EVO 2.2 UPDATE (Froyo), HELP !!! - EVO 4G Q&A, Help & Troubleshooting

Guys,
My Evo says Froyo 2.2 is avail for download when I check HTC Updates... I hit accept, it downloads, then asks if I want to install NOW... I HIT YES, and it takes me to the boot loader page, THEN DOES NOTHING.. It doesn't boot into recovery mode like it is supposed to, and it just sits on the Boot loader screen, NO TRIANGLE, NO BAR on the bottom showing the progress, IT JUST SITS THERE on the boot loader page with the 3 Androids on the bottom... I have already tried to hard reset the phone, BUT that didn't work... PLEASE HELP !!! Is there a way to HARD reset my EVO BACK to BEFORE ALL OF THE UPDATES??? IS THERE A WAY TO Force boot into recovery to apply the "update.zip" ??? Please advise...

Mine did'nt go no where near the bootloader screen...
I hit the download...then it just installed like any other app...except it brought me to a bar progress page a couple of times. Then the phone rebooted and whala...froyo.
I must say this...I was previosly rooted but unrooted to do it!!!
Are you rooted or unrooted to start off with?

Was rooted, but then I did the "update of June 29th" and ruined ALL of my fun... Is there even a way for me to root my phone now??? How do I get it to go into recovery?

Same issue
My EVO ISN'T ROOTED, and I'm having the same exact problem

You're hosed root wise until someone cracks the rom, if they crack the rom. Most likely you'll need to update to the official version once HTC releases an upgrade as they claimed they would eventually do on Twitter.

im not trying to root my phone, i just want froyo

right, I WAS rooted, the update in JUNE fixed that for me =(... NOW I just want FROYO which is available from Sprint/HTC OTA, it just wont install?????????? I think I can install it as an update.zip if I could get my phone into RECOVERY mode... When at the bootloader, if I hit Recovery, it just boots back to the BOOT LOADER????

I would suggest using this unroot program and make sure you use the 1.47 one because there are 3 different roms. This is what I did as I had the june update as you. This will guarantee that you have the right stock rom and are not rooted. Then try the update again...
http://forum.androidcentral.com/htc-evo-4g-roms-hacks/19278-how-unroot-return-stock.html
This is the route I took and was just like you...I had no probs this way!

This is a great recommendation, but I haven't done any ROOT or ROMing to my phone since I've owned it, I've stayed true to the true image they released, and I'm not comfortable downgrading it to some other image that wasn't on the phone. I attempted to do the instructions outlined and I was unable to get pas the stage of pushing the:
RUU_Supersonic_1.47.651.1_Radio_2.05.00.06.10_release_CL195459
to the phone. It says USB error, and I have debugging mode enabled.

cardiox said:
I would suggest using this unroot program and make sure you use the 1.47 one because there are 3 different roms. This is what I did as I had the june update as you. This will guarantee that you have the right stock rom and are not rooted. Then try the update again...
http://forum.androidcentral.com/htc-evo-4g-roms-hacks/19278-how-unroot-return-stock.html
This is the route I took and was just like you...I had no probs this way!
Click to expand...
Click to collapse
I RE-Loaded this version, as the other "older" versions would not work (re-loaded, as this is what I already HAD on my phone)... It wiped the system, and ALL of my info/apps (make sure you back up) and then I was able to do the Froyo Update... YES !!!! Thanks...
http://shipped-roms.com/shipped/Sup...51.1_Radio_2.05.00.06.10_release_CL195459.exe

I did the same, thank you !

No prob...have fun!!!

Froyo Update Won't Install
To start off - I have never rooted my evo - my phone is running Android 2.1 update 1 supersonic - and I did not try to do the "pre-release" update put out by HTC. Since late last night, I have been trying to install Froyo through system updates (settings, system updates, htc software update). I am able to download the upgrade, which is about 80 MB, but for some reason the update will not install. When I click install now, my phone restarts in the bootloader. If I click on fastboot, it searches for an image on my SD card but can't find one. If I hit recovery, it just returns me to the main bootloader screen. The only thing I can do is reboot or shut down my phone. When my phone boots back up, it says the update is downloaded and ready to be installed. I have tried redownloading the update but the same thing happens. Any help would be appreciated, preferable without losing contacts and apps. I'm trying to save a factory reset for a last resort.
Thanks,
Nick

Nick,
Please read the earlier posts, and follow the link from Cardiox... He said the following...
"I would suggest using this unroot program and make sure you use the 1.47 one because there are 3 different roms. This is what I did as I had the june update as you. This will guarantee that you have the right stock rom and are not rooted. Then try the update again...
http://forum.androidcentral.com/htc-...urn-stock.html
This is the route I took and was just like you...I had no probs this way!"
Then read my posts, and you will see that I had the SAME problem you are having, and this worked for me... I posted the thread... It is pretty easy if you follow the instructions... Let me know if it works for you... Good luck !!!

wolverinexc said:
To start off - I have never rooted my evo - my phone is running Android 2.1 update 1 supersonic - and I did not try to do the "pre-release" update put out by HTC. Since late last night, I have been trying to install Froyo through system updates (settings, system updates, htc software update). I am able to download the upgrade, which is about 80 MB, but for some reason the update will not install. When I click install now, my phone restarts in the bootloader. If I click on fastboot, it searches for an image on my SD card but can't find one. If I hit recovery, it just returns me to the main bootloader screen. The only thing I can do is reboot or shut down my phone. When my phone boots back up, it says the update is downloaded and ready to be installed. I have tried redownloading the update but the same thing happens. Any help would be appreciated, preferable without losing contacts and apps. I'm trying to save a factory reset for a last resort.
Thanks,
Nick
Click to expand...
Click to collapse
I am not a genius by no means thus I am only sharing info that I have from personal trial and error. If you are going to a bootloader screen during this update process and your SD card is mounted then you most likely will need to bite the bullet and either do a factory reset or follow the link instructions so given. For some reason this update can not find the original factory code or RUU that it is trying to update. Sounds like your SD card is mounted but it can't find it...I would strongly consider just starting over with that link program. It does not root you it just puts you back square one with factory code. Then the update will have something to build off of...which you apparently don't have for whatever reason.

Ok, this is what I needed to know. I'm backing up my stuff with bitpim and will just do this. Thanks for all the help and the speedy responses!
-Nick

Related

cannot flash stock RUU

i get a "can't connect to phone" error and a black screen with silver HTC letters on it on the screen of my phone when trying to flash the latest stock RUU. this is after the updater reboots the phone to try and flash.
i ran some root technique a couple days after i got my EVO (stood in line @ 5:30am to boot!). don't remember what it was though. toasts orig root i guess.
then it ran that sd card update (which didn't work for me). dunno if any of this matters, but wanted to provide back story.
why can't i flash??
Well depending on if you installed todays OTA update somehow changes my answer to your question.
For one if you did not install todays OTA update then the problem you are having is very commen and easily fixed. You'll notice that after it tells you there is no connection your phone should still be at the black screen with htc's logo. Without disconnecting or restarting your phone relaunch the RUU and go through it again. You should notice it will actually work the second time and eventually youll get a progress bar on your pc and eventually on the phone. This I am 90% certain should fix your problem. I've used the RUU numerous times and that has become standard procedure, although I don't understand why.
This will unroot your phone meaning you can then run unrooted or its now presentable if you have reason to take it in for replacement/warrenty issues.
But be warned! If you go back to stock in order to receive todays OTA update you will not be able to root your phone again using any current methods or files. Youll receive an error about the file being older than the new and wont be able to even partial root let alone get nand access.
On my end I unrooted today to test out the new features knowing full well I wouldn't be able to root again with the update installed. I figured I'd be able to use the RUU like you are because when it unroots a phone it takes it back to the default software from the day the phone was release but it was my luck that for whatever reason this new update effs up trying to use the RUU.
Is there a way to restore to factory settings that won't have the update installed or is it like how the 3GS was and once you upgrade thats it
Try flashing directly from the sd card, link is in my sig '(un)root'
-------------------------------------
Sent from my god phone.
aaaahhh. there it goes. thanks.
actually it was more i was having sd-card issues still. kept unmounting. rather happy w/ how the EVO works for now so rooting/modding isn't a priority. figured i'd reflash to see if it fixed the sd issue.
thanks!

[Q] Stuck somewhere between root and unroot..

Hi all.
I'll start by saying I have gotten in way over my head. I rooted my Evo with unrEVOked's one-click method, and then began to experience some problems with my 3g. Thinking I had somehow botched the rooting process, I tried to unroot using the two-step method I also found on xda (cannot post link.. further proof I am a noob ). More problems sprang up, one thing led to another, various fixes were tried (HUGE thanks to everyone in the IRC channel last night that tried to help my sorry ass..) but to no avail.
Here is where my phone is at now: booting using vol down+power shows me S-ON. Trying to flash mtd-eng.zip results in an error, so I am seemingly stuck with S-ON. Normally I would be happy about this (that's one step closer to unrooted, right?) but I notice I still have Superuser in my apps. My 3g is working again for whatever reason (no complaints here! maybe it was a Sprint-side problem in my area.. what timing!) but I'm confused as to whether my phone is rooted or not.
Ideally, I would like to go back to unrooted, since I have made it abundantly clear to myself that I am not yet prepared to embark in rooting. If anyone could guide me in the right direction, I would be very thankful.
You no longer have root access. Nothing you do at this point will allow you to run a .img on your own.
Your best bet would be to try and run one of the RUU programs to get it all back to stock.
I don't know if the Superuser application will be removed by this but you can try it:
Go to Settings>SD & Phone Storage>Factory Data Reset
Your phone should reboot and may have erased the Superuser app.
Jim M said:
You no longer have root access. Nothing you do at this point will allow you to run a .img on your own.
Your best bet would be to try and run one of the RUU programs to get it all back to stock.
I don't know if the Superuser application will be removed by this but you can try it:
Go to Settings>SD & Phone Storage>Factory Data Reset
Your phone should reboot and may have erased the Superuser app.
Click to expand...
Click to collapse
I did this, and my phone is now in RA-evo-v1.8.0 (it rebooted into recovery). Should I reboot the system now? I find it strange that it took me here in the first place.
The current PC36IMG that is flashed to the Evo is one with Amon Ra built into it.
The only RUU program that I am allowed to run (from the list that was given out in one of the unrooting evo threads) gives me the 170 error before anything happens.
You don't have root access, but your phone still has a custom recovery (Amon_RA) right now. No way to get rid of the custom recovery now except through an official update that replaces the recovery file.
Like I said you can try to run one of the RUU Official updates found in the Developer forum.
Don't know your location, but if you post it, someone close to you might try to help you out in person.
Jim M said:
You don't have root access, but your phone still has a custom recovery (Amon_RA) right now. No way to get rid of the custom recovery now except through an official update that replaces the recovery file.
Like I said you can try to run one of the RUU Official updates found in the Developer forum.
Don't know your location, but if you post it, someone close to you might try to help you out in person.
Click to expand...
Click to collapse
With a little digging and poking and reading, I found the proper RUU, ran it, and I believe I am now back to fully unrooted. Thank you very much for your help!

[Q] 12/15 - HTC Evo Maintenance Release - 3.70.651.1 CANT INSTALL HELP!

Hey my evo doesnt want to update it!!?? why??? it reboots.. then i get the loading thing that is starting to do it. but then i get the TRIANGLE WITH THE EXCLAMATION MARK.. with the little Android bOY.. LOL.. Could it be because its rooted? :/
HOPE ITS NOT BECAUSE OF THAT!! :/ HELP PLEASE
You don't need to install the latest 3.70 release...it is just a maintenance upgrade and has no improved functionality ...I hope you made a nandroid bc you can restore that to get back to your previous state. Good luck
Sent from my PC36100 using XDA App
Im new to all this man.. i dont really know anything.. like whats nandroid?? sorry for a stupid question.. but it says is has the Swype typing thing..
One more question.. what happens if i reset the Whole phone? like with the option it has to reset it to its FACTORY DATA RESET.. WILL IT WORK? OR WILL IT JUST NOT BOOT ANYMORE? OR WILL I STILL BE ROOTED? TH \ANKS
never accept a sprint upgrade with a rooted phone, it will mess your phone up...since you dont know what a nandroid is, im assuming you never made one..you are going to have to restore the phone back to original out of the box and a factory data reset is not the way to do it...
try this ...download the 3.30 release from this site and put in root of sd card http://shipped-roms.com/index.php?category=android&model=Supersonic
EDIT...in order for your phone to see this ..boot into bootloader..when phone is off, hold the volume button down and then hold the power button...the phone will see it and flash and update it...you will be back to stock and not rooted...you will have to re root the phone and then create a nandroid...
read this for more info on nandroid backup http://www.simplemobilereview.com/android-rooted-what-is-nandroid-backup/
to recap..never accept a sprint ota upgrade with a rooted phone, you will mess your phone up (as you already know) and once rooted, always create a nandroid...if you ever mess something up, you can restore that nandroid and restore your phone to working condition
also..once you are rooted and you want to update to the latest sprint over the air updates, search this forums for rooted stock RUU and you can then flash the lastest rom from sprint which is rooted...instead of trying to accept the OTA like you did
good luck
oK.. I WILL DO THAT WHEN I HAVE TIME.. LUCKLY MY PHONE DIDNT MESS UP TRYING IT.. LOL..
oK so installing the ROOTED STOCK RUU.. it will already be rooted, and i can still install sprints updates and upgrades with no problem correct?
THANKS FOR THAT BUD! SOUNDS EASY TO FACTORY RESET THE PHONE THANKS!!
drummer2780 said:
oK.. I WILL DO THAT WHEN I HAVE TIME.. LUCKLY MY PHONE DIDNT MESS UP TRYING IT.. LOL..
oK so installing the ROOTED STOCK RUU.. it will already be rooted, and i can still install sprints updates and upgrades with no problem correct?
THANKS FOR THAT BUD! SOUNDS EASY TO FACTORY RESET THE PHONE THANKS!!
Click to expand...
Click to collapse
Once you restore to factory non rooted and then re root...you have install the rooted ruu to get the latest sprint upgrades ...you don't accept any ota updates ever...just flash the most current rooted ruu and you will have the latest sprint updates
Sent from my PC36100 using XDA App
Oooh ok ok.. i think i get it.. THANKS! I APPRECIATED!!
weaselp1 said:
Once you restore to factory non rooted and then re root...you have install the rooted ruu to get the latest sprint upgrades ...you don't accept any ota updates ever...just flash the most current rooted ruu and you will have the latest sprint updates
Click to expand...
Click to collapse
Self confessed complete Android/Evo newbie here... I didn't even know how to access the settings on the phone until about 30 minutes ago. I've been working with iPhones since day one and have jailbroken many releases, so I get the general idea. It's actually my wife's "work" Android, and a co-worker of hers rooted the phone at some point. She tried to install the auto-download 3.70.651.1, it failed, and she gave it to me. Pulling the battery and resetting seemed to get things back to working, but now I'm taking over management of this phone and getting things right.
Here is where the phone is:
Nag screens about updated software seen. Update now selected. Update seemed to fail with a triangle/exclamation point, phone locked.
Pulling battery gets a normal reboot. Still get nag screen about "do you want to update"
Settings/aboutphone/software info shows "Software number 3.29.651.5" after failed update
Here's what I've done so far:
On software update screen, chose to "delete update". Rebooted. No more nag.
Turned off "scheduled check" for system software updates in Settings menu.
Figured out how to boot into the recovery menu. Looks like "Clockwork backup" was already installed. (ClockworkMod Recovery v2.5.0.1)
Created a nandroid backup using clockwork.
Rebooted phone
Mounted the SD card to my Mac, backed up the SD card including hidden files.
Verified creation of clockworkmod nandroid.md5 file
A few questions:
Once you restore to factory non rooted and then re root...you have install the rooted ruu to get the latest sprint upgrades Is this really necessary? Can I not just find a latest/greatest "rooted ruu" and overlay it on top of my current configuration?
I see some threads with titles like "[ROM] joeykrim-SDX-original-5.1 Odex *Stock Rooted 3.70.651.1* Dec 15th 2010". Is this an example of a "rooted ruu"?
This thread says I need to install "unrevoked 3.2.1" and "unrevoked forever". I'm guessing these are different tools than whatever was originally used to root my phone. Any chance installing them will conflict?
If I go back to a stock 3.3 ruu, what happens to all the applications and info already on the phone? Does it just overlay the software, or wipe everything clean?
TIA for helping an Android/Evo newbie out!

Android update!

Disclaimer: This worked on my phone. I am not responsible if your phone turns into an expensive brick.
I know this isn't quite the update everyone was waiting for I managed to pull the 2.3.6 OTA files. I also managed to figure out how to flash them. Turns out CWM 5 offers root adb access, everything we need to update and root this phone. Note I tried CWM 6 but it said "possible loss of root" so apparently CWM 6 likes to reside on an already rooted phone.
Note this is not the most elegant solution. The most elegant would be a signed update.zip. The second most elegant would be something flashable with CWM or Odin. Too bad I don't know how to do those. I do know how to do this.
The first thing to do is make sure you are on the AT&T stock firmware. It doesn't matter if you've already flashed something else. No need to wipe cache or factory reset or anything (although if you run into problems you should try to do that step). Download it from samfirmware.com. Flash it with Odin. This will put you on stock 2.3.5. Even if you were already on 2.3.6, or rooted, or on Rogers, this will work. After the flash, boot the phone normally, wait a minute or so, and shut it down.
Now for the fun part. AT&T will not push the OTA to a non AT&T customer. The flash will also not work with a modified phone (hence the reflash to stock). How to gain root access to manually flash the OTA? If we install root, it will not install. If we install CWM, we will not have the stock recovery which is required to process the OTA. So...
How about this? We install CWM 5. You can find it here http://forum.xda-developers.com/showthread.php?t=1458153
Then we adb into the phone, and push the OTA files, and then reflash the stock recovery over CWM, and then manually reboot into OTA mode. That sounds crazy... crazy enough to work.
After you've flashed CWM, reboot into it and make sure your phone is still connected to your computer. We won't actually be using CWM, just the root access it provides over adb. Unzip the two zip files below (why use external hosting, I can store zips up to 11 MB on here) into a folder and run fota.bat. Ooo and ahh over your Gingerbread.
But what about root? Well, I posted in another thread a complicated method for rooting 2.3.6 using the root access from CWM, but how about easy? Boot your phone into 2.3.6 and let it sit for a minute or so, and shut it down. Reboot into Odin mode, and reflash CWM over the stock recovery (again). Copy the Superuser zip from the folder you made earlier to your SD card. Flash this with CWM. This is the beta of Superuser 3.2, courtesy of Rom Manager. Download the stericson busybox app from the Market if you want busybox as well.
This was a fun way to kill a weekend
Throws a signature verification failed error.
Try again with the new method
Had a few mild scares. After flashing CWM on stock, it refused to boot into it but after 3 tries and my screen acting up upon boot, it finally booted into CWM. Launched the bat file and it went well. Upon booting up and entering the update process, it froze up at 74% and refused to continue. Rebooted the phone and it once again entered the update process and this time it managed to finish. Phone rebooted and after checking "About phone", my phone is on 2.3.6 stock. When you initially provided the OTA files and the sig check failed, I had a good feeling this would be the only other way to do it as I tried to sign it and it also failed. Thanks for taking the time to post all of this.
Why go to 2.3.6? It´s better than 2.3.5 customized?
Better question: we're getting ICS within the month, so why bother with 2.3.6 when you can just upgrade to 4.x.x when it comes down?
-Ara
AraDreamer said:
Better question: we're getting ICS within the month, so why bother with 2.3.6 when you can just upgrade to 4.x.x when it comes down?
-Ara
Click to expand...
Click to collapse
Because there are some people who will want to stick with 2.3.5/6 . He made this so that those who do, can update to 2.3.6 even when they aren't with AT&T, almost hassle free.
narume said:
Had a few mild scares. After flashing CWM on stock, it refused to boot into it but after 3 tries and my screen acting up upon boot, it finally booted into CWM. Launched the bat file and it went well. Upon booting up and entering the update process, it froze up at 74% and refused to continue. Rebooted the phone and it once again entered the update process and this time it managed to finish. Phone rebooted and after checking "About phone", my phone is on 2.3.6 stock. When you initially provided the OTA files and the sig check failed, I had a good feeling this would be the only other way to do it as I tried to sign it and it also failed. Thanks for taking the time to post all of this.
Click to expand...
Click to collapse
When I was testing this, I saw that behavior if you didn't completely boot up the phone between steps (ie, flash stock firmware, boot phone, flash CWM, boot phone). I don't know what would cause it otherwise. Glad to see your phone made it.
narume said:
Because there are some people who will want to stick with 2.3.5/6 . He made this so that those who do, can update to 2.3.6 even when they aren't with AT&T, almost hassle free.
Click to expand...
Click to collapse
Actually I did it because I've owned this phone for exactly two weeks and discovered all the available ROMs are based on 2.3.5 even though 2.3.6 has been out since December. CWMR with root has been out since January, and since then nobody else has rooted 2.3.6 or found a way to flash it. And I thought, it couldn't be that hard? And even more amazed when I discovered CWMR comes with root out of the box, without even touching /system. The only other missing piece was the stock recovery, which also wasn't out in the wild. 3 birds for one stone
On a side note, if you want to do some cleaning after the OTA and you decide to root, you can delete /cache/fota and /data/fota safely.
Nardholio said:
Actually I did it because I've owned this phone for exactly two weeks and discovered all the available ROMs are based on 2.3.5 even though 2.3.6 has been out since December. CWMR with root has been out since January, and since then nobody else has rooted 2.3.6 or found a way to flash it. And I thought, it couldn't be that hard? And even more amazed when I discovered CWMR comes with root out of the box, without even touching /system. The only other missing piece was the stock recovery, which also wasn't out in the wild. 3 birds for one stone
On a side note, if you want to do some cleaning after the OTA and you decide to root, you can delete /cache/fota and /data/fota safely.
Click to expand...
Click to collapse
Ah, I see. Well, still, being able to flash to 2.3.6 is nice because if anyone ever decides to stick with 2.3.6 they can easily flash the update now. Maybe more people like you will pop up and start pushing out more useful content like this for the Glide so it won't be a dead area of development anymore.

[Q] Quick question about stock recovery

Hello all, this is my first post. I'm looking for a little clarification on which stock recovery I should use so I can do OTA updates.
First, a little background. This is the first device that I've ever unlocked and rooted. I did a lot of reading before I started, but sometimes you don't really learn until you get your hands dirty. I started with an AT&T HTC One M8. I used HTCdev to unlock the bootloader, then used TWRP recovery. After that, I used Hasoon2000's All-in-one-toolkit for the Perm Root. All went as expected. I then loaded the Xposed framework and tried a couple of things with it. Suddenly, my phone started re-booting every 30 seconds or so. After panicking a bit, I figured out that there was a problem with the SuperSU. I re-applied that and all has been happy again. Since then, I also tried to obtain S-Off using the firewater method, but it failed with the Whelp message so I still only have S-On. I've now uninstalled the Xposed framework and I want to revert back to a stock recovery so I can do future OTA updates.
When I use getvar all, my version-main is blank. From what I have read, this is a common problem so I'm not worried about it. But, isn't this the number that I need to determine which stock recovery to use? Is this the same number that shows up in the Settings->About->Software information->Software number? Does the cid have any determination in which stock recovery to use?
After I do find the correct stock recovery, it is my understanding that I just flash that back to the device and it should be safe for OTA updates in the future. Is this correct?
Sorry... I'm a little gun shy after my reboot problem and I'm just looking for a little confirmation that I'm understanding things correctly before pulling the trigger again.
Thanks!
Ron
ericksonline said:
Hello all, this is my first post. I'm looking for a little clarification on which stock recovery I should use so I can do OTA updates.
First, a little background. This is the first device that I've ever unlocked and rooted. I did a lot of reading before I started, but sometimes you don't really learn until you get your hands dirty. I started with an AT&T HTC One M8. I used HTCdev to unlock the bootloader, then used TWRP recovery. After that, I used Hasoon2000's All-in-one-toolkit for the Perm Root. All went as expected. I then loaded the Xposed framework and tried a couple of things with it. Suddenly, my phone started re-booting every 30 seconds or so. After panicking a bit, I figured out that there was a problem with the SuperSU. I re-applied that and all has been happy again. Since then, I also tried to obtain S-Off using the firewater method, but it failed with the Whelp message so I still only have S-On. I've now uninstalled the Xposed framework and I want to revert back to a stock recovery so I can do future OTA updates.
When I use getvar all, my version-main is blank. From what I have read, this is a common problem so I'm not worried about it. But, isn't this the number that I need to determine which stock recovery to use? Is this the same number that shows up in the Settings->About->Software information->Software number? Does the cid have any determination in which stock recovery to use?
After I do find the correct stock recovery, it is my understanding that I just flash that back to the device and it should be safe for OTA updates in the future. Is this correct?
Sorry... I'm a little gun shy after my reboot problem and I'm just looking for a little confirmation that I'm understanding things correctly before pulling the trigger again.
Thanks!
Ron
Click to expand...
Click to collapse
Yes you can go to software number to get the info you need. To do an OTA you need a stock sense ROM (NO CHANGES TO ANY SYSTEM APPS) you then need to flash the correct recovery for your software number and [IMPORTANT] relock the bootloader. You then can reboot into your system and take the OTA while still being able to unlock the bootloader and flash a custom recovery afterwards.
No need to relock the bootloader for an ota. People should stop spreading that info
Thanks for the replies!
Just to check my understanding, since I simply unlocked the bootloader, used the TWRP recovery, added SuperSU, installed then uninstalled Xposed framework, that means that I should still be on a stock sense ROM (with no changes to any system apps), right?
There is a lot to learn with all of this when you are first starting out. I'm reading a lot, but sometimes you do find conflicting information. I'd rather be a little cautious than do something stupid!
Thanks again!
ericksonline said:
Hello all, this is my first post. I'm looking for a little clarification on which stock recovery I should use so I can do OTA updates.
First, a little background. This is the first device that I've ever unlocked and rooted. I did a lot of reading before I started, but sometimes you don't really learn until you get your hands dirty. I started with an AT&T HTC One M8. I used HTCdev to unlock the bootloader, then used TWRP recovery. After that, I used Hasoon2000's All-in-one-toolkit for the Perm Root. All went as expected. I then loaded the Xposed framework and tried a couple of things with it. Suddenly, my phone started re-booting every 30 seconds or so. After panicking a bit, I figured out that there was a problem with the SuperSU. I re-applied that and all has been happy again. Since then, I also tried to obtain S-Off using the firewater method, but it failed with the Whelp message so I still only have S-On. I've now uninstalled the Xposed framework and I want to revert back to a stock recovery so I can do future OTA updates.
When I use getvar all, my version-main is blank. From what I have read, this is a common problem so I'm not worried about it. But, isn't this the number that I need to determine which stock recovery to use? Is this the same number that shows up in the Settings->About->Software information->Software number? Does the cid have any determination in which stock recovery to use?
After I do find the correct stock recovery, it is my understanding that I just flash that back to the device and it should be safe for OTA updates in the future. Is this correct?
Sorry... I'm a little gun shy after my reboot problem and I'm just looking for a little confirmation that I'm understanding things correctly before pulling the trigger again.
Thanks!
Ron
Click to expand...
Click to collapse
ericksonline said:
Thanks for the replies!
Just to check my understanding, since I simply unlocked the bootloader, used the TWRP recovery, added SuperSU, installed then uninstalled Xposed framework, that means that I should still be on a stock sense ROM (with no changes to any system apps), right?
There is a lot to learn with all of this when you are first starting out. I'm reading a lot, but sometimes you do find conflicting information. I'd rather be a little cautious than do something stupid!
Thanks again!
Click to expand...
Click to collapse
Yup you're good ROM wise. Just flash the stock recovery and you should be good to go.
You can be unlock and have OTA.
You just need a stock recovery.
HTC ONE M8 fails to load up after failed software update
Hello guys, this is my first post. I really need your help as I'm at risk of loosing all my phone data. My phone internal memory had been exhausted and I bought an external SD card. I am unable to transfer data to the external SD card. I was doing a software update on my phone that failed to install, there was a warning sign on the phone screen for a few minutes then it try to power on but has failed, as it's seem to stuck on the screen that display htc powered by android. I tried the recovery holding down the power button and the column up button, the phone power off and back on but is still stuck on this screen (htc powered by android). I tried connecting the phone to my laptop to try and recover my data, but it's not mounting to the laptop. Please can someone help me. Thanks in advance.
Similar to the post above ie rooted and kept on stock. Also loaded a few Xposed modules but when I connected to my wifi I had over 30 updates so loaded all of them and once loaded the old bootloop started. I restored my nandroid backup from TWRP (this is an essential backup) and I was back in action. Phew!!!! I no longer had Xposed. So I did the updates again and the same thing happened. I am now updating one at a time which is painful when you've got so many. I also tried wiping the caches but that didn't work.
I noticed there were a lot of HTC apps eg HTC sense input, service pack, blinkfeed etc. I also notice a super SU update. ericksonlines post above said he had a problem with superSU. What kind of problem? What does he mean by reapplying? Flashing from TWRP?
So the big question. Which app(s) update did the damage???
Any apps I shouldn't update eg HTCs?
Has this happened to anyone else? What did you then do? Is the new updated superSU the problem
Apologies for cross posting on an Australian site but I'm a bit frazzled with all of this.
jbarr3 said:
Similar to the post above ie rooted and kept on stock. Also loaded a few Xposed modules but when I connected to my wifi I had over 30 updates so loaded all of them and once loaded the old bootloop started. I restored my nandroid backup from TWRP (this is an essential backup) and I was back in action. Phew!!!! I no longer had Xposed. So I did the updates again and the same thing happened. I am now updating one at a time which is painful when you've got so many. I also tried wiping the caches but that didn't work.
I noticed there were a lot of HTC apps eg HTC sense input, service pack, blinkfeed etc. I also notice a super SU update. ericksonlines post above said he had a problem with superSU. What kind of problem? What does he mean by reapplying? Flashing from TWRP?
So the big question. Which app(s) update did the damage???
Any apps I shouldn't update eg HTCs?
Has this happened to anyone else? What did you then do? Is the new updated superSU the problem
Apologies for cross posting on an Australian site but I'm a bit frazzled with all of this.
Click to expand...
Click to collapse
Hello! It is possible that an update came through that caused my phone to start into the boot loop. I'm not sure because it worked fine for a few hours before the problem started happening all of the sudden. My guess is that something updated that broke SuperSU. As soon as something would try to use SuperSU (or maybe the rights granted by SuperSU), the phone would crash and reboot. To fix the problem, I rebooted into the bootloader (TWRP) and re-installed SuperSU from there. After I re-installed, everything began working nicely again. I have not had a problem since and the problem occurred a few months ago now. I have also recently updated to the new version of SuperSU with no problems at all.
I hope this helps!
Ron
ericksonline said:
Hello! It is possible that an update came through that caused my phone to start into the boot loop. I'm not sure because it worked fine for a few hours before the problem started happening all of the sudden. My guess is that something updated that broke SuperSU. As soon as something would try to use SuperSU (or maybe the rights granted by SuperSU), the phone would crash and reboot. To fix the problem, I rebooted into the bootloader (TWRP) and re-installed SuperSU from there. After I re-installed, everything began working nicely again. I have not had a problem since and the problem occurred a few months ago now. I have also recently updated to the new version of SuperSU with no problems at all.
I hope this helps!
Ron
Click to expand...
Click to collapse
You're dead right Ron. Supersu was the culprit. Just simply updating from the playstore caused this. I restored an android backup which got me back. I went into the old SuperSu (V1.94) and clicked "clean up when updating from google play" or similar, did the update again (v 2.04 from google) and while this didn't cause rebooting, I couldn't install the binary. I chose "normal" (maybe I should have chosen TWRP) and it didn't work. So I flashed my old v1.94 from TWRP and that got me back. So some questions on updating SuperSu.
1. Is flashing the zip file through TWRP the best way to install a new version?
2. Should I delete or uninstall the old version or will flashing do that for me? Did you simply flash over the top of the other one?
3. Should I stick with 1.94, which works, or should I update to a new and improved version?
4. I think 2.16 is the latest. What version are you running, is it stable and do you recommend it ?
5. I assume I get the zip file from chainfire. They are way ahead of the google playstore for updates
jbarr3 said:
You're dead right Ron. Supersu was the culprit. Just simply updating from the playstore caused this. I restored an android backup which got me back. I went into the old SuperSu (V1.94) and clicked "clean up when updating from google play" or similar, did the update again (v 2.04 from google) and while this didn't cause rebooting, I couldn't install the binary. I chose "normal" (maybe I should have chosen TWRP) and it didn't work. So I flashed my old v1.94 from TWRP and that got me back. So some questions on updating SuperSu.
1. Is flashing the zip file through TWRP the best way to install a new version?
2. Should I delete or uninstall the old version or will flashing do that for me? Did you simply flash over the top of the other one?
3. Should I stick with 1.94, which works, or should I update to a new and improved version?
4. I think 2.16 is the latest. What version are you running, is it stable and do you recommend it ?
5. I assume I get the zip file from chainfire. They are way ahead of the google playstore for updates
Click to expand...
Click to collapse
I'm no expert, but I'm happy to share my experience. I do believe that flashing from TWRP is the best way to install. That is what I did to fix my reboot problems. I don't recall uninstalling the previous version in any way. I think the old file was still on there. I browsed to it in TWRP and installed it. I'm not sure what version I was on when I did this. Recently, a new update (2.16) was available that downloaded through the Play Store. When I went to update, it recommended that I use TWRP to install. I didn't go this route because I had already switched back to the default bootloader and didn't want to reinstall TWRP if I didn't have to. So, I just used the "normal" method. It updated successfully and I've had no problems. I am now running 2.16.
ericksonline said:
I'm no expert, but I'm happy to share my experience. I do believe that flashing from TWRP is the best way to install. That is what I did to fix my reboot problems. I don't recall uninstalling the previous version in any way. I think the old file was still on there. I browsed to it in TWRP and installed it. I'm not sure what version I was on when I did this. Recently, a new update (2.16) was available that downloaded through the Play Store. When I went to update, it recommended that I use TWRP to install. I didn't go this route because I had already switched back to the default bootloader and didn't want to reinstall TWRP if I didn't have to. So, I just used the "normal" method. It updated successfully and I've had no problems. I am now running 2.16.
Click to expand...
Click to collapse
Thanks erick but given what's happened I don't think I'll ever update from the playstore again. I'll load 2.16 using TWRP and report back. I can't stress enough how important it is to have a nandroid backup. I reckon its the best reason to load a custom recovery. Its got me out of trouble twice now and gives me piece of mind. I've actually gone overboard on this and I have two backups on my phone which I have copied to my PC..
vm54 said:
You can be unlock and have OTA.
You just need a stock recovery.
Click to expand...
Click to collapse
And stock ROM.
Updated to v 2.16. Piece of cake!!!
Loaded through TWRP, rebooted and that was it. It didn't even ask about installing the binary. Same binary I guess.
It worried me, however, when I saw over 700 pages on this version xda. Most with problems.
jbarr3 said:
Updated to v 2.16. Piece of cake!!!
Loaded through TWRP, rebooted and that was it. It didn't even ask about installing the binary. Same binary I guess.
It worried me, however, when I saw over 700 pages on this version xda. Most with problems.
Click to expand...
Click to collapse
Awesome! I'm glad to hear that it worked!

Categories

Resources