running on W7 Pro and Ultimate on desktop & 2 laptop, no problems for me - I also have it running Win 8.
Uninstall HTC Installer & reboot - without connecting the phone. Turn off firewall & antivirus on your PC temporary, reconnect the phone & follow the prompts to reinstall HTC drivers. Once it's done, disconnect the phone & power down the computer.
Restart the PC and then reconnect the DI2 to it, hopefully - it will recognize the phone and allow you to connect & recognize the mSD card for data transfer, etc.
Please post any specific error messages as you see them. Good luck.
A common cause of "unrecognized USB device" is a bad cable. Try another. Or, try a different USB port on your PC.

My phone doesn't show up internal or external storage when connected to my WIN laptop

Hi..! this is my first thread hope I explained my problem clearly.
Guys I have just installed Lineage OS 13 on myHTC One M8s, when I connect the phone to my laptop it doesn't show up anything, but I have the pop window but there is nothing showing up. I have tried usb dubbing ON and OFF. I have tried switching between MTP,PIP nothing works, please help me out guys..!!
Thanks a Million.
Are you using the original HTC cable? Some cheap cables won't connect by data by USB, but only charge.
Try re-installing HTC Sync (which includes the HTC drivers). Although even without drivers, it should still show up in Windows as an Android device.

Categories

Resources