Related
Greetings all,
I've spent the last 18 hours searching and reading all of the Hermes (and other) forums for the link to the Cyberon Voice Dialer cab referenced in JJ's initial post for Black 2.0.
I would like to add it to my most excellent Black 2.0 ROM that appears to be working very quickly and flawlessly. Is it possible someone could point me in the proper direction?
Timtown said:
Greetings all,
I've spent the last 18 hours searching and reading all of the Hermes (and other) forums for the link to the Cyberon Voice Dialer cab referenced in JJ's initial post for Black 2.0.
I would like to add it to my most excellent Black 2.0 ROM that appears to be working very quickly and flawlessly. Is it possible someone could point me in the proper direction?
Click to expand...
Click to collapse
The same files are on the Black 1.2 page
http://forum.xda-developers.com/showthread.php?t=298936&highlight=cyberon+voice+dial
try voice commander, it has more functionality than voice dial (download on same page)
You were ahead of me in 2 seconds
Doohhh!
Wow, thanks for the prompt reply. I don't understand how I missed this location. I must of tried 25 different searches.
voice
The Black's voice dialer does not work with Verizon 6700, AKU 3.5
MrRev said:
The Black's voice dialer does not work with Verizon 6700, AKU 3.5
Click to expand...
Click to collapse
Why would it? It's not a Hermes. The 6700 is an Apache. You're in the wrong forums, sparky.
can someone tell me how to install the Cyberon Voice Dial Cab???
i thought it would install by itself but when i unzip there's a xml setup and when i click on it there's a bunch of codes...
went to this forum...but i still dont understand how to install it...
can i have some help please?
big samm said:
went to this forum...but i still dont understand how to install it...
can i have some help please?
Click to expand...
Click to collapse
You really don't want to install this thing... it is 100% P.O.S.!!! I wish there were a way I could permanent remove it from ROM, never to have it come back...
goestoeleven said:
You really don't want to install this thing... it is 100% P.O.S.!!! I wish there were a way I could permanent remove it from ROM, never to have it come back...
Click to expand...
Click to collapse
is it that bad?? if yes ill pass on that!!
Why does this thread exist?
MODS: Please close this thread.
I have hermes100-AT&t, i dont use it with AT&T so i have the ability to make video-calls. I have just upgraded to "Hermes_WM6_WWE_vp3G_v3.62.0_ATT_Full" but it doesnt have the video-call dial.(this is the only rom not crashing so please i would like a solution without getting diffrent rom if possible...)
can someone give me an advice?
thanks
u should really read thru the forum there are tons of postings on 3g dialer. welcome to the site. but to not get flammed i would for sure use the search function for "3g dialer"
doesnt work
thanks 4 your prompt answer, i have installed "schaps video dailer" it became purpel but the video buttom doesnt shows.
what should i do?
It was reported that none of the actual 3G dailer works on the new WM6 rom but Black's one (part1,part,part3). It can be found on the thread of my rom (near the last page I think); but it is a very very unclean way to get a 3G dialer.
fun_key said:
It was reported that none of the actual 3G dailer works on the new WM6 rom but Black's one (part1,part,part3). It can be found on the thread of my rom (near the last page I think); but it is a very very unclean way to get a 3G dialer.
Click to expand...
Click to collapse
Dialer should be located here: http://forum.xda-developers.com/showthread.php?p=1565446#post1565446
Question for you Fun_Key... What's the recommended way to load up the 3G dialer? Do you know if a package is available? I haven't had any luck with the package maker or with Schen's 3g either.
Thanks!
Quakie
Quakie said:
Dialer should be located here: http://forum.xda-developers.com/showthread.php?p=1565446#post1565446
Question for you Fun_Key... What's the recommended way to load up the 3G dialer? Do you know if a package is available? I haven't had any luck with the package maker or with Schen's 3g either.
Thanks!
Quakie
Click to expand...
Click to collapse
fun_key's method (part1,part2,part3) works fine but as he said, it seems quite an unclean way, i mean opening up the windows folder would now take me 10-12 seconds compared to previously 2-3 seconds.Aside from that, havent really noticed any other slowdown but i'd really like to know fun_key's other way of incorporating the 3g dialer....Fun_key if you could help us on this please? I noticed that u did it on the last version of ur rom and I'd really like to know how u did it...
What seems to slow windows listing is to overwrite ROM files. If the files are allready in rom, no problem.
What I did was something like that: Look into the part1.cab with a cab tool, copied all the data to the ROM and the registry. But 2 of the bmp located in the part1.cab are corrupted. You will find in a folder called wm6 extra or something like an uncorrupted copy of those file. Replace the corrupted file with the good one and you're done.
The part1,part2,part3 is an unpretty workarround to get rid of those corrupted file.
I also did some test with the beloved Kaiser 3G dialer, and everytime I made a video call my phone allmost crashed (work fine though). Any further information about this issue welcome (thread jacking on it's way )
Thanks Fun_Key! Will give it a try and see if we can come up with a new cab installer!
If anyone else has done this already, I would appreciate it if someone would let us know so I don't have to reinvent the wheel!
Thanks Everyone!
Quakie
fun_key said:
What seems to slow windows listing is to overwrite ROM files. If the files are allready in rom, no problem.
What I did was something like that: Look into the part1.cab with a cab tool, copied all the data to the ROM and the registry. But 2 of the bmp located in the part1.cab are corrupted. You will find in a folder called wm6 extra or something like an uncorrupted copy of those file. Replace the corrupted file with the good one and you're done.
The part1,part2,part3 is an unpretty workarround to get rid of those corrupted file.
I also did some test with the beloved Kaiser 3G dialer, and everytime I made a video call my phone allmost crashed (work fine though). Any further information about this issue welcome (thread jacking on it's way )
Click to expand...
Click to collapse
Please help, 3G video dialler not working for me.
Hi all.
Sorry for double posting my problem, but Fun_Keys ROM thread is now 28 pages deep, nearly 300 posts, and growing!!
This thread is relevant to my problem, so I add it here -
I have Fun_Keys WM6 1.5.2 on my UK T-Mobile Vario II hermes and after enabling the video dialling button using the advanced config tool, I still cant make video calls.
I've tried calling somebody with a 3G phone who can video dial other people. If he video calls me, he gets a service unavailable beeping sound. If I call him, I just get nothing but this dialog -
"Fail to make the video call. What do you want to do?"
Try again
Make voice call
Send SMS
Send MMS
Does anybody have any ideas what to look for to sort the problem out? I'm very new to custom 3g dialers and custom WM6 ROMs. I've taken a look around but cant find anything suitable. Its now the only thing I'm missing from the original firmware.
Any help would be appreciated.
Many thanks
Stu
the 1-3.cab worked just fine (slow but ok) thanks
the 1-3.cab worked just fine (slow but ok) thanks
Did you try the 3-cab method yet? That seems to work for everyone.
Quakie
Heliosphan said:
Hi all.
Sorry for double posting my problem, but Fun_Keys ROM thread is now 28 pages deep, nearly 300 posts, and growing!!
This thread is relevant to my problem, so I add it here -
I have Fun_Keys WM6 1.5.2 on my UK T-Mobile Vario II hermes and after enabling the video dialling button using the advanced config tool, I still cant make video calls.
I've tried calling somebody with a 3G phone who can video dial other people. If he video calls me, he gets a service unavailable beeping sound. If I call him, I just get nothing but this dialog -
"Fail to make the video call. What do you want to do?"
Try again
Make voice call
Send SMS
Send MMS
Does anybody have any ideas what to look for to sort the problem out? I'm very new to custom 3g dialers and custom WM6 ROMs. I've taken a look around but cant find anything suitable. Its now the only thing I'm missing from the original firmware.
Any help would be appreciated.
Many thanks
Stu
Click to expand...
Click to collapse
Already in the ROM?
Hi Quakie
I was under the impression that its already in my WM6 ROM because I'm using Fun_Keys latest.
Regardless, I'll try it -
Can anybody tell me where I can find the three CAB files?
Many thanks
Stu
3G Dialer
Check out post #5 in this forum. Also, the link is here: http://forum.xda-developers.com/showthread.php?p=1565446#post1565446
Quakie
Heliosphan said:
Hi Quakie
I was under the impression that its already in my WM6 ROM because I'm using Fun_Keys latest.
Regardless, I'll try it -
Can anybody tell me where I can find the three CAB files?
Many thanks
Stu
Click to expand...
Click to collapse
Hi does anyone know how to get landscape mode wihout having to open the slideout keyboard.
I can only think of the app called greator i think this auto rotates but can someone confirm this will work and is suitable for pro2 without any problems
Gyrator 2 works fine on the TP2. I'm using it myself.
R.
jutley said:
Hi does anyone know how to get landscape mode wihout having to open the slideout keyboard.
I can only think of the app called greator i think this auto rotates but can someone confirm this will work and is suitable for pro2 without any problems
Click to expand...
Click to collapse
Hi,
Gyrator2 will work with the Rhodium, yes.
Google will find it for you.
It has allready been mentioned in this forum too.
Cheers,
Beasty
but it keeps saying the cnet framework vershio is older than the one reqired can someone link me to what i need
jutley said:
but it keeps saying the cnet framework vershio is older than the one reqired can someone link me to what i need
Click to expand...
Click to collapse
Google for Microsoft.Net Compact Framework.
3.5 should be the latest version, the cab should be around 5mb.
The stock roms allways seem to be shipped with 2.0, such a waste.
Cheers,
Beasty
As explained at the bottom of the Gyrator download page...
.NET Compact Framework 3.5 Redistributable
R.
can anyone link me the cab i cant even download it of microsoft keeps saying connection error can someone help please.
ok i found a rapidshare link to the latest vershion 3.5 do i install on pc its 33meg and where do i put the ini file for grator.
try this one
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
ok thanks got it working what are the best settings to have any tips anyone can give me
I've installed this and it seems a bit hit and miss, I have tried searching for instructions, but can't find any, I have seen people refer to a "learn" screen, but mine does not seem to have this, is there an "idiots guide" anywhere?
yeah. i think someone should help with the tutorial on how to use this app. also, can it work on HTC Droid DNA, if NO, how can i solve the problem on this phone. thanks in advance
Once again, you have dug up a 4 year old post...
Hello,
First of all, sorry of my english, i am from spain.
One Question: does TP2 have acelerometer like for exaple Diamond or it only turns screen when you use the keyboard?
Yes. Yes it does.
malumbreras said:
Hello,
First of all, sorry of my english, i am from spain.
One Question: does TP2 have acelerometer like for exaple Diamond or it only turns screen when you use the keyboard?
Click to expand...
Click to collapse
Find out everything else here:
http://forum.xda-developers.com/showthread.php?t=519814
thank you all so much, it is important for me.
Thank you.
and if you don´t mind, another quewstion: when your are ussing TOM TOM is it posible to put screen landscape??
Thank you
are you sure it is possible to turn screen without ussing keyboard?
all videos i ve seen use keyboard to turn screen, and also a video of tom tom uses keyboard
malumbreras said:
are you sure it is possible to turn screen without ussing keyboard?
all videos i ve seen use keyboard to turn screen, and also a video of tom tom uses keyboard
Click to expand...
Click to collapse
The Opera browser does it automatically. For everything else, practically every TP2 owner has installed 'Gyrator 2' or 'screenChanger' (my favourite), which are free apps utilising the G-Sensor. They run pretty much silently and allow you to configure which programs you want to rotate etc.
Get the TP2 - You know you want to.
Yes. But only by sliding out the keyboard. You can use the G sensor, but then you have to adjust the registry.
Theres a reg hack to enable the change orientation function to be shown in the screen to change button assignments. So you can set when you hold down the send button it changes to landscape mode. And you don't have to pull out the keyboard!
I can't remember what it was mind.. but it's on these forums somewhere.
thank you all.
thank you brynweb for those programs.
thank you quarintus.
andrewrees: if you remember the post, please tell me.
thanks a lot
i have tried Gyrator, and the problem i´ve seen is that the program must be running if you want to rotate screen.
correct or im wrong?
you dont need to use any program
there is a reg hack on here to allow it to tilt auto in things like calender etc etc
read this
http://forum.xda-developers.com/showthread.php?t=526701
I did the reg that doesnt need any program running and it works great. With a bit of modding I got it to do TomTom, too.
TomTom on PDA is OK, but it still doesnt have text to speach for spoken street names.
malumbreras said:
i have tried Gyrator, and the problem i´ve seen is that the program must be running if you want to rotate screen.
correct or im wrong?
Click to expand...
Click to collapse
changeScreen does a better job of hiding itself than Gyrator. One day I'll use the reg hack, but I'm still in the tinkering stage where I can't make up my mind about what programs I want to rotate, so it's easier for me to use the program option right now.
bigjezza said:
I did the reg that doesnt need any program running and it works great. With a bit of modding I got it to do TomTom, too.
TomTom on PDA is OK, but it still doesnt have text to speach for spoken street names.
Click to expand...
Click to collapse
any info how i wouldnt mind tom tom in landscape
thanks
Has anyone tried this G-Config app?
http://forum.xda-developers.com/showthread.php?t=487991
http://pockethacks.com/g-config-configurator-for-the-new-sensorsdk-4/
it modifies the registry for you... I'm going to install later on today when I have time to play with it...
mozster said:
Has anyone tried this G-Config app?
http://forum.xda-developers.com/showthread.php?t=487991
http://pockethacks.com/g-config-configurator-for-the-new-sensorsdk-4/
it modifies the registry for you... I'm going to install later on today when I have time to play with it...
Click to expand...
Click to collapse
oooo, interesting! Thanks for that.
I tried it.. it works a treat... might be worth adding it to the sticky? Mods?
am I the only one getting an error when trying to run BsG G-Config, that i need to update my .net thing on the phone? could someone point me to whatever i might need to grab from windows.com or wherever to get this to work? thanks in advance
malumbreras said:
i have tried Gyrator, and the problem i´ve seen is that the program must be running if you want to rotate screen.
correct or im wrong?
Click to expand...
Click to collapse
That is correct. However, mine starts itself at startup and you can tell it to minimise when it starts, so you don't need to worry about starting it up all the time. It also doesn't use much memory, so you don't need to worry about that either.
Corell said:
am I the only one getting an error when trying to run BsG G-Config, that i need to update my .net thing on the phone? could someone point me to whatever i might need to grab from windows.com or wherever to get this to work? thanks in advance
Click to expand...
Click to collapse
would anyone be able to help me with this one? thanks alot
Who could guys change the SetModelID.exe to make the installtion go through the HD for blackberry app suite?
there is one here for HD2
forum.xda-developers.com/showthread.php?t=632147
and here for pro2
forum.xda-developers.com/showthread.php?t=593162
i would be very thankful for who could do this.
Mesho.112 said:
Who could guys change the SetModelID.exe to make the installtion go through the HD for blackberry app suite?
there is one here for HD2
forum.xda-developers.com/showthread.php?t=593162
and here for pro2
forum.xda-developers.com/showthread.php?t=593162
i would be very thankful for who could do this.
Click to expand...
Click to collapse
i HAVE BEEN LOOKING FOR THIS FOR QUITE SOMETIME, LET'S HOPE SOMEONE COULD SOLVE THIS ISSUE.
imtiyazee said:
i HAVE BEEN LOOKING FOR THIS FOR QUITE SOMETIME, LET'S HOPE SOMEONE COULD SOLVE THIS ISSUE.
Click to expand...
Click to collapse
we'll imtiyazee & see if could someone offer help.
both links are the same, which one is the correct one for the HD2?
i don't get it what does this do?
Tha said:
both links are the same, which one is the correct one for the HD2?
Click to expand...
Click to collapse
i'm sorry this link for HD2
forum.xda-developers.com/showthread.php?t=632147
slaming said:
i don't get it what does this do?
Click to expand...
Click to collapse
google it use ' blackberry service'
Mesho.112 said:
Who could guys change the SetModelID.exe to make the installtion go through the HD for blackberry app suite?
there is one here for HD2
forum.xda-developers.com/showthread.php?t=632147
and here for pro2
forum.xda-developers.com/showthread.php?t=593162
i would be very thankful for who could do this.
Click to expand...
Click to collapse
DONE! . It's attached.
Installation goes without any problems (just needed to uninstall bb connect software). BB Application Suite starts but after splash screen I got only white screen and then program probably terminates itself (or wm does it) as I see only today screen (TouchFLO is switched off while BB Application Suite starts).
I have Energy.BLACKSTONE.21891.Leo_MaxManila_07.Feb.2010 flashed on my Touch HD and registry tweek - AKU changed to .1.6.0). maybe the WM build could be a problem.
Please share your experience with BB Application Suite on BlackStone I realy am keen on the bb service.
nnnpga said:
DONE! . It's attached.
Installation goes without any problems (just needed to uninstall bb connect software). BB Application Suite starts but after splash screen I got only white screen and then program probably terminates itself (or wm does it) as I see only today screen (TouchFLO is switched off while BB Application Suite starts).
I have Energy.BLACKSTONE.21891.Leo_MaxManila_07.Feb.2010 flashed on my Touch HD and registry tweek - AKU changed to .1.6.0). maybe the WM build could be a problem.
Please share your experience with BB Application Suite on BlackStone I realy am keen on the bb service.
Click to expand...
Click to collapse
I'm sorry nnnpga but the file is empty, would you plz reupload it...
Mesho.112 said:
I'm sorry nnnpga but the file is empty, would you plz reupload it...
Click to expand...
Click to collapse
Sorry my mistake. Watching Vacouver ...
Now archive with the file
nnnpga said:
Sorry my mistake. Watching Vacouver ...
Now archive with the file
Click to expand...
Click to collapse
Allright, it worked in my phone "XTROM_GRIDEVO_20B" but it need registertion with either BIS or BES .. ill try and feed you back ..
Thanks nnnpga...
Working but no soft keyboard
After hard reset and installation BAS started to work on Energy.BLACKSTONE.21891.Leo_MaxManila_07.Feb.2010.
I have got a PIN (the same as at the BB connect) however was not able even to try enterprise activation as the soft keyboard was not available anywhere there. Or my phone is still not bugs free or it had meant to be this way as Touch Pro (Raphael) has hardware keyboard.
Anyhow I was to flash it to something else tomorrow so I will give it another try.
nnnpga said:
After hard reset and installation BAS started to work on Energy.BLACKSTONE.21891.Leo_MaxManila_07.Feb.2010.
I have got a PIN (the same as at the BB connect) however was not able even to try enterprise activation as the soft keyboard was not available anywhere there. Or my phone is still not bugs free or it had meant to be this way as Touch Pro (Raphael) has hardware keyboard.
Anyhow I was to flash it to something else tomorrow so I will give it another try.
Click to expand...
Click to collapse
There is keyboard there but I'm not ganna tell you how to get it caz I'm sure you don't want to see it lool, it the worst keyboard ever, BIS must be joking with us. anayway long press until you see the keyboard in leftbottom.
I got my pin too with BIS service but still stock with enterprise activation. I was thinking to get BES but after I saw the keyboard I changed my mind or If someone haked the app to change the keyboard.
sorry
sorry to sound like an idiot but, ive downloaded the file that was attached...how do i install the appliciation suite?
could this be done for hd mini
Where is the dot "." in soft keyboard?
Thanks for your advices.
Managed to get up to the point of actibation, soft keyboard appeared by long press for each character.
To enter my email I need a dot "." for my email-name and the ".com" ending. There is a character that appears like this, but sits on the middle between characters not on the ground. Any ideas?
Thnx
G.
Hi all,
Ive read all the posts from over 50 sites (XDA and others) and can still not get the BAS to work on my HTC HD2 Leo.
Ive got it to install, Both BBC and BAS.
I have a BES account with my company.
I can get to the Register screen and nothing happens, says message sent but i can go no further.
Ive tried the hack for Raphael, done all the other reg tweeks.
Can someone please provide a simple answer for geting BAS to run, Register, do enterprise activation, sync with my company email, allow internet use etc.
I hate the blackberry they use, dont know why they use it.
I would very much love for someone to provide a solution, i only have 1 week left on my valid activation code. I need my HD2.
Please, please help.
ive spent countless hours and i am actually loosing sleep over the issue.
Thanks
Thanks for the software