First of all, I have a Cingular 8525 with the newest WM6. I get this error when I try to use my WiFi connection in IE. It lets me connect the network and even assigns me and IP address and everything, but whenever I try to load a page i get the 0x80072f78 error message. It happens on every network I have tried, even a completely unsecured network the other day. Is my wireless card in the phone broken?
try loading a different page after you get that error. if all else fails flash a new rom or hard reset and see if that works
I have tried I think every custom ROM in the rom thread. Whever I use any custom rom, both Viigo and RDP do not work. I'm on AT&T, and when I use the stock AT&T rom, they both work fine. When using any custom rom, I have the following problems:
1) Viigo - installs okay, but get invalid URI error when running
2) RDP - when trying to connect to a host, I receive the error "cannot connect with current connections settings. To change your connection settings, tap settings".
Note, email & internet works okay, so I don't know where my problem lies.
Boots to Pandora splash screen with the following message
Pandora http error occurred code: 417 startupAsyncTask
Worked prior to 2.2
Running 2.2 OTA with PRI 1.34-rooted then installed RUU trying to restore PRI to 1.4
Tried uninstalling, reinstalling
Clearing Data and Cache
Any ideas?
SOLVED-8/14/10
So after trying many, many things including several uninstall/reinstall deleting cache and data in the Pandora app and many ##786# while trying to get to 1.4 wiping the user data I got it.
The solution was to boot into recovery and clear the cache here. My guess is that some trace of Pandora was still left and was screwing things up.
For those that don't know how to do this:
1. Unit off hold down the volume up and power button at the same time.
2. This will boot the android on skateboard screen
3. With Bootloader highlighted -the default setting-hit the power button
4. Give it a second and it will HBOOT
5. Use the volume down button to navigate and highlight recovery and hit the power button.
6. If you get the red exclamation in the triangle as I did hold down volume up for a couple seconds and hit the power button while continuing to hold the volume up
7. You will now be in the recovery mode, navigate down to wipe cache partition and hit the power button
8. Reboot and you should be good.
translux said:
Boots to Pandora splash screen with the following message
Pandora http error occurred code: 417 startupAsyncTask
Worked prior to 2.2
Running 2.2 OTA with PRI 1.34-rooted then installed RUU trying to restore PRI to 1.4
Tried uninstalling, reinstalling
Clearing Data and Cache
Any ideas?
Click to expand...
Click to collapse
sorry, confused. What rom are you currently running? Are you doing anything funky, like installing the app on the sdcard?
Thanks for the prompt reply.
Installing Pandora from the marketplace
I was running rooted ota 2.2 and had this issue.
Used the recovery utility and wiped and reinstalled stock 2.2 hoping the pri would update to 1.4 and am still having this issue.
Really strange.
I'm getting this error after switching to midNight ROM with EXT4 file system. Clearing the cache does not help. Uninstalled, reinstalled. Uninstalled, cleared cache, reinstalled.
The weird thing is that it worked one time right after flashing the updated ROM and then the next (and every time after) I get this error.
I am getting this error 417 on my Archos 101 android tablet running Froyo.
The thing is, I installed Pandora on my Dads tablet, he got the same error. However, after he went home, he called to report that it is working.
My suspect:
Something in the port forwarding or firewall (I'm using Smoothwall Express 3.0).
I'd love to hear anyone's input and things to try.
I havent tried my Pandora install on another network other than my home. That would tell me if it's related to my network, but I don't know how to troubleshoot beyond that.
Thanks for any help or responses.
I got the Tablet this morning, and was very happy that it arrived so quickly. However, it seems that there is a several bugs in the system that I don’t know what to do about it.
Yahoo messenger will install, allow you to enter your log in information, but will get stuck on yahoo screen with the smiley face, and “loading contact list.” but will NOT load in. Skype and Nimbuzz works fine BTW.
Pandora Radio will not load at all, and will give several error messages. Boots to Pandora splash screen with the following message Pandora http error occurred code: 417 startupAsyncTask
Sling Media player will log in but won’t load the video.
Since I’m deployed in Iraq, it would be much easier to try to fix the problem before thinking of returning the tablet, so, I used Rom Manager, and tried clearing the cached data associated with it. Restored to factory setting. Then I got in contact with Yahoo who after 2 hours of tech support cannot tell me why this is happening. Pandora referred me to Samsung, and Sling Media don't offer support for the tablet, they only offer support to their software. I really don’t have the time and tools to chase tech support from here. Can someone HELP PLEASE?
REALLY SOLVED-Pandora-http error occurred code: 417 startupAsyncTask
After months and months of trying to resolve this issue on my Samsung Vibrant phone, I discovered the true cause of the problem in my case, and it wasn't the phone at all.
It was due to my transparent proxy server.
I use Smoothwall Express 3.0 for my firewall and utilized the built in transparent proxy services. Whenever I used the Cellular network, Pandora would work just fine. However, whenever I used the WiFi network (With transparent proxy services) I would get the "Pandora-http error occurred code: 417 startupAsyncTask"
Since most Cellular networks don't use proxy servers, if you find Pandora works with no issues with WiFi disabled, then consider that the problem is with the network the WiFi is connected to and not the phone. Most likely there is a transparent proxy server in operation somewhere between you and the Pandora servers.
I believe that you are correct because I'm also running Smoothwall express. Perhaps I can figure out how to get the traffic to bypass through. I'll report back if successful!
Awesome find!
I was trying to fix "Generic Network Failure" so I could download pictures of a car I want to buy from messaging. I'm running Energy ROM and I cannot find where to update PRL on this rom. I tried doing ##3282# then entering my MSL, luckily I have it memorized, since I can't download MSL Reader. But when I go to Data Connection and it starts gathering the Settings, it gets to 9% and crashes.
What other options do I have?
I've searched several threads, but can't figure out what I'm doing wrong.
Both devices definitely 100% rooted with superuser working fine, permissions granted for all apps.
I installed wifi_tether_v3_1-beta14.apk on the phone.
Device Profile: Evo 4G
Setup-Method: Initially I tried Softap (master). That's the same as infrastructure mode, correct?
Default SSID (AndroidTether)
MSS Clamping checked
Routing Fix checked
If I attempt to run it with these settings, I get a popup informing me the wifi hotspot started, but with errors. The log just says most of the wifi steps failed, I can post details if needed. I don't think it's really running - no upload/download indicator showing at the bottom of the app. My PC can't see the hotspot.
If I switch Setup-Method to Ad-hoc, it runs fine, no errors, PC can see it and connect to it. But KF can't connect to Ad-hoc... so lame.
So, I got ZT-180 Adhoc Switcher.apk for the kindle fire, to switch it to ad-hoc mode. Went to settings, told it to connect to AndroidTether. Switched to Ad-Hoc mode. It says "attempting to connect" ... after a minute it gives up and keeps retrying. The hotspot shows in the list of wifi networks, but it's hanging at "Obtaining IP address".
So, what's the issue? Infrastructure mode not working? Need to flash a custom rom? I read something about maybe needing a non-stock kernel? Upgrade or downgrade my radio?
I finally found a method that works, barely.
Wifi Tether (app listed above) failed.
Adhoc Switcher failed.
Wifi Hotspot Widget failed.
Elixir2's hotspot widget failed (connected but no surf).
The one that worked is free and doesn't even need root apparently: Foxfi.
I say it "barely" worked because even this has issues.
When I tried to create a password, it wouldn't connect.
But if I leave the password blank (no password) it does work.
http://foxfi.com/bin/
I just told it to start running, and left the SSID at the default (FoxFi98 I believe).