Related
Guys,
My Evo says Froyo 2.2 is avail for download when I check HTC Updates... I hit accept, it downloads, then asks if I want to install NOW... I HIT YES, and it takes me to the boot loader page, THEN DOES NOTHING.. It doesn't boot into recovery mode like it is supposed to, and it just sits on the Boot loader screen, NO TRIANGLE, NO BAR on the bottom showing the progress, IT JUST SITS THERE on the boot loader page with the 3 Androids on the bottom... I have already tried to hard reset the phone, BUT that didn't work... PLEASE HELP !!! Is there a way to HARD reset my EVO BACK to BEFORE ALL OF THE UPDATES??? IS THERE A WAY TO Force boot into recovery to apply the "update.zip" ??? Please advise...
Mine did'nt go no where near the bootloader screen...
I hit the download...then it just installed like any other app...except it brought me to a bar progress page a couple of times. Then the phone rebooted and whala...froyo.
I must say this...I was previosly rooted but unrooted to do it!!!
Are you rooted or unrooted to start off with?
Was rooted, but then I did the "update of June 29th" and ruined ALL of my fun... Is there even a way for me to root my phone now??? How do I get it to go into recovery?
Same issue
My EVO ISN'T ROOTED, and I'm having the same exact problem
You're hosed root wise until someone cracks the rom, if they crack the rom. Most likely you'll need to update to the official version once HTC releases an upgrade as they claimed they would eventually do on Twitter.
im not trying to root my phone, i just want froyo
right, I WAS rooted, the update in JUNE fixed that for me =(... NOW I just want FROYO which is available from Sprint/HTC OTA, it just wont install?????????? I think I can install it as an update.zip if I could get my phone into RECOVERY mode... When at the bootloader, if I hit Recovery, it just boots back to the BOOT LOADER????
I would suggest using this unroot program and make sure you use the 1.47 one because there are 3 different roms. This is what I did as I had the june update as you. This will guarantee that you have the right stock rom and are not rooted. Then try the update again...
http://forum.androidcentral.com/htc-evo-4g-roms-hacks/19278-how-unroot-return-stock.html
This is the route I took and was just like you...I had no probs this way!
This is a great recommendation, but I haven't done any ROOT or ROMing to my phone since I've owned it, I've stayed true to the true image they released, and I'm not comfortable downgrading it to some other image that wasn't on the phone. I attempted to do the instructions outlined and I was unable to get pas the stage of pushing the:
RUU_Supersonic_1.47.651.1_Radio_2.05.00.06.10_release_CL195459
to the phone. It says USB error, and I have debugging mode enabled.
cardiox said:
I would suggest using this unroot program and make sure you use the 1.47 one because there are 3 different roms. This is what I did as I had the june update as you. This will guarantee that you have the right stock rom and are not rooted. Then try the update again...
http://forum.androidcentral.com/htc-evo-4g-roms-hacks/19278-how-unroot-return-stock.html
This is the route I took and was just like you...I had no probs this way!
Click to expand...
Click to collapse
I RE-Loaded this version, as the other "older" versions would not work (re-loaded, as this is what I already HAD on my phone)... It wiped the system, and ALL of my info/apps (make sure you back up) and then I was able to do the Froyo Update... YES !!!! Thanks...
http://shipped-roms.com/shipped/Sup...51.1_Radio_2.05.00.06.10_release_CL195459.exe
I did the same, thank you !
No prob...have fun!!!
Froyo Update Won't Install
To start off - I have never rooted my evo - my phone is running Android 2.1 update 1 supersonic - and I did not try to do the "pre-release" update put out by HTC. Since late last night, I have been trying to install Froyo through system updates (settings, system updates, htc software update). I am able to download the upgrade, which is about 80 MB, but for some reason the update will not install. When I click install now, my phone restarts in the bootloader. If I click on fastboot, it searches for an image on my SD card but can't find one. If I hit recovery, it just returns me to the main bootloader screen. The only thing I can do is reboot or shut down my phone. When my phone boots back up, it says the update is downloaded and ready to be installed. I have tried redownloading the update but the same thing happens. Any help would be appreciated, preferable without losing contacts and apps. I'm trying to save a factory reset for a last resort.
Thanks,
Nick
Nick,
Please read the earlier posts, and follow the link from Cardiox... He said the following...
"I would suggest using this unroot program and make sure you use the 1.47 one because there are 3 different roms. This is what I did as I had the june update as you. This will guarantee that you have the right stock rom and are not rooted. Then try the update again...
http://forum.androidcentral.com/htc-...urn-stock.html
This is the route I took and was just like you...I had no probs this way!"
Then read my posts, and you will see that I had the SAME problem you are having, and this worked for me... I posted the thread... It is pretty easy if you follow the instructions... Let me know if it works for you... Good luck !!!
wolverinexc said:
To start off - I have never rooted my evo - my phone is running Android 2.1 update 1 supersonic - and I did not try to do the "pre-release" update put out by HTC. Since late last night, I have been trying to install Froyo through system updates (settings, system updates, htc software update). I am able to download the upgrade, which is about 80 MB, but for some reason the update will not install. When I click install now, my phone restarts in the bootloader. If I click on fastboot, it searches for an image on my SD card but can't find one. If I hit recovery, it just returns me to the main bootloader screen. The only thing I can do is reboot or shut down my phone. When my phone boots back up, it says the update is downloaded and ready to be installed. I have tried redownloading the update but the same thing happens. Any help would be appreciated, preferable without losing contacts and apps. I'm trying to save a factory reset for a last resort.
Thanks,
Nick
Click to expand...
Click to collapse
I am not a genius by no means thus I am only sharing info that I have from personal trial and error. If you are going to a bootloader screen during this update process and your SD card is mounted then you most likely will need to bite the bullet and either do a factory reset or follow the link instructions so given. For some reason this update can not find the original factory code or RUU that it is trying to update. Sounds like your SD card is mounted but it can't find it...I would strongly consider just starting over with that link program. It does not root you it just puts you back square one with factory code. Then the update will have something to build off of...which you apparently don't have for whatever reason.
Ok, this is what I needed to know. I'm backing up my stuff with bitpim and will just do this. Thanks for all the help and the speedy responses!
-Nick
I have been passed a HTC Desire to try and fix after a friend of mine ran into issues trying to put Froyo on it. It was originally with Virgin (Virgin boot screen) but was not locked as other sims were usable.
I've tried various different methods to get it up and running but suspect something he has done with his attempts has caused serious issues - also he is not all that clued up and cannot remember exactly what he did - he did mention that RUU update failed, and also an image he had tried to flash from his sd card had got part way through and then locked up on the radio update.
With the original sim and memory card in, the phone will constantly reboot or just stick at the HTC logo. Take the memory and sim cards out, the phone will boot but system wont launch properly so cant get into settings to enable debugging so I can access the device via ADB. I can get to the fastboot screen, and to the Vol Down-Power screen on start, but if I select recovery it stays on HTC logo and goes nowhere.
I have managed to get HBOOT downgraded to 0.8, but when trying to put on original Virgin RUU it says the main version is older (probably because I'm trying to install an older version over a newer one). The stock Froyo RUU fails and tells me wrong HBOOT and sometimes gives a CID error. Although the phone is not locked, I suspect it will still need a goldcard, but cant create one as I cant get ADB access to the phone.
Sorry if this is a bit of a mess but at work and trying to take calls as well as write this and fix the darned phone. I;m not unfamiliar with methods used to get the phone rooted, but not well up on troubleshooting or working around these issues I have.
Any help would be appreciated.
You should be able to restore it by installing this RUU with a working goldcard:
http://shipped-roms.com/shipped/Bra...3.00.32U_5.09.00.20_release_140022_signed.exe
If you get a CID error your goldcard isn't working. There should be no version error with this.
Thanks for the reply....however how can I create a goldcard when I cant get the phone to a point where I can get my pc to recognise it? All the goldcard methods I have seen/tried involve having the usb plugged in and debugging enabled - cant get to that stage as phone wont boot - reboot loop most of the time and when I do occassionally get to the os it doesnt last, it will reboot after a few seconds. Anything else I could do? Or, could I use the card in other phone and create the goldcard in that and transfer over? I do have my own working Desire handset.
Don't know much about this but have read that a goldcard is unique to the SD card not the phone so you could create one on your phone and then use it in your mates. Also, from what I've read it would be worthwhile wiping your mates SD card (make sure he's not added a partition to it), copying a Rom to it, and try to install it using Rom manager (or whatever recovery program which was used to root the phone)
Ok, I used my own phone to sort out the goldcard and currently trying that out now...will keep you posted. Just started the RUU Stock Froyo and seems to have got further so far. Wish me luck!
Mmmmm....ok the RUU worked, but when it restarted (with original goldcard/memory card in, it kept rebooting. It did start once, got to initial setup then promptly rebooted. I swapped out the memory card (no sim in at all by the way at any point up to now) to my own card and after one final reboot it did start up. It doesnt seem stable at all with the original memory card, and still not entirely stable with my card. Could this be a phone fault? Im assuming if the RUU got through all its stages then all areas and files on the phone have been updated correctly and are all correct? Could past failures at updates etc have caused an issue elsewhere?
Have you wiped the various caches? As far as I can make out you need to make sure everything is wiped. I read a post on the OpenDesire thread which suggested that clockworkrom, if that is the recovery program you have installed, may not wipe one of the caches (possibly the dalvik cache) correctly. They recommended another recovery program called something like AmonRu. Although I can't really help you it might be worthwhile saying how the phone was rooted.
Ok, none of this was to root the phone. It was to debrand and put on the HTC Desire Froyo build. Not a custom rom, the standard RUU.
As far as I was aware, an RUU restore of the phone would wipe the appropiate caches, but correct me if I'm wrong. The phone now starts with the standard HTC startup and sound and for all intents and purposes is working, but just cant explain the random reboots. These seem to be worse with the 8GB card that my mate gave me with it. Although, after trying mine and putting the original one back in it seems to have stayed stable up to now. I'm beginning to wonder if there may be an issue with the memory card slot - another swap of the memory card again will probably trigger the reboots once more.
We will see how it goes anyway.
You've got a hardware fault. The RUU will completely reflash the phone, so if it flashed successfully but is still rebooting randomly, it can't be software.
Your probably right. Just started to try and do a downgrade, and after putting the PB99.IMG file on the gold card I made earlier, then starting the downgrade I noticed it stuck at about 98% on the radio update (second item in the list). I'm going to leave it a while to see if I get an error but I suspect it will not move or do anything.
Having gone through this process before on my own handset, I know it doesn't take anywhere near this long. Thing that confuses me though is that the RUU process I went through before went through with no issues - so why would that be able to successfully install a radio update and not this downgrade process? Anyone else had this happen to them?
Update: Ok, leaving this now as I've exhausted all avenues and its obvious the phone is not going to play ball. On another RUU flash it failed (and looking at the logs it was at the radio section and mentioned a partition update failure). A subsequent RUU flash was successful, so at least I've got it back to stock (although it doesnt stay booted long enough to even get the initial setup wizard done now). Passing it back to my friend tomorrow and hope he can get a warranty repair. Just a shame I couldn't get it back to the Virgin firmware. Thanks all those that helped anyway, much appreciated.
I've had my wife running custom roms but I'm tired of her complaining about somethings that seem strange... so I want to put her back 100% stock, including losing root and the latest HBOOT (so she loses NAND unlock as well). I honestly think something is wrong with her phone, which is why I want it back 100% stock so if it keeps doing funky things I can take it to Sprint. Her touchscreen is constantly losing responsiveness and the only way to get it back is to manually turn off the phone (with the power button), then turn it back on... also, her proximity sensor isn't working and she keeps hanging up the phone with her cheek...
Does anyone know where I can get a file for this? Thanks.
Also, if she decides, she hates it, is the latest OTA rootable yet?
Search button works
Its been posted a few times in the Dec section
from my phone duh
If I could find it, I would have. All I can find are modified ROMs. Thanks for nothing.
I think you can just go into your phone settings and do an update. (System update >htc software update ) and it'll bring the phone back to stock. It'll probably overwrite everything ....
Wow this was hard
http://shipped-roms.com/index.php?category=android&model=Supersonic
from my phone duh
those will kill root, but they wont turn S-OFF to S-ON. That would be a different thing entirely. Plus, those are the older roms. Would need to take the update after updating to those... just sayin.
Since unrooting it will wipe data anyways, why not try downloading a new rooted stock ROM, wipe your data/cache/dalvik-cache (each twice just to be sure) and then flash the new stock ROM and see if that helps. If not, then you can go ahead and proceed with unrooting and bringing the phone back to Sprint for replacement/repairs. Just thinking this might be easier than unrooting, updating with OTA, and then finding out you want to root it again later....but that's entirely up to you.
Good Luck
A colleague of mine has an incredible that every few days reboots into a continuous boot loop. It takes removing the battery for it to boot normally, and then a few days later it does it again.
He has tried a reset, and it doesn't fix the problem. This is an unhacked unrooted stock Incredible with what ever updates came from Verizon/HTC over the air.
I'm wondering if it would help to reflash it to virgin stock in case something is corrupted. In fact its also possible that one of the HTC updates caused the problems, since it seems to have started about the time of an update.
I have a Samsung phone and am familiar with the procedure for Samsung (Kies, Odin, etc) but don't know what to tell him about HTC.
What is the procedure for reflashing to stock, and perhaps selecting a stock version older than the latest for HTC phones?
kmandel said:
A colleague of mine has an incredible that every few days reboots into a continuous boot loop. It takes removing the battery for it to boot normally, and then a few days later it does it again.
He has tried a reset, and it doesn't fix the problem. This is an unhacked unrooted stock Incredible with what ever updates came from Verizon/HTC over the air.
I'm wondering if it would help to reflash it to virgin stock in case something is corrupted. In fact its also possible that one of the HTC updates caused the problems, since it seems to have started about the time of an update.
I have a Samsung phone and am familiar with the procedure for Samsung (Kies, Odin, etc) but don't know what to tell him about HTC.
What is the procedure for reflashing to stock, and perhaps selecting a stock version older than the latest for HTC phones?
Click to expand...
Click to collapse
You can reflash the phone to stock with what incredible users call an ruu (rom update utility), however flashing older versions or downgrading the os is not allowed with s-on (security on). His best bet in my opinion would be to root and s-off the phone, and then flash a custom rom. However if hes not into all of that he can try to do an ruu and see if it fixes things. Doing so will wipe the phone compleetly and he will loose all of his apps and data. A pc running windows xp or newer is required.
1. Download the ruu http://dinc.does-it.net/Stock_Image...0_Incredible_C_hboot_1.02.0000_4.08.605.2.exe, and place it somewhere on your pc.
2. Download and install HTC Sync http://dinc.does-it.net/HTC-Sync/3.0.5606/setup_3.0.5606.exe.
3. On the phone go to menu - settings - applications, uncheck fastboot if it is checked and then select development, and make sure usb debugging is checked.
4. Connect the phone to the pc with the usb cable, and wait for any drivers to install on the pc. The phone should be in charge only mode.
5. On the pc run the ruu file and follow the instructions it gives you.
If all goes well the phone will be like it just came from the factory. If doing all of this is to technical for him he can take it into a verizon store and they will do it for him at little or no charge.
cmlusco said:
If all goes well the phone will be like it just came from the factory. If doing all of this is to technical for him he can take it into a verizon store and they will do it for him at little or no charge.
Click to expand...
Click to collapse
Well not like it came from the factory originally. That would be Froyo, and this procedure would presumably get the last official (and maybe problem some Gingerbread). Is that right?
Also, I'm surprised to hear that a Verizon store could do a flash. My only experience is with T-mobile and they can't do any better than use the "factory reset" menu that just clears settings.
kmandel said:
Well not like it came from the factory originally. That would be Froyo, and this procedure would presumably get the last official (and maybe problem some Gingerbread). Is that right?
Also, I'm surprised to hear that a Verizon store could do a flash. My only experience is with T-mobile and they can't do any better than use the "factory reset" menu that just clears settings.
Click to expand...
Click to collapse
Well not like it originally came from the factory 2 years ago (with froyo), but if they were still selling them today or you get a replacement, that is how it would come from the factory. The last update 4.08.605.2 fixed all the major issues and shouldnt give any major trouble. The only other option would be to root.
Verizion is pretty good with customer service, you may have to find a knowledgable employee but they can do it for you.
We tried the "ruu" approach without success. The drivers installed on the PC, the phone goes into debug mode, and we can even run "adb" manually and talk to the phone. However, when either "ruu" or "Ht Sync" try to talk to the phone they just say the phone is not connected.
If we run the task manager on windows we can actually see "ruu" invoking "adb" and there is no long timeout. It appears that ruu just doesn't like the answers.
Again running adb manually for example with the shell option seems to do all you expect adb to do. This is with both the versions linked above and the updates they end up offering.
Any ideas?
OK, found a mistake. I didn't realize that to do the ruu flash I needed to turn off the phone and vol-down/power it into htboot mode.
With that done the update program sees the phone notices it has lastest firmware and offers to update it to the same version. I say yes, and the phone reboots and the PC tells me it will take 10 minutes to flash, then 2 seconds later tells me it succeeded and the phone reboots.
Obviously it did not flash anything. Am I missing something?
Also any pointers on how to flash an earlier stock rom (and where to find it)?
Disclaimer: This worked on my phone. I am not responsible if your phone turns into an expensive brick.
I know this isn't quite the update everyone was waiting for I managed to pull the 2.3.6 OTA files. I also managed to figure out how to flash them. Turns out CWM 5 offers root adb access, everything we need to update and root this phone. Note I tried CWM 6 but it said "possible loss of root" so apparently CWM 6 likes to reside on an already rooted phone.
Note this is not the most elegant solution. The most elegant would be a signed update.zip. The second most elegant would be something flashable with CWM or Odin. Too bad I don't know how to do those. I do know how to do this.
The first thing to do is make sure you are on the AT&T stock firmware. It doesn't matter if you've already flashed something else. No need to wipe cache or factory reset or anything (although if you run into problems you should try to do that step). Download it from samfirmware.com. Flash it with Odin. This will put you on stock 2.3.5. Even if you were already on 2.3.6, or rooted, or on Rogers, this will work. After the flash, boot the phone normally, wait a minute or so, and shut it down.
Now for the fun part. AT&T will not push the OTA to a non AT&T customer. The flash will also not work with a modified phone (hence the reflash to stock). How to gain root access to manually flash the OTA? If we install root, it will not install. If we install CWM, we will not have the stock recovery which is required to process the OTA. So...
How about this? We install CWM 5. You can find it here http://forum.xda-developers.com/showthread.php?t=1458153
Then we adb into the phone, and push the OTA files, and then reflash the stock recovery over CWM, and then manually reboot into OTA mode. That sounds crazy... crazy enough to work.
After you've flashed CWM, reboot into it and make sure your phone is still connected to your computer. We won't actually be using CWM, just the root access it provides over adb. Unzip the two zip files below (why use external hosting, I can store zips up to 11 MB on here) into a folder and run fota.bat. Ooo and ahh over your Gingerbread.
But what about root? Well, I posted in another thread a complicated method for rooting 2.3.6 using the root access from CWM, but how about easy? Boot your phone into 2.3.6 and let it sit for a minute or so, and shut it down. Reboot into Odin mode, and reflash CWM over the stock recovery (again). Copy the Superuser zip from the folder you made earlier to your SD card. Flash this with CWM. This is the beta of Superuser 3.2, courtesy of Rom Manager. Download the stericson busybox app from the Market if you want busybox as well.
This was a fun way to kill a weekend
Throws a signature verification failed error.
Try again with the new method
Had a few mild scares. After flashing CWM on stock, it refused to boot into it but after 3 tries and my screen acting up upon boot, it finally booted into CWM. Launched the bat file and it went well. Upon booting up and entering the update process, it froze up at 74% and refused to continue. Rebooted the phone and it once again entered the update process and this time it managed to finish. Phone rebooted and after checking "About phone", my phone is on 2.3.6 stock. When you initially provided the OTA files and the sig check failed, I had a good feeling this would be the only other way to do it as I tried to sign it and it also failed. Thanks for taking the time to post all of this.
Why go to 2.3.6? It´s better than 2.3.5 customized?
Better question: we're getting ICS within the month, so why bother with 2.3.6 when you can just upgrade to 4.x.x when it comes down?
-Ara
AraDreamer said:
Better question: we're getting ICS within the month, so why bother with 2.3.6 when you can just upgrade to 4.x.x when it comes down?
-Ara
Click to expand...
Click to collapse
Because there are some people who will want to stick with 2.3.5/6 . He made this so that those who do, can update to 2.3.6 even when they aren't with AT&T, almost hassle free.
narume said:
Had a few mild scares. After flashing CWM on stock, it refused to boot into it but after 3 tries and my screen acting up upon boot, it finally booted into CWM. Launched the bat file and it went well. Upon booting up and entering the update process, it froze up at 74% and refused to continue. Rebooted the phone and it once again entered the update process and this time it managed to finish. Phone rebooted and after checking "About phone", my phone is on 2.3.6 stock. When you initially provided the OTA files and the sig check failed, I had a good feeling this would be the only other way to do it as I tried to sign it and it also failed. Thanks for taking the time to post all of this.
Click to expand...
Click to collapse
When I was testing this, I saw that behavior if you didn't completely boot up the phone between steps (ie, flash stock firmware, boot phone, flash CWM, boot phone). I don't know what would cause it otherwise. Glad to see your phone made it.
narume said:
Because there are some people who will want to stick with 2.3.5/6 . He made this so that those who do, can update to 2.3.6 even when they aren't with AT&T, almost hassle free.
Click to expand...
Click to collapse
Actually I did it because I've owned this phone for exactly two weeks and discovered all the available ROMs are based on 2.3.5 even though 2.3.6 has been out since December. CWMR with root has been out since January, and since then nobody else has rooted 2.3.6 or found a way to flash it. And I thought, it couldn't be that hard? And even more amazed when I discovered CWMR comes with root out of the box, without even touching /system. The only other missing piece was the stock recovery, which also wasn't out in the wild. 3 birds for one stone
On a side note, if you want to do some cleaning after the OTA and you decide to root, you can delete /cache/fota and /data/fota safely.
Nardholio said:
Actually I did it because I've owned this phone for exactly two weeks and discovered all the available ROMs are based on 2.3.5 even though 2.3.6 has been out since December. CWMR with root has been out since January, and since then nobody else has rooted 2.3.6 or found a way to flash it. And I thought, it couldn't be that hard? And even more amazed when I discovered CWMR comes with root out of the box, without even touching /system. The only other missing piece was the stock recovery, which also wasn't out in the wild. 3 birds for one stone
On a side note, if you want to do some cleaning after the OTA and you decide to root, you can delete /cache/fota and /data/fota safely.
Click to expand...
Click to collapse
Ah, I see. Well, still, being able to flash to 2.3.6 is nice because if anyone ever decides to stick with 2.3.6 they can easily flash the update now. Maybe more people like you will pop up and start pushing out more useful content like this for the Glide so it won't be a dead area of development anymore.