Develop Bugs

(WIP) ChamelonOS 4.4*

Optimus G Owners,
I am working on my first build from source. I noticed we didn't have an updated build of ChameleonOS 4.4 of this forum. I am fairly new to this and have a fully capable pc to build it from scratch. Problem is I need some help with building and some testers. So if your interested in a collaboration with this build please leave a comment or leave me a message.
I have in installed Python, Git and the Sdk and am working on Forks and Repos. If you know of any good sources or suggestion please feel free to leave the below .

Repo is in progress
should be a couple hours to finish downloading and about an hour to build will try first build on my phone to see if it boots. if so I will post a download link to try it out.

Rmontoya83 said:
Optimus G Owners,
I am working on my first build from source. I noticed we didn't have an updated build of ChameleonOS 4.4 of this forum. I am fairly new to this and have a fully capable pc to build it from scratch. Problem is I need some help with building and some testers. So if your interested in a collaboration with this build please leave a comment or leave me a message.
I have in installed Python, Git and the Sdk and am working on Forks and Repos. If you know of any good sources or suggestion please feel free to leave the below .
Click to expand...
Click to collapse
I'm up for testing. I use multiRom. That could either be a benefit to your testing or a downfall. I usually like to know and inform others that use Multi what any issues are.

i tried to use multirom
dopy25 said:
I'm up for testing. I use multiRom. That could either be a benefit to your testing or a downfall. I usually like to know and inform others that use Multi what any issues are.
Click to expand...
Click to collapse
on my ls970 it stated it was not supported. hmm that's weird.

Rmontoya83 said:
on my ls970 it stated it was not supported. hmm that's weird.
Click to expand...
Click to collapse
Multi ROm? Yes, the app is not supported on our device, nor is the official recovery. If you are interested, I will link you to the xda thread.
http://forum.xda-developers.com/showthread.php?t=2734551
Follow this and if you have any questions ask them in that thread. I will help if you need. Just don't want to clutter your thread with questions about that one.

nice i never knew that was there.
dopy25 said:
Multi ROm? Yes, the app is not supported on our device, nor is the official recovery. If you are interested, I will link you to the xda thread.
http://forum.xda-developers.com/showthread.php?t=2734551
Follow this and if you have any questions ask them in that thread. I will help if you need. Just don't want to clutter your thread with questions about that one.
Click to expand...
Click to collapse
well back to work, I hope I can get this Chameleon OS up and running I hope I will have it done by this evening.

Failure
First build was a failure. Trying for round two tonight need to figure out what's missing. Will check my sources tonight hopefully I can get this working. If not I will ask some question from the pros =)

Rmontoya83 said:
First build was a failure. Trying for round two tonight need to figure out what's missing. Will check my sources tonight hopefully I can get this working. If not I will ask some question from the pros =)
Click to expand...
Click to collapse
The build failed, or the rom failed to boot?

build failed i think i figured out why
Think i was missing sources or added to many to my sync folder . Trying to clean up my build folder and make lunch.

Never heard of chameleon os, but I'd love to test

[ROM][6.0.1][Official]Vanir/Commotio for D2SPR Samsung Galaxy S3 Sprint

VanirAOSP and Commotio Android MM 6.0.1 for the SPH-L710​
Credits go to Team Vanir and DHO for the development of these roms.
Disclaimer : Use these ROM's at your own risk and please don't blame me if you brick your device . If you are new and don't know what your doing please don't flash these ROMS until you've done your research , read through the thread, and made yourself aware of previous known issues. THIS THREAD IS FOR DEVELOPMENT AND BUG REPORTING ONLY EVERYTHING ELSE WILL BE IGNORED. Use the Q&A thread for questions and other issues.
Note for mods: I am taking over for MonstaDriva, if this thread presents an issue or there is a better way to do this let me know.
This thread will be updated as I remember to add things.
I do not have this device, therefore I can not test any builds. I am also not known in the Vanir/Commotio community yet. This is my first time maintaining a device, I will probably screw up, a lot, until I get practiced at it. Because I do not have this device, I am extremely reliant on bug reports by the community, therefore if you are not reporting a bug all other questions or issues go in the Q&A thread. I REPEAT THIS THREAD IS FOR DEVELOPMENT AND BUG REPORTING ONLY EVERYTHING ELSE WILL BE IGNORED. This is to keep this thread clean so I can keep track of what needs to be fixed.
The following is required if reporting a bug, everything else will not receive a response and the bug may or may not be ignored.
Reporting a bug:
Read through the whole thread. See if bug is already reported
Read through again.
If bug is already reported, provide link to original report, add your logs, and any extra information that expands upon what is missing.
List rom. EG. Vanir or Commotio
List build date
List official or unofficial
Describe issue in detail. All know facts
Steps to reproduce issue
Logs. Any and every log imaginable. Eg. Logcat, kmesg, dmesg, etc.
Read through the whole thread again
Anything else that will help diagnose the issue
If you can satisfy all the above requirements then you may report a bug.
Downloads:
Unofficial: Coming soon
Official Vanir: http://www.emccann.net/nuclearmistake/VanirAOSPNightlies/d2spr/
Official Commotio: http://www.emccann.net/dho/3-Vanir-mirror/4-nighties/
GAPPS:
DHO: http://www.emccann.net/dho/5-Gapps/
OpenGapps: http://opengapps.org/
Installation:
Backup
Wipe -- Note: If coming from stock you must wipe the internal storage.
Flash
Gapps -- Note: do not reboot before flashing gapps. This is an issue with how gapps are flashed on android 6. Source
Sources:
Rom: https://github.com/VanirAOSP
Device: https://github.com/VanirAOSP/device_samsung_d2spr
Kernel: https://github.com/CyanogenMod/android_kernel_samsung_d2
Gerrit: http://gerrit.vanir.co:7070
Community: https://plus.google.com/communities/111378032131473754160
XDA:DevDB Information
[ROM][6.0.1][Official]Vanir/Commotio for D2SPR Samsung Galaxy S3 Sprint, ROM for the Sprint Samsung Galaxy S III
Contributors
Lrs121
Source Code: https://github.com/VanirAOSP
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod, AOSP, CAF Mixed
Version Information
Status: Nightly
Created 2016-05-11
Last Updated 2016-08-28

Reserved

Lsr121 is the new official rom/thread maintainer .
Thank you Lsr121 for doing this . Thread looks great and I appreciate you taking over the official Vanir/Commotio !! Users will appreciate ya too man .:good: I will be asking the mods to close my old thread soon .

MonstaDriva said:
Thank you Lsr121 for doing this . Thread looks great and I appreciate you taking over the official Vanir/Commotio !! Users will appreciate ya too man .:good: I will be asking the mods to close my old thread soon .
Click to expand...
Click to collapse
Good luck with everything!

Looks good. Lrs121, for not having this device, you have definitely done a lot for it. Thanks bro.

I was honestly expecting this thread to explode with comments. Well I've gotten a new wireless card and can begin attempting to push patches if anyone thinks they may be necessary.

Lrs121 said:
I was honestly expecting this thread to explode with comments. Well I've gotten a new wireless card and can begin attempting to push patches if anyone thinks they may be necessary.
Click to expand...
Click to collapse
Vanir run's so good usually that there's seldom any issue even when other devices are having them . You are sort of like the infamous Maytag Repairman Bored for wanting to patch . Sent you a pm .

Anyone install this yet?? Screenshots would be cool...
I JUST reverted back to Wicked X 4.4 because the new 6.0 Roms i've tried (OctOS, AICP) have the exact same issues with phone calls, audio, and especially BT. They're usable, but barely. Takes too long for calls to answer, and it's buggy....after answering, they'll still appear to be receiving a call haha. They're heavily based on CM13. Dunno how much AOSP. If someone had a screenshot of their InCallUI with this ROM that'd be awesome.... if it's different I'd go ahead and wipe 4.4 again to try it.
EDIT
If there's a Q&A thread, I couldn't find it....Im sorry to be so noob but, should I just make a new thread? Again, such noob but, would it make sense to make a thread in QA titled the same as this thread, and link to THAT thread in this thread's OP?

akira6968 said:
Anyone install this yet?? Screenshots would be cool...
I JUST reverted back to Wicked X 4.4 because the new 6.0 Roms i've tried (OctOS, AICP) have the exact same issues with phone calls, audio, and especially BT. They're usable, but barely. Takes too long for calls to answer, and it's buggy....after answering, they'll still appear to be receiving a call haha. They're heavily based on CM13. Dunno how much AOSP. If someone had a screenshot of their InCallUI with this ROM that'd be awesome.... if it's different I'd go ahead and wipe 4.4 again to try it.
EDIT
If there's a Q&A thread, I couldn't find it....Im sorry to be so noob but, should I just make a new thread? Again, such noob but, would it make sense to make a thread in QA titled the same as this thread, and link to THAT thread in this thread's OP?
Click to expand...
Click to collapse
The qa thread is meant to be made but it seems it hasn't auto generated. I plan to make one as soon as I get back to my desktop.

Lineage OS on LeEco Le Pro 3

Hello everyone,
the question and disscussion is:
Do we get Lineage OS support in the Future? it does not matter if unofficial or official, but what do you think?
I saw the LeEco le Max 2 get some unofficial support, so it could be that some Devs will try it.
It would be awesome *_*
I think the problem is, that the community isn't that big like for the le Max 2, but maybe it will get bigger in the future.
What do you think? :good:

I'm running my own custom image of LineageOS 13.0. All is working as expected, but I don't have time to clean all the stuff to share it with public. I uploaded my sources that works in https://www.github.com/corvusmod, so if someone wants to build it, feel free
For L14 version, camera is not working already and will not work until Leeco release N for Pro3

I think, it's not discussion, but it is a question. So, it should be in "QUESTIONS & ANSWERS". Le Max 2 have bigger community, because this phone is cheaper and cheapest Le Max 2 was for 180-200$. This mobile is older. Our Le Pro 3 have few months and in future it could have more community and ROMs like this.

corvus said:
I'm running my own custom image of LineageOS 13.0. All is working as expected, but I don't have time to clean all the stuff to share it with public. I uploaded my sources that works in https://www.github.com/corvusmod, so if someone wants to build it, feel free
For L14 version, camera is not working already and will not work until Leeco release N for Pro3
Click to expand...
Click to collapse
Wooow! Someone interested?
It would be awesome!
:fingers-crossed:

Who could we talk to in order to get official support?

I dont know, but to get official support there should be at first a stable unofficial lineage OS Version. I do not know much about creating ROMs but i hope someone does and will create a masterpiece for le pro 3

I hope so

I can continue cleaning of the LOS13. I have quite a bit of free time and want to get started on a project. If corvus doesn't mind, I'll make a thread on my progress and, eventually, some stable builds.

corvus said:
I'm running my own custom image of LineageOS 13.0. All is working as expected, but I don't have time to clean all the stuff to share it with public. I uploaded my sources that works in https://www.github.com/corvusmod, so if someone wants to build it, feel free
For L14 version, camera is not working already and will not work until Leeco release N for Pro3
Click to expand...
Click to collapse
Hi Corvus,
I've been trying to build slim from the repo you forked, but it keeps telling me I have no recovery, and ends up erroring out. I tried on ubuntu 16.04 lts though, could be my issue. Gonna try your lineage 13 version.

jts2111 said:
I can continue cleaning of the LOS13. I have quite a bit of free time and want to get started on a project. If corvus doesn't mind, I'll make a thread on my progress and, eventually, some stable builds.
Click to expand...
Click to collapse
Would be awesome. I will try your build!
Good project looking forward to

manuelbvb said:
Would be awesome. I will try your build!
Good project looking forward to
Click to expand...
Click to collapse
I'll edit a link to the thread I make with to-dos based off the source code I can see.
Here's where I'll post progress!: https://forum.xda-developers.com/le-pro3/development/progress-lineage-os-13-t3546126

jts2111 said:
I can continue cleaning of the LOS13. I have quite a bit of free time and want to get started on a project. If corvus doesn't mind, I'll make a thread on my progress and, eventually, some stable builds.
Click to expand...
Click to collapse
Hi @jts2111,
No problem from my side. TS team shared with me the sources, I modified them for Lineage, and try to do some tweaks (already uploades) and have some more in local, but causes some problems, so I didn't upload them.
With this image I get more than 3 days of batt time and a sot of 8 hours, so it's good for me. My only concern is that I was not able to make Camera2 HAL working to get manual settings. But I have little time to test, so any help from this side is welcome.
Only one thing, please, share the code in a public repo so TS, me or any other developer can see it and work together.
Thanks
---------- Post added at 10:35 PM ---------- Previous post was at 10:32 PM ----------
jts2111 said:
I can continue cleaning of the LOS13. I have quite a bit of free time and want to get started on a project. If corvus doesn't mind, I'll make a thread on my progress and, eventually, some stable builds.
Click to expand...
Click to collapse
robertzas said:
Hi Corvus,
I've been trying to build slim from the repo you forked, but it keeps telling me I have no recovery, and ends up erroring out. I tried on ubuntu 16.04 lts though, could be my issue. Gonna try your lineage 13 version.
Click to expand...
Click to collapse
For Slim, please use the fork from where I get the code. See it in github. It's TS source, so it should work.

corvus said:
Hi @jts2111,
No problem from my side. TS team shared with me the sources, I modified them for Lineage, and try to do some tweaks (already uploades) and have some more in local, but causes some problems, so I didn't upload them.
With this image I get more than 3 days of batt time and a sot of 8 hours, so it's good for me. My only concern is that I was not able to make Camera2 HAL working to get manual settings. But I have little time to test, so any help from this side is welcome.
Only one thing, please, share the code in a public repo so TS, me or any other developer can see it and work together.
Thanks
Click to expand...
Click to collapse
I forked your repo and shared it in my post. I'll work on what you mentioned. One of my top (long term) goals is complete CTS compatibility. With safetynet passed, there'd be nothing that would really pull you back to stock.

Definitely, I'm preparing the Kernel code after code to ensure we get a very clean and functional Kernel for the future, instead of just merging the one from LeEco with more than 80% of unneeded bits due to their other devices being at the same place (shameful).
This will get a ~30MB Kernel reduced to around 12MB and thus make custom ROMs perform a lot better and boot immensely faster after all.
I'd only need one sense of common attitude which is asking LeTV to keep the Kernel source up-to-date when they launch OTAs as well, I've seen some comments regarding their image stabilization fix at latest release (OTA) which is only possible at Kernel/blob level and thus if we want to have this feature working (at least partially) we need the source code "right off the bat" to get those fixes. Please, make pressure on their forums for 5.9 x720 Kernel source code and for nougat preview builds, I'd appreciate to even help with their own EUI for that matter, I'll see if I can get in touch with them concerning those points.
Do we have someone from China or someone with experience with Chinese so we can attach our discussions there?

I do hope they keep the open source up to date, but it seems they are doing the bare minimum to apply to Google's open source policy. I'm in the US, so I have the x727 with 1 SIM. We would need someone to test with a x720 as well.

@GalaticStryder, Leeco only will post the sources needed to avoid license problems with GPL, so dont wait much help from them. But we can ask...
@jts2111, I have a 720, so I can test your builds.

@jts2111
I received my X720 this week and I could also test your experimental build.
It would be nice to already start with a LineageOS custom ROM as first ROM to avoid a lot of reinstallation / reconfiguration of apps with other kind of custom ROMs.

[HomeBrews] Pixel 2: LineageOS/CarbonROM/DirtyUnicorns

Dirty Unicorns is a project that started out with no name. It was a project that was first based off AOKP back in the early days of Jelly Bean. In the early days it was just a one man show on one device, the EVO 3D. Since then, many others have joined the project and it has grown exponentially.
We have seen a lot of talent contribute to this project of ours. Big or small, the focus was always on contributing to the community. That is ultimately why we do what we do. After Jelly Bean, we decided to move to a new base, OmniROM. While AOKP was fun, OmniROM proved to be even more exciting base because it challenged us to see what we could do with a project that had different goals in mind. We learned a lot and again, gain contributors. With Lollipop, we moved to an AOSP base with a lot of patches from CAF to make our older devices function as they should. We grew even more and learned a whole lot more.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Pre-Disclaimer:
THIS IS AN UNOFFICIAL BUILD. The intent is to showcase what is coming up soon. I have been working hard on getting Walleye on a level I consider DD ready, especially from a security side of things.
Please keep any problems with those builds in this thread, I don't accept any bug reports for any other builds other than my HomeBrews.
Disclaimer:
While I make every effort to test these builds as much as possible, I am not responsible for anything that may happen to your device. I ask that you do your part to know your device and know how to recover from problems before you flash or post that you broke your phone!
Support:
I spend an astonishing amount of time developing this device. I can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Ask a question in this forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
Notice:
This build includes GApps for now. We're still working on ways to not prebundle it.
Before you flash, make sure you're on the latest 8.1 stock builds (and bootloader), then flash the ROM in TWRP.
Instructions :
Boot to TWRP
Format Data (If you didn't type YES, you did it wrong!)
adb sideload homebrews.zip
reboot system
(to gain root you must first boot homebrewsROM. Then reboot and to TWRP and install Magisk 1 6.0)
See below
Reporting Bugs:
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
What is your--
Build Date:
Did you--
wipe:
all data?
install gapps when you weren't suppose to?
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
WARNING: These are my personal testing builds. They include unmerged, work-in-progress stuff such as SuperUser, Privacy Guard, Google Play services etc. DO NOT FLASH 3RD PARTY GAPPS PACKAGES!
If you see a warning about vendor partition mismatch, you can ignore that in most cases, but before reporting issues you should be on the right version (without the warning).
### RELEASES ###
https://drive.google.com/drive/folders/1NY1j-eH9demisz5Y05jeIPGXipENo5yK?usp=sharing
XDAevDB Information
LineageOS, ROM for the Google Pixel 2
CarbonROM, ROM for the Google Pixel 2
DirtyUnicorns, ROM for the Google Pixel 2
Contributors
Source Code: http://github.com/LineageOS
Source Code: http://github.com/CarbonROM
Source Code: http://github.com/DirtyUnicorns
Source Code: http://github.com/TresReinosDeLeche
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Testing
### DONATE ###
paypal.me/JacobStermer
Created 2018-02-2
Last Updated 2018-03-Today

reserved

Is there really no mainstream support for this device? Everything that comes out, no disrespect, is moonshine lol.

I for one am happy to see it.

iluvamk said:
I for one am happy to see it.
Click to expand...
Click to collapse
Me to ? do we need to flash twrp after the ROM like on pixel 1?

GohanBurner said:
Is there really no mainstream support for this device? Everything that comes out, no disrespect, is moonshine lol.
Click to expand...
Click to collapse
Don't devices that are not officially supported need someone to start the process and possible become a maintainer? I could be mistaken. I myself think moonshine is pretty cool and would love to know how to make it.

Holy crap do my lying eyes deceive me or is there a rom for the Pixel 2 LOL,,,thanks brother for letting me know about this. Now who is going to be the guinea pig and flash it LOL
razrlover said:
Don't devices that are not officially supported need someone to start the process and possible become a maintainer? I could be mistaken. I myself think moonshine is pretty cool and would love to know how to make it.
Click to expand...
Click to collapse

Archangel said:
Holy crap do my lying eyes deceive me or is there a rom for the Pixel 2 LOL,,,thanks brother for letting me know about this. Now who is going to be the guinea pig and flash it LOL
Click to expand...
Click to collapse
I'll flash it I just need more clear instructions. Likes wipes and do I need to flash twrp?

Let us know how it goes brother.
jasonsamms666 said:
I'll flash it I just need more clear instructions. Likes wipes and do I need to flash twrp?
Click to expand...
Click to collapse

jasonsamms666 said:
I'll flash it I just need more clear instructions. Likes wipes and do I need to flash twrp?
Click to expand...
Click to collapse
boot to twrp.
wipe all data
adb sideload lineageos
reboot system.
After first boot then you can flash Magisk for root.
right now i am getting FC on Camera APP, X Google, Ok Google, and T Google something. My computer just crashed building the potential fix.

Ryche666 said:
boot to twrp.
wipe all data
adb push lineageos
reboot to bootloader
boot to twrp
adb push magisk
reboot to system.
right now i am getting FC on Camera APP, X Google, Ok Google, and T mobile something. My computer just crashed building the potential fix.
Click to expand...
Click to collapse
glad i did a backup. i just tried to install it normally and it didn't boot. i got ballsy

jasonsamms666 said:
glad i did a backup. i just tried to install it normally and it didn't boot. i got ballsy
Click to expand...
Click to collapse
Sorry, i got super anxious myself when i finally got playstore, phone, and text messaging working.
Thus the piss poor thread that i copy and pasted from taimen's lineage.

GohanBurner said:
Is there really no mainstream support for this device? Everything that comes out, no disrespect, is moonshine lol.
Click to expand...
Click to collapse
I heard they are working on taimen first then our phone. For the most part it is all their that it seems. ****ty part is they cannot make it official until they find out why you cannot flash gapps.
So the work around is make it unofficial and build gapps inside.

Ryche666 said:
I heard they are working on taimen first then our phone. For the most part it is all their that it seems. ****ty part is they cannot make it official until they find out why you cannot flash gapps.
So the work around is make it unofficial and build gapps inside.
Click to expand...
Click to collapse
FWIW this is what's been done with the Essential Phone.

razrlover said:
Don't devices that are not officially supported need someone to start the process and possible become a maintainer? I could be mistaken. I myself think moonshine is pretty cool and would love to know how to make it.
Click to expand...
Click to collapse
I was the same way. A **** ton of reading and a lot of PMing. It is pretty simple when you get the hang of it. This early in the game you get to see the codes that attract you to certain roms or kernels.
Right now i just need to make sure it is stable before i work on the kernel or choose what rom i am gonna stick with.

NadavCE said:
FWIW this is what's been done with the Essential Phone.
Click to expand...
Click to collapse
That's what i heard. If i knew that last weekend we would have had that much sooner.

Awesome, glad to see some work

Sideloading it worked. Totally clean install- formatted data (as in typed "yes") and pushed the files like described.
*Wouldn't pick up my 5ghz wireless network during setup, but connected once I was in the os.
LTE seems fine, the screenshot is par for what I get around here. Still setting up and testing, but looking good so far!
Thanks @Ryche666

Chronzy said:
Sideloading it worked. Totally clean install- formatted data (as in typed "yes") and pushed the files like described.
*Wouldn't pick up my 5ghz wireless network during setup, but connected once I was in the os.
LTE seems fine, the screenshot is par for what I get around here. Still setting up and testing, but looking good so far!
Thanks @Ryche666
Click to expand...
Click to collapse
Can you share the complete steps and details on how you flashed it? Thank you!

infamousvincci said:
Can you share the complete steps and details on how you flashed it? Thank you!
Click to expand...
Click to collapse
boot to twrp.
wipe all data
adb sideload lineageos
reboot system.
After first boot then you can flash Magisk for root.

LineageOS 17.1 - Xiaomi A2 Lite - Development Only

I have some previous experience building rom from the WIko Wax and the Huawei P8.
I run the Xiaomi A2 Lite as my daily driver, so I can't afford to test this ROM.
I do not know if this will even boot. As I said, I need you members of this forum to test this and tell me what works and the ROM's performance.
This ROM is based on LineageOS 17.1, so that is Android 10.
With a bit of luck this should work out of the box. It is here, that I should thank the pople from the Team Potato here https://forum.xda-developers.com/mi-a2-lite/development/10-0-posp-v3-q-daisy-t4011191 They are the ones who made most of the work to bring Android 10 to this device. I have just modified it a bit. Once again, props to them.
And here are the links to the different versions:
Version 0.1
No device audio
No camera
Link V0.1
Version 0.2
LED not working when charging
Fixed Camera
Fixed Audio
Link V0.2
Version 0.2.1
Fixed LED
Link V0.2.1
Version 0.3
More breaking than fixing
Wireless display fixed
Link V0.3
Version 0.5
Everything should be fixed now
OTA crashes whe nhitting install
Link V0.5
Version 0.6
Uses right microphone for camcorder
Link V0.6
Version 0.7
Fixed wireless display
Fix decoder.avc errors
Build tinymix
Build libldacBT_dec
Link V0.7
Version 0.8
Everything should work
Stable flashlight behaviour
Fixed green camera tint in low light
Link V0.8
Version 0.9
Camera switching fixed
Everything works
Working OTA
Link V0.9
Version 0.9.1
Fixed back video recording
Link V0.9.1
Version 0.9.5
Fixed flash issue
Should be bug-free
Link V0.9.5
Version 0.9.5.1
Fixes GCAM
Link V0.9.5.1
Version 1.0
Everything is stable now
New HAL1/HAL3 switch
Link V1.0
Always latest url: https://github.com/a-huk/otaserver/releases/download/09/lineage-17.1-20201115-UNOFFICIAL-daisy.zip
It is a zip, I suppose that it will be possible to flash it through TWRP, just clean flash as much as possible. I am not responsible for any harm this may do to your devices.
Again, please only post with feedback on the ROM, logcats would be useful as well or some benchmarks. I would like to make this stable and if possible official with Lineage. I know this forum is a mess, but again it is only for development. I will make propper one if this ever works. I need testers, thanks in advance. And props to the Potato Team
XDA:DevDB Information
LineageOS 17.1, ROM for the Xiaomi Mi A2 Lite
Contributors
reujea0
Source Code: https://github.com/a-huk/device_xiaomi_daisy
ROM OS Version: Android 10
Based On: LineageOS
Version Information
Status: Beta
Created 2020-04-02
Last Updated 2020-04-04

It boots, it runs great. No audio of any kind and camera (stock and GCam) not working. So far..
In any case, thanks for the rom and fast delivery.
Sorry, BT and headphones audio works for music and notifications.

celrau said:
It boots, it runs great. No audio of any kind and camera (stock and GCam) not working. So far..
In any case, thanks for the rom and fast delivery.
Sorry, BT and headphones audio works for music and notifications.
Click to expand...
Click to collapse
Thanks for the quick logcat
I will try and fix these, in the meantime, could you try this app https://play.google.com/store/apps/details?id=com.footej.camera2?

reujea0 said:
could you try this app https://play.google.com/store/apps/details?id=com.footej.camera2?
Click to expand...
Click to collapse
I tested camera with a camera app "vanilla" camera2 and it's not working..

reujea0 said:
Wew building for a wiko phone must have been a pain in the ass welp welcome in the community and good luck
~ Lacia
Click to expand...
Click to collapse

lacia-chan said:
reujea0 said:
Wew building for a wiko phone must have been a pain in the ass welp welcome in the community and good luck
~ Lacia
Click to expand...
Click to collapse
Yeah, plus that one was based off a Nvidia SOC
Click to expand...
Click to collapse

celrau said:
I tested camera with a camera app "vanilla" camera2 and it's not working..
Click to expand...
Click to collapse
Second testing version was released 0.2, see the link above

reujea0 said:
Second testing version was released 0.2, see the link above
Click to expand...
Click to collapse
heyo,
I have a few things to say:
- Your bringup is a mess
- Do your bringup on these trees https://github.com/PotatoDevices/device_xiaomi_daisy/tree/6180e3d5870834981e5f41424014047038ca235c
https://github.com/PotatoDevices/vendor_xiaomi_daisy
That will fix audio and cam

Thank you so much for your work. Imma fan of Lineage since the beginning and would prefer it over stock rom.
I dont want to be rude or anything but your bringup is quite a mess in my eyes and why is audio and **** not working for you since almost everything works fine here besides the wifi dsplay and fm radio
Click to expand...
Click to collapse
WTF!? It's for testing purposes only as OT says. Maybe u can contribute and help solving those issues?

reujea0 said:
Second testing version was released 0.2, see the link above
Click to expand...
Click to collapse
Everything I've tested works now, thanks for prompt delivery.

celrau said:
Everything I've tested works now, thanks for prompt delivery.
Click to expand...
Click to collapse
Sick, could you test some more things, like sd, calls, LTE, and run an ANTUTU benchark?

reujea0 said:
Sick, could you test some more things, like sd, calls, LTE, and run an ANTUTU benchark?
Click to expand...
Click to collapse
SD card works, calls I just tested with my other phone, LTE later since I don't have it at my current location. GPS works pretty good. I never used ANTUTU but will give it a try later.
---------- Post added at 11:34 AM ---------- Previous post was at 11:19 AM ----------
Notification/charging light not working

Cappucinto said:
Thank you so much for your work. Imma fan of Lineage since the beginning and would prefer it over stock rom.
WTF!? It's for testing purposes only as OT says. Maybe u can contribute and help solving those issues?
Click to expand...
Click to collapse
XD, I took a look at his commits and they looked like a mess and i linked him to my updated trees that have the audio and cam issue solved so next time read further into the message instead of trying to become a white knight thanks

lacia-chan said:
XD, I took a look at his commits and they looked like a mess and i linked him to my updated trees that have the audio and cam issue solved so next time read further into the message instead of trying to become a white knight thanks
Click to expand...
Click to collapse
Yeah they are a mess, getting started ?, haven't done this in a while. Yeah, this is pretty much your tree with your latest commits and some changes to convert it to a lineage tree. I also ignore neverallows to let the build finish. I will have to eventually deal with them to make it into an official build. In the meantime I plan on hosting an OTA server on my own. I am not hiding that most of this is your work, it is forked and I thank the POSP team and other devs who worked on the A2 Lite, thanks again. I just prefer LOS and there seems to be demand for it so I'm here trying to build it.
I don't think that there is a need for anyone to argue, we all have the same phone, more ROMs are always welcome and merit should be given where it is due, which I think has been done.
I will make another post in the following days, where everything is properly outlined with some more explanations.

reujea0 said:
Yeah they are a mess, getting started , haven't done this in a while. Yeah, this is pretty much your tree with your latest commits and some changes to convert it to a lineage tree. I also ignore neverallows to let the build finish. I will have to eventually deal with them to make it into an official build. In the meantime I plan on hosting an OTA server on my own. I am not hiding that most of this is your work, it is forked and I thank the POSP team and other devs who worked on the A2 Lite, thanks again. I just prefer LOS and there seems to be demand for it so I'm here trying to build it.
I don't think that there is a need for anyone to argue, we all have the same phone, more ROMs are always welcome and merit should be given where it is due, which I think has been done.
I will make another post in the following days, where everything is properly outlined with some more explanations.
Click to expand...
Click to collapse
oh no you got me wrong, Your credits were alrights its just that your source is a mess and that trees i linked have the issues like cam and audio fixed and nope more roms is not a great idea because we had a buildbot apocalypse earlier during the pie days we had like 42 roms at that point

That's awesome news @reujea0, congratulations!
LineageOS is all I need for this phone.
I'll move to this ROM as soon as it gets close to official (I use it as my daily driver).

lacia-chan said:
oh no you got me wrong, Your credits were alrights its just that your source is a mess and that trees i linked have the issues like cam and audio fixed and nope more roms is not a great idea because we had a buildbot apocalypse earlier during the pie days we had like 42 roms at that point
Click to expand...
Click to collapse
Yeah, can completely agree with this, but tbh I feel like Los is a must for any phone. I'm not saying that it is better/worse than other ROMs but anyone in the scene knows it and most of them are stable and close to AOSP.

reujea0 said:
Sick, could you test some more things, like sd, calls, LTE, and run an ANTUTU benchark?
Click to expand...
Click to collapse
LTE works fine
---------- Post added at 05:32 PM ---------- Previous post was at 05:20 PM ----------
lacia-chan said:
XD, I took a look at his commits and they looked like a mess and i linked him to my updated trees that have the audio and cam issue solved so next time read further into the message instead of trying to become a white knight thanks
Click to expand...
Click to collapse
Your intervention, well intended as you say it was should have been private, otherwise it is what it looks like.
---------- Post added at 06:26 PM ---------- Previous post was at 05:32 PM ----------
Please enable signature spoofing for MicroG

LineageOS still my favorite ROM.
Well, hope will be official soon.
EDIT : Could you please share the change log if the update is released ?

1st of all thank you so much, for starting this missing project, this afternoon i'll report more!
1. ZIP wouldnt install through TWRP (error: to Edit later) (deleted System/Data/Cache Stuff, from Android 9), so unpacked payload.bin, and flashed manually in fastboot from stock 9.
2. One permission which is needed for MicroG with Playstore (no gapps) I think something like certificate/signing spoofing is missing. (Specify later)
Besides that feels quite stable, safety net passed with opengapps/magisk, can comfirm wifi, camera, sound works. Noticed nothing wrong, will test more today, right now writing in this Rom!
Someone asked for antutu Benchmark? Could not run it, inside the tutorial the "which OS are you using" wasnt clickable, probably because off the app itself? But:
3D Mark
853 points - my A2 Lite LOS 17.1 > 56% than other A2 Lite's
(Average)