Hello again....
I have been able to update my QTEK9090 in certain way, which with himself not to do in connecting this machine with my Palm TREO650 by Bluetooth.
When connecting it gives it to me a connection error; that it says:
BTWizardsProfiles
The device does not offer any usable services. Please enable any desired services on that device or choose another one.
Desire to know if some person has been able to connect these two machines by bluetooth and or since I can do it, since the configurations in both machines are correct.
Thank.
Hi all,
i am runing my trinity with WM6 and AX3l's rom. my issue is that i cant connect to my car stereo which is a pioneer DEH-P55. My trinity see's the stereo and gives the option for hands free but the stereo cant detect the trinity. my device is visible to others but the stereo wont pick it up. Any suggestions for a fix on this would be appreciated.
thanks
corm
maybe you have to push a button on your radio to activate first time pairing, that was the solution for my bluetooth headset.
(pairing from both sides)
just a suggestion, maybe it helps.
Try the Jetware bluetooth extension it has a 30 day trial and worked for my Alpine headunit its at http://www.jetwaremobile.com/
Thanks for the replies, but still no luck. I can pair other phones to the stereo but not this. Are there any settings that i may need to activate on the device that i am missing? its abit infuriating as i need to get this up and running as soon as.
rgds
Corm
activated "receive all incoming beams" ? its in settings/connections/beam
its already activated stormyb but thanks again for helping.
I always had problems using bt and irda...
I never succeed send/receive any file using my pc (my pc irda always worked fine with others devices). Beam enabled on commManager and on settings "receive all incoming beams".
When I try to connect (pair) using (htc) BT I get this error: the connection failed or the passcode is incorrect...
---
One time I tried to send a file to a nokia phone and I needed 30 min to succeed: restart phone, restart BT, restart beam, restart phone, restart nokia, restart BT, restart, restart, ....
Now I'm using the radio 1.46.00.11, rom eLiAs2.11wwe (before I was radio 1.38 and udk rom) and when I pair from htc, on pc I don't receive the pin request. If I pair from pc, I see the request for pin no htc but when I type it: "the connection failed or the passcode is incorrect".
Only one time I was succeed pair (and saved on device list), I typed 3 times the pin code, but after I can't transfer files...
From pc, I see the htc on the device list, if I try the ftp service, htc ask me: "xxx wants to connect with your device using bluetooth. Do you want to add XXX to your device list?" I answer yes but when I insert the pin, the pc give to me this error: "error establishing the connection"
If i try the voice gateway, after type the pin on htc I get this error on pc:
"the remote device closed the connection"
Using this last rom, when I try beam a file, I can't see my pc irda (using the udk rom I can to see but without success), I only see my pc BT but always "failed" the connection.
Nobody has the same problem?!
What bluetooth comms are you using, windows or Widcomm's?
I installed widcomm onto my laptop as I was suffering the same problems as you mention and I couild not get a bluetooth serial port setup either, once installed and restarted the pc then I just powered up both BT's and set the phone to visable and the laptop found it straight away with all the services and could setup the serial port.
I seem to recall there are numerous problems with most BT's when using the default windows drivers etc..
HTH's
hi, I'm using widcomm...
I didn't test again a bt headphone, but I have problems trying to connect to a nokia phone for example (n95, n73).
The irda never works... I tried too with a nokia phone and a remote control software for wm6... nothing...
All ok using headset BT...
I installed blueSoleil BT driver and now it is ok.
same ppc, same rom, same problem with my bt bury in the car and with other ppl's triyng to bt connect to my ppc. i can "see" them they can "see" me but there is no transmission TO me. I can send.
i am using the bt phone (bury) but onlt when I initiate the connection. i think it's a rom bug.
I just bought a Holux M-241 Bluetooth GPS reciever to work in conjunction with my Vogue (CDMA HTC touch), I've tried to follow the instructions provided to create a device relationship, but the instructions were written to connect to a WM5 device whereas my touch is WM6 and I keep on getting hung up when it asks me to enter a passcode.
This is the first time I've tried to use bluetooth with my touch and it doesn't mention anything about passcodes in the GPS setup instructions. I've tried entering both the P/N and the S/N numbers written on a sticker on the back of the M-241, as well as my device password, but it always tells me that "the passcode is incorrect" and then it drops the bluetooth connection from both the system tray and the M-241.
I must be doing something wrong, I would really appreciate if someone has any advice on this situation.
- Sam
Try to use "0000" or "1234" wich are often the standard codes.
I got a similar problem: My HTC Wizard recognises my Bluetooth mouse (HID) and it also pairs. My mouse works without passcode and it Pairs without entering one.
Though, when it comes to register the device as an HID Device after Pairing, WM aks for the Passcode again. This time, the "next" button stays grey until anything is entered. As my mouse works WITHOUT a passcode, I cannot register it the right way.
Is there any solution to adding an HID device without passcode to my wizard?
When using GPS in WM6 make sure the built-in GPS feature in "programs" is diabled. I had problems with my Globalsat BT-359, it wouldn´t pair and it turned out to be the built-in feature that was making a hard time. It was somehow on by default and when I diabled it I could pair on first try.
Just a thought.
on my hermes w/ WM6 i pair it using the (passcode from documentation) then I use 0000 as the passcode when prompted.
I have a different GPS but usually 0000 is the passcode
thanks for the help everybody!
"0000" was the passcode.
I'm a taxi driver and being able to pair my GPS to my Touch to find the shortest routes has changed the way I drive.
All the best,
- Sam
Holux M-241 don't work after pairing
Hi, I paired my Holuix M-241 ith the XDA-Exec, authorized it, created the outgoing COM port as explained on the manual, BUT openning google maps, it don't get current position, I WHAT I have to do?
Please, HELP .
Thanks
passcode
on my hermes w/ WM6 i pair it using the passcode from documentation then I use four zero as the code when prompted.
Hi,
I just got my new Tomtom Go 730
I tried to connect it to my P3300 for freespeech. The Tomtom found it and after selecting it the screen said I have to enter 0000 on my HTC. On my HTC a message came to connect and at that moment the HTC turned off.
I tried it again but it will not show the message again to enter the key on my HTC and after a while Tomtom stops trying.
I get the feeling that the HTC messed up and that something hinders the pairing. It is not the Tomtom as I can connect to my other phone just fine.
Also I have noticed when the Tomtom lists all BT devices in range, which are my Nokia Phone, my HTC P3300 and my Laptop, the Tomtom shows a little cellphone icon next to the Nokia (as it should) but shows a little computer icon next to both my HTC and my Laptop. So maybe it is also possible that Tomtom recognizes the HTC not as a phone profile but as a computer profile.
How can I "reset" the bluetooth of my HTC to accept incoming connections again. I tried softreset and took out the battery. I don't want to do a hardreset because I just reinstalled my phone a few days ago. Or if it is the wrong profile problem, how can I tell either the Tomtom or the HTC to use the phone profile?
Any ideas? Any help is very much appreaciated! Thanks!
I am not sure if this is the right place to post this... however....
I've a problem with this hid device:
Microsoft Bluetooth Notebook Mouse 5000 V1.0
My OS version is CM11-20141112-SNAPSHOT-M12-seranoltexx
The symptoms: Failing to pair. The phone finds the device and when I click on it (does not request a PIN or key), the phone says "Pairing..." and stays like that for 1min, after this period Phone simply says "Can't communicate with Microsoft Bluetooth Notebook Mouse 5000"
What I tried is to turn off the Bluetooth before the mentioned dialog and then I got "Couldn't pair with Microsoft Bluetooth Notebook Mouse 5000 because of incorrect PIN or passkey". (never gave it one).
So I tried to pair the same mouse with Motorola Defy CM7. The OS showed a dialog requesting PIN entry. I entered 0000 and the devices were paired.
Tried to pair on a PC running Linux and Windows:
with PIN 0000 (successful at both)
without PIN (successful on Windows, unsuccessful on Linux)
with random PIN (unsuccessful on both)
Tried to pair external BT keyboard on CM11, CM7, Windows and Linux:
with PIN unsucessfull everywhere
without PIN (CM11 and CM7 never asked for. On Linux it was optional. On Windows it was pain in the ass. Paired after 10th try without PIN, by specifically pointing that the device is HID and does not request a PIN).
with random PIN (failed everywhere)
What I am suspecting here is that the MS Windows is trying to pass PIN 0000 to everything even if option Does not request PIN is ticked.
CM11 Bluetooth stack is trying to pair without PIN once it sees HID device. And I guess here is the issue.
Tried to fix this by my self. Changed bluetooth.apk/bluetoothext.apk from various CM11-seranoltexx versions - no luck. Analysed every libbt-*.so. Turns out that all the libs are the same through out the different versions of CM11.
So any method which will allow me to add BT HID device with PIN?
Perhaps an Xposed module (although I didn't find anything useful), or a CLI command?
Any help or advice will be appreciated.
Thanks