So guys I've read every instruction carefully, and decided to install unsigned HardSPL on my Diamond.
What happened was that by the time I clicked 'yes' to run enterbootloader.exe on the phone, the PC has already displayed some error message about not being able to reach the phone, with an 'exit' button as the only possibility.
My phone is now hooked up to the PC, displays a black screen (with backlight on), but it seems that none of the processes related to HardSPL are running on my PC. Its been well past 10 minutes.
What do I do? Simply unplug the thing and push the reset button? Or has harm already been done? I truly hope not, since my PC hasnt uploaded a bit of data to the phone.
Well I got impatient and just pushed the damn reset button and it seems everything is in working order. Did I soil my pants. Anyway I think I'm gonna give up flashing as I see lots of people on here who followed instructions yet bricked their phones.
Hi Caius
Help can sometimes take a while before being answered.
Don't expect someone to answer your question within 10 minutes and then just drop the entire issue.
Now, one of the things I'm nissing in your story, is did you hook up with active sync?
and which file did you use to flash your phone?
otherwise, if you don't feel comfortable flashing your phone, don't.
your phone should be fun to have, and not be stress related.
(although I remember the rush I had the first time I flashed, fun fun fun)
If you look at the edit time, you can see it wasn't 10 minutes but 30
Anyway, yes I did hook up with active sync. Nevertheless, I'm not even sure if my phone is a CDMA or GSM one - I've heard that if I have a SIM card its gotta be GSM, but wikipedia says CDMA phones use a CSIM as well :S
A few months ago I dropped my dash and cracked the screen, it still worked, could still dial, could still recieve calls.. just couldent see anything.
I ordered a G1 and in the closed the Dash went.
Well, no I need to add a 2nd line to my account, and I need a 2nd phone.
So I figured I would order a new screen for the dash and just use it. Being prudent I decided to first make sure it still worked, I put it on a charger and the light came on showing it was charging.. ok, good deal..
I let it charge a while, popped in my sim, and powered it on, figured I would make a test call and such.
Well the screen lights up solid white (no suprise.. its broke) and after a few seconds.. the phone just starts beeping the alarm tone.. then it starts beeping it again over top the first.. and again and again untill there is this cacophony of racket, I have to pull the battery to stop it.
it worked fine (aside from the screen) when I "retired" it, but now it just freaks out.
I tried hooking it up to the computer, the light one the phone comes on, but thats it, the PC doesent see the phone.
Obviousley Im rather nervous about the idea of buying a new screen and going through the trouble of installing it on a phone, that best I can tell.. is totally screwed up..
any ideas on what I should do?
P.S. I can post a video of the insanity if that will help.
Have you tried the first natural response when things go wrong "a Hard-Reset" ?
Ok, i tried a hard reset, best I can tell it worked (no visual cues)
it no longer does the funky chicken on start up, but it doesent do anything else either.
I put my sim in it, let it boot up, tried calling it from another line and it just went straight to voicemail.
and if u conect to the pc, anything happen?
2ndly, try removing the battery, put it back then hold camera button and whilst still holdin it press the power button, wait for some 3 seconds then release em and then coonect to pc, check in device manager if anything shows up....
updates......
Check in comm manager if the phone is on or if in flightmode etc.. If not next step is to re-flash stock and see if the problem still persists?
keep in mind the screen is broken, i cant see anything.
Wingnutt said:
keep in mind the screen is broken, i cant see anything.
Click to expand...
Click to collapse
lol can't mem reading that but if can get sync then MyMobiler will let you see the screen
try what i said above and lets us know if u see something like windows ce smartphone in device manger
Okay so here is the deal. I just picked this sweet Epic up and started rooting it and I can't get it connected to the pc to get into the files. I set the phone to debugging, and even tried it with it off as well, then I connected the usb (and yes I tried alt cords too) to the pc and selected mass storage (I tried charging too). The pc says it's installing the drivers and even says completed and ready to use but on my computer screen it only shows my hard drive . I downloaded the starter sdk and tried those drivers as well. Even though I could not get it to recognize I started Odin and while phone was on it showed 2 ports, but once I turned the phone off and set it to download mode I get zero, zip, nada for ports available. Now I did see somewhere to set the code back to PDA and top to Modem so I did that as well. Still no luck. I am running stock Froyo EC05 2.2.1 and 2.6.32.9 kernel. Can someone please help me out? I had a Moment before this and never this many issues. Is there a way to just put the card in a reader and install the files and then put it back in my phone and run recovery from there? I've never had to do that before so I was wondering if it's an option if I can't fix this. Last thing is the charging time is way long and the hold isn't lasting long either. I'm no expert or developer, but I'm flashed many ROMs on my moment so I guess you can say I know a little. Please no tech jargon/lingo though to prevent unnecessary communication issues. Suggestions on GB ROMs would be nice too. I tried RandomKing but the links were no good. I hate the stock garbage on there and would love it if someone could help me get them off so I can continue with my rooting agenda.
Try with USB debugging on, connect to the computer then go into control panel and device manager, find phone entry, probably samsung android, then hit update drivers from Windows Update. Takes a while to load all drivers, sometimes more than 30 minutes. Then reboot computer and phone and try it.
As for ROMs they are ALL good. Read the description of each to find out what's in it and if you like it, try it.
Sent from my SPH-D700 using XDA App
Thanks for the reply. I tried that (unknown device) but I just keep getting windows has decided your driver is the best message when I even disabled, re-enabled, removed and re-installed all drivers. It's really bugging me and I'm not one to give up but I spent over 6 hours on this last night and I'm stumped. BTW what 2.3 ROMs do you know of that are stable with the least issues? Just suggestions of course as everyone has their own style...
Stick to the EG22 ROMs since EH06 and EH17 caused many phones to random reboot. After a few days EH17 started disconnected my calls. I have been using a ROM not listed on XDA. It is Bonsai B14 EG22 based. You can google Bonsai Android or click my signature. There are a few good ones in the development section here too.
Sounds like it is definitely a driver issue. There are samsung drivers floating around here. If you don't find a working set I will hunt them down tonight for you.
Sent from my SPH-D700 using XDA App
You can try the drivers in the first post of this thread:
http://forum.xda-developers.com/showthread.php?t=1052813
Thanks...
Cool I will try that out when I get home since work computers are usb restricted
Thanks for all your help and I'll update you tomorrow.
By the way I was playing a HD game on it today while charging and I got a charging paused, battery too hot or cold... Is this a problem with the EG22 build?
Another thing to make sure of is if your dial ##8778# it will bring up a menu, make sure your device is on pda.. believe it or not this helps some people
* PDA should be selcted under the USB Section.. the other section should be on modem
Sent from my old but still kickin Epic 4g
Yeah that's what I was talking about that I tried.
Now I did see somewhere to set the code back to PDA and top to Modem so I did that as well.
Click to expand...
Click to collapse
rooted!!!
Got Odin working and downloading now... Had to sneek my laptop into work to get her done but... LOL... Now time to get rooting!!!
Thanx guys... Will let you know what ROM I went with later today...
Working on putting on 2.3.4 EG22 v. Alpha "Hawk" [Journaled] EG22 AIO Volume/Hotspot/Lockscreen/Overscroll/Lag Fix but the download is taking over 2 hrs!
Phone isd not working at all now...
I put it through Odin and was following the prompts on the odin page that said to put victory_8G_100528.pit in pit and the tar in, hit start it went through and said something about partition and then the phone shut off and never came back on. It won't even charge now... NO life at all.
Fixed...
Okay I took the battery and sd card out, and then plugged the usb in while holding 1 & power down. That put it into download mode. From there I just put the battery and card back in and installed clockwork. BTW the only cord that would work was the one that came with the phone. Took me 12 hr to figure that one out because all the forums said to not use it. UGH
Thanks for all the help.
Also watch out for launchers that hide you notification bar, this can bork USB/sdcard detection, I just made a tip thread.
smartbeatz said:
Okay I took the battery and sd card out, and then plugged the usb in while holding 1 & power down. That put it into download mode. From there I just put the battery and card back in and installed clockwork. BTW the only cord that would work was the one that came with the phone. Took me 12 hr to figure that one out because all the forums said to not use it. UGH
Thanks for all the help.
Click to expand...
Click to collapse
There is a manufacturers cord that is the same connector but doesn't work, not sure which one but I use my old Palm Pre cable and a lot of others use Blackberry cables.
Oh so nice
Okay the new ROM is running great and is oh so sexy, fast and powerful, although I do not like the home page dock layout. I see no issues yet and I'm switching back to the Epic today after I beef up my old moment (which I had swapped to for the day because I thought I soft bricked the Epic beyond recovery) I promised to my mom. I'd like to find a stable GB build for her too but it doesn't look like the programmers have figured that one out yet.
BTW the cord I have is the one that looks a little weird on the end you plug into the phone and seems to be real stiff. I got more phones to mess with so thanks all...
Anyone know of any good tutorial sites that teaches how to develop and write codes? Flashing is one thing but getting to know the nuts and bolts to help others out is where I want to be.
Ok, first off I chose Sprint because I believe that Boost Mobile is on the sprint network, but my phone doesn't specifically say sprint on it or anything, so I had no clue which of these device boards to post into. This is the exact page I got it on, if that helps. [link deleted - paranoid forum rules] - I will post specs of the device in a minute.
Alright, the issue with my phone, is that after I used a car charger 2 months after I got my phone, it suddenly stopped being able to connect to ANY computer ever again. I suspected it was PDA net at first cause that was the newest change I had done to my phone. So, a few days later, I could find now way whatsoever to fix it, and had to factory reset. This fixed my phone just fine.
Two months later, I was fed up with having battery issues all the time, this phone drains battery faster than my laptop, and its battery is 3.8 years old! I got an external battery that holds 20,000 mAh/74 Wh (Practically the same as my laptop battery too. ) that is from the LimeFuel company. I know that before I used it, my phone worked with my laptop just fine. I don't plug my phone in to my laptop all that often, especially now that I have a battery to use with it. However, I download large files on my phone with 4G to put onto my laptop because my home net is crappy, so a week after, I noticed that my phone lost the ability to communicate with computers, again. I then realized, it had to be the connections. The first time it happened was when I used a car charger, the second time, an external battery. Each time, my phone suddenly inexplicably lost the ability to communicate with a computer ever again. It can only see devices as a power source, nothing more. There's no missing software or drivers, it just doesn't register as anything to my computer. Like a power toggle so it can't tell the computer "Hey, I'm a device that you can transfer data with".
One more note; The first time this happened, I had activated developer options but had them turned off. I mean that I used USB Debugging mode once and turned all of that off. The second time, I hadn't even unhid the option yet, unhid after my phone broke again to try and fix but nope.
I did research on trying to fix it, without factory reset because a factory reset is USELESS, if it's going to happen every single time I use anything but the wall to charge it, right?
There was a topic online claiming that there is a menu under "Storage" in the settings. There isn't. It was a big fat lie. Or Android devs deleted it.
There was another topic, claiming that USB settings would be under some wireless and networks area. Nope.
Now, I remember that when my device would connect to the computer, it would let me change it from MTP to PTP, but after this happened, nothing. It doesn't even pop up anymore, nor does it ask. There is no where in the phone that these options even exist at all. It's like Android devs deleted access to these options for no reason whatsoever.
Another bit in that topic mentioned ‘USB Mass Storage’, which also doesn't exist. Here's the topic with everything I tried, if I'm allowed to give links at all. If not, well not my fault. Topics used to try and diagnose and fix issues, but failed;
[link deleted - paranoid forum rules]
[link deleted - paranoid forum rules]
(There were more but I can't remember them all, it's more or less the same as the two above)
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Translation: "To prevent spam, we want to hinder only legitimate users by making them post 10 units of spam first before they can get help with their issues by showing exact information and screenshots of their issues or steps taken given by other websites."
So. How do I get my phone to connect to computers again?
Why does it stop accepting data from computers after I use a car charger or an external battery pack?
Why would Google/Android devs choose to intentionally break your phone like this?
Code:
Hardware: L710T.03
Software: L710TVPU0AOA3
Model: SPH-LT10T
Android 4.4.2
Kernal: 3.4.0-1683363 (Ask if need more)
Build: KOT49H.L710TVPU0AOA3
Ask of need more.
VasVadum said:
Ok, first off I chose Sprint because I believe that Boost Mobile is on the sprint network, but my phone doesn't specifically say sprint on it or anything, so I had no clue which of these device boards to post into. This is the exact page I got it on, if that helps. [link deleted - paranoid forum rules] - I will post specs of the device in a minute.
Alright, the issue with my phone, is that after I used a car charger 2 months after I got my phone, it suddenly stopped being able to connect to ANY computer ever again. I suspected it was PDA net at first cause that was the newest change I had done to my phone. So, a few days later, I could find now way whatsoever to fix it, and had to factory reset. This fixed my phone just fine.
Two months later, I was fed up with having battery issues all the time, this phone drains battery faster than my laptop, and its battery is 3.8 years old! I got an external battery that holds 20,000 mAh/74 Wh (Practically the same as my laptop battery too. ) that is from the LimeFuel company. I know that before I used it, my phone worked with my laptop just fine. I don't plug my phone in to my laptop all that often, especially now that I have a battery to use with it. However, I download large files on my phone with 4G to put onto my laptop because my home net is crappy, so a week after, I noticed that my phone lost the ability to communicate with computers, again. I then realized, it had to be the connections. The first time it happened was when I used a car charger, the second time, an external battery. Each time, my phone suddenly inexplicably lost the ability to communicate with a computer ever again. It can only see devices as a power source, nothing more. There's no missing software or drivers, it just doesn't register as anything to my computer. Like a power toggle so it can't tell the computer "Hey, I'm a device that you can transfer data with".
One more note; The first time this happened, I had activated developer options but had them turned off. I mean that I used USB Debugging mode once and turned all of that off. The second time, I hadn't even unhid the option yet, unhid after my phone broke again to try and fix but nope.
I did research on trying to fix it, without factory reset because a factory reset is USELESS, if it's going to happen every single time I use anything but the wall to charge it, right?
There was a topic online claiming that there is a menu under "Storage" in the settings. There isn't. It was a big fat lie. Or Android devs deleted it.
There was another topic, claiming that USB settings would be under some wireless and networks area. Nope.
Now, I remember that when my device would connect to the computer, it would let me change it from MTP to PTP, but after this happened, nothing. It doesn't even pop up anymore, nor does it ask. There is no where in the phone that these options even exist at all. It's like Android devs deleted access to these options for no reason whatsoever.
Another bit in that topic mentioned ‘USB Mass Storage’, which also doesn't exist. Here's the topic with everything I tried, if I'm allowed to give links at all. If not, well not my fault. Topics used to try and diagnose and fix issues, but failed;
[link deleted - paranoid forum rules]
[link deleted - paranoid forum rules]
(There were more but I can't remember them all, it's more or less the same as the two above)
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Translation: "To prevent spam, we want to hinder only legitimate users by making them post 10 units of spam first before they can get help with their issues by showing exact information and screenshots of their issues or steps taken given by other websites."
So. How do I get my phone to connect to computers again?
Why does it stop accepting data from computers after I use a car charger or an external battery pack?
Why would Google/Android devs choose to intentionally break your phone like this?
Code:
Hardware: L710T.03
Software: L710TVPU0AOA3
Model: SPH-LT10T
Android 4.4.2
Kernal: 3.4.0-1683363 (Ask if need more)
Build: KOT49H.L710TVPU0AOA3
Ask of need more.
Click to expand...
Click to collapse
First off, after the factory reset and everything worked did you reinstall the pdanet?
Second, 20,000mah battery? Holy cow im jealous!
Forgive me if you have already tried these things but this is what i would do...
Did you reenable developer options and reenable adb debugging?
Did you uninstall and reinstall your phone drivers?
Is there an updated phone driver?
Have you tried a different usb cord?
Is there excess dirt or dust in usb charge port on your phone?
Does your usb charge port even work anymore or do you just charge external battery on wall?
Have you tried a different usb port on the computer?
Have you tried on another computer?
Have you tried updating computer drivers?
Have you enabled a fast charge tweak like on a kernel tweak app?
If none of these questions fix it then a workaround is downloading app called airdroid. You can wirelessly transfer files from phone to computer and back again without usb cord.
Let me know what worked please! Good luck!
ZipAddict said:
1. First off, after the factory reset and everything worked did you reinstall the pdanet?
2. Second, 20,000mah battery? Holy cow im jealous!
3. Did you reenable developer options and reenable adb debugging?
4. Did you uninstall and reinstall your phone drivers?
5. Is there an updated phone driver?
6. Have you tried a different usb cord?
7. Is there excess dirt or dust in usb charge port on your phone?
8. Does your usb charge port even work anymore or do you just charge external battery on wall?
9. Have you tried a different usb port on the computer?
10. Have you tried on another computer?
11. Have you tried updating computer drivers?
12. Have you enabled a fast charge tweak like on a kernel tweak app?
13. If none of these questions fix it then a workaround is downloading app called airdroid. You can wirelessly transfer files from phone to computer and back again without usb cord.
Click to expand...
Click to collapse
1. No, I never touched PDA net again.
2. Too bad forum rules say I can't be friendly and give you the link to it.
3. Read the topic you quoted. I did, only after my phone broke again. Except it's not adb debugging, it's USB debugging. Doesn't work, because the phone can't communicate with a computer anymore.
4. 5. 11. Yes I reinstalled drivers and no there were no updates.
6. 7. Nothing's wrong with the cable. I did try with others.
8. What does that even mean? Yes my phone's port works. Nothing's wrong with any hardware.
9. 10. I've tried different ports and different computers.
12. Can't, phone isn't rooted.
13. I'm not using this. My phone is not there for Google/Android to tell me I'm not allowed to use my USB port ever again. I'm also not going to wait 4 hours for a 4 GB file to transfer via my router to my computer nor am I installing some app software to my computer just to have wireless transfer. This is not a work around. This is an "Oh well, it's broken, guess you can't ever use USB ports again for data access!"
note; I tried all of these (except 12/13) before I ever came here looking for help.
2. I will google it
3. I didnt realize toggle to turn on usb debugging didnt work sorry. I just know it needs to be on for the computer to see the phone. This seems to be an area of problem possibly.
8. Lol! What i meant was did the area where u insert charger function properly. Only reason i asked is because some of those batteries charge on wall unit made specifically to charge the battery only not with charge.
12. Doesnt require root for basic settings like changing governor usually. Only to overclock/undervolt, etc.
13. Great answer! But i meant as a temporary fix until someone more experienced with this issue helps you.
I also figured listing all those things would help other people see what you had and hadnt tried before asking you next time. Wish i couldve helped more. Good luck
ZipAddict said:
2. I will google it
3. I didnt realize toggle to turn on usb debugging didnt work sorry. I just know it needs to be on for the computer to see the phone. This seems to be an area of problem possibly.
8. Lol! What i meant was did the area where u insert charger function properly. Only reason i asked is because some of those batteries charge on wall unit made specifically to charge the battery only not with charge.
12. Doesnt require root for basic settings like changing governor usually. Only to overclock/undervolt, etc.
13. Great answer! But i meant as a temporary fix until someone more experienced with this issue helps you.
I also figured listing all those things would help other people see what you had and hadnt tried before asking you next time. Wish i couldve helped more. Good luck
Click to expand...
Click to collapse
2. amazon dot com /External-20000mAh-Limefuel-LP200X-Flashlight/dp/B00OHZVN5U/ - It let me charge my phone 7-8 times fully before it was empty. Automatically stops when your phone is full.
3. USB debugging doesn't need to be on in order for a phone to communicate with a computer. This is only if you want to debug apps or use other developer tools. File transfer works just fine without it.
8. I still don't understand what you mean. My phone is not broken in any way. Nor is my battery. My external battery charges off any USB input, my phone charges off any USB input. My phone just can't communicate data wise between devices anymore via USB.
12. Fast charge isn't going to fix my phone. Unless it disables data communication, then I need to turn it off. All "kernal tweak apps" appear to require root. The top 5 google searches shown this.
3. Wasnt sure. Ive always had it on
8. Some aftermarket batteries dont charge while in phone hooked up to charger. They come out of phone and into specialized charger for battery only not phone with it, so that it can charge the larger battery in a matter ofan hour or so is what i have been trying to say. But its obvious thats not the case for you now since i asked and clarified. If this was the case one might not know that the small usb port on their phone needed cleaning to make a good connection because they literally dont use it to charge their phone. They charge their phone with external battery charger. You see?
12. On my custom rom and on my trickstermod app it does say fast charge disables data communication and that you have to turn it off for computer to recognize phone again. This fast charge mode only works when connected to computer not wall charger it says
Wish i could be more help but im out of ideas. Good luck
Update to the current situation.
My phone is somehow, repaired. But I have no clue why. I did several things today, just screwing around while I backed up my stuff to the SD card. One of them could have fixed it, or my phone is magic and self repairs after a while. Lets list everything I can remember that I did.
1. I typed in *#9900# in my dialing app. Toggled an option called "Low battery dump" to "on".
2. I deleted a whole bunch of files, including hidden files on the internal storage. Probably screwed up my apps but, whatever, it works now.
3. I pulled the SD card out.
Shortly after all these things, I plugged it in for power, and it finally, got my computer to see it as an MTP device again. No clue which of these succeeded. I'm going to wait a small bit before I test the things that tend to break it.
The magic option, is because I tried to root, it broke, stuck in download mode with some error about firmware. For 4 hours it was stuck like this, I tried everything I could think of, which wasn't much, tried installing the ROM back too, after wasting 2 gigs of bandwidth downloading it only to get an error before it even started the install. Phone was still rebooting in download mode error screen. Left it sit there off for like a minute and it just turns it's self back on, flickers a few times and the logo pops up and the device pops on like nothing had ever happened to it. I'm so confused. :/ At least everything's back to normal. Now add a good confusion post icon below so I can click it and post. :|
VasVadum said:
12. Fast charge isn't going to fix my phone. Unless it disables data communication, then I need to turn it off.
Click to expand...
Click to collapse
this was your problem remember? fast charge does disable data communication.
VasVadum said:
Update to the current situation.
My phone is somehow, repaired. But I have no clue why. I did several things today, just screwing around while I backed up my stuff to the SD card. One of them could have fixed it, or my phone is magic and self repairs after a while. Lets list everything I can remember that I did.
1. I typed in *#9900# in my dialing app. Toggled an option called "Low battery dump" to "on".
2. I deleted a whole bunch of files, including hidden files on the internal storage. Probably screwed up my apps but, whatever, it works now.
3. I pulled the SD card out.
Shortly after all these things, I plugged it in for power, and it finally, got my computer to see it as an MTP device again. No clue which of these succeeded. I'm going to wait a small bit before I test the things that tend to break it.
The magic option, is because I tried to root, it broke, stuck in download mode with some error about firmware. For 4 hours it was stuck like this, I tried everything I could think of, which wasn't much, tried installing the ROM back too, after wasting 2 gigs of bandwidth downloading it only to get an error before it even started the install. Phone was still rebooting in download mode error screen. Left it sit there off for like a minute and it just turns it's self back on, flickers a few times and the logo pops up and the device pops on like nothing had ever happened to it. I'm so confused. :/ At least everything's back to normal. Now add a good confusion post icon below so I can click it and post. :|
Click to expand...
Click to collapse
glad whatever you did fixed it lol. have a good day
ZipAddict said:
this was your problem remember? fast charge does disable data communication.
glad whatever you did fixed it lol. have a good day
Click to expand...
Click to collapse
Except, I don't have a fast charge option anywhere. I can't toggle fast charge. My phone is unrooted and locked and such. If plugging in a device like a battery or a car charger, toggles this option and the OS developers deleted access to toggle this option, it is an OS bug and a critical issue in the device that needs to be fixed. I don't know what fixed it, but I'm assuming it was the low battery dump, and that doesn't appear to have anything to do with fast charge and it was a hidden secret option in the system.
VasVadum said:
Except, I don't have a fast charge option anywhere. I can't toggle fast charge. My phone is unrooted and locked and such. If plugging in a device like a battery or a car charger, toggles this option and the OS developers deleted access to toggle this option, it is an OS bug and a critical issue in the device that needs to be fixed. I don't know what fixed it, but I'm assuming it was the low battery dump, and that doesn't appear to have anything to do with fast charge and it was a hidden secret option in the system.
Click to expand...
Click to collapse
The way u said it i misunderstood i thought u did have it on. Its not an option on all roms though. Mine has it and i tried it and couldnt see files thru usb until i toggled it off so it was just an idea. I dont know the effects of the low battery dump off top of my head but i will remember that if i hear someone else with same problem. Glad its fixed now