EDIT: It is now fully working except camera. Stay tuned
EDIT2: CM6 Alpha Preview is available from here
Here is the github repo: http://github.com/loxK/android_device_htc_hero
Here is the issue: http://github.com/loxK/android_device_htc_hero/issues#issue/3
Status:
- wifi ok
- BT ok
- Accelerometer: ok
- Jogball: ok
- HW keys: ok
- Camera: fails
- Touch screen: fails
What about the mic, is it working? Thanks for your help to the hero community. Are you going to return to us?
This happens because some of the libs (HTC + android) are meant to be dl-opened and some are prelinked.
You can always play around with ldd to find which are dynamic and which aren't.
libaudio / libaudioeq / libhardware_legacy tend to cause problems.
Touch screen is now working, was kernel related. But proprietary libs are still not getting linked correctly...
gewoontim said:
What about the mic, is it working?
Click to expand...
Click to collapse
I can send voice commands to the phone witch are recognized.
gewoontim said:
Thanks for your help to the hero community. Are you going to return to us?
Click to expand...
Click to collapse
I do not belong to anyone. I do the work I need for me, or concerning Hero, for my girlfriend needs. I just share it, that is all.
But please do respect the " [dev] " in the thread subject and do not pollute and wait for a release.
Can you give these libs a try?
http://www.multiupload.com/EIPA5SFXAW
I created a full Froyo build with HTC propitiatory drivers.
Let me know if you need anything else.
Feeyo said:
Can you give these libs a try?
http://www.multiupload.com/EIPA5SFXAW
I created a full Froyo build with HTC propitiatory drivers.
Let me know if you need anything else.
Click to expand...
Click to collapse
I tried but same error. So u managed to build/run it from source? Is your vendor or device tree somewhere online ?
after having JIT working on Sense 2.1 (thanks for Feeyo) and having the official 2.1 Froyo is the most important thing - I think
The communities eyes are on you guys C:
Good luck!
Lox_Dev said:
I tried but same error. So u managed to build/run it from source? Is your vendor or device tree somewhere online ?
Click to expand...
Click to collapse
I have build it from source yea and got booted up. Although I am having a lot of issues with FC's. I used the sapphire tree with edits and used the 2.1 Hero proprietary drivers to compile it correctly.
I got struck on that spl thing, but Darchstar have near working froyo for cdma. So there is probably some solution to touchscreen problem at least. Look here:
http://forum.xda-developers.com/showthread.php?t=686893
and here:
http://github.com/darchstar
It is now fully working except camera (didn't sleep for 24 hours now and still awake!).
Stay tuned!
Woah great work! I'm guessing you will release it when you get the camera working?
I will defiantly flash as soon this is out
Cant wait
Lox_Dev said:
It is now fully working except camera (didn't sleep for 24 hours now and still awake!).
Stay tuned!
Click to expand...
Click to collapse
awesome stuff, cant wait to try a froyo build.
Now this shows who's the real "ROM assembler". None of the popular* ROM "developers" have achieved this. Thanks and congrats Lox_Dev!
* I'm referring to those people who are considering themselves experts in ROM "development".
DSF said:
Now this shows who's the real "ROM assembler". None of the popular* ROM "developers" have achieved this. Thanks and congrats Lox_Dev!
* I'm referring to those people who are considering themselves experts in ROM "development".
Click to expand...
Click to collapse
You're right ;-)
DSF said:
Now this shows who's the real "ROM assembler". None of the popular* ROM "developers" have achieved this. Thanks and congrats Lox_Dev!
* I'm referring to those people who are considering themselves experts in ROM "development".
Click to expand...
Click to collapse
in fairness RaduG compiled Cyan 5.0.7 from Source. He's been on holiday since before Froyo sources were released (AND RaduG is 17!)
But definately, Lox is one of the forefront devs to have looked at Hero, along with Paul, MoDaCo who prefers to deal with Sense than Cyan
Im quite looking forward to trying this. Thank you for your hard work!
it doesn´t mind for me if the camera is not working because i do not use it, but only if you can´t solve it, i think that you can release it and then make an update.zip fix for the camera like other devs.
but whitout any hurry, this is only my opinion.
i can´t wait to flash this.
good job man.
It must be fun to know that xda and twitter get hammered by people waiting for a download link . Great effort, Lox. Again you start the route to a great variety of Froyo Roms on our not yet old-fashioned Heroes
Thanks for making your source tree public and let others benefit from your findings. Nice stroke.
Things you might want to test: (you asked on twitter)
- Proximity sensor
- Brightness sensor
- Location searching through WLAN
- Gmail sync
- Full market access
- Alarm clock
- su (root)
BTW: Can't wait to modify my Exchange password policy removal tool to work on Froyo. If you need assistance in testing, let me know
just a question, will we be able to flash it tonight?
Related
Disclaimer: For devs only. Updating to it will wipe your device. I am not responsible of any damage of any sort or data loss or anything.
AOSP-Cupcake 1.0b for HTC Hero.
This project aims at getting the open source android OS to compile and run on HTC Hero. No Rosie or any HTC apps will be ever be added to that rom. Once fully functional, it could be used as a base for cookers.
Current release: 1.0b1
>> Git reposiory
What works:
- place, receive calls
- wifi
What does not do far
- bluetooth
- trackball
- compass & accelerometer
- GPS
- camera
Note: devs please test hack and share if you fix anything or have any idea
Reserved for futur use
great work. Will root my hero and try it out soon. Thanks again!
could you upload the update.zip?
This is verry nice, wil try it later (after the new moto), is it posible that themes for G1 donut working for this to?
jaapschaap said:
This is verry nice, wil try it later (after the new moto), is it posible that themes for G1 donut working for this to?
Click to expand...
Click to collapse
Yep, with this rom it's the same system than the g1.
Poischack said:
Yep, with this rom it's the same system than the g1.
Click to expand...
Click to collapse
so do u mean that if i install this cupcake version then i will be able to install themes made for g1??
I don't think it is that easy, on 1.6 the G1 had 3/4 pretty nice roms but the themes only worked for 1 of them @ the time and each revision of the ROM requered a revision of the theme, even when staying on 1.6 all the time)... So there is more specific stuff in the themes then some png's
@Lox,
will u release an update.zip...?
or is it meant for us to compile it ourselves...?
all quiet on the western front.
Lox, please have our inconditional support. We will all be watching this thread closely.
The rest: please try to keep this thread for use of the developers. Refrain from discussing here.
Please find below the Official HTC 2.1 update for Chungwa Telecom Taiwan (3.31.751.1) in it's various guises repacked to update zip format. An online kitchen is also available for MoDaCo Ad Free or MoDaCo Plus members. A MCR based on this release is in progress.
I note that 42turkeys has already uploaded a rooted repack, but I need to create these for the kitchen anyway...
RECOMMENDED - Rooted with Superuser 2.1 by ChainsDD, insecure boot included, radio image NOT included, Chinese specific functionality (HTC_CIME, Plurk, KKBOX etc.) removed, additional languages, HTC_IME and Busybox added - MD5: e7d08761f201ea3054510b83623eb724
RECOMMENDED - Radio only - for use with the above (note: issues have been reported with Orange UK) - MD5: d2c45b49e76d8826fb50803277b29caf
Rooted with Superuser 2.1 by ChainsDD, insecure boot and radio image included - MD5: 0a6f7cca936c4fc10193532bc99b8cec
Rooted with Superuser 2.1 by ChainsDD, insecure boot and radio image NOT included - MD5: c323bf5689707027cd7f661a94ab7084
Unrooted with insecure boot and radio image included - MD5: 6ef91d52547319b86016e21f6ff99b4e
DOWNLOADS
Enjoy!
P
Nice work Paul, I still beat you to it!
42turkeys said:
Nice work Paul, I still beat you to it!
Click to expand...
Click to collapse
Haha! And i've been waiting for it drop for months, lol!
P
Hi All
Does HTC put Friendstream inside HTC Hero 2.1 rom?
French langage is present inside multi-language? For example in home menu, "Téléphone" instead of "Phone"
Many Thanks
Gibou
ok.... so which one do I use? yours Paul, or roufianos (which certainly sounds interesting), or 42's eclair-update-signed?
and this is likely a really naive question LoL, but I'm guessing these won't overclock?
And if they won't overclock, will it be possible for you amazing people to supply a kernel that CAN overclock any time soon using the actual hero 2.1 official kernel source? or is that going to be unavailable source code for the forseeable future (based on past experience with google/htc)?
One of my current issues with VR6.2.1 is that the camera only works at iso100, making it almost useless for taking pics of kids/dogs/anyone who isn't posing still. I'm hoping that this official rom fixes that. But I'm thinking that maybe using an alternative kernel that can overclock which isn't actually based on the official hero kernel source code but is in fact taken from the Eris (like VR6) might break the camera iso functionality again.
So much boring long crap I'm writing eh? LoL
oh, and most importantly, thanks for being super amazing!
cheers,
Dkelley
No voice search or voice input. Is it possible to add or get this?
Otherwise it's a very good rom, very fast!
dkelley said:
ok.... so which one do I use? yours Paul, or roufianos (which certainly sounds interesting), or 42's eclair-update-signed?
and this is likely a really naive question LoL, but I'm guessing these won't overclock?
And if they won't overclock, will it be possible for you amazing people to supply a kernel that CAN overclock any time soon using the actual hero 2.1 official kernel source? or is that going to be unavailable source code for the forseeable future (based on past experience with google/htc)?
One of my current issues with VR6.2.1 is that the camera only works at iso100, making it almost useless for taking pics of kids/dogs/anyone who isn't posing still. I'm hoping that this official rom fixes that. But I'm thinking that maybe using an alternative kernel that can overclock which isn't actually based on the official hero kernel source code but is in fact taken from the Eris (like VR6) might break the camera iso functionality again.
So much boring long crap I'm writing eh? LoL
oh, and most importantly, thanks for being super amazing!
cheers,
Dkelley
Click to expand...
Click to collapse
Use whichever ROM you want.
SetCPU seems to be overclocking ok, HTC have to release kernel source code as they have modified other open source stuff.
chriscpritchard said:
No voice search or voice input. Is it possible to add or get this?
Otherwise it's a very good rom, very fast!
Click to expand...
Click to collapse
Both of these will be in the 'MCR' version i'm working on.
P
paulobrien said:
Both of these will be in the 'MCR' version i'm working on.
P
Click to expand...
Click to collapse
Cool, thanks, would you also be able to add the news app?
Nice work ! But where's Friendstream ??
42turkeys said:
Use whichever ROM you want.
SetCPU seems to be overclocking ok, HTC have to release kernel source code as they have modified other open source stuff.
Click to expand...
Click to collapse
you should be able to use any 2.6.29 kernel (from other 2.1 roms) or build your own using the leaked kernel sources http://github.com/behnaam/HeRo-2.6.29-GoDmOdE .
Works great for me Hero GSM China Mobile.
Thanks for Sharing !
paulobrien said:
Please find below the Official HTC 2.1 update ..
Enjoy!
P
Click to expand...
Click to collapse
i have a question, will i receive if the official have any other update pack??
Hi ! Thank you for this release ! Flashing right now. I'll use it until the WWE or European version come out.
I still find that the new "shiny" look of the Sense UI is not as good as the previous one
Is there any body using oc kernel? If yes which kernel you using with this rom?
-------------------------------------
Sent via the XDA Tapatalk App
i flashed this and booted it up, and there's a little box in the middle that says "Loading........it make take several minutes to complete, please wait"
its been there for 10 minutes now
should i reboot, or take the battery out ? or just wait ?
berger34 said:
i flashed this and booted it up, and there's a little box in the middle that says "Loading........it make take several minutes to complete, please wait"
its been there for 10 minutes now
should i reboot, or take the battery out ? or just wait ?
Click to expand...
Click to collapse
Wait. It takes ages...
ok thank you
the screen times out after inactivity, and i can't get into settings to turn it off; does that affect the loading at all ?
how can i get mms working on this?
EDIT: fixed didnt set any APN's =_____=
This is a very pre-alpa build of AOKP ROM.Known serious issue are h/w buttons,not all are working correctly,use onscreen ones.More functional update will be very soon
Credits
Goes to everybody working on ICS for hero and heroc
P.S I took updater-script from HeroICS ROM,hope guys wouldn't shot me
http://www.mediafire.com/?2qb7fk2w8dyiibw
:/
ported from where? more details..
1ceb0x said:
:/
ported from where? more details..
Click to expand...
Click to collapse
This one is ported from WFS,now compiling new wersion from sources
not bad few issues\recommendations after installing:
Max speed of 710 is a bit keen (default of 691 ?)
Recommend latest Nova Launcher (1.2 - lots of bug fixes)
SuperSU rather than SuperUser
Remove pointer following boot-up
Updater script saying installing CM 4.0.3 needs edit as 4.0.4 is installed ...
Advise that gapps are not included
Please dont take this as criticism, I certainly couldn't do this (tho i might have a bash somepoint)
I'd be happy to be guinea pig for testing further builds if you'd to pm me.
awesome! glad to see you guys have an aokp port now.
about the hardware buttons, wouldnt that have to do with the /usr folder? try to replace key layout related stuff with ones from heroics, and it should work.
if you need any help let me know
Download link not work correct..and one question if i understand good this is new port from new HTC Desire C ROM....ICS 4.0.4?
Thanks
P.S.Good will be to make your tread with more exact info like ROM version images from phone,change log and e.g
What works and what not?
jogai said:
What works and what not?
Click to expand...
Click to collapse
Hardware buttons except for menu, home and back (correct me if I'm wrong) don't work. However Keynrtracker (or check here for more information and keynrtracker.apk) resolves all the buttons. The problem doesn't seem to rely in /system/usr/keylayouts, but somewhere else.
Haven't had time to try this ROM out any further.
Build now maintained under:
http://forum.xda-developers.com/showthread.php?t=1795990
Hey guys,
I've just managed to make a build of Cyanogenmod with lots of help by a guy called sultanqasim (actually he did most of the work), thanks a lot bro
Probably it's very bugy. Let's call it Pre-Alpha. Anyway, the build is ready and I need guys who'd like to try it out.
I chase GDrive for the first CM build. All Beanstalk builds are uploaded to the official Beanstalk AFH.
Currently working:
Display
WiFi
Bluetooth
Sensors
Audio through bluetooth
NFC
Broken:
Audio through built in speakers or headphones
RIL
Camera
Mic
Various other smaller things
Some Sprint users also report that it doesn't work for them. Just try it out if you like. Every tester's report takes the project a bit closer to stable builds.
Download Cyanogenmod (GDrive)
Download Beanstalk (AndroidFilehost)
To flash it:
in TWRP, reformat the userdata partition as unencrypted ext4. Go to Wipe->Advanced Wipe, select data, click on repair or change filesystem, change file system, and choose ext4.
in TWRP, go to Wipe -> Advanced wipe, and erase system, data, dalvik, and cache
flash the file by pushing it to your sdcard or you can use adb sideload. Also you can flash GApps optionally.
reboot into the system
Looking forward to your reviews. Thanks a lot
Good luck to all of you
Remember: I'm not responsible for anything that could happen as a result of following my instructions or anything else.
XDA:DevDB Information
[Testing][ROM] Cyanogenmod 13 - Unofficial, ROM for the HTC 10
Contributors
krassermensch, sultanqasim
Source Code: https://github.com/sultanqasim
ROM OS Version: 6.0.x Marshmallow
Based On: Cyanogenmod
Version Information
Status: Testing
Created 2016-06-10
Last Updated 2016-07-13
If you like my work consider a donation to support me in financing computer-components which are meant to replace the defect ones in my broken PC.
If you donate you'll donate to my father who will gimme the money. Thank you really much!
Nice!
Moderator Information,
Thread re-opened to allow OP to upload file on XDA host.
Can't wait for CM13 on this phone. I know Squid2 has been a ton of work into this, from what I know, already a solid month behind the scenes.
device boots up? display?
thought this thread was closed till a download link was posted...
i don't seem to find any link or me gone blind lolll
edit:- just read that its opened for uploading the link so it seems upload is in progress
Maybe change the title with correct spelling of " Unofficial "
We've had a booting and partially working version of CM13 for a while now, it's posted by @squid2 somewhere in the guides and discussion thread. Which, makes me wonder, with all due respect, how this is any different from that build?Have there been any fixes to the broken things on that ROM (most of the radio, for example) that warrant this being a separate version of CM13?
psych0r3bel said:
We've had a booting and partially working version of CM13 for a while now, it's posted by @squid2 somewhere in the guides and discussion thread. Which, makes me wonder, with all due respect, how this is any different from that build?Have there been any fixes to the broken things on that ROM (most of the radio, for example) that warrant this being a separate version of CM13?
Click to expand...
Click to collapse
i guess we would need to wait for the upload to be finished to see if its any different or the same as the Op doesn't seem to be much of responding to any comments
@krassermensch - Can you give us a list of what is and isn't working in your experience, at least?
psych0r3bel said:
We've had a booting and partially working version of CM13 for a while now, it's posted by @squid2 somewhere in the guides and discussion thread. Which, makes me wonder, with all due respect, how this is any different from that build?Have there been any fixes to the broken things on that ROM (most of the radio, for example) that warrant this being a separate version of CM13?
Click to expand...
Click to collapse
Hey, squid2 is the guy I named sultanqasim in the first post of this thread as sultanqasim is his GitHub name. I managed to build Cyanogenmod with his help and his sources. He's the main developer. I'm just trying to make a more current build for those who'd like to have one. As a result my builds are based on his latest commits. I'm just the one who did minor patches which aren't as relevant as the ones squid2 performed. He's the more experienced one of us. You should treat me like a maintainer and him like the main ROM developer.
krassermensch said:
Hey, squid2 is the guy I named sultanqasim in the first post of this thread as sultanqasim is his GitHub name. I managed to build Cyanogenmod with his help and his sources. He's the main developer. I'm just trying to make a more current build for those who'd like to have one. As a result my builds are based on his latest commits. I'm just the one who did minor patches which aren't as relevant as the ones squid2 performed. He's the more experienced one of us. You should treat me like a maintainer and him like the main ROM developer.
Click to expand...
Click to collapse
Hah, thanks for clearing that up - good to know. Didn't mean to attack you, just asking the questions trying to keep it all honest. So should we assume his working/not working list applies here?
psych0r3bel said:
Hah, thanks for clearing that up - good to know. Didn't mean to attack you, just asking the questions trying to keep it all honest. So should we assume his working/not working list applies here?
Click to expand...
Click to collapse
Don't mind. I really want to let everyone know that the main work was made by sultanqasim as I'm not willing to steal anyone's work. I just want to provide a more current build of his work to the community. Assume some minor things have already been fixed but it's probable that you'll experience camera, nfc, radio... issues here as well... I also hope this'll be fixed soon
I'm really glad to see this coming along! Keep up the good work. I'm not much of a tester normally but I think Im going to give it a shot later tonight and let you know what issues I can find.
krassermensch said:
Don't mind. I really want to let everyone know that the main work was made by sultanqasim as I'm not willing to steal anyone's work. I just want to provide a more current build of his work to the community. Assume some minor things have already been fixed but it's probable that you'll experience camera, nfc, radio... issues here as well... I also hope this'll be fixed soon
Click to expand...
Click to collapse
So glad to see the credits given, and insight to what testers will find.
Didn't want to see any drama, I thanks for putting the time in and squid for laying these ground work!
Sent from my HTC 10 using XDA-Developers mobile app
@krassermensch, thanks for your efforts but... If you're going to publish his work, how about updating the OP with his bug list and the title with pre-alpha. Just so users have more information, instead of the vague "it might be buggy". We know its buggy. Specifics about what works and doesn't is what people would like to know.
This still accurate?
squid2 said:
Currently working:
Display
WiFi
Bluetooth
Sensors
Audio through bluetooth
Broken:
Audio through built in speakers or headphones
RIL
Fingerprint sensor
Camera
Various other smaller things
Click to expand...
Click to collapse
Moderator Information,
Thread has been moved to general, as the OP is only hosting the work for another user.
Hi, I flashed your rom with the open gapps, booted up and connected to wifi and logged in through google. I don't have any cellular connection though. I am making a nano back-up of this and going back to stock until I figure out the cellular connection. Let me know how I can help or report bugs to you.
matteosaeed said:
Hi, I flashed your rom with the open gapps, booted up and connected to wifi and logged in through google. I don't have any cellular connection though. I am making a nano back-up of this and going back to stock until I figure out the cellular connection. Let me know how I can help or report bugs to you.
Click to expand...
Click to collapse
I think the RIL is not working yet which is what you need for the cellular connection. This definitely needs more work before its useable. But really good progress to date.
rav101 said:
I think the RIL is not working yet which is what you need for the cellular connection. This definitely needs more work before its useable. But really good progress to date.
Click to expand...
Click to collapse
Sweet. I can test more at nights when I am at home. Doing the nanodroid now of this build.
---------- Post added at 09:17 PM ---------- Previous post was at 08:52 PM ----------
question, I am trying to go back but I am getting the failed to mount '/system' (invalid argument), any tips on how to bypass that?
Disclaimer:
* You flash this ROM at your own risk and responsibility.
* This ROM is provided without ANY WARRANTY WHATSOEVER, not even the warranty that it works.
* None of the developers of this ROM will be held accountable for any damages, complaints or anything.
Hello! I have stopped all android related work year ago, last month I decided to try @SuperLamic device trees from Z1 forum, but I wasn't abble to boot CM kernel and I decided to use stock kernel and try boot it, done. Had some touch screen isues and some more but after some days of working on it finally made kernel fully functional. I have contacted SuperLamic and got his permission and want to share build backported from his Z1 but its a bit diferent because I'm using different kernel -
patched stock kernel, here is build and changelog , almost fully working! I have opened this thread mainly bacause I want to try help SuperLamic and hope we get clear rom on booth devices. I will share working stock kernel on git hope at a weekend! At a weekend I will solder uart on my seccond z1c and dump bootloop log and provide it to SuperLamic since he was unable to debug an CVE clean kernel which have bootloop because of his broken Z1, hope we switch soon to that kernel on booth devices. One more diferencie my build is selinux enforce, I will try to make a diff file and provide patch for Z1 guys. Curently done this using my PoC which curenly have updated selinux stufs, but I will need to decompile booth sepolicy and make an diff file which we can use to easy implement into Z1 and Z1C device tree.
If you need twrp:
- read this https://forum.xda-developers.com/showpost.php?p=73586527&postcount=169
Credits which I need to put on this is:
1. ofcorse full credits goes to @SuperLamic since I have used his device tree from Z1
2. special thanks to guys who worked on camera libshims: tomascus, nailyk, rcstar6696, xkeita, special thanks to @tomascus guy who worked with me 1 year ago when we got stock kernel working on nougat and done some initial work to stock camera hals, just to remind you this is a thread https://forum.xda-developers.com/crossdevice-dev/sony/discussion-development-custom-rom-t3479108
Kernel source code:
- https://github.com/SuperLamic/android_kernel_sony_msm8974 branch cm-14.1
If you notice any bug please report, need to know to be able to make list of bugs and asign fixing priority!
munjeni said:
If you notice any bug please report, need to know to be able to make list of bugs and asign fixing priority!
Click to expand...
Click to collapse
Here's what I found -
* default screen dpi = 480. Not a problem to change, but it's pretty funny looking
* 'mtp host has stopped' message, whenever certain activity chooser functions are called on. Doesn't cause any problems, just press 'ok' and it goes away.
I forgot to change dpi to 320, next build will get that change. About mtp host stopped working, solution (temporary) is to disable mtp app in setting so it will no more cause those popups, I didn't noticed anything aftected by disabling that app, have no idea what is usage of these app. When I get more free time will look into source code to get idea whats going on with that app. Thanks for reporting!
I'm curently on stock rom since my battery is almost dead, need replacement battery Anybody recommend me an good battery for z1c?
Hi @mujenii!!
You did it!!¡
Congratulations!?!!
Sent from my Nexus 7 2013 WiFi using XDA-Developers Legacy app
Hi mate, thanks! I just spent some days on it but I can't say I did it, guys from z1 forum is responsible for our almost stable and great rom!
That Full stock camera hal means that the camera will be as good as in stock sony roms ? It would be dream come true since camera is huge thing for me on this phone
MozkoZrout said:
That Full stock camera hal means that the camera will be as good as in stock sony roms ? It would be dream come true since camera is huge thing for me on this phone
Click to expand...
Click to collapse
Yes man camera is almost the same, in my opinion better than stock one! Fast response and fast focus
Some screen shoots
munjeni said:
Yes man camera is almost the same, in my opinion better than stock one! Fast response and fast focus
Click to expand...
Click to collapse
Wow awesome i need to try it than, you shall be praised as god if you really made this possible
Hello,sorry for my blindness)) but where is the link to the download? throw off me please..
AreusShow said:
Hello,sorry for my blindness)) but where is the link to the download? throw off me please..
Click to expand...
Click to collapse
Post 1... 'build and changelog'
levone1 said:
Post 1... 'build and attachments'
Click to expand...
Click to collapse
Fanks
Thank you for the great job! Gonna flash it today and report!! :good::good:
Hello @munjeni , is Real Recovery required for this rom?
cam not working
i instal this rom>cam not work
AreusShow said:
i instal this rom>cam not work
Click to expand...
Click to collapse
Make sure to full wipe, (data, caches, and system). Rom and camera working fine.
AreusShow said:
i instal this rom>cam not work
Click to expand...
Click to collapse
heorung said:
Hello @munjeni , is Real Recovery required for this rom?
Click to expand...
Click to collapse
Read carefully my site instructions and chance for bad installation is minimal. I'm on our rom for about 3 days, apsolutly my favorite rom! Camera apsolutly work!
If somebody need wallpapper and the same look like my screenshoots use walpapper from http://orig00.deviantart.net/d43e/f...llpaper_red_034_by_charlie_henson-daa22ts.png and weather from
https://play.google.com/store/apps/details?id=mobi.lockdown.weather