Hello,
First of all, sorry of my english, i am from spain.
One Question: does TP2 have acelerometer like for exaple Diamond or it only turns screen when you use the keyboard?
Yes. Yes it does.
malumbreras said:
Hello,
First of all, sorry of my english, i am from spain.
One Question: does TP2 have acelerometer like for exaple Diamond or it only turns screen when you use the keyboard?
Click to expand...
Click to collapse
Find out everything else here:
http://forum.xda-developers.com/showthread.php?t=519814
thank you all so much, it is important for me.
Thank you.
and if you don´t mind, another quewstion: when your are ussing TOM TOM is it posible to put screen landscape??
Thank you
are you sure it is possible to turn screen without ussing keyboard?
all videos i ve seen use keyboard to turn screen, and also a video of tom tom uses keyboard
malumbreras said:
are you sure it is possible to turn screen without ussing keyboard?
all videos i ve seen use keyboard to turn screen, and also a video of tom tom uses keyboard
Click to expand...
Click to collapse
The Opera browser does it automatically. For everything else, practically every TP2 owner has installed 'Gyrator 2' or 'screenChanger' (my favourite), which are free apps utilising the G-Sensor. They run pretty much silently and allow you to configure which programs you want to rotate etc.
Get the TP2 - You know you want to.
Yes. But only by sliding out the keyboard. You can use the G sensor, but then you have to adjust the registry.
Theres a reg hack to enable the change orientation function to be shown in the screen to change button assignments. So you can set when you hold down the send button it changes to landscape mode. And you don't have to pull out the keyboard!
I can't remember what it was mind.. but it's on these forums somewhere.
thank you all.
thank you brynweb for those programs.
thank you quarintus.
andrewrees: if you remember the post, please tell me.
thanks a lot
i have tried Gyrator, and the problem i´ve seen is that the program must be running if you want to rotate screen.
correct or im wrong?
you dont need to use any program
there is a reg hack on here to allow it to tilt auto in things like calender etc etc
read this
http://forum.xda-developers.com/showthread.php?t=526701
I did the reg that doesnt need any program running and it works great. With a bit of modding I got it to do TomTom, too.
TomTom on PDA is OK, but it still doesnt have text to speach for spoken street names.
malumbreras said:
i have tried Gyrator, and the problem i´ve seen is that the program must be running if you want to rotate screen.
correct or im wrong?
Click to expand...
Click to collapse
changeScreen does a better job of hiding itself than Gyrator. One day I'll use the reg hack, but I'm still in the tinkering stage where I can't make up my mind about what programs I want to rotate, so it's easier for me to use the program option right now.
bigjezza said:
I did the reg that doesnt need any program running and it works great. With a bit of modding I got it to do TomTom, too.
TomTom on PDA is OK, but it still doesnt have text to speach for spoken street names.
Click to expand...
Click to collapse
any info how i wouldnt mind tom tom in landscape
thanks
Has anyone tried this G-Config app?
http://forum.xda-developers.com/showthread.php?t=487991
http://pockethacks.com/g-config-configurator-for-the-new-sensorsdk-4/
it modifies the registry for you... I'm going to install later on today when I have time to play with it...
mozster said:
Has anyone tried this G-Config app?
http://forum.xda-developers.com/showthread.php?t=487991
http://pockethacks.com/g-config-configurator-for-the-new-sensorsdk-4/
it modifies the registry for you... I'm going to install later on today when I have time to play with it...
Click to expand...
Click to collapse
oooo, interesting! Thanks for that.
I tried it.. it works a treat... might be worth adding it to the sticky? Mods?
am I the only one getting an error when trying to run BsG G-Config, that i need to update my .net thing on the phone? could someone point me to whatever i might need to grab from windows.com or wherever to get this to work? thanks in advance
malumbreras said:
i have tried Gyrator, and the problem i´ve seen is that the program must be running if you want to rotate screen.
correct or im wrong?
Click to expand...
Click to collapse
That is correct. However, mine starts itself at startup and you can tell it to minimise when it starts, so you don't need to worry about starting it up all the time. It also doesn't use much memory, so you don't need to worry about that either.
Corell said:
am I the only one getting an error when trying to run BsG G-Config, that i need to update my .net thing on the phone? could someone point me to whatever i might need to grab from windows.com or wherever to get this to work? thanks in advance
Click to expand...
Click to collapse
would anyone be able to help me with this one? thanks alot
Related
Hi,
I would like to share with You my little app, that I wrote to make using HTC easier and more comfortable. With this app You can assign finger friendly keybord when stylu is In, and small keyboard for stylus when it is out. Unfortunately it works only on devices with stylus sensor like HD, Diamond, Touch Pro, SE X1 (I hope it works, I've tested with BlackStone only). If you have some suggestions, ideas or if You run this app on other devices please let me know.
You can download it from here (Sorry for my English and google translated page).
I've updated apllication to version 1.1.2
New features:
- support landscape mode
- up to four screen keyboard support
I hope it'll be usefull.
nice app...i'm sure it will help me, as it seams that my touch hd keep changing input keybord completely randomly and with no logic whatsoever so will give a try...hope it will bring an law and order to that mess
dobra robota kolego
Uh... I don't think X1 has a stylus sensor...
ipporek said:
Uh... I don't think X1 has a stylus sensor...
Click to expand...
Click to collapse
So it will not work on SE Sorry.
I've updated apllication. More info at the first post.
hi
hi any screenshots available? does it work like sipchange ? able to auto choose which keypad u want after startup ?
I've attached some screens. During system start, application is checking screen oreintation and stylus state and then deciding which keyboard should be used.
Hi, this sounds very interesting. Unfortunatly the link doesn´t work.
Could you just post it here?
Thx, nearly
Unfortunately link didn't work, don't know why. I 've uploded file here, but remember, the newest version always can be found at http://green-lemon.pl
nitro__67 said:
Direct link http://lemon.byethost15.com/downloadImac112. I would not like to upload to different servers. It 's easier to manage new versions now.
Click to expand...
Click to collapse
Still doesn't work
nitro__67 said:
Direct link http://lemon.byethost15.com/downloadImac112. I would not like to upload to different servers. It 's easier to manage new versions now.
Click to expand...
Click to collapse
Nope, can't download. Would love to try this out, it's a good idea.
Can you supply another download location?
Thanks for your efforts.
Use the link in first posting, deactivate Google translation:
http://lemon.byethost15.com/download/imac
pobierz = download.
Cab attached - will delete attachment, if nitro_67 wants to.
File uploaded.
nitro__67 said:
Unfortunately link didn't work, don't know why. I 've uploded file here, but remember, the newest version always can be found at http://green-lemon.pl
Click to expand...
Click to collapse
Thanks man. It works fine in blackstone.
Link doens't work for me too...
I tried the Cab file above, it really works, meaning it will change the Imput method according to stilus in or out.
But if I closed the phone or make a soft reset, the first time I want to write a message the imput method is still the standard one
You must setup program to start service with Windows.
Do you mean select the option "Run at Start up" ?
Yes I did select it but as I mentionned, after a reset or turning the mobile off, the first message I will write will open with the standard keyboard... I then move stilus in and out and it starts to work correctly until the next reset or turn off
So strange, because program is started. Maybe You are using keyboard which is loaded leter. Uncheck 'run at start' and add shortcut to autostart. After this program should start after all proceses and services.
Good idea, I will have a try...
nitro__67 said:
If you have some suggestions, ideas
Click to expand...
Click to collapse
Hi Nitro, is it possible to launch an application when you take out the stylus? I would love to have Phatpad opened when I do so, to take a quick note.
I won't mind closing it the one time I pull out the stylus in another app.
Hope you can help.
Ok, I decided to write new thread because most of the rom makers I pm to didn't answer me at all. Some kind of secrets or whatever. I think we should help each other to improve our ROM's but maybe I'm wrong.
I have some issues in my owe ROM which I can't really fix. Maybe someone will know the solution
1. Some ROM makers wrote in their changelogs that now CommMgr is really closing without being on the process list all the time? How?
2. I'm using EZinput keyboard 2.0.33633 full qwerty and two keyboards should be available: full qwerty and phone keyboard. Only the first one is present in the system (the second one now is standard MS keyboard instead of phone keyboard 2.0 EZinput). Why? I changed the EXT package many times to make sure it's ok and all the time the same issue...
3. Is there a working method to change system rings to wav? Every time I do it then they doesn't work. Do I have to change also some registry value?
4. Windows Media Player dosen't play any videos. I changed mHub and mHubVO into some other versions but still no efect. What else could be the reason?
That's all what I'd love to know to make my ROM better
Thanks in advice!
Ok, I see that non of the grate, admired here rom makers are going to help me. Sweet. Anyway... I made a little step ahead with problem no2.
I know how to manually switch between those keyboards using registry entries [HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
CurrentSIP set to a00 is Phone Keypad and d00 for fullQWERTY. But still it's impossible to change it in menu (WM6.5 21725)
That's all I want to share with, maybe it will help someone. Should I expect some respond? I don't think so :]
michal_banszel said:
Ok, I see that non of the grate, admired here rom makers are going to help me. Sweet. Anyway... I made a little step ahead with problem no2.
I know how to manually switch between those keyboards using registry entries [HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
CurrentSIP set to a00 is Phone Keypad and d00 for fullQWERTY. But still it's impossible to change it in menu (WM6.5 21725)
That's all I want to share with, maybe it will help someone. Should I expect some respond? I don't think so :]
Click to expand...
Click to collapse
Dude, about the comm manager, I don't know which version of comm manager are u using. But I got my comm manager working good n closing when clicked on x button. All I can say is don't use any new version like 2.8 or topaz comm manager. Use the 2.7.1.4 version. It's OG diamond comm manager n works nice. I'm using the same version.
Thanks buddy Actually I'm using 2.8.1. I will switch to 2.7.1.4 as u said.
The keyboard is still my biggest problem. I wonder what's wrong that I cannot switch between Full qwerty and phone keypad in the sip menu bar.
michal_banszel said:
Thanks buddy Actually I'm using 2.8.1. I will switch to 2.7.1.4 as u said.
The keyboard is still my biggest problem. I wonder what's wrong that I cannot switch between Full qwerty and phone keypad in the sip menu bar.
Click to expand...
Click to collapse
Did u try the GEN Y sip menu..??
I heard someone there saying that if we have the touchflo installed, then only we can change between the phone pad n qwerty board. But touchflo brings some more diff probs elsewhere.
Surprising issue this.. Coz it works perfectly fine with ezinput 1.
My touchflo is completly deleted. All registry entries and app. because in WM6.5 it's totally useless.'
Yes, it is surprising. I checked registry entries and everything seems to be fine... but it's not
michal_banszel said:
My touchflo is completly deleted. All registry entries and app. because in WM6.5 it's totally useless.'
Yes, it is surprising. I checked registry entries and everything seems to be fine... but it's not
Click to expand...
Click to collapse
do u have a package of touchflo..?? If not, I'll mail it to you. Try to import it n see if it works. I had in the previous build of this kitchen.
Yes, I have. Ok, I'll try to cook it with TouchFlo but how is touchflo connected with availability to change keyboard from context menu?
michal_banszel said:
Yes, I have. Ok, I'll try to cook it with TouchFlo but how is touchflo connected with availability to change keyboard from context menu?
Click to expand...
Click to collapse
i dont know..check gen y thread..u will definitely get moe help there. its surely been talked about in that thread.
I think I know the answer. Ability to change between keyboards wouldn't work on wm6.5 without HTC menuenhancement.
michal_banszel said:
I think I know the answer. Ability to change between keyboards wouldn't work on wm6.5 without HTC menuenhancement.
Click to expand...
Click to collapse
nope its not only that, u definitly need the touchflo package, but that package conlicts with wm 6.5
the only thing we can do is wait for HTC to bring out its first WM 6.5 rom for diamond2, then we can take the new touchflo or ezinput package from that rom
about the windows media player issue, make sure u have the DShow OEM in your rom
yozgatg said:
nope its not only that, u definitly need the
about the windows media player issue, make sure u have the DShow OEM in your rom
Click to expand...
Click to collapse
I do have it - DShow_2_0_19141126_0 - or maybe there is some newer? Or older working better?
michal_banszel said:
I do have it - DShow_2_0_19141126_0 - or maybe there is some newer? Or older working better?
Click to expand...
Click to collapse
there a slight newer one in my kitchen, here are the oems i use for multimedia:
- DShow_2_00_19143426_0
- mHub_6_57_080529_E0
- mHubVO_1_75_090515_X0
u should also check the following drivers in OEMDrivers:
- qtv.dll
- qtv_mp4_decoder.dll
try replacing those drivers
Can you please share with all those files? Please
BTW which ConcurrenceMGR are u using? 1_5_19113219_0000?
michal_banszel said:
Can you please share with all those files? Please
BTW which ConcurrenceMGR are u using? 1_5_19113219_0000?
Click to expand...
Click to collapse
just check the link in my signature, i released the full kitchen of my rom
Thanks man!
Ok, it's me again
And again some damn issues in my kitchen
For last two days I was looking for the source of why my Face down mute ring stopped working. In registry everything is fine. Exept of registry, is there any dll library or something responsible for that? Also when I'm in windows file explorere and want to copy the file from IS to main memory (I do tap on "Copy")and then tap on the menu to choose the location then it crashed.
Any ideas for soulution those two problems?
PS. One more thing I forgot... I used to have my clock and calendar to set up automaticly the date and time after HR but now it seems to be gone... Is it up to network type currently using? GPRS/3G? Or maybe some registry value?
michal_banszel said:
Ok, it's me again
And again some damn issues in my kitchen
For last two days I was looking for the source of why my Face down mute ring stopped working. In registry everything is fine. Exept of registry, is there any dll library or something responsible for that? Also when I'm in windows file explorere and want to copy the file from IS to main memory (I do tap on "Copy")and then tap on the menu to choose the location then it crashed.
Any ideas for soulution those two problems?
PS. One more thing I forgot... I used to have my clock and calendar to set up automaticly the date and time after HR but now it seems to be gone... Is it up to network type currently using? GPRS/3G? Or maybe some registry value?
Click to expand...
Click to collapse
Hey Michal,
found something that may help with the face down mute issue
pranavsethi said:
Hi,
Does mute on face down work?
Its not working on mine TD and would be glad if someone can get me to know how to get it working.
Even Checked HKLM, and there is no entry in Phone sector for Face down mute.
Kindly advise.
.............................
Pranav
Click to expand...
Click to collapse
cednicek said:
Try copy reg code from windows mobile 6.1, where it worked... I think i could work.
CODE: HKEY_LOCAL_MACHINE\Software\HTC\PHONE and change FaceDownMuteRing to 0 (default is 1)
Anybody has this problem?
Click to expand...
Click to collapse
Hope this helps
Thanks dude but it doesn't work. I was trying with both, 0 and 1 to make sure but still no effect. Friend of mine checked some others 6.5 ROM's and it seems that it doesn't work in any of them.
I found out that automatic time and date set works only if 3G/SHDPA network is available. So this question is out of date.
If anyone find the solution with face down mute ring then please let me know.
Another issue that I was hoping to solve is contact list popping up every time after SR. So in titanium softkeys registry I changed SK1URL into HTCActionScreen. And now... HTCActionScreen popping up every time after SR. Any solution for that?
Do images rotate on turning the device without opening the keyboard? like on HD or Diamond? Because in my TP2, images do not rotate on turning the device as it is supposed to due to g-sensor .... isn't it? Does it have to be activated somehow or is it not possible in TP2 ... which will be strange.
dr_s said:
Do images rotate on turning the device without opening the keyboard? like on HD or Diamond? Because in my TP2, images do not rotate on turning the device as it is supposed to due to g-sensor .... isn't it? Does it have to be activated somehow or is it not possible in TP2 ... which will be strange.
Click to expand...
Click to collapse
by default rotation with gyro does not work on Rhodium.
You can use gyrator2 if you wish to enable this functionality.
Cheers,
Beasty
I have the same problem. Screen rotates in opera, but not in Album.
same here, and gyrator is not the perfectly program for this... its slow, and it isn't integrated with WM after install. its just a stand-alone app what runs as the same way as other programs (you can also close it by taskmanager).
Also taksmanager doenst close programs by clicking [X] ?? (even when i select it)...
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Well found! Very Handy
Thanks
Joseng said:
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Click to expand...
Click to collapse
I understand this works great. few questions:
Doesn't it slow the device?
What programs do you suggest to be rotating without the screen sliding out and what programs do you think shouldn't flip to landscape because it gets annoying?
Joseng said:
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Click to expand...
Click to collapse
thanks. great find. but same question as above.
Why HTC has not made it default for the album?
dr_s said:
thanks. great find. but same question as above.
Why HTC has not made it default for the album?
Click to expand...
Click to collapse
The same question could be applied to many things HTC have done with the Rom on the Rhodium.
At the end of the day, do what we do best here, add the functionality that you want, then fix any problems that occur afterwards.
I haven't noticed any adverse affects using gyrator, as yet anyway.
Cheers,
Beasty
does anybody by any chance have the window class of sygic mobile drive (previously mcguider)??
Joseng said:
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Click to expand...
Click to collapse
how do you add this file to the reg for us newbs please
thanks for any help
Doesn't it automatically display the picture at the maximum size? Meaning if it is a landscape picture it displays it in landscape and if it is a portrait picture it displays it in portrait? I actually prefer the way it is done in the new album which I am running on my FUZE.
combat goofwing said:
how do you add this file to the reg for us newbs please
thanks for any help
Click to expand...
Click to collapse
Guide for newbies here
http://htctouchpro2.wordpress.com/2009/06/21/htc-touch-pro2-hacks-–-part-2-–-g-sensor-everything/
thanks thats why i love this site, you get what you think is a great phone and they just help you make it even better
and to think i thought my viewty was the muts nuts
Could someone help me out with the TomTom reg key? I get the modulename bit right, just point it to tomtomnavigator.exe. Don't really understand the whitelist key. What should the value be for Tomtom?
Thanks.
EDIT: Just found it in the topaz section. For anyone wlse who needs to know, it is "MunichWinClass" for some reason. Thanks to infoman68 for that.
Awsome thread I downloaded and installed the gyrator2, but I cannot figure out what plugin/program to grab from microsoft to install that dotnet 3.5 on the phone to get gyrator to work. can someone please point me to the correct file?
thanks.
to anyone else wishing to add an app to HTCs GSensor list in the reg and not knowing the window title or class...
download Gyrator2, install and run. Add a new event. Choose learn. Take stylus out. Make active the window you need the name of. Insert stylus. There! Gyrator has just told ya what ya need to know... Uninstall gyrator and add what it told ya to the reg...
nice post dude...
i am still trying to get the gyrator to work on my pro2.
did you also have issues with the dotnet thing?
Hello, brilliant suggestion from bigjezza. Myself I'm trying to get Microsoft Reader to react to my phone's gyrations. However when I bring up Gyrator 2 the MS Reader app is not listed. Actually it never came up in my program-list in the first place even though it did install and runs perfectly. Had to stick a shortcut in the Windows/Start-menu.
Any suggestion on how to get MsReader onto Garator's list, or does anyone know what the relevant data is for MsReader just like that?
Many thanks/McHan
Joseng said:
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Click to expand...
Click to collapse
I did install the .reg, then looked my self the new strings in the registry and everything looked OK, but the images on Album still do not respond to device rotation... Any other solution? Or it is need to activate or deactivate something else?
regards,
Tyrone
Hi,
I was wondering if there is a ROM out there that offers a tweak that allows the Zoom bar to be used to scroll thru lists like the old TP1. So it will save time with File explore and other apps. Thanks, and i am sorry if i posted this in the wrong place.
Also if there is anyother tweaks for the Zoom bar
kingfarmer said:
Hi,
I was wondering if there is a ROM out there that offers a tweak that allows the Zoom bar to be used to scroll thru lists like the old TP1. So it will save time with File explore and other apps. Thanks, and i am sorry if i posted this in the wrong place.
Also if there is anyother tweaks for the Zoom bar
Click to expand...
Click to collapse
I use this in my kitchen and it works perfect for that function.
Can this be done in a cab?
I don't know how to make cab's so if someone could do this I would really apperceiate it.
Thanks
JMM2009 said:
I don't know how to make cab's so if someone could do this I would really apperceiate it.
Thanks
Click to expand...
Click to collapse
+1 would love to have this as a cab!!
The zip contains a reg file only, simply import it with any reg tool, the scrolling function works.
controller38 said:
The zip contains a reg file only, simply import it with any reg tool, the scrolling function works.
Click to expand...
Click to collapse
i understand but its nicer to have it as a cab if in case u need to uninstall it..thanks though for the help
Will this STOP the zoom bar zooming in Opera?
JMM2009 said:
I don't know how to make cab's so if someone could do this I would really apperceiate it.
Thanks
Click to expand...
Click to collapse
Here is your cab file
take care
EDIT: this zoombar v1.1 now supports TomTom
dotcompt said:
Here is your can file
take care
Click to expand...
Click to collapse
Awesome but when this cab is installed what exactly is it supposed to do?? what extra functionality is it supposed to offer?? thanks for the cab etc!!
i installed the cab but i did not see any scrolling on anything, any help ?
controller38 said:
The zip contains a reg file only, simply import it with any reg tool, the scrolling function works.
Click to expand...
Click to collapse
im using total commander, where did you import it to ?
sorry, i am not too fluent in registry editing
jayizzbakk said:
i installed the cab but i did not see any scrolling on anything, any help ?
Click to expand...
Click to collapse
Which rom are you using... if the chef is using a smarttouch.dll from another phone ext like leo it will not work... if you open opera or IE it should allow you to zoom in using the phone zoom bar.. the registry containes allot of entries so it should support allot of different applications....
edit: may need a reboot to take effect.
joshkoss said:
Which rom are you using... if the chef is using a smarttouch.dll from another phone ext like leo it will not work... if you open opera or IE it should allow you to zoom in using the phone zoom bar.. the registry containes allot of entries so it should support allot of different applications....
edit: may need a reboot to take effect.
Click to expand...
Click to collapse
im using fusion rom v5.1 and zoom already works on opera,
will it work on scrolling through contacts on beejive im ?
Ive just started using this tweak and its pretty nice, but im wondering if its possible to reverse the setting. I would rather sliding to the right mean scrolling upward (up dpad) than what it is now. Also take into account that when i expose the keyboard and attempt to to slide to scroll up, i actually have to slide down to scroll up!
can u guys can make 2 work with iris browser that would by nice
Am I missing something, I installed the cab and restarted the phone. Nothing. Soft reset, still nothing. Do I then have to enable something? Using a TP2 on Verizon. Is this GSM only?
Thanks
Really the only app I'd need for this is MICROSOFT READER so I can slide right to turn a page and slide left to go back.
I see the reg hacks, but am unsure what to use for ClassName for Reader..
can you help?
Thanks,
Rick
works great
on my tmobile tp2 flashed to 6.5 European rom...
Works somewhat on stock sprint rom only a few apps actually work but hey I like thanks
Any chance it works on Topaz?
hello xda ppl, i am newbie for BlueAngel, and i dont have cable for it.
i got blueangel ruu with wm6.5 rom img and i transfered enterbootloader.exe and *.nbf to my mmc, moved enterbootloader.exe to phone memory and executed it.
not i have white splash screen with:
Serial (on top of screen)
and v2.10 (on bottom of screen)
there is no light on screen
i saw twice that both leds had flashed for about few milliseconds.
question is, how to exit bootloader and update *.nbf from mmc???
best regards
wook
_wook_ said:
hello xda ppl, i am newbie for BlueAngel, and i dont have cable for it.
i got blueangel ruu with wm6.5 rom img and i transfered enterbootloader.exe and *.nbf to my mmc, moved enterbootloader.exe to phone memory and executed it.
not i have white splash screen with:
Serial (on top of screen)
and v2.10 (on bottom of screen)
there is no light on screen
i saw twice that both leds had flashed for about few milliseconds.
question is, how to exit bootloader and update *.nbf from mmc???
best regards
wook
Click to expand...
Click to collapse
Congratulations, you just put your device in bootloader with no means to take it out of it... (sorry for the sarcasm...)
In any case, you will have to get a cable since the device has to receive a command to exit bootloader, which you will not be able to do through the device. There is no way to flash a rom through SD on the BA (I have a small project, but I am not certain that it will unlock it for you... in fact, I seriously doubt it).
I will try to upload it later and give you a link for it.
thanx anyway, i just got cable
charger and schemes do amiazing things
hehehe
btw, i am hermes user, and i thought it is just like in hermes, (reset exit bootloader) hehehehe
btw,m thank you for your support and reply.
man, you can not imagine what i have do to enter bootloader
about 30 minutes of rebooting device
i think i should keep in bootloader mode, it was too hard to get it in
hehehehe
regards
update!!!
phone fixed and updated to wm 6.5
best regards
wook
egzthunder1, thanx for your support, i look forward for link
_wook_ said:
update!!!
phone fixed and updated to wm 6.5
best regards
wook
egzthunder1, thanx for your support, i look forward for link
Click to expand...
Click to collapse
You got it working though...
yes, i managed to fix it, but it would be great to see that project you have started
one quick question, i did not find it anywhere, but is there resouce explorer or reshack sort of app written for wm5/6?
btw, is there any place where i can get winCE apis documentation, msdn annoys me, and if anyone of you use masm32, does someone know where can i get headers and library for masm32 (or should i start new topic and set proper name for this question?)
best regards
wook
_wook_ said:
yes, i managed to fix it, but it would be great to see that project you have started
one quick question, i did not find it anywhere, but is there resouce explorer or reshack sort of app written for wm5/6?
btw, is there any place where i can get winCE apis documentation, msdn annoys me, and if anyone of you use masm32, does someone know where can i get headers and library for masm32 (or should i start new topic and set proper name for this question?)
best regards
wook
Click to expand...
Click to collapse
I believe that there is a reshack for WM (in fact, I saw it not too long ago). As far as the apis, unfortunately, I am not a programmer, so I wouldn't even know where to start looking for that (other than google searches).
well, listing win32 and CE functions at same place....
i use winNT api help, because it does not contain .Net or winCE apis....lol
what is with that lonk???
regards
_wook_ said:
what is with that lonk???
regards
Click to expand...
Click to collapse
What's a lonk?
my bad, i was up to write link, but i misstyped...
happens to me all the time...:S
btw, is there any wm6 app that emulates desktop?
i saw some, but for now i like only HTC Home...
manila is good, but background irritates me very much.
regards
wook
_wook_ said:
my bad, i was up to write link, but i misstyped...
happens to me all the time...:S
btw, is there any wm6 app that emulates desktop?
i saw some, but for now i like only HTC Home...
manila is good, but background irritates me very much.
regards
wook
Click to expand...
Click to collapse
Which link are you talking about (I have like 4 in my signature)?
In any case, if you are looking for a UI that makes the device look like a Desktop, you need Wisbar Advance Desktop and Wisbar Advance. I have never been able to use them correctly, but I have seen people making their Home screens look like OSX, WinXP, and even Vista.
egzthunder1 said:
...(I have a small project, but I am not certain that it will unlock it for you... in fact, I seriously doubt it).I will try to upload it later and give you a link for it.
...
Click to expand...
Click to collapse
i was thinking about that link.
i tryed wisbar, but it is not something i may like.
there is something like wisbar on s60, and i gave up on it 2 years ago...
just dont know why do i have to be one who find all buggs in software\hardware :S
btw, ORD, i am partly in, but in my case, it dont have to be stable, but UI must be flawless
anyway, now i have issue with splash on hermes:S
going to try to fix that, see you later and thanx for nice conversation
regards
_wook_ said:
i was thinking about that link.
i tryed wisbar, but it is not something i may like.
there is something like wisbar on s60, and i gave up on it 2 years ago...
just dont know why do i have to be one who find all buggs in software\hardware :S
btw, ORD, i am partly in, but in my case, it dont have to be stable, but UI must be flawless
anyway, now i have issue with splash on hermes:S
going to try to fix that, see you later and thanx for nice conversation
regards
Click to expand...
Click to collapse
Drop by anytime
greetings my friend, just drop by to say hi and to ask about enabling clear type letters in landscape mode, how to enable that
(yes, you know that i will go and search for it after i posted question ... as always)
best regards
wook
_wook_ said:
greetings my friend, just drop by to say hi and to ask about enabling clear type letters in landscape mode, how to enable that
(yes, you know that i will go and search for it after i posted question ... as always)
best regards
wook
Click to expand...
Click to collapse
Hey _wook_
You could try going into Start>Settings>Personal>Input Options and check the options in there. I cannot remember off the top of my head, but I do believe that this option is somewhere in here.
yha, i know for that, but it is not for a landscape, only portrait mode.
but i will find something
thanx for reply
_wook_ said:
yha, i know for that, but it is not for a landscape, only portrait mode.
but i will find something
thanx for reply
Click to expand...
Click to collapse
I'll snoop around and see what I can come up with.
fixed:
registry value need to be changed, hklm/system/gdi/cleartypesettings/offonrotation (dword) set to 1 (by default is 0).
greetings
_wook_ said:
fixed:
registry value need to be changed, hklm/system/gdi/cleartypesettings/offonrotation (dword) set to 1 (by default is 0).
greetings
Click to expand...
Click to collapse
Nice find
thanx friend, btw, seems like HTweakC can do this too, but it did not worked for me.
seems like i will have to write app for this lol
(now i need to search for more registry 'hacks' and implement them in this )