Related
Any help Pls???
a regular install ??
have u tried installing the arabyising suite from imaginet, regularly... ?
u mentionned previously u would install a w2003se, is such a rom available ?
I'm downloading the Arabizer from Imaginet now and will install it as soon as the download completes, but I doubt it will work properly as it is made for windows mobile 2003 and not 2005.
Unfortunately ther is no such Rom "2003" for Jasjar.... if it were there, it would have been much much faster and reliable.
Regards,
Khaled.
arabizer from jasjar extended rom
u can get the arabizer cabs from the erom of jasjar, i have them i can send them via e mail , i think they r too large to post as attachements here. my email is : [email protected]
salam
dr. mohamed eldardiri
Dear Dr. Dardiri,
Thank you very much for your gr8 support.
I have those cab files which came with my Jasjar, but unfortunately whenever I try to install them with the new test rom they don't work properly and they disturb the whole thing, so I think that there is something which needs to be up-graded in these cab files to make them comply with the new test rom.
I'll try the old araizer from Imaginet web site, who knows?! it may work.
I will post the result here after trying to install it.
My email is [email protected]
Regards,
Khaled El-Feki
Dear Dr. Dardiri,
Thank you very much for your gr8 support.
I have those cab files which came with my Jasjar, but unfortunately whenever I try to install them with the new test rom they don't work properly and they disturb the whole thing, so I think that there is something which needs to be up-graded in these cab files to make them comply with the new test rom.
I'll try the old araizer from Imaginet web site, who knows?! it may work.
I will post the result here after trying to install it.
My email is [email protected]
Regards,
Khaled El-Feki
they worked properly with me
i installed only 3 cabs , successively : the one with 1- acert, 2- acert2 , then 3- Ado , in this order, with no interruption inbetween, then i reset , it worked properly, i didnt use other cabs , as i used third party dictionary and calenders and stuff ... so i only installed the cab of my local provider , so that i be able to use wi-fi, everything is ok now. i installed the old imaginet arabizer , but it didnt work at all , and i hard reset.
one question though , i need to know how to use the arabic hardware keyboard as there s no alt key.
salam
Actually I don't know how to use the hardware Arabic keys, but I will check in the mannual guide and post the way to do it here.
You can use the screen keyboard if you tap on the keyboard on the bottom of the screen and choose and then you tap the drop down list and choose لوحة المفاتيح" then you can use the Arabic screen keyboard.
Actually I don't know how to use the hardware Arabic keys, but I will check in the mannual guide and post the way to do it here.
You can use the screen keyboard if you tap on the keyboard on the bottom of the screen and choose and then you tap the drop down list and choose لوحة المفاتيح" then you can use the Arabic screen keyboard.
Mohammad,
One of our room mates suggested me a solution, I tried it and it worked better than the default Arabizer which comes with the original old rom .
If you're interested to view the solution you can access it from this link:
http://forum.xda-developers.com/viewtopic.php?t=43213
Thanks again for your valuble support.
Regards,
Khaled.
arabic hardware keyboard
hello khalled
i was wandering if the new arabizer suite u installed supported the hardware arabic keyboard, coz i failed to use it using the default cabs. i knew that the shortcut keys are (shift+Sym) but it didnt work ...
salam
Hello Dr. Dardiri,
I installed the Arabizer from Imaginet web site, and I can tell you that it's much better than the one came with the I-mate rom.
But unfortunately I tried the hardware Arabic Keyboard but didn't work with me.
I will report this to the i-mate website support and see the result.
Salam,
Khaled.
You just got your X01HT and would like to use the latest WM6 ROM in English with your Softbank account ?
Here is a quick guide, gathering information that has been exchanged and spread accross many threads on this forum (Searches can be fastidious, I know that well...)
I have been reading this forum a lot, keeping on asking questions to everybody, so it's time I contribute a bit to help by describing step by step how I switched my Japanese WM5 Softbank X01HT to a WM6 English device
This post is target at Gaijins who want an English WM6, but still want to be able to use Japanese with it. For a Japanese MUI or ROM, I guess Asukal will probably publish something
***EDIT: for a 100% Japanese ROM, you can now have it here: http://buzzdev.net/index.php?option...um_query=read,40,30486,30597,page=2#msg-30597 ***
I was first willing to cook a ROM including all these, in order to spare some space on my HERMES. I had already cooked an "intermediary" one when Tadzio issued his method to make a "shrinked" OS ROM that would allow you to use the spare space from the ROM
Since this, no point in adding all these mods in my ROM
First: making flashing safe
Download Hard-SPL-V2 from the great Olipro to avoid bricking your device. Here: http://forum.xda-developers.com/showthread.php?t=296722
Install it
Then, get your ROM.
Download the_passenger ROM shrink version of LVSW 20070320 ROM (More space available) and install it (Read threads about flashing ROMs if you are not familiar with that...)
http://www.megaupload.com/?d=8YJATBPG
Install the Softbank AP Settings for your internet connection. You really WANT that. Big thanks to itamae without whom we'd be stuck on first of April this year... (Or I'd still be using WM5)
http://forum.xda-developers.com/showthread.php?t=298031
Now you need a Registry editor
I am used to PHM Regedit. You can find it there for free:
http://www.phm.lu/Products/PocketPC/RegEdit/
To map properly your Softbank Keyboard, do the following registry modifications:
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 30411 (Hexadecimal base)
[HKEY_CURRENT_USER\keyboard layout\Preload] "Default"= e0010411
[HKEY_CURRENT_USER\keyboard layout\Preload\1] "Default"= e0010411
More details here: http://forum.xda-developers.com/showthread.php?t=286787&highlight=keyboard+x01HT
To allow the video Call key to appear on your phone keypad, modify the registry as follows:
[HKEY_LOCAL_MACHINE\Security\Phone\Skin] Enabled = 1
Optional: getting rid of useless trayapp (It looks nice... but it Slows down the Hermes and you can replace it with better apps)
Delete TrayApp key from [HKEY_LOCAL_MACHINE\init]
Fix the disappearing micro SD (Doesnt really work for mine... But could work for yours...)
[HKLM\System\StorageManager]"PNPUnloadDelay" = dword:8196 (Decimal base)
[HKLM\System\StorageManager]"PNPWaitIODelay" = dword:8196 (Decimal base)
More details here: http://forum.xda-developers.com/showthread.php?t=294324
Now time to have your Hermes speak Japanese
Japanese fonts
Use the excellent work from Asukal, that you can find here:
http://www.asukal.jp/WM5/LetsJapanNo5.zip
I did have a problem with it: once I executed it, I could not sync with my Exchange server (Quite a pain for my push email account...)
Asukal found the solution: edit the registry, and change
[HKEY_LOCAL_MACHINE\Software\Mobem\CE-Star] "MyNLS" = "\windows\wince.nls"
Japanese input
Not using for myself, but these work perfectly (I tried):
http://www.asukal.jp/WM5/BagojsINPUT.zip
*** EDIT
If you prefer a Japanese input without the annoying "Floating bar", ie just the same input way as your original WM5 Softbank ROM, just downlaod and install the "MS IME31 J" link from Asukal's page:
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip
*** /EDIT
Silent mode switch
You're going to be missing the Softbank unique way of switching to silent mode (Only available in Softbank ROM)
The way to go around this is by using Vibra
Details available here: http://forum.xda-developers.com/showthread.php?t=277811&highlight=vibra
Download here: http://forum.xda-developers.com/attachment.php?attachmentid=31657&d=1164714506
MMS
Softbank's MMS System is a pain because it's incompatible with "classic" MMS systems...
You can download Softbank's software... But... it's slow, big, bulky, ugly, etc... If you dont mind missing the emoticons, you should go for MMSLite
Regedit, Look for Arcsoft. Delete all references to Arcsoft (Sometimes need to be done in several times, some entries being in use if you have by mistake launched MMS Composer once since your flash of the OS...)
If you dont do these eletions, MMSLite will actually not install...
Downlaod and install MMSLite
http://forum.xda-developers.com/attachment.php?attachmentid=33982&d=1170599400
It should work perfectly !
I you have enough courage (And ONLY after having installed Hard-SPL 1.11 !!!), you can try flashing your radio
You dont have to... but the latest 1.38 does seem to grant an improved battery life
http://forum.xda-developers.com/showthread.php?t=297925
Now you're done, you have a great phone with a faster OS, more storage space, improved battery life, that works perfectly with Softbank AP, can use Softbank proprietary MMS system, and can read and write Japanese
After, there are lots of other things you can do, like mounting your Extended ROM to gain extra space, Unlock the SIM, etc, etc... But it is not the purpose of this thread. Have fun reading the forum, it is well documented in other threads
Have fun !!
another gaijin
just read yourpost today...im at work and i cant wait to go home and follow each of these steps.
man thanks...this is what some of us gaijins are looking for the past few weeks.
btw,
you mentioned sim unlocking etc...etc...
you mean to say, sim unlocking is done after the wm6 flash? why would some do that before the flash?
Hello,
The only problem when upgrading is the Japanese input. I used sometimes (so I need it), but I I install Japanese input package you told in your post the I have a really annoying floating bat anywhere, and it's really unnoying.
There is no way to have same kind of input in enlish ROM?
sesaru said:
Hello,
The only problem when upgrading is the Japanese input. I used sometimes (so I need it), but I I install Japanese input package you told in your post the I have a really annoying floating bat anywhere, and it's really unnoying.
There is no way to have same kind of input in enlish ROM?
Click to expand...
Click to collapse
Try Asukal's IME package (see bottom of page):
http://asukal.net/blog/?cat=8&paged=3
... it includes the input method from WM5 (or one extremely similar). I'm using it with WM6 Black Edition 1.2 and have had no problems with input so far.
As for other Japanese/Japan-conversion-related issues:
- I found that when the Japanese wince.nls file is loaded, .NET CF programs crash with a 'PlatformNotSupportedException' error.
- With MMSLite installed, I can receive MMS, but not send.
ashikase said:
Try Asukal's IME package (see bottom of page):
http://asukal.net/blog/?cat=8&paged=3
... it includes the input method from WM5 (or one extremely similar). I'm using it with WM6 Black Edition 1.2 and have had no problems with input so far.
As for other Japanese/Japan-conversion-related issues:
- I found that when the Japanese wince.nls file is loaded, .NET CF programs crash with a 'PlatformNotSupportedException' error.
- With MMSLite installed, I can receive MMS, but not send.
Click to expand...
Click to collapse
Does it have the floating bar, like in WM5?
sesaru said:
Does it have the floating bar, like in WM5?
Click to expand...
Click to collapse
No, no floating bar.
It works just like the IME from the Japanese WM5 ROM.
Sugoi!! I'll update now
ashikase said:
No, no floating bar.
It works just like the IME from the Japanese WM5 ROM.
Click to expand...
Click to collapse
Eh! I just install ... There is the floating bar ... (>_<)
Magnificent !
I hope you'll let me be a little off-topic.
I actually installed the Japanese ROM you linked to, it works like a charm, but I have a question to SoftBank users :
I'm going to work in Japan soon (1st of April) but I want to use my Hermes as my primary phone, etc. Is it possible to go to a SoftBank shop and tell them basically "Don't ask me how, but this phone is SoftBank-compatible. Now please register it into the SoftBank network and gimme a standard phone subscription. Thanks".
Meaning how can I register my phone (SIM card ? I looked and they seem to have only outrageously expensive SIM cards on loan for 108円 a day, with no 3G connectivity. Or is it possible to get a standard subscription?)?
Thanks for your help
Yannick
sesaru said:
Eh! I just install ... There is the floating bar ... (>_<)
Click to expand...
Click to collapse
Really? I don't get a floating bar.
Did you try it on a clean installation of WM6, or did you install it after installing the Bagojs IME? Maybe some settings in the registry are causing the bar to appear.
Also, did you set your locale to Japanese in "Control Panel->System->Regional Settings"?
pharoah said:
just read yourpost today...im at work and i cant wait to go home and follow each of these steps.
man thanks...this is what some of us gaijins are looking for the past few weeks.
btw,
you mentioned sim unlocking etc...etc...
you mean to say, sim unlocking is done after the wm6 flash? why would some do that before the flash?
Click to expand...
Click to collapse
Nope, just look for it on the forum. Dont wanna spoil your fun
sesaru said:
Eh! I just install ... There is the floating bar ... (>_<)
Click to expand...
Click to collapse
hi man, following these steps:
- Install LetNo5 (Jp Font)
- Install BajosIME
- Install AkusakIME (on device) not in storage card
It work for me and my friends, perfect !!!
Goodluck!
CutKit said:
hi man, following these steps:
- Install LetNo5 (Jp Font)
- Install BajosIME
- Install AkusakIME (on device) not in storage card
It work for me and my friends, perfect !!!
Goodluck!
Click to expand...
Click to collapse
You shouldn't need to install both BagojsIME and Asukal's IME package, just Asukal's. BagojsIME provides an older version of the MS IME.
Use you own phone with SB
You can pick a ZERO Yen phone to do a new contract with SB. Then change the sime card to your onw phone. Suppose you have a sim-unlock phone.
Cuivienor said:
Magnificent !
I hope you'll let me be a little off-topic.
I actually installed the Japanese ROM you linked to, it works like a charm, but I have a question to SoftBank users :
I'm going to work in Japan soon (1st of April) but I want to use my Hermes as my primary phone, etc. Is it possible to go to a SoftBank shop and tell them basically "Don't ask me how, but this phone is SoftBank-compatible. Now please register it into the SoftBank network and gimme a standard phone subscription. Thanks".
Meaning how can I register my phone (SIM card ? I looked and they seem to have only outrageously expensive SIM cards on loan for 108円 a day, with no 3G connectivity. Or is it possible to get a standard subscription?)?
Thanks for your help
Yannick
Click to expand...
Click to collapse
I didnt have to install anything to get the Manner mode working. I think this is implemented in WMXL. But when i set the phone skin security to 1
my phone pad disappears, turns white. Renders unusable. The only fix for me is to set it back to 0.
This might be due to the carrier setting, it happens immediately after running SB external rom carrier info.
Any ideas?
Alcibiade said:
Then, get your ROM.
Download the_passenger ROM shrink version of LVSW 20070320 ROM (More space available) and install it (Read threads about flashing ROMs if you are not familiar with that...)
http://www.megaupload.com/?d=8YJATBPG
Have fun !!
Click to expand...
Click to collapse
It would be nice if you could upload the above ROM to somewhereelse, I can not download it from megaupload or rapidshare.
Many thanks.
nghihuu said:
It would be nice if you could upload the above ROM to somewhereelse, I can not download it from megaupload or rapidshare.
Many thanks.
Click to expand...
Click to collapse
Just to be very clear the ROM is not mine, it's LVSW's and shrinked by the_passenger
I think there are a few other links where the_passenger has uploaded it:
http://depositfiles.com/files/716306
http://fileho.com/download/d96fc8956370/20070320-RUU-Hermes-WWE-3.23.0.0-OS-only-More-space.rar.html
, including a torrent
http://www.demonoid.com/files/details/1075594/?show_files=&page=1&ref=1174503017#file_list
@s2k7: thanks for the tip I'll do that Thanks again
Alcibiade said:
Nope, just look for it on the forum. Dont wanna spoil your fun
Click to expand...
Click to collapse
Hi Bros, I already upgrated the new version and it is working very well. tks so much for ur contribution! and i would like to ask u a question is it possible to unlock the SIM with WM6 version? tk you in advace.
have a nice working week.
tigerwood said:
Hi Bros, I already upgrated the new version and it is working very well. tks so much for ur contribution! and i would like to ask u a question is it possible to unlock the SIM with WM6 version? tk you in advace.
have a nice working week.
Click to expand...
Click to collapse
Pof has published an unlocker an I think it should work (Havent tried yet since I dotn really need it...)
Hi, all guys,
I have checked this site for a long time to find a Simplified Chinese version ROM. But I'm disppointed every time I logged in.
Is there any one have same idea with me? Same wish for a Simplified Chinese version ROM as me?
Is there any one have done that or work on this? Oh is there any one can provide the procedure and material dumps for this project?
Regards
Frank Bing
I'd like 2 help.
as i know, the only thing we need 2 do is adding mui files into the current rom. then we have it!
but english rom runs faster, so install CE-Star on your device will be a better idea.
franksap said:
Hi, all guys,
I have checked this site for a long time to find a Simplified Chinese version ROM. But I'm disppointed every time I logged in.
Is there any one have same idea with me? Same wish for a Simplified Chinese version ROM as me?
Is there any one have done that or work on this? Oh is there any one can provide the procedure and material dumps for this project?
Regards
Frank Bing
Click to expand...
Click to collapse
http://www.asuspda.net/forum-51-1.html
去看看吧
Pure Chinese
Basically I agree with you! But when you want to do it you may met lots of problems.
The big challenges is you have to find all the files related with Chinese, include so files support IMEs and also some registries.
And the problem with CE-star is you can not search you contact list by Pingyin sequential. And also CE-start does not suport Pen, Brush Pen stensil.
Anyway thanks. If I have time and don't care about cost, I should do it myself. And the file list which support SC can be get by compare the dump of SC and TC of other models of HTC phone like dopod830 or cht9000.
Regards
Frank Bing
hi there
if u wanna search your contact list by chinese, check this out.
PS: after install the pocketcm, place lang.ini in the same directory. run pocketcm, then u will find everything in chinese.
After installed YaHei cab, the system displays Chinese very well.
But in the regional settings, there is no such choise for Chinese. Besides, in the IE, there is no Chinese encoding, so the chinese words cann't be read in IE.
What I want is the English interface + Chinese support, so if the problems i mentioned above can be solved, it will be great to me.
Notice: for trinity all the cooked wm6 rom only!!!!!Simplfied Chinese.
this cab will install a font and a wince.nls file, which makes your chinese contact index in ABC and regional settings including P.R.China. that means you can view chinese website.
the wince.nls is special, only works with hermes and trinity wm6, if you install it into other mobile handset, not too bad but the live messenger will fail.
i made it by myself,and i am sure it will working great.
sorry i have trouble uploading files. it is smaller then limitation,but
Chinese_Plus_P3600.zip:
Upload of file failed.
everytime.
sailer1983 said:
as i know, the only thing we need 2 do is adding mui files into the current rom. then we have it!
but english rom runs faster, so install CE-Star on your device will be a better idea.
Click to expand...
Click to collapse
I agree with you but the keyboard in offical english is conflict with A4 and Meihua.The contact pinyin list problem is so light if you use cele dialing .
jerrywei said:
I agree with you but the keyboard in offical english is conflict with A4 and Meihua.The contact pinyin list problem is so light if you use cele dialing .
Click to expand...
Click to collapse
i have no problem whith A4 input method on my trinity.
Dialer 3G (By Duronmarcel) looks great!!!
jerrywei said:
I agree with you but the keyboard in offical english is conflict with A4 and Meihua.The contact pinyin list problem is so light if you use cele dialing .
Click to expand...
Click to collapse
A4 and meihua won't, i am using them
Pocketcm
Thanks sailer for your software
And kalechen, how big is your file? Could you uploaded it again
My Phone Infor and Problem with network wizard
Trinity Dopod 810 Hongkong WM5 Traditional Chinese with CEstar.
And every time I reset the phone, I got an error message: system does not support your current service provider(46000), you have get update information from device manufacturer. Do you want to select other service provider?
The message is in TC which I translate into English? and 46000 is stand for China Mobile. When I try to select, I can not find the it in the standard list.
Anyway, The phone can be used. But I feel uncomfortable with this non-sense error message.
Is there any way which I can add that record in?
franksap said:
Trinity Dopod 810 Hongkong WM5 Traditional Chinese with CEstar.
And every time I reset the phone, I got an error message: system does not support your current service provider(46000), you have get update information from device manufacturer. Do you want to select other service provider?
The message is in TC which I translate into English? and 46000 is stand for China Mobile. When I try to select, I can not find the it in the standard list.
Anyway, The phone can be used. But I feel uncomfortable with this non-sense error message.
Is there any way which I can add that record in?
Click to expand...
Click to collapse
You can dismiss it for ever, watch your choises carefully.
Here is the Fix for the .Net textbox input issue present in the HTC S630 that affects WLS and Yahoo Go !!!
Soft reset after installing the .cab
Thanks to Vertigo1md1032 at http://www.howardforums.com/showthread.php?postid=10489722#post10489722
Tried but did not work
Hello there,
I installed the Cab (install to: device) on my unlocked X02HT with dopod rom.
Turned the device off and on again but no change.
I am using FuseSP and PocketDOS and still both have this annoying numeric keyboard problem
Or does this hack only fix the Yahoo Go and WLS issues?
On my HTC S630 it fixed the problem I had with Yahoo Go, I really don't know if this fixes other apps (this should fix the input problems in the textboxes in .Net bassed apps, but I haven't tried any other) and if this works with other ROMs apart from HTC's one, I guess is just a matter of testing it.
The instructions that I have from that forum are:
- copy the .cab to your phone
- run the .cab with File Explorer to install it
- restart your phone (or shut it off, then turn it back on)
- it should work after that
It worked!
Hi,
I am using softbank X02HT with Dopod C730 ROM. This fixed the input bug with Yahoo! Go.
Thank you so much for this fix! I'm always grateful to smart ppl that come up with things like this!
Yus
does not work somehow on my x02ht dopod rom
as mentioned before i tried it with my x02ht with dopod rom. i did not try it with yahoo go but with other apps i had this numeric key problem with and there was no change...
funny thing is i can install the .cab file as often as I want to. It looks like it installs fine. And then just for fun if I click the cab again after reboot it installs it again. It does not tell me it is already installed even after installing it for the x-time. Is this normal? I tried to installl to device and storage card. no change.
Cheers
xsl777 said:
Here is the Fix for the .Net textbox input issue present in the HTC S630 that affects WLS and Yahoo Go !!!
Soft reset after installing the .cab
Thanks to Vertigo1md1032 at http://www.howardforums.com/showthread.php?postid=10489722#post10489722
Click to expand...
Click to collapse
It runs on my dopod c730.
How about Gmail mobile? I can input my username there...
anybody can help?
Worked like a glove! Solved problem of the apps that treats letters as shortcurts and dont write!
Thanks a lot
need yahoo go for c730
i need yahoo go for cavalier, is there any link to download this ?
do you really have yahoo go installed on your cavalier ?
where is the link to download ?
i always failed when im trying to install it, always unsuccessfull.
please help me
gimbong said:
do you really have yahoo go installed on your cavalier ?
where is the link to download ?
i always failed when im trying to install it, always unsuccessfull.
please help me
Click to expand...
Click to collapse
Go here: http://forum.xda-developers.com/showthread.php?t=432946 and read how to app unlock your device.
Also these would be very helpful http://forum.xda-developers.com/forumdisplay.php?f=415&nojs=1#goto_forumsearch, http://forum.xda-developers.com/showthread.php?t=298893
Cheers
Hebrew WM6.1/WM6
for Tytn and Jasjam
NEW VERSION!!!!!
Includes:
- Superfast and Superlight.
- No backwards hebrew bug reg. problems.
- No Booting issues (No freezes, dead on wake etc.)
- No Longer based on commercial hebrews.
- Works on Tytn and Jasjam or any hermes with FULL hardware
keyboard support.
made from scratch hence no problems
This version has NO menu or interface translation
just full on hebrew support including
hebrew localization in regional setting.
there is no embedded SIP keyboard (YET) thus there's a keyboard cab with hebrew support also attached but this
is only temporary till the next version is out.
IF YOU USE ANY DEVICE OTHER THAN HERMES:
this version will (probably) work but it will install
a not needed hardware keyboard support
a version without hardware is here:
http://www.4shared.com/file/93234549/e12c7004/Badnimits_Hebrew_nohardkeybrd.html
please test this versions and let me know if theres any unknown issues
this was made after many requests and most of them were taken into consideration
the main plus is that its not pdac eyron or paragon related.
**COMING SOON:**
*Hebrew SIP Keyboard Embedded
*Optional interface translation
*Hebrew Smartdialing
DOWNLOAD HERE:
http://www.4shared.com/file/93238757/56dd0794/Hebrew_by_badnimitsKeyboard.html
if you like my work:
OLDER VERSION:
TyntII, touch Diamond, P560 please go HERE
fixes include:
* NO more device not waking after install
* NO BOOT freeze
* NO contacts\SMS menu not working
* FULL hardware keyboard of tytn/herm support
* Partial Hebrew translation with no menu interruption
* Works on ANY rom and From SDconfig with no problem
ADDED TO THIS VERSION:
*SuperLIGHT minimal installment
*menu control for changing the interface to english
*Auto link in programs
*to save you some time (so your girlfriends stop HATING on me)
added the bcontrol.exe(portable) file which is the language interface
menu file, can work from anywhere(SD too) to change the language
with no install/uninstall of previous version,then file can be removed(or not).
enjoy!
DONT FORGET TO INSTALL 01_Badnimits_crt.cab FIRST!!!
***if u use weather plugin select cities pre-installment
or change interface to english if u want to reselect
02_MAIN.CAB (Press Me)4shared mirror
sorry to disappoint but....
The bug with device not waking up after standby is back in this version - I've hard reset my device with the same ROM the version 2/3 worked on and it made it die... (rip)
I've uninstalled and reinstalled the Heb3.zip version and it worked just fine.
did any of you succeed in making any java emulator work with this hebrew version? doesn't work for me...
i tried this cabs
it doesn't work, it asks to register the version and Hebrew is left to right
i installed first the certificate and then the main cab
i tried the cabs on abusalsa v.27 rom
regards
edward
worked for me but ill recook it 4u and check whats wrong..
its wierd cause i just added the control didnt really change much of it. meanwhile you can use the previous version with the hebcontrol.exe..ANYWAYS im trying to port wm6 hebrew from asus which will work much much better cause this one is based on wm5 .. coming soon..
Thank you so much!
Seriously man... you should put up a donation method. I'd be happy to donate to show appreciation.
I can't wait for the new version... the one based on your old tytn orange rom keeps me from using opera mini..
No need for java anymore - the new skyfire with the local US phone requirement removed KICKS A$$! take your time.... lol
your gratitude is more than enough.. glad u solved the java issue, skyfire is SHIBBY everything works on that little devil..
the rapidshare link has expired
awesome
awesome israelis go go go i need hebrew on wm6.1 everyday u make new version?! ma kore lecha?!!? the latest one link doesnt work. BTW I only tried thus far; heb3.zip version, and the wording is messed up left to right, so internet explorer is spelled backwards in hebrew. I am hoping its all fixed up in this version. I'm english first hebrew as backup (for wife) make a new update!
badnimits said:
DONT FORGET TO INSTALL HEBCRET FIRST!!!
***if u use weather plugin select cities pre-installment
HERE!!
Click to expand...
Click to collapse
what exactly is hebcret?
torahtrance said:
awesome israelis go go go i need hebrew on wm6.1 everyday u make new version?! ma kore lecha?!!? the latest one link doesnt work. BTW I only tried thus far; heb3.zip version, and the wording is messed up left to right, so internet explorer is spelled backwards in hebrew. I am hoping its all fixed up in this version. I'm english first hebrew as backup (for wife) make a new update!
what exactly is hebcret?
Click to expand...
Click to collapse
its a known issue its probably cause your not using tytn
alright well this version is working ok thus far besides that. Toda raba achi!
the link to 02_Main.cab does not work
i get a messege
Error
This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.
This limit is reached.
To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.
all known issues are fixed (tytn users) with a new 4shared link containg a brand new version but since i dont want to confuse anybody just download normally :
here : http://www.4shared.com/file/75520997/637d737d/02_main.html
or
here
any chance the hebrew will work on Touch HD?
thank you
ageva said:
any chance the hebrew will work on Touch HD?
Click to expand...
Click to collapse
badnimits said:
all known issues are fixed (tytn users) with a new 4shared link containg a brand new version but since i dont want to confuse anybody just download normally :
here : http://www.4shared.com/file/75520997/637d737d/02_main.html
or
here
Click to expand...
Click to collapse
thank you for the new link
Guys this sounds Amazing...
One request can someone post screenshots?
And a question, does this work on MDA Compact IV (Touch Diamond)
And doe sit owrk on HTC S740 (non touch screen device)
Thanx in advance
Churchill said:
Guys this sounds Amazing...
One request can someone post screenshots?
And a question, does this work on MDA Compact IV (Touch Diamond)
And doe sit owrk on HTC S740 (non touch screen device)
Thanx in advance
Click to expand...
Click to collapse
TyntII, touch Diamond, P560 go HERE
but since im a nice guy:
http://rapidshare.com/files/151231825/MUI-Diamond-6.1.rar
Badnimits,
Thank you for the link
Does your ultra light version work on Windows mobile 6.1 Standard version ??
Churchill said:
Badnimits,
Thank you for the link
Does your ultra light version work on Windows mobile 6.1 Standard version ??
Click to expand...
Click to collapse
YES it works on any wm6.1 providing u r using tytn/hermes; if it does not match the certifacte store from tytn it will show hebrew backwards same on the original versions from the other threads..
BUT im working on herbew for-all-has-nothing-to-do-with-pdac version
Thanks
Thanks for your help, works great on my TyTN