Related
I am interested in trying out these new WM6 roms. however, I was wondering if anyone knew if easysync pro will work with WM6.
Yes it works without any issues. I am using Easysync since 1.5 weeks on wm6.
bunique said:
Yes it works without any issues. I am using Easysync since 1.5 weeks on wm6.
Click to expand...
Click to collapse
Please - What version are you using?
What version of EasySynch Pro works with Windows Mobile 6?
I'm also interested in using EasySynch Pro to synch my WM6 Device? Bunique, what version of EasySynch Pro are you using?
mine is 4.2.5
Easysync pro works with wm6 since V4.2.2. U have to install to main memory.
trlopes1974 said:
Easysync pro works with wm6 since V4.2.2. U have to install to main memory.
Click to expand...
Click to collapse
I have v 4.2.4 and was unable to install it to my WM6 device. Are you sure about this? The system requirements for 4.2.4 list the following as supported:
Microsoft Pocket PC 2000 / 2002 / 2003 / Microsoft Windows Mobile 5.0 for Pocket PC devices (ActiveSync)
alanchia67: Where did you get 4.2.5? I don't see it listed on IBM's site.
Thanks,
-Brett.
zzoinks said:
I have v 4.2.4 and was unable to install it to my WM6 device. Are you sure about this? The system requirements for 4.2.4 list the following as supported:
Microsoft Pocket PC 2000 / 2002 / 2003 / Microsoft Windows Mobile 5.0 for Pocket PC devices (ActiveSync)
alanchia67: Where did you get 4.2.5? I don't see it listed on IBM's site.
Thanks,
-Brett.
Click to expand...
Click to collapse
1.-I'm quite sure on this.
2.-I got-it under IBM internal site (i'm an IBMer)
3. 4.2.4 should work. just install-it into the main memory and u have do do something (i don't remember what) to allow restricted operation on the PDA, this is a reg-hack or something, search xda and u will find!
ps. 4.2.5 is a fixpack
trlopes1974 said:
1.-I'm quite sure on this.
2.-I got-it under IBM internal site (i'm an IBMer)
3. 4.2.4 should work. just install-it into the main memory and u have do do something (i don't remember what) to allow restricted operation on the PDA, this is a reg-hack or something, search xda and u will find!
Click to expand...
Click to collapse
Thanks for your reply. I found an IBM article outlining 4.2.5 and support for WM6.
Perhaps it was a problem with allowing unsigned apps? I seem to recall a registry hack/cab available to fix that. enable_rapi?
It's a bit of a moot point now since I reverted back to a WM5 rom last night. Maybe I'll try reflashing a WM6 rom and see if i can get it going though a hack...unless of course you'd be willing to send me a copy of 4.2.5, for evaluation purposes.
Thanks!
-Brett.
sorry , can't do that.
Anyway, yes, , its is the unsigned apps problem.
trlopes1974 said:
sorry , can't do that.
Anyway, yes, , its is the unsigned apps problem.
Click to expand...
Click to collapse
First off, thanks for the reply. I hope this isn't in the wrong forum... I found this thread through a search and I was hoping it applied to me. I've got a Wizard (Cingular-branded 8125), but I am using WM6 & Easysync Pro.
I still can't get EasySync 4.2.4 to install. I get a series of errors when it's trying to install the cab:
First, "this program uses a file that is no longer supported please obtain an updated version of the program"
Then "unable to launch \windows\xcpcsyncsvr.exe: error 1411"
Finally, it says that it's installed, but it isn't. And Easysync on the PC reports that it can't connect.
Any ideas?
Thanks,
-Brett.
zzoinks said:
alanchia67: Where did you get 4.2.5? I don't see it listed on IBM's site.
Thanks,
-Brett.
Click to expand...
Click to collapse
I'm a IBMer too.
hi all!
i have my pda asus 632n in Chiniess language, need to change it to english at least. the pda's rom is V03.0616.00 CHS 0804. Red big ammount of forums, but those advices which were found don't fit new rom v.30616. On support.asus.com there are some roms for asus 632, but more older version (v.30607) Tried to hack upgrade tool.exe as some people offered, but nothing solved.
For info: the last rom for such as asus 63x goes with two files Update.cap 38,1 mb and Upgrade Tool.exe 19,5 kb. The last one is a romloader - checks language, version of current pda's rom before upgrade. The solution of upgrade is: format SD to FAT, put files above into root of prepared SD, plug SD into pda, execute upgrade tool.exe
When i do such way without hacking upgrade tool.exe, i'm told as language not match! if i hack upgrade tool.exe, then there is "your version is more older then pda's one" on the screen.
There was the thread in http://www.wormholecreations.com.au/wc/megabbs/forums/thread-view.asp?tid=3969&start=81&posts=99, followed right direction of this topic, but it's holded for now
According to my expirience and words of others there is two ways to solve the problem:
1. Wait until new rom upgrade from asus support for v.30616 (may takes much time)
2. hack upgrade tool.exe to remove notice about version
Anyway, does anybody have expirience in hacking plz help to resolve the problem. I guess there are many people who you would help to!
any news, guys?
Problem solved:
http://oneiros-eidos.nm.ru/index_en.dhtml
There you can find patch, that will fix Upgrade Tool.exe and instructions how to do it with any hex editor, if you like
(tested on A636)
oneiros eidos said:
Problem solved:
http://oneiros-eidos.nm.ru/index_en.dhtml
There you can find patch, that will fix Upgrade Tool.exe and instructions how to do it with any hex editor, if you like
(tested on A636)
Click to expand...
Click to collapse
let me thank you lots!! today i will try, hope everything gonna be alright with my 632N. if the test will pass, you are a hero
weltom said:
if the test will pass
Click to expand...
Click to collapse
If not, just mail me your Upgrade Tool.exe at [email protected] and i'll see what i can do.
P.S. To all others, except weltom:
Hey! STOP SENDING ME ALL YOUR "UPGRADE TOOLS"
Just read the whole topic.
oneiros eidos said:
If not, just mail me your Upgrade Tool.exe at [email protected] and i'll see what i can do.
Click to expand...
Click to collapse
if you have icq number, please send me to [email protected]. I have tried to use patched upgrade tool.exe by your programm and by simple changing hex code, and it both followed me to an error exception. and as it's in CHS language, i couldn't read at least the reason
weltom said:
both followed me to an error exception. and as it's in CHS language, i couldn't read at least the reason
Click to expand...
Click to collapse
Just received your Upgrade Tool.exe by email. It's already pathed ,and it works on my device. Strange?...
I must know, what error do you encounter with. May be you can take a screenshot?
P.S. check your mailbox
oneiros eidos said:
Just received your Upgrade Tool.exe by email. It's already pathed ,and it works on my device. Strange?...
I must know, what error do you encounter with. May be you can take a screenshot?
P.S. check your mailbox
Click to expand...
Click to collapse
There are screenshots of the error exceptions. Please, check the e-mail. If somebody need to see the pics, please tell me, course i can't prepare them to the proper size allowed here in the forum
For all, who might be interested.
weltom's problem now solved, but it was a little tricky
It should be no problem to flash to english from russian or to polish from german, etc, just follow link above.
Erorrs may occure with chineese firmware and may be some other asian ROMs due to different file structure for such ROM-images.
oneiros eidos said:
weltom's problem now solved, but it was a little tricky
Click to expand...
Click to collapse
Let me honestly thank oneiros eidos much for his help!! We have to help each other, that's why ask questions here and we altogether solve problems, or try at least.
Can you make it work with the latest update? The one that upgrades to WM6.
Thank you!
I'm receiving a lot of "can you patch that new upgrade tool"-letters.
Sorry, but, now, when i have already sold my A636... No, i can't.
Without device, i can't test my assumptions about "may be that way it will work", so i stopped trying to do anything with new "upgrade tool" utils.
Also, Asus have changed some things in their "upgrade tool", so old methods became useless.
The only thing, that i may advice to all, who really wants to patch that new upgrade tool, is to get latest version of IDA (Interactive Disassembler) and try to do it by yourself (or, may be, some of your frinends, who more skilled in such things).
P.S. As another option for some devices: first flash it from WM5 to WM5 with desired language, then flash to WM6. The only problem here is to find that old WM5 firmware.
Thanks for your reply to this forum Oneiros.
I've just downloaded IDA Pro v.5 and will try to dissassemble the latest Upgrade Tool by myself. I used to do lots of disassembling on PC platform, but never on XScale ARM platform. I just pray it is not that different from the one I know.
I will post my findings here...
Also guys, if you have links to old WM5 firmwares for A632, 636 and especially 639 (the model I have) if you could post them here, that would be greatly appreciated.
Best Regards,
Sasovics
Folks,
I managed to download IDA Pro v5 and I was able to disassemble the old Upgrade Tool (for WM5) and I got the the same offsets as "oneiros eidos" mentioned on his web page, and manage to change the instructions to bypass the mentioned checks, but unfortunately I am not able to disassemble the new Upgrade Tool.exe. Either Asus has protected their file in some way or my disassembler doesn't do the job for this file.
If anybody has a suggestion, let me know.
Best Regards,
Sasovics
Little something about language check in new "upgrade tools".
If you look at disassembled executable, you'll see two interesting registry paths:
HKLM\nls\SystemLCID
HKLM\nls\DefaultLCID
I assume, that if you change both of them them to 1033 (english) with any hex editor, (may be Resco Explorer registry plug-in), and then try to flash, it may work.
Don't forget to write down the old value and restore it, if i'm not right.
Hi all
I tried to modify the registry values with Resco Explorer plugin, changed them to 1033 and restarted the PDA. It doesn't work. This is the message I see : "Open Upgrade image file Error".
Tested on A636N.
Greets.
Hi again
In fact, it partially works. You don't have to reset your PDA or the values you've just modified will be restored. Files have to be placed at the root of the SD card.
Then, when I launch the updater, I see a progress bar and my pda is reseted and restored to factory defaults
So it just reset your device but didn't upgrade to WM6?
Yes it does. I launch the updater, then I briefly see a page with a progression bar and it resets to factory defaults.
pitou74 said:
Yes it does. I launch the updater, then I briefly see a page with a progression bar and it resets to factory defaults.
Click to expand...
Click to collapse
On my PDA it`s the same problem!
Hello!
I can't remmber the name of the program that I had in WM5 (official update) that allow me record my voice as a command to execute a program or call someone...I'm not sure if I installed it manualy or it came with the update.
I just tryed MS Voice Command but its not what I was looking for..
can someone help me find this or simular program for WM6?
Thank you.
[email protected] said:
Hello!
I can't remmber the name of the program that I had in WM5 (official update) that allow me record my voice as a command to execute a program or call someone...I'm not sure if I installed it manualy or it came with the update.
I just tryed MS Voice Command but its not what I was looking for..
can someone help me find this or simular program for WM6?
Thank you.
Click to expand...
Click to collapse
if you have a AT&T 8525 aka Herm100 you should have a program installed already, you press a Button and you say john doe or something and it calls....
Correct, and that's what I had when installed the official update.
Now, since AT&T doesn't provide us with WM6 version I'm trying out one of the ROM's from this forum.
Hope someone can give me some info on that program or something simular..
Perhaps there is a way to extract that program from the update package?
Thanks.
[email protected] said:
Correct, and that's what I had when installed the official update.
Now, since AT&T doesn't provide us with WM6 version I'm trying out one of the ROM's from this forum.
Hope someone can give me some info on that program or something simular..
Perhaps there is a way to extract that program from the update package?
Thanks.
Click to expand...
Click to collapse
Hey do a search for this as I can not find the link right now. Should be what you want
WM_VI_Black_Cyberon_Voice_Commander
Works for me, and also opens apps & prog.
GB
Can someone upload the CAB file? Without redirecting me to the Adobe website and Rapidshare (in others, please use the file attachment on this forum)
I am asking this because I cannot download it from my phone's Internet Explorer, cause when I go to the Adobe website to try to download it, it comes up with some sort of messed up code or something....really frustrating.
When I try to download it from rapidshare the download just says "Wait 0.8 minutes" and it just stays like that.
I am also asking for you to upload the CAB here because I do not of ActiveSync on my computer, and I do not have the administrator privileges it requires for me to download it. I have USER privileges not admin privileges.
Thanks, much appreciated.
It OEM version, registration is not necessary.
Hmmmm, it installs on my WM6 Dell Axim X51v (Football A03RTM) and puts a shortcut in the programs folder, but it won't run and gives me some crap message about being unsigned or missing components
Would I be correct in assuming that it was simply not meant to be used with my device?
It for HTC devices, as well works on mine ASUS P525.
As to DELL - I do not know.
========================
Pay attention, the files are more than 2 mb do not play, it is lack of the program.
Thank you so much Alex. I really think it's a pleasure to have people like you around, cause some people don't even bother to look at my threads.
Wish I could do something for you, like donate, but I'm just a kid, i dunno what to do
Dell Axim was manufactured by HTC for Dell. I guess this is different than most of the other HTC devices. Though several of the Apps ripped out of the HTC touch ROM worked for me.
I have come to the conclusion that this is not compatible with my Ax.
Oh well, worth a try.
I don't know if this is a different version, or not -- but you're free to try it and see.
Hi i Have the HTC s620 AKA (T-Mobile DASH)
and i can run the program itself but when i try to run flash pages from the Iexplorer program on the phone itself i get an error reading
:::FLASH LITE CAN ONLY PLAY BACK FLASH FILES THAT ARE CREATED FOR MOBILE DEVICES:::
I'm not sure why it wont play the video? Are there different flash files that are made to be compatible with the windows mobile 6 OS. I've run 3 different versions of flash lite even the ones on this forum but not sure if they will ever work to support videos via the web on my phone. any ideas?
Kevin1a said:
Dell Axim was manufactured by HTC for Dell. I guess this is different than most of the other HTC devices. Though several of the Apps ripped out of the HTC touch ROM worked for me.
I have come to the conclusion that this is not compatible with my Ax.
Oh well, worth a try.
Click to expand...
Click to collapse
Care to list the one's that did? ty ahead of time
cube v2.1 cannot install
hi all,
i am using Samsung Omnia which is running WM 6.1.
I tried to download and install Cube v2.1 software but when i press to install, the error messge shows "An unspecified error occured". the title of that error msg box is "Zip Mobile".
how can i solve that problem?
THX
Thanks Buddy.... I Was Looking For (adobe Flash Lite 2.1) For Such A Long Time........ Finally I Got It.
Giving more informations
It's working well on my o 2 eXEC, thanks because I'm looking for this a long time .
cj
It worked in the moto Q.
Is there an new version for WM6.1 out there?
Or the one on the first post fits to 6.1
Thanks
flash
alexx.... thanks for file, works great!!
download skyfire browser it has it all.
I have a problem. Each time I try to press a button in some flash animation, Flash Lite shoots up error that I have not enough memory and flash animation closes. I have tried it immediately after hard reseting and still the same. The flash animation is created by me in Flash MX Professional 2004 and it is exported fot Flash Player 7.
Device: Touch HD
Any suggestions or alternative programes?
Thanks a lot.
For WM6 it should be used Adobe Flash Lite 3.1:
http://download.macromedia.com/pub/labs/distributableplayer/distributableplayer_flashlite_wm6_en.zip
Thanks very much for the file share "arpcpro"
Hey I've just install WM6 on my HTC P3300 and the GPS stopped working at all and navigation software doesn't even know that there is internal GPS what can I do ? (I dont reall care if I have to downgrade to WM5 just tell me HOW) Thank You guys !!!
dor515 said:
Hey I've just install WM6 on my HTC P3300 and the GPS stopped working at all and navigation software doesn't even know that there is internal GPS what can I do ? (I dont reall care if I have to downgrade to WM5 just tell me HOW) Thank You guys !!!
Click to expand...
Click to collapse
Hi! tell us more about: - which country did you buy your P3300
- which ROM did you install
I have WM6 and Ibought it on the US
dor515 said:
I have WM6 and Ibought it on the US
Click to expand...
Click to collapse
Ok did you read the howto flash a ROM on ARTEMIS?
If yes you probably saw a line that told you to flash twice your P3300.
It often resolve flashing problems. GPS usually use COM4
You can test with free GPS software or with Navio software.
COM Ports
I may be wrong but I seem to have a vague recollection that in the US, the original ROMs use COM9 for GPS (can anyone confirm?). Flashing to a new rom will have changed this to COM4 so you may just need to reconfigure your GPS settings in the individual applications.
Hey thank you for a quick response but i followed the rulles how to install and its still not working after many times please i you can send me a link with the Windows mobile 5 so i will try to reinstall the original WM that came with the phone thanks anyway
dor515 said:
Hey thank you for a quick response but i followed the rulles how to install and its still not working after many times please i you can send me a link with the Windows mobile 5 so i will try to reinstall the original WM that came with the phone thanks anyway
Click to expand...
Click to collapse
Official HTC WWE WM6 SHOULD work with any P3300, that couln't be yours that is not possible to run GPS part.
There is an ARTEMIS or HTC P3300 model that have no GPS inside ? or I've just misinterpret what you said maybe you can give me a link with a refresh WM5 software the will surely work with mine ?
dor515 said:
There is an ARTEMIS or HTC P3300 model that have no GPS inside ? or I've just misinterpret what you said maybe you can give me a link with a refresh WM5 software the will surely work with mine ?
Click to expand...
Click to collapse
No, All HTC P3300 have got a GPS inside (it remember M$ pub ) only some P3300 haven't got Wifi inside.
You should forget about WM5. I said that I am pretty sure WM6 should work with your GPS.
I can give you a WM5 but it is French orange switzerland version
Was your Wm6 an original HTC WWE version?
NO its a custom something (I dont know) but for sure not an original one please if you can send me link off and World wide English official HTC manufacturing version and i would install it ASAP
Try this...
Start -> Settings -> System Tab -> Clock & Alarms
On Time tab, make sure your time AND time zone is set correctly
Start -> Settings -> System Tab -> Regional Settings
On Region tab, make sure your region is set correctly
Start -> Settings -> System Tab -> External GPS
On Program tab, make note of GPS Program Port
Download & Install VisualGPSce
http://www.visualgps.net/VisualGPSce/VisualGPSceInstall.CAB
Run Visual GPSce
Go to Connect -> Serial port
Set Port to that in "External GPS" setting above and Click OK
If the red dot in the bottom right flashes then your GPS is ok! You may just have to wait for a lock (look for QuickGPS too).
dor515 said:
NO its a custom something (I dont know) but for sure not an original one please if you can send me link off and World wide English official HTC manufacturing version and i would install it ASAP
Click to expand...
Click to collapse
Hi! Download from this link I found on XDA ARTEMIS Wiki
http://rapidshare.com/files/60087606/HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe
PS: Link of the XDA ARTEMIS Wiki : http://wiki.xda-developers.com/index.php?pagename=HTC_Artemis
Tell us if it is working after this HTC WWE release.
Hey about the GPS solution its not working it says "could not initialize communication buffer size" than when i press OK another windows pops up and says "Unable to open port please close the application accessing thecommuinication port" and i press OK and nofting change can you help me with that .... thanking you in advance!!!
dor515 said:
Hey about the GPS solution its not working it says "could not initialize communication buffer size" than when i press OK another windows pops up and says "Unable to open port please close the application accessing thecommuinication port" and i press OK and nofting change can you help me with that .... thanking you in advance!!!
Click to expand...
Click to collapse
Did you reinstall the official ROM version?
Hey when I try to install the ROM WWE after I press the update button it sends me in a white screen and than he gives me ERROR 260 means cant connect with the device what should I do
p.s. by the way my operation system is Vista so just let you know if there is any kind off significance to the subject
Darren.
When I try to install it without memory card he gives me new error after 2 percent says ''INVALID MODEL ID" this utility can't be use on your PDA ... bla bla bla ... !!! you have any king of advice hint or any kind off something helpful
Try hard reset
First you can try to hard reset your device (pressing the 2 soft key and reset at the same time) You will get a message, press the green phone button. If this does not resolve your problem... you can read first post in the forum, to learn how to flash a new ROM. Does your gps ever worked ?
dor515 said:
When I try to install it without memory card he gives me new error after 2 percent says ''INVALID MODEL ID" this utility can't be use on your PDA ... bla bla bla ... !!! you have any king of advice hint or any kind off something helpful
Click to expand...
Click to collapse
Ok, the best thing to do is to CID unlock your device (I thaught you already done that)
Read this Thread carefully it will explain why!http://forum.xda-developers.com/showthread.php?t=308242
Then use only this to CID unlock your device : http://rapidshare.com/files/119852558/Artemis_USPL.rar.html
After that reinstall the original HTC WWE ROM.
Your problems are from flashing from vista, there are a lot of threads about this, but basically you have to piss about untill you have found out how to install a bunch of old xp drivers and then no more 260 errors. When you have done that you can tell us all here just how you did it and post the drivers again because they are getting harder and harder to find.
uniqueboy said:
Your problems are from flashing from vista, there are a lot of threads about this, but basically you have to piss about untill you have found out how to install a bunch of old xp drivers and then no more 260 errors. When you have done that you can tell us all here just how you did it and post the drivers again because they are getting harder and harder to find.
Click to expand...
Click to collapse
Uniqueboy you are too funny...but the easiest way is SDCARD flashing...have a look at XDA-Artemis-Wiki http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing