Develop Bugs

[ROM][SGH-I317 / T0LTEATT[4.4.4][UNOFFICIAL] OmniRom 4.4.4 - Builds of opportunity

As many of you know the GSM Note 2 is supported by Team OmniROM in a unified build format. This work is inspiring to me as the team split from CM for altruistic reasons. I have come to consider OmniROM my AOSP branch of choice due to their philosophy toward security and development.
I see a niche for our community where some of our members may be uncomfortable utilizing the unified build for any number of reasons.
My product is no more than a straight source built t0lteatt build as the OmniROM spec is drawn up for the t0lte and adapted by the t0lteatt spec on the OmniROM github. All source is available at the OmniROM git. I make no changes unless noted (in the remote chance that changes occur they will be documented/git referrenced).
I make no promises or warranty of any kind, all flashing is done at your own risk and should not be thought to be the responsibility of anyone other than the person deciding to flash the ROM. While I will attempt to help you work through issues, I do not plan on integrating non-Omni commits or "fixes" with very few exceptions. If it is broken in the unified build it will be broken in this one as well.
I plan on putting up new builds weekly if not a bit more frequently if I am inspired. If I see a change in OmniROM commits that looks promising I expect that I would post a new build. Getting to the point where stuff wasn't broken took some serious banging of the head.
Flashing instructions:
Using the most current TWRP, ClockworkMod, or PhilzTouch recovery; wipe data, system, cache, and dalvik (especially if coming from a different ROM).
Flash the unofficial OmniRom .zip file from the link below
Flash the gapps of your choice (CM or PA are good)
Boot phone and let sit on a stationary flat surface.
Do not touch the device for 10 minutes to allow the caches to build.
Reboot the device and set up
omni-4.4.4-20150323-t0lteatt-COUGMADE.zip
omni-4.4.4-20150313-t0lteatt-COUGMADE.zip
omni-4.4.4-20150224-t0lteatt-COUGMADE.zip
omni-4.4.4-20150206-t0lteatt-COUGMADE.zip
omni-4.4.4-20150107-t0lteatt-COUGMADE.zip
omni-4.4.4-20150101-t0lteatt-COUGMADE.zip
omni-4.4.4-20141220-t0lteatt-COUGMADE.zip
omni-4.4.4-20141216-t0lteatt-COUGMADE.zip
omni-4.4.4-20141208-t0lteatt-COUGMADE.zip
omni-4.4.4-20141014-t0lteatt-COUGMADE.zip
PA Gapps (good variety of options)
All source code for OmniROMis available in the OmniROM Github.
OmniROM t0lte git
OmniROM t0lteatt git
DonkeyCoyote Samsung Vendor git
Props and credit to:
The OmniROM team.
UtkarshGupta for providing advice in working through build issues on compiling OmniROM and maintaining for t0lte.
Rmanne for assistance in getting my previous efforts in getting the unofficial CM ROM running by help with troubleshooting the build process.
And certainly not least mattlowry for being solid from his first posts in the doubleshot community, evolving along with weekendsR2short to porting for the doubleshot, and elevating his game on the Note 2. His advice and example made the unfathomable become doable.

Mine
10/14/14 - I know the camera is a bit weird with how it won't connect after a while. This is present in the unified build as well.

Thank you for this! my Att Note 2 is far from dead and the way Att and the other "Providers" want to charge for every single little stinkin' thing.. (A 40$ SmartPhone charge from ATT? NO WAY) is ridiculous I plan to make this phone last quite a while if possible and folks like YOU and stuff like THIS make that possible! Thank you sir!

This type of thing is my way of giving back to the community and developing my understanding of the software we rely on.

does tethering work with this rom?

Main Difference From OmniROM
I have installed both OmniROM and this variant but I can't tell the difference. Can you explain?
Thank you very much in advance.

fresnogamer said:
I have installed both OmniROM and this variant but I can't tell the difference. Can you explain?
Thank you very much in advance.
Click to expand...
Click to collapse
The only difference is this is built from source with the I317 build prop baked in from the start. It is nothing earth shattering. Some folks really prefer a ROM built for the specific model they use.

New build is up. Still KK.

i cant install it... Status 7 , installation aborted
Edit: I installed the newest TWRP recovery and it worked ... thanks a lot, i'll be trying this ROM
Edit 2: Lost root access?

New build is up.
EDIT: I pulled the DL link as the build was broken.

New build is up.

New build is up.

Change log?
Coug76 said:
New build is up.
Click to expand...
Click to collapse
Forgive my ignorance if I am missing it.
Is there a change log indicating updates between releases?
Awesome Rom BTW.

parakleet said:
Forgive my ignorance if I am missing it.
Is there a change log indicating updates between releases?
Awesome Rom BTW.
Click to expand...
Click to collapse
omni.cmxlog.com/4.4/t0lte/

Coug76 said:
omni.cmxlog.com/4.4/t0lte/
Click to expand...
Click to collapse
Cold Blooded
THanks

Happy New Build!

Coug76 said:
Happy New Build!
Click to expand...
Click to collapse
This one did not like a dirty flash.
Clean flash worked well though.

parakleet said:
This one did not like a dirty flash.
Clean flash worked well though.
Click to expand...
Click to collapse
Thanks for the feedback.

New build is up.

New build is up.

Unofficial Dirty Unicorns v 10.6, Marshmallow 6.0.1 (9-11-16)

About Dirty Unicorns:
Dirty Unicorns is a project that started out with no name. It was a project that was first based off AOKP back in the early days of Jelly Bean. In the early days it was just a one man show on one device, the EVO 3D. Since then, many others have joined the project and it has grown exponentially.
We have seen a lot of talent contribute to this project of ours. Big or small, the focus was always on contributing to the community. That is ultimately why we do what we do. After Jelly Bean, we decided to move to a new base, OmniROM. While AOKP was fun, OmniROM proved to be even more exciting base because it challenged us to see what we could do with a project that had different goals in mind. We learned a lot and again, gain contributors. With Lollipop, we moved to an AOSP base with a lot of patches from CAF to make our older devices function as they should. We grew even more and learned a whole lot more.
It has been an awesome learning experience and is still not over! We are still learning every day and continue to move forward. Lastly, we DO NOT accept, nor ask, for donations. We don't believe in that. Everything that is necessary to keep this project going is out of our own pocket. Gerrit, Jenkins, Websites, Devices, etc. We will never ask for a dime. All we do ask, is that you have patience, search, read and try to enjoy the process with us!!
Flashing Instructions:
- Verify that you're using the latest version of TWRP
- Perform a FULL WIPE as described below if coming from another ROM or a different version of Android
(A full wipe is when you wipe system/data/cache)
- Flash the latest version of this ROM
- If desired, flash Khaon's partition resizer, http://forum.xda-developers.com/nexus-10/development/mod-reclaim-free-space-partition-t3029605
- Flash GAPPS of your choice. (OpenGapps micro worked for me, http://opengapps.org/)
- Reboot and ENJOY!!
**If you fail to follow these instructions, please don't bother reporting any bugs**
**If you use Xposed, please don't bother reporting any bugs**
**If you use another kernel, please don't bother reporting any bugs**
Kernel Source: https://github.com/DirtyUnicorns/android_kernel_samsung_manta
This is an unofficial build of Dirty Unicorn's v.10.4, current 6.0.1 marshmallow rom. I will do my best to keep this current until Mazwoz returns or a current, official dirty unicorns is released for the N10.
Downloads: https://www.androidfilehost.com/?w=files&flid=60771
(edit to change download location to AFH folder)
XDA:DevDB Information
Unofficial Dirty Unicorns, ROM for the Google Nexus 10
Contributors
garnet&gold
Source Code: https://github.com/DirtyUnicorns
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Testing
Created 2016-05-21
Last Updated 2016-09-11

Reserved

Thank you so much. My big mantra was really missing some DU love. You are the man.
Sent from my Nexus 6 using XDA Premium HD app

Very nice job. It is running very smoothly and so far all is working as it should. Thank you once again.
Sent from my Nexus 10 using XDA Premium HD app

glockman4519 said:
Very nice job. It is running very smoothly and so far all is working as it should. Thank you once again.
Sent from my Nexus 10 using XDA Premium HD app
Click to expand...
Click to collapse
You're welcome. The credit all belongs to DU. This is their work, I just compiled it for us while they are busy.

This is copied over from the Google+
Oh no.
Seems to have taken one of them sleeps o' death. Kid was watching YouTube and turned off the screen via power button. Came back to it a bit later and nothing. Held power and it rebooted with sixty some percent battery. 

hottcakes said:
This is copied over from the Google+
Oh no.
Seems to have taken one of them sleeps o' death. Kid was watching YouTube and turned off the screen via power button. Came back to it a bit later and nothing. Held power and it rebooted with sixty some percent battery. 
Click to expand...
Click to collapse
Was this a clean install? are you running xposed or any other tweak? Are you using any themes?

garnet&gold said:
Was this a clean install? are you running xposed or any other tweak? Are you using any themes?
Click to expand...
Click to collapse
Definite clean install. When switching Roms I wipe everything except internal storage. Never xposed, and I run the unicorn blood on every available device. No themes either as I try to make sure all is stable.
OG moto x some ROM with the klear Kat theme is a no go.
I know the rules. I'd get a log cat, but is that possible if it sleeps like that?

hottcakes said:
Definite clean install. When switching Roms I wipe everything except internal storage. Never xposed, and I run the unicorn blood on every available device. No themes either as I try to make sure all is stable.
OG moto x some ROM with the klear Kat theme is a no go.
I know the rules. I'd get a log cat, but is that possible if it sleeps like that?
Click to expand...
Click to collapse
This sounds like a rogue app. I would use better battery stats or a wakelock detector to see if anything is running rogue. It may have reset itself after the reboot. So, you may not see anything currently. I can say it's running perfect on my N10 and with at least 10 other downloads and no issues similar to yours, I'm guessing it's localized to your tablet. If you still have a problem I would grab a new download, verify the md5, and clean install.
I'm not sure but I believe you can get a logcat either thru fastboot or right after reboot.

garnet&gold;66962482 said:
You're welcome. The credit all belongs to DU. This is their work, I just compiled it for us while they are busy.
Click to expand...
Click to collapse
I completely understand. But since I can't do it myself, without you compiling it, I wouldn't have the latest DU on my Bacon.... So for that I thank you. And so do a lot of other people. Good ...

glockman4519 said:
I completely understand. But since I can't do it myself, without you compiling it, I wouldn't have the latest DU on my Bacon.... So for that I thank you. And so do a lot of other people. Good ...
Click to expand...
Click to collapse
Thank you! I appreciate the kind words.
I hope you meant Manta. [emoji12]

garnet&gold;67019019 said:
Thank you! I appreciate the kind words.
I hope you meant Manta. [emoji12]
Click to expand...
Click to collapse
I was just getting ready to edit my post. Lol. I have too many devices. Not!!!.lol.. I meant Manta.

Hi! Can't access download.. Does the link work for you?

Jedi21 said:
Hi! Can't access download.. Does the link work for you?
Click to expand...
Click to collapse
AFH may be down. I will check again later if it's still down then I'll post a link for the rom in a different host. I will not have an chance to look into this until this afternoon.

Seems like AFH is back up if anyone is still waiting.

DU performs great and battery life is very good on Manta. I'm very happy with this build.
Thanks for sharing. :good:

I've been trying to flash this all evening. I continue to get an error flashing gapps. It keeps telling me there is insufficient space for the gapps. I was able to get one older set to flash, but FCs on the start-up wizard. Any thoughts?
Sent from my Nexus 5 using Tapatalk

jblaylock said:
I've been trying to flash this all evening. I continue to get an error flashing gapps. It keeps telling me there is insufficient space for the gapps. I was able to get one older set to flash, but FCs on the start-up wizard. Any thoughts?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Sounds like you need to flash Khaon's resize zip. Flash rom, then khaon's partition resize zip (link in op but also within this forum) , then gapps (opengapps micro is what works for me), then reboot.

new build is uploaded. link to AFH folder in op.

Clean flash with open gapps nano worked flawless...up and running buttery smooth. Thanks for your work. ☺

[Testing]Cyanogenmod 13 - Unofficial

Hey guys,
I've just managed to make a build of Cyanogenmod with lots of help by a guy called sultanqasim (actually he did most of the work), thanks a lot bro
Probably it's very bugy. Let's call it Pre-Alpha. Anyway, the build is ready and I need guys who'd like to try it out.
I chase GDrive for the first CM build. All Beanstalk builds are uploaded to the official Beanstalk AFH.
Currently working:
Display
WiFi
Bluetooth
Sensors
Audio through bluetooth
NFC
Broken:
Audio through built in speakers or headphones
RIL
Camera
Mic
Various other smaller things
Some Sprint users also report that it doesn't work for them. Just try it out if you like. Every tester's report takes the project a bit closer to stable builds.
Download Cyanogenmod (GDrive)
Download Beanstalk (AndroidFilehost)
To flash it:
in TWRP, reformat the userdata partition as unencrypted ext4. Go to Wipe->Advanced Wipe, select data, click on repair or change filesystem, change file system, and choose ext4.
in TWRP, go to Wipe -> Advanced wipe, and erase system, data, dalvik, and cache
flash the file by pushing it to your sdcard or you can use adb sideload. Also you can flash GApps optionally.
reboot into the system
Looking forward to your reviews. Thanks a lot
Good luck to all of you
Remember: I'm not responsible for anything that could happen as a result of following my instructions or anything else.
XDA:DevDB Information
[Testing][ROM] Cyanogenmod 13 - Unofficial, ROM for the HTC 10
Contributors
krassermensch, sultanqasim
Source Code: https://github.com/sultanqasim
ROM OS Version: 6.0.x Marshmallow
Based On: Cyanogenmod
Version Information
Status: Testing
Created 2016-06-10
Last Updated 2016-07-13
If you like my work consider a donation to support me in financing computer-components which are meant to replace the defect ones in my broken PC.
If you donate you'll donate to my father who will gimme the money. Thank you really much!

Nice!

Moderator Information,
Thread re-opened to allow OP to upload file on XDA host.

Can't wait for CM13 on this phone. I know Squid2 has been a ton of work into this, from what I know, already a solid month behind the scenes.

device boots up? display?

thought this thread was closed till a download link was posted...
i don't seem to find any link or me gone blind lolll
edit:- just read that its opened for uploading the link so it seems upload is in progress

Maybe change the title with correct spelling of " Unofficial "

We've had a booting and partially working version of CM13 for a while now, it's posted by @squid2 somewhere in the guides and discussion thread. Which, makes me wonder, with all due respect, how this is any different from that build?Have there been any fixes to the broken things on that ROM (most of the radio, for example) that warrant this being a separate version of CM13?

psych0r3bel said:
We've had a booting and partially working version of CM13 for a while now, it's posted by @squid2 somewhere in the guides and discussion thread. Which, makes me wonder, with all due respect, how this is any different from that build?Have there been any fixes to the broken things on that ROM (most of the radio, for example) that warrant this being a separate version of CM13?
Click to expand...
Click to collapse
i guess we would need to wait for the upload to be finished to see if its any different or the same as the Op doesn't seem to be much of responding to any comments

@krassermensch - Can you give us a list of what is and isn't working in your experience, at least?

psych0r3bel said:
We've had a booting and partially working version of CM13 for a while now, it's posted by @squid2 somewhere in the guides and discussion thread. Which, makes me wonder, with all due respect, how this is any different from that build?Have there been any fixes to the broken things on that ROM (most of the radio, for example) that warrant this being a separate version of CM13?
Click to expand...
Click to collapse
Hey, squid2 is the guy I named sultanqasim in the first post of this thread as sultanqasim is his GitHub name. I managed to build Cyanogenmod with his help and his sources. He's the main developer. I'm just trying to make a more current build for those who'd like to have one. As a result my builds are based on his latest commits. I'm just the one who did minor patches which aren't as relevant as the ones squid2 performed. He's the more experienced one of us. You should treat me like a maintainer and him like the main ROM developer.

krassermensch said:
Hey, squid2 is the guy I named sultanqasim in the first post of this thread as sultanqasim is his GitHub name. I managed to build Cyanogenmod with his help and his sources. He's the main developer. I'm just trying to make a more current build for those who'd like to have one. As a result my builds are based on his latest commits. I'm just the one who did minor patches which aren't as relevant as the ones squid2 performed. He's the more experienced one of us. You should treat me like a maintainer and him like the main ROM developer.
Click to expand...
Click to collapse
Hah, thanks for clearing that up - good to know. Didn't mean to attack you, just asking the questions trying to keep it all honest. So should we assume his working/not working list applies here?

psych0r3bel said:
Hah, thanks for clearing that up - good to know. Didn't mean to attack you, just asking the questions trying to keep it all honest. So should we assume his working/not working list applies here?
Click to expand...
Click to collapse
Don't mind. I really want to let everyone know that the main work was made by sultanqasim as I'm not willing to steal anyone's work. I just want to provide a more current build of his work to the community. Assume some minor things have already been fixed but it's probable that you'll experience camera, nfc, radio... issues here as well... I also hope this'll be fixed soon

I'm really glad to see this coming along! Keep up the good work. I'm not much of a tester normally but I think Im going to give it a shot later tonight and let you know what issues I can find.

krassermensch said:
Don't mind. I really want to let everyone know that the main work was made by sultanqasim as I'm not willing to steal anyone's work. I just want to provide a more current build of his work to the community. Assume some minor things have already been fixed but it's probable that you'll experience camera, nfc, radio... issues here as well... I also hope this'll be fixed soon
Click to expand...
Click to collapse
So glad to see the credits given, and insight to what testers will find.
Didn't want to see any drama, I thanks for putting the time in and squid for laying these ground work!
Sent from my HTC 10 using XDA-Developers mobile app

@krassermensch, thanks for your efforts but... If you're going to publish his work, how about updating the OP with his bug list and the title with pre-alpha. Just so users have more information, instead of the vague "it might be buggy". We know its buggy. Specifics about what works and doesn't is what people would like to know.
This still accurate?
squid2 said:
Currently working:
Display
WiFi
Bluetooth
Sensors
Audio through bluetooth
Broken:
Audio through built in speakers or headphones
RIL
Fingerprint sensor
Camera
Various other smaller things
Click to expand...
Click to collapse

Moderator Information,
Thread has been moved to general, as the OP is only hosting the work for another user.

Hi, I flashed your rom with the open gapps, booted up and connected to wifi and logged in through google. I don't have any cellular connection though. I am making a nano back-up of this and going back to stock until I figure out the cellular connection. Let me know how I can help or report bugs to you.

matteosaeed said:
Hi, I flashed your rom with the open gapps, booted up and connected to wifi and logged in through google. I don't have any cellular connection though. I am making a nano back-up of this and going back to stock until I figure out the cellular connection. Let me know how I can help or report bugs to you.
Click to expand...
Click to collapse
I think the RIL is not working yet which is what you need for the cellular connection. This definitely needs more work before its useable. But really good progress to date.

rav101 said:
I think the RIL is not working yet which is what you need for the cellular connection. This definitely needs more work before its useable. But really good progress to date.
Click to expand...
Click to collapse
Sweet. I can test more at nights when I am at home. Doing the nanodroid now of this build.
---------- Post added at 09:17 PM ---------- Previous post was at 08:52 PM ----------
question, I am trying to go back but I am getting the failed to mount '/system' (invalid argument), any tips on how to bypass that?

my roms

I decided to move my stuff here
These roms are for testing purposes. Some of them will eventually become officially maintained but I felt like testing them now. Why not not share. Which is why I'm not sharing in roms and development thread. For a few reasons du is not going official which is why I don't care what happens. I'm going to maintain a modded version and venture out from stock du and have some fun with it.
I don't mind helping but it's getting out of control. Every other pm is can I have ur trees can you make this rom can you help me compile. That's all fine and dandy but I'm not going to build a rom that I personally wouldn't use. Nor am I your personal building machine I do this for fun. Google, google, google, YouTube, YouTube, google, stack flow, Gerrit, GitHub. Words of a wise man. Use those and read, watch tutorials, and learn guys. Everybody has a life as do I. I'm not gonna say I don't drive some people nuts (coughs) nepo rood lol ur the best. Jay, Brian, razor u guys to. But I had some experience and will to learn that being said I'm gonna leave some links for tutorials on how to compile while the videos aren't for our device the setup is the same so u guys will have a idea on what to do. And I'm not saying I won't help I have no issues with that. But like I said I'm not going to build for u
Guys I do this for fun I don't get paid for it. Request will be ignored until my project is stable. I am not adding any features to ROMs that aren't mine, dirty unicorns I will soon start adding things I like. but on my own time and terms Directions for all my ROMs are pretty much the same. So I'm not sure why there are issues. My ROMs are always pretested by a few guys on my team before released. I use official gapps and data tool hasn't been updated by open gapps which is cause for error on first boot. Not my fault so if u use open gapps expect it. Try razorloves. The vendor/overlay folder should be deleted so it doesn't conflict with substratum and is only necessary if you are into themes especially dark overlays. So I'll share exactly how we flash so there is no issues.
Boot to recovery make sure u are slot A.
Wipe everything except internal storage.
Flash rom and twrp reboot to recovery.
Flash gapps and vendor.
Mount vendor.
Erase overlay recommended but not necessary if u don't use substratum.
Reboot and enjoy ur ice cream
There are some great tutorials for flashing mods on these forums so search there for further help.
A few of my backup apks and latest magisk zip
https://drive.google.com/folderview?id=1pcSoINLpHuIINuAXGS99jPoc4_njRsvH
To root
Reboot to recovery and flash latest magisk..... Good to go
I am using my own version of twrp but version 3.2.0
Gapps
http://opengapps.org
Vendor. Always the latest
https://drive.google.com/folderview?id=11Tw8IOqCALXnbwJQX9pIv7GI7PzKi1uJ
Twrp
https://drive.google.com/file/d/1rjq45DJEHoyGtth5QIXGsYX1eDYGbp_7/view?usp=drivesdk
I will not spoon-feed you don't ask me to compile ur favorite rom. I'm getting to the point im done with xda. so before u go on a tangent and cry to ur mother that I'm to fault for breaking ur device I wrote all the directions in plain English. Good luck I wouldn't post anything that hasn't been tested by me or anybody I work with. Thanks

Roms
Aokpizzel
https://androidfilehost.com/?w=files&flid=256600
Dirty
https://androidfilehost.com/?w=files&flid=253242
Aicpizzel
https://androidfilehost.com/?fid=746010030569961451
Links to be moved soon
3/28 aicp,du,lineage mod updated check link above
3/22 aicp updated validus completed cosmic completed will share those later
3/20 mokee added du updated
3/19 aicp updated

Tutorials
Setup enviorment for Mac
https://eboye.github.io/AICP-OTA/build-on-mac.html
Videos
.
Nevermind the rom he's building watch how he builds he also has a bunch of other videos
https://www.gadgetdaily.xyz/build-roms-from-source-with-architekt/

Any chance at getting these in sailfish? Or possibly a link to your github so we can try building these as well?

These ROMs are rock solid,daily drivers and Aokp smoother than DU,sorry ocd!Your man,keep up great work!

petiolarissean said:
These ROMs are rock solid,daily drivers and Aokp smoother than DU,sorry ocd!Your man,keep up great work!
Click to expand...
Click to collapse
Did you have to flash Gapps and vendor on each or are they included?

Soooperstar said:
Did you have to flash Gapps and vendor on each or are they included?
Click to expand...
Click to collapse
You need gapps and vendor

Aicp is on my androidfilehost for testers havent had chance to test but it compiled fine use march vendor

joeeboogz said:
Aicp is on my androidfilehost for testers havent had chance to test but it compiled fine use march vendor
Click to expand...
Click to collapse
It runs great and I love the features

joeeboogz said:
Aicp is on my androidfilehost for testers havent had chance to test but it compiled fine use march vendor
Click to expand...
Click to collapse
Question, how often will u be updating aicp? I loved this rom on my n6.

scoonie said:
Question, how often will u be updating aicp? I loved this rom on my n6.
Click to expand...
Click to collapse
Whenever a update is needed

joeeboogz said:
Whenever a update is needed
Click to expand...
Click to collapse
One thing about aicp which I love, is that, they update daily

Flash march vendors IMG. Then flash 20181440 nano open gapps.These gapps seems to work with all 8.1 ROM consistently.Others don't and google camera works and pixel mod cameras too,Sean

Thank you for sharing!!

One more trick make things Easiest.
Run google play services apk after flashing gapps.Then phone with start notifing you that google services needs to be update and play store will bootup and not hang,sean

Fat kid in a candy store ?...

Aicp du

Thanks for these! Running through them all today
I cannot get AOSIP to boot. AICP, AOKP, DU and XHD all good.:good:

Do any of the RoMS not have aosp bloat? Gallery, messages,

LubbocksFall said:
Do any of the RoMS not have aosp bloat? Gallery, messages,
Click to expand...
Click to collapse
You can handle that with OpenGapps. My installs have removed all of that (if any of that is there).

ROM ❯ PIXEL 3a ❯ UNOFFICIAL ❯ ProtonAOSP 11

ProtonAOSP • Pixel 3a
Android 11 ROM​
ProtonAOSP is a minimal custom Android 11 ROM focused on UI/UX and performance, with a touch of privacy.
Instead of customization it is focused on more smoother experience.
Installation
1. Unlock Bootloader
2. fastboot flash boot boot.img
3. Reboot to factory and factory reset
4. adb sideload rom.zip
5. Reboot​Note:- Rom already comes with gapps included so no need to flash them
Code:
- Your warranty is now void.
- You have been warned.
- Use at your own risk.
Download Here​Known issues
No eSIM support(I plan to add in next build)
Join the Telegram group for support
Kernel source code
ROM source code
This is just a side project, I may or may not maintain it in future.
A huge thanks to @kdrag0n for the amazing rom and the work done on this rom.

Reserved

I was just thinking how much I'd love to see this for the 3a.
Couple of things though;
1) Where's the device tree source and vendor blobs?
2) Its unfortunate that you baked in the google crap, one of the great things about custom builds is to get rid of that.

96carboard said:
I was just thinking how much I'd love to see this for the 3a.
Couple of things though;
1) Where's the device tree source and vendor blobs?
2) Its unfortunate that you baked in the google crap, one of the great things about custom builds is to get rid of that.
Click to expand...
Click to collapse
1. Soon I'll push source
2. I do have microg build for sargo as it is my main device, but not for bonito, so I did not post here on xda, if you want it join the support link group in the thread. Regarding google crap, for some users flashing gapps externally had less fluid experience so I did it.

I hope soon will be very soon, since I'm only interested in building myself anyway.
Have you spoken to @kdrag0n about adding in your source and making this "official"?

96carboard said:
I hope soon will be very soon, since I'm only interested in building myself anyway.
Have you spoken to @kdrag0n about adding in your source and making this "official"?
Click to expand...
Click to collapse
Device source
Vendor Source
Note:- I have few extra proprietary stuff added in vendor for Google Fi and stuff to work for users out the box which lineage does not have added in their vendor, so if you really want less vendor blob use lineage vendor. It will work without any issue, I think kdrag0n also uses them.
Regarding official builds, I don't have the same infrastructure as him(reason why I only posted gapps build here, it takes lot of time to maintain both gapps and non gapps build) nor the time to maintain it officially. as said in thread, this is my side project which I thought to share it with community. If things work well in future and I feel like doing it official, I may ask kdrag0n. Also idk if he is accepting new device as he is maintaining all the official devices alone by himself.

FoxA said:
Device source
Vendor Source
Note:- I have few extra proprietary stuff added in vendor for Google Fi and stuff to work for users out the box which lineage does not have added in their vendor, so if you really want less vendor blob use lineage vendor. It will work without any issue, I think kdrag0n also uses them.
Regarding official builds, I don't have the same infrastructure as him(reason why I only posted gapps build here, it takes lot of time to maintain both gapps and non gapps build) nor the time to maintain it officially. as said in thread, this is my side project which I thought to share it with community. If things work well in future and I feel like doing it official, I may ask kdrag0n. Also idk if he is accepting new device as he is maintaining all the official devices alone by himself.
Click to expand...
Click to collapse
Thank you very much. I'll give that a go

Hi, just checking if there is any development planned for this one? Looks to be interesting ROM for daily use.

cichy63 said:
Hi, just checking if there is any development planned for this one? Looks to be interesting ROM for daily use.
Click to expand...
Click to collapse
sorry, I don't have the device anymore.

The link download is not working, please update it

cichy63 said:
Hi, just checking if there is any development planned for this one? Looks to be interesting ROM for daily use.
Click to expand...
Click to collapse
Here's a current source.
I don't know if it's trusted, or who the maintainer of this unofficial build is though. Just found it via telegram.
ProtonAOSP - Browse /ProtonAOSP at SourceForge.net
sourceforge.net

Nice one. It's really handy to be able to revive old, unsupported devices like the Pixel 3a, which is a perfectly usable phone and can be picked up for next to nothing.
Some of us don't care about de-googling our phones and really just want to extend their lifespan with security updates, so having gapps baked in to ProtonOASP is really nice. Especially when we're just trying to help out our non-technical friends get a bit more life out of their old phones. A consistent, familiar user experience is all they really want.
I was wondering though: Does your build (or any build of ProtonOASP) come with verified-boot signatures so that the device's bootloader can be locked down after the ROM is installed, or is CalyxOS the only option for this?
Unfortunately, Calyx are very puritanical when it comes to de-googling, and microG is just a terrible substitute for interacting with Google services. I tried it on the Pixel 3a, and it doesn't even sync the contact list from your Google account. My non-technical friend was not impressed.

GrapheneOS still has builds up for 3a, however new builds were terminated as of February. While it doesn't ship with gCrap preinstalled, installation is trivial as they've built a compatibility layer to make it work correctly (and much MUCH more securely) as user-installed software, which you can install from the program "Apps".