First, I tried searching and couldn't find anything or just missed it.
When I upload videos to YouTube it will keep timing out and saying that it will retry in one minute. I also found that if my screen turns off while it's doing that, it sometimes won't continue. Anyone else have this issue or have a way to fix it? I have to keep the screen on by sliding my finger down the screen and having to click the uploading video to get it to retry.
No one?
gd,mgfn,gms
Is this the Q&A forum or just the Q forum? Maybe someone will answer that.
I just want to know if anyone else has that issue and if anyone has an idea to alleviate it.
I don't have 4g but I think it may have happened a few times to me on 3g. I usually prefer to stay on wifi, especially if you are uploading something and the 4g signal goes out for a split second, it could end the data transfer.
Sorry I cant help!
elegantai said:
I don't have 4g but I think it may have happened a few times to me on 3g. I usually prefer to stay on wifi, especially if you are uploading something and the 4g signal goes out for a split second, it could end the data transfer.
Sorry I cant help!
Click to expand...
Click to collapse
Hi, thanks for answering. I have great 4g service where I live and usually have 2 to 3 bars all of the time. I was thinking maybe it would time-out a lot for some reason. But, thanks again.
Never
I still have never been able to upload a video on any network 3/4g or wifi. It always times out. Maybe it's an unpublished bug(won't be the first)
evoxsin said:
I still have never been able to upload a video on any network 3/4g or wifi. It always times out. Maybe it's an unpublished bug(won't be the first)
Click to expand...
Click to collapse
Hm. I wish someone would chime in that has done the 4g time-out hack to see if they have the same issue.
Related
I was wondering if anyone else has this issue. I think most people know by now the issue we all ran into with 4G after we flashed roms with the new OTA update. The 4G would just be stuck at "scanning...." and never connect.
Anyways, I did manage to fix the 4G issue using bigbiff's steps here. So now the 4G connects with no issues but there's one problem: when I leave 4G area or go indoors and come back into 4G area it won't reconnect by itself. I have to either turn on and off 4G or hit the "Scan" button.
If anyone can give me any insight or ideas as to what's going on that would be very awesome.
I have the same problem, and I have seen at least one other person mention this problem (it's kind of hard to search the forum for this problem, since all you get are the folks having problems connecting to 4G).
This started after the OTA update. If the 4G signal fades out, the 4G status remains in "scanning" even in known 4G areas. I made one 4G change to try and fix this - I changed the wimax_idle_sleep time from 10 to 300 as was recommended in the 4G problem posts.
I am wondering if anyone knows what the other 4G settings do and if any of them would fix the problem. So far the only way I know to reconnect to 4G is to turn the radio off and on.
I posted this in another forum, the more frequented one. I thought it was more applicable there since this might be an issue concerning rooting, custom ROMs, home ROM flashing, or all the above. Until I see a wave of non-rooted users complaining about this, I think Sprint has found a gotcha for rooters and flashers. Input from some ROM developers would be nice if they happen to visit this forum.
I can enter a 4g area, turn on 4g, and connect. When I leave a 4g area, turn off 4g, then turn 4g back on before re-entering 4g area and enter a 4g area, it is stuck scanning. It never attaches to the 4g network in the area I entered. If I turn 4g off and on while in 4g area, it will connect.
Are unrooted stock users having these problems? It is a real let down and PITA. Is 4g working perfectly in all scenarios for any rooted user?
Click to expand...
Click to collapse
I also think it's related to one of the images we have to flash to get root, as the behavior is definitely different than stock. I noticed this after I first rooted / nand unlocked my phone, but before I applied the new radio & wimax. On my phone, however, 4G does eventually come back up. It might take 5 minutes or more, but it does eventually reconnect.
I'm not sure that it's really a bug though. I actually prefer this behavior because it results in fewer dropped connections when switching between 3G and 4G. For streaming apps (Rhapsody, Pandora, Youtube, etc) the frequent switching forces you to have to start the stream over. I think it might have been an attempt to increase the stability of the data connection at the expense of having a 4G connection less of the time. Could be a hold over from one of the older engineering builds we had to flash during the rooting process? It's strange that the behavior persists after flashing a new radio/wimax, but maybe it's actually controlled elsewhere.
Add me to the list. This is from my post about 20 hours ago which hasn't received any bites:
I have seen various issues reported:
1) 4g won't turn on. PERIOD.
2) 4g turns on but only scans - never connects.
3) 3g/4g alternate so there is never a stable connection.
4) 4g turns on and connects but after a while disconnects and won't reconnect until it is toggled on/off with the widget or check box in settings.
I used to have #3 until I did whitslack's "start over" method and now I have #4. I've changed my wimax idle sleep time to 300 in ##data# and verified a good MAC so other than the 2 evo last resort method I think I've tried everything other than the above.
So, does anyone know if renaming/moving macaddress.tree.xml is for my issue #4? Or does anyone know a specific fix for #4?
If it matters I rooted with toast 1/2 and am still on the rooted stock ROM from whitslack's "start over" method.
Click to expand...
Click to collapse
Some Observations:
I've noticed the following differences since the OTA (with Root-from the "How to Start over with 1.47.651.1" thread):
1. The 4G reconnection problem.
2. Bluetooth no longer auto connects when my headset is in range.
3. I have been getting "Error 67 Data Connection Lost" errors. This error blocks me from 3G data connectivity for a few minutes. During this time, "Mobile Networks" shows "Turning On" in the settings.
I suspect it is one of the following:
a. There is still a radio problem with the rooted OTA
b. the PRI that has not been updated since the root crack matters with this release.
c. Sprint/HTC introduced some new bugs.
d. Some hardware settings need to be tweaked (like the timeout that folks are changing from 10 to 300).
So we need to figure out who is having this problem, and under what circumstances.
I did however note something very interesting. I have repeated this 4 times today. If the 4G disconnects and stays in scanning, if you then place a call it will immediately reconnect. This leads me to believe that it is indeed a setting, and a voice call triggers it (if you recall in May, Sprint was saying that they hope to have Simultaneous Voice and 4G - so there is probably some code to trigger 4G at this point).
What do you folks think.
sw99 said:
Some Observations:
I've noticed the following differences since the OTA (with Root-from the "How to Start over with 1.47.651.1" thread):
1. The 4G reconnection problem.
2. Bluetooth no longer auto connects when my headset is in range.
3. I have been getting "Error 67 Data Connection Lost" errors. This error blocks me from 3G data connectivity for a few minutes. During this time, "Mobile Networks" shows "Turning On" in the settings.
I suspect it is one of the following:
a. There is still a radio problem with the rooted OTA
b. the PRI that has not been updated since the root crack matters with this release.
c. Sprint/HTC introduced some new bugs.
d. Some hardware settings need to be tweaked (like the timeout that folks are changing from 10 to 300).
Click to expand...
Click to collapse
I would take C out because I have not read complaints by non-rooted users.
The latest PRI is 1.40_003. Right?
Who can bring this over? ROM developers say those features are not part of what they do. If not them, then who?
What do you folks think.
Click to expand...
Click to collapse
I think being rooted currently sucks. One of EVO's greatest strengths, connectivity, has been crippled.
sw99, did you try the move the xml file with your mac address solution? If so, I guess it didn't make any difference.
sw99 said:
Some Observations:
I've noticed the following differences since the OTA (with Root-from the "How to Start over with 1.47.651.1" thread):
1. The 4G reconnection problem.
2. Bluetooth no longer auto connects when my headset is in range.
3. I have been getting "Error 67 Data Connection Lost" errors. This error blocks me from 3G data connectivity for a few minutes. During this time, "Mobile Networks" shows "Turning On" in the settings.
I suspect it is one of the following:
a. There is still a radio problem with the rooted OTA
b. the PRI that has not been updated since the root crack matters with this release.
c. Sprint/HTC introduced some new bugs.
d. Some hardware settings need to be tweaked (like the timeout that folks are changing from 10 to 300).
So we need to figure out who is having this problem, and under what circumstances.
I did however note something very interesting. I have repeated this 4 times today. If the 4G disconnects and stays in scanning, if you then place a call it will immediately reconnect. This leads me to believe that it is indeed a setting, and a voice call triggers it (if you recall in May, Sprint was saying that they hope to have Simultaneous Voice and 4G - so there is probably some code to trigger 4G at this point).
What do you folks think.
Click to expand...
Click to collapse
I will try making a call tomorrow when this happens and report back.
I had the same problem pre-root.
I wont be able to help anybody too much with technical stuff 'cause I'm basically a non-technical guy, but I've had the same problem with wimax dropping & not reconnecting ever since the OTA update (1.47....). I went to a Sprint store & the guy just went cross eyed, so it may not be too common.
In my case the connection will SOMETIMES come back on its own with a really strong signal, but rarely.
I just rooted tonight so I have no idea if it's worse or not, but I'll find out tomorrow, eh?
I've also had difficulty with Bluetooth automatically connecting, but I have a new stereo so I don't know where the issue lies.
Burt Reynolds said:
I wont be able to help anybody too much with technical stuff 'cause I'm basically a non-technical guy, but I've had the same problem with wimax dropping & not reconnecting ever since the OTA update (1.47....). I went to a Sprint store & the guy just went cross eyed, so it may not be too common.
In my case the connection will SOMETIMES come back on its own with a really strong signal, but rarely.
I just rooted tonight so I have no idea if it's worse or not, but I'll find out tomorrow, eh?
I've also had difficulty with Bluetooth automatically connecting, but I have a new stereo so I don't know where the issue lies.
Click to expand...
Click to collapse
Interesting. So this may have nothing to do with rooting.
kamiller42 said:
sw99, did you try the move the xml file with your mac address solution? If so, I guess it didn't make any difference.
Click to expand...
Click to collapse
Nope. Didn't touch the xml file, as my 4G was connecting, and the fix was for 4G just scanning.
I still think we can tweak the WIMAX settings and make it come back faster.
sw99 said:
Nope. Didn't touch the xml file, as my 4G was connecting, and the fix was for 4G just scanning.
I still think we can tweak the WIMAX settings and make it come back faster.
Click to expand...
Click to collapse
This is basically the only thing I haven't tried.
I tried making a call to reconnect to 4g three times this morning. IT WORKED ALL THREE TIMES! Odd....
sdc177 said:
This is basically the only thing I haven't tried.
I tried the making a call to reconnect to 4g three times this morning. IT WORKED ALL THREE TIMES! Odd....
Click to expand...
Click to collapse
Well at least its faster than toggling the 4G radio - just find a friend with a mobile phone so you don't waste any minutes.
sw99 said:
Well at least its faster than toggling the 4G radio - just find a friend with a mobile phone so you don't waste any minutes.
Click to expand...
Click to collapse
Just dial your own number which takes you to voice mail and shouldn't waste minutes. I'll probably put a direct dial shortcut on my home screen until a solution comes along. Not that I'm worried about wasting my regular minutes....I used 29 of 450 on my last bill!
I can now confirm that moving/deleting the xml file does nothing for our problem. At least not on my EVO.
So, I've been looking at the WIMAX settings (using ##DATA# and my MSL).
There are some settings that look like they could be effecting this problem. Be forewarned, however, that some of the values preset are not considered "valid" when you make a change (leading me to add credence to my theory that HTC/Sprint goofed), so I'm hoping a nandroid backup will recover them. Open each parameter and deleting the values, gives you a popup of the valid values and units.
Here is what I tried so far:
wimax_idle_sleep(s) changed from 10 to 300 seconds - effect: little to none.
wimax_scan_attempt_timeout(s) changed from 1 to 20 seconds - effect: little to none. (note only 5-300 are valid values after this change).
Other parameters that look interesting and their default values:
Wimax_scan_retry(s): 300 Seconds
Wimax_entry_delays(s): 300 seconds
wimax_exit_delay(s): 2 seconds
idle_mode_timer: 60 seconds
Standby Time: 10 Minutes
handoff Threshold: 6
Anyone willing to mess with these (at the risk of losing Wimax, of course)?
That is one place I'm not going to mess around. I saw a stern warning about that recently on the dev forum.
sdc177 said:
Interesting. So this may have nothing to do with rooting.
Click to expand...
Click to collapse
I still have my doubts about that. I put a link in the General forum to this thread, and we have one response. I read around the non-tech sites with 4G forums like SprintUsers, and I don't see these complaints.
I would like to hear from a tech oriented non-rooted user.
sdc177 said:
That is one place I'm not going to mess around. I saw a stern warning about that recently on the dev forum.
Click to expand...
Click to collapse
I'm hoping someone who knows what the settings mean can shed some light. I have not had any luck googling any of these fields.
kamiller42 said:
I still have my doubts about that. I put a link in the General forum to this thread, and we have one response. I read around the non-tech sites with 4G forums like SprintUsers, and I don't see these complaints.
I would like to hear from a tech oriented non-rooted user.
Click to expand...
Click to collapse
I did see a couple of non-root complaints, but I can't find them now (not on your standard sites).
My phone sometimes loses signal completely... other times it has a signal but I cannot connect to the net. The 3G Symbol at the top only shows that it is uploading and not downloading. any Ideas on how i can fix this?
Mrakulis said:
My phone sometimes loses signal completely... other times it has a signal but I cannot connect to the net. The 3G Symbol at the top only shows that it is uploading and not downloading. any Ideas on how i can fix this?
Click to expand...
Click to collapse
The radio is very flaky, I believe even more so for CDMA devices. What type of phone do you have?
I get the same thing here. Almost 1 out of every 3 times coming out of sleep it is ok. Otherwise I have to go and rebuild the APN settings back to default.
Typically it has something listed but once in a while it lists nothing until I rebuild them.
These times seems like it is like the towers have stopped talking or refuse connection to my phone. Thus the reason why it uploads but not downloading any data.
2.1 had random data issues but 2.2 has some major kink either with the radio version or overall CDMA.
I have Verizon (RHOD500).
arrrghhh said:
The radio is very flaky, I believe even more so for CDMA devices. What type of phone do you have?
Click to expand...
Click to collapse
I believe it's the (Touch pro2) Rhodium 100. but not really sure how to check. But if you mean GSM or CDMA.. Its GSM
Mrakulis said:
I believe it's the (Touch pro2) Rhodium 100. but not really sure how to check. But if you mean GSM or CDMA.. Its GSM
Click to expand...
Click to collapse
you can try re-flashing the radio, which will help if anything has been corrupted
I would try that if my WinMo has an issue. So far just android dropping data on my RHOD500.
I think it is trying to rebuild or at least re-register on the network too much causing issues with towers or internally at least.
noodles21o2 said:
you can try re-flashing the radio, which will help if anything has been corrupted
Click to expand...
Click to collapse
I dnt have a problem in WM. Only within Android.
Yea... the radio drivers probably aren't perfect. Far from it, from the sound of things... I've definitely had issues with it as well. I just try to avoid making calls in Android, and receiving them always makes me leery. I've had a few important calls drop because Android decided to reboot itself...
Ahh yeah I've seen the same problems on my RHOD500...usually I know when facebook gets a refresh API error since its set to sync every hour so I just pop on/off airplane mode for a minute and I get data back.
Other then that radio seems pretty decent...I make and receive calls all day with no issues.
//Sent from my Neopeek-Froyorider RC2 using XDA App
i have been having the same issue is there a fix for it?
I'm in Southern California and technically 4g is not live so I dont know if that's the issue, but I'm able to connect to 4g and do a speed test..
But when I go to the youtube app, it says "sorry, cannot load this video" or something like that... Does anyone else have this issue?
Now that I think of it I probably should have tested it through the regular browser and not just the youtube app... I'll try that next time in the 4g area and report back.
Anyone else experience this or have any ideas why it doesn't work on 4g? When I turn off 4g and go to 3g it loads the same videos fine.
Just bumping this thread to the top. anyone?
Yea it happens every now and then. 4g is not fully functional yet, I think they limit certain thing they are routing.
Wait until they officially turn it on, then you can complain to sprint about it if it still happens.
I see times when I will have full 4g signal and cannot do anything data related. I am connected to the tower, but the tower is not connected to anything.
awesome, that makes sense and I was kind of thinking that. Just wanted to confirm if anyone else has seen that at all.
Thanks mate!
hello forum..i been having a problem getting 3G on my evo i dont know what else to do i been looking online for fixes and no success so far (obviously) sometimes i get 3G for a few minutes other times it shows 3G but its greyed out but most of the time theres just no service at all...i am in a 3G area i can connect to 4G but very little (not really in my area) and i connect to wifi...im rooted but im on the stock sense rom till i figure this out..i called sprint and did a few resets but it didnt last after i hung up (of course) ...please help..any information would be appreciated
p.s. let me know if you need anymore info
Well, are you in an area where Sprint's 3g network is overloaded [therefore slow]?
The switches at the towers are set to send phones to 1x [to reduce the load] in times where it's necessary.
That sounds like it's what's happening to you.
Especially since you sometimes get 3g.
i wish it was but the other evos in this house have full 3g -__- im hoping perhaps theres a way to refresh or restart my 3g if thats even possible?
I don't how much help this would be but if you call Sprint they can send refresh signals to your phone. Maybe try that? Edit: Not sure if these are the resets your talking about.
Sent from my PC36100 using XDA App
beezo23 said:
i wish it was but the other evos in this house have full 3g -__- im hoping perhaps theres a way to refresh or restart my 3g if thats even possible?
Click to expand...
Click to collapse
You can turn the radio off and on via settings > wireless & networks > mobile networks > data enabled
It's important to note that, just because other phones are getting 3g and you're only sometimes getting it, it could still be the switches at the tower.
You can try updating your radio to the newest version.
http://forum.xda-developers.com/showthread.php?t=715485
Or wiping and reflashing/ruu your rom/kernel.
Sprint could also completely reset your line [on their end] and cause the phone to re-provision.
thank you i will definitely try this ...but how do i flash the radio? in recovery?
beezo23 said:
thank you i will definitely try this ...but how do i flash the radio? in recovery?
Click to expand...
Click to collapse
That is correct.
does it mean anything if i flashed the radio and it started loading and went to the main recovery part like like where it says reboot, install from sd, ect?
beezo23 said:
does it mean anything if i flashed the radio and it started loading and went to the main recovery part like like where it says reboot, install from sd, ect?
Click to expand...
Click to collapse
It just prepared it.
Now you have to restart the phone and it will go to a screen and you have to sit and wait for it to finish.
DO NOT TAKE THE BATTERY OUT.
It can take a few.
''/ still no luck...but thank you
Still need help...btw my battery is shot could this possibly be a culprit? my battery does last more then 3-4 hours
Ok, this is driving me nuts. Maybe someone has some additional ideas on what I could try out.
First of all, I am on Verizon in the SE Michigan area. At work I hover around 2-3bars 4G/full bars 3G. The same thing at my home. I am rooted and w/ 4.0.4.
I have tried the 4.0.4 radios, the hybrid 2 and hybrid 3 radios. For all of them I get similar behavior.
I would say almost half of the time when I request data (try to open a website, etc...) or if I try to place a call I get a total connection drop even though a stable connection (either 3g or 4g) is indicated. Call won't complete and/or data won't work - no bars and a little gray x. This is when I have a completely fine connection, it just seems to crap out when I request either data or a call. After about 30 seconds or so the connections automatically resets itself and it appears to be fine. Occasionally i need to restart my phone.
I've been getting this with 4.0.3 non rooted and 4.0.4 rooted with all the above radios. it's a massive pain in the ass. I had no such issues with my DInc and my gf has no such issues with her Razr.
Any ideas?
I would say you have bad signal, despite what your signal bars may show. No amount of data drops will stop a call from being completed unless it is a complete loss of signal.
The other possibility is something is causing the ril to crash. However without you supplying a logcat, there is no way to be sure.
So, do you think this may be a hardware problem? I am getting "no connection" when I try to make calls in areas where no one else appears to be having issues. Do I need to throw my phone against a wall and use my insurance for a new one?
Ok, ill run logcat and post when it happens again.
Sorry for borrowing your thread, but I also seem to face signal drops and don't know if it's because of carrier breakdowns or something else. I have the XXLA2 radio and run the latest AOKP.
My logcat is attached, if anyone wants to help me.
Theshawty said:
Sorry for borrowing your thread, but I also seem to face signal drops and don't know if it's because of carrier breakdowns or something else. I have the XXLA2 radio and run the latest AOKP.
My logcat is attached, if anyone wants to help me.
Click to expand...
Click to collapse
It wont be related, because this poster is on Verizon.
I believe I found my issue...i'm certainly not the only one...
Issue 24345 "Samsung Galaxy Nexus (CDMA/LTE) radio drops all data and voice"
(I cant post links yet)
mrthemike said:
I believe I found my issue...i'm certainly not the only one...
Issue 24345 "Samsung Galaxy Nexus (CDMA/LTE) radio drops all data and voice"
(I cant post links yet)
Click to expand...
Click to collapse
Does it happen to you on 4.0.2? You only mentioned 4.0.3 and 4.0.4 (the report is for 4.0.2).
adrynalyne said:
It wont be related, because this poster is on Verizon.
Click to expand...
Click to collapse
Ah, alrighty then.
Theshawty said:
Ah, alrighty then.
Click to expand...
Click to collapse
If you are on 4.0.4, it is a known issue for GSM users.
adrynalyne said:
Does it happen to you on 4.0.2? You only mentioned 4.0.3 and 4.0.4 (the report is for 4.0.2).
Click to expand...
Click to collapse
I haven't tried 4.0.2. I could try that, but i'm confident it will happen with those as well. The symptoms described in that report mirror exactly what happens with mine.
I did three speedtests with my phone, on the third one I lost data and voice. Tried to make a call and got a "Mobile network not available". Almost like something is completely crashing voice/data.
adrynalyne said:
If you are on 4.0.4, it is a known issue for GSM users.
Click to expand...
Click to collapse
A closer inspection has led me to believe that I do not have this error on the ROM I use, so I'm sorry for possibly wasting your time.
Thanks for the RIL crash suggestion adrynalyne, I requested a replacement phone as it appears that is the only fix.