[Q] Wifi tether won't work, rooted KF and Evo 4G - Kindle Fire Q&A, Help & Troubleshooting

I've searched several threads, but can't figure out what I'm doing wrong.
Both devices definitely 100% rooted with superuser working fine, permissions granted for all apps.
I installed wifi_tether_v3_1-beta14.apk on the phone.
Device Profile: Evo 4G
Setup-Method: Initially I tried Softap (master). That's the same as infrastructure mode, correct?
Default SSID (AndroidTether)
MSS Clamping checked
Routing Fix checked
If I attempt to run it with these settings, I get a popup informing me the wifi hotspot started, but with errors. The log just says most of the wifi steps failed, I can post details if needed. I don't think it's really running - no upload/download indicator showing at the bottom of the app. My PC can't see the hotspot.
If I switch Setup-Method to Ad-hoc, it runs fine, no errors, PC can see it and connect to it. But KF can't connect to Ad-hoc... so lame.
So, I got ZT-180 Adhoc Switcher.apk for the kindle fire, to switch it to ad-hoc mode. Went to settings, told it to connect to AndroidTether. Switched to Ad-Hoc mode. It says "attempting to connect" ... after a minute it gives up and keeps retrying. The hotspot shows in the list of wifi networks, but it's hanging at "Obtaining IP address".
So, what's the issue? Infrastructure mode not working? Need to flash a custom rom? I read something about maybe needing a non-stock kernel? Upgrade or downgrade my radio?

I finally found a method that works, barely.
Wifi Tether (app listed above) failed.
Adhoc Switcher failed.
Wifi Hotspot Widget failed.
Elixir2's hotspot widget failed (connected but no surf).
The one that worked is free and doesn't even need root apparently: Foxfi.
I say it "barely" worked because even this has issues.
When I tried to create a password, it wouldn't connect.
But if I leave the password blank (no password) it does work.
http://foxfi.com/bin/
I just told it to start running, and left the SSID at the default (FoxFi98 I believe).

Related

WiFi is broken after rooting

After I rooted, my phone won't connect to WiFi anymore.
I started with the Cyanogen Mod (6.0.2). When I try to connect to a WiFi network, it tries to connect and gets to the "obtaining ip address" message, and finally fails to connect.
I figured I should try a different mod and completely wipe the card. So, I did this via Rom Manager. I had it backup and wipe, then install Skyraider w/ Sense. The same problem persists.
Does anyone have any ideas how I can troubleshoot this problem? Thanks!
Dumb question, but you did re-select the WiFi network you want to connect to, and re-entered the password for that network (if one is required)?
RMarkwald said:
Dumb question, but you did re-select the WiFi network you want to connect to, and re-entered the password for that network (if one is required)?
Click to expand...
Click to collapse
Yeah I have. I've tested this with multiple WiFi networks on each mod. It always gets to the point of "obtaining ip address" which to my understanding means the password has worked. Either way, I'll always long press to forget the password, and re-connect. Even disabling the password on the router still causes the same issue.

[Q] Rom with working VPN (PPTP) support

As stated in the topic I'm looking for a rom with working (!!) VPN support.
I currently have cm7.0.3 installed and can't connect to my VPN via PPTP or OpenVPN. Actually that is not correct... The icon in the statusbar states that I'm connected but no data will get through. I.e. doing a 'ping google.com' from the terminal emulator gives me an 'unable to resolve ...' error. same with any url in the browser and so on (no data connection).
one additional detail: via pptp i have to use encrypted connection ...
thanks for your time reading

Wifi Tether app "Ad-Hoc Failed"

So I've been using a wifi tether app that's convenitely named "WiFi Tether" for over a year now. Recently my phone started bugging out, so I wiped it (backed up my SDcard) and installed a new ROM and reinstalled WiFi Tether. Now I start up the app and it says it started with errors, please check log. I checked, it had like 6 errors, tweaked the settings, now I'm down to one error. That's the AdHoc setup failed.
I changed it to Softap and started it again and had 5 or 6 errors, went back to AdHoc, still get the same error and I'm frustrated. I've changed channel frequency's, enabled/disabled security, tweaked NAT settings, and still get that ONE error that's preventing me from tethering.
Download wifi tether for root users from its Google code page, version 2.0.7

[Q] I9195 - Unable to connect to WIFI network (Authentication error occurred);

So, here it goes.
My goal is to connect to a network using certain MAC address. Wanted network is marked with "open" and I know that it allows access only to certain devices (according to MAC) on which the administrator have gave a permission to. Once your MAC passes the verification, device gets connected to the network and then I'm asked to enter username and password through WEB browser (well known for me, because it is a procedure that I do on my other device, as well as all my colleagues do).
For example, I was allowed to provide one personal MAC address to administrator to connect to this network. I would like to set the MAC address of my other personal device and set it on my I9195 so that I can access the same network.
So, what have I done so far: I9195 is rooted, it has Android 4.2.2 on it and Busybox installed. I have changed MAC on it using following apps: MacChanger (blue WIFI logo), MAC Address Ghost (green ghost logo), using Android Terminal Emulator commands and via MAC Spoofer (black circle with green text logo). What can I conclude: As soon as superuser has granted the access to these apps, all of them manage to change the MAC. I've done the verification using Terminal Emulator. I also have to add that the MAC remains original if viewed from WIFI advanced menu BUT this shouldn't be an issue because:
1.) Colleague of mine is using his S4 (rooted etc.), while using MAC Address Ghost that does not change the original address (viewed from WIFI advanced menu) but he manages to make a spoof (verified from the Android Terminal Emulator, as all of this apps actually do) and he manages to connect without any problems in the same way as I connect with another device that I have!
2.) I had time to make a small test at home which put a light on the idea that the problem should be focused on the Samsung (and not on the router, especially because I am unable to modify anything on the router on this facility, not even restarting it). My home network works in a similar way as the network that we are discussing about. My S4 Mini has been included in it with his original MAC and it connects to the network without any problems. My other device is also included to the network using its MAC (the one that I am using for spoofing). My other device is turned OFF, router has been reset and I am normally accessing the network with S4 Mini. Then I run the MAC Address Ghost to spoof the MAC on my S4 Mini. In that moment, I have lost the connection that I had which means that the MAC spoofer actually did something. I tried to reconnect to the network but then I am asked to enter the password for my network. I have checked and re-checked it many times, tried to forget the network and doing it all over again but it does not accept the CORRECT password. Changing my MAC back to the original one connects S4 Mini back to the network, while accepting the password immediately.
Problem is represented in a way that it either says “saved” and does not connect to the network or every few times displays a message “Authentication error occurred”.
I have tried I would say every possibility that I’ve seen over the internet. That includes:
1.) Installing WiFi Connection Manager (it provided some info regarding the network that I wish to connect to: IEEE 802.11g standard, 54 Mb link and CH:11). I’ve used its function to fix the WIFI (advanced fix (root required)) but it didn’t help.
2.) All sorts of staying close to the rooter, while enabling and disabling the Power save mode (accessed via *#0011# command) or while having GSM signal.
3.) Browsing through system, data etc. folders to try to find the file that contains the MAC address information (like it did on older android versions in the nvram file). I’ve been unable to find this file or any sort of file that displays my MAC for the purpose to modify it.
I have a plan to upgrade Android to version 4.4.2 later today and make a test.
Please, feel free to suggest anything else! If I do not succeed, I will have to replace my S4 Mini with something else.
Kind regards,
QUICK REPLY: After installing CyanoGEN MOD 4.4.2, the problem remains!
I think there could be a shorter solution! On Sony Xperia Acro S with 4.1.2 Android it was just a matter of changing the MAC address within the file data/etc/wifi/fw! One minute modification...
So, please, if somebody knows the path to the file that contains MAC on CyanoGEN MOD 4.4.2 or on Android 4.2.2, PLEASE HELP!
Kind regards!

Wi-Fi won't connect -Wi-Fi Connection Failure

I'm having a huge issue. My Wi-Fi won't work on my 2013 Nexus. I select it. It sees it with a full signal and I put in the password, It just says saved. I tried with a connection without a password, it says the same thing. I tried flashing back to factory multiple times but it does nothing. It was working and just all of a sudden went out on me. Is there a way to flash a driver or something?
lowridincrew said:
I'm having a huge issue. My Wi-Fi won't work on my 2013 Nexus. I select it. It sees it with a full signal and I put in the password, It just says saved. I tried with a connection without a password, it says the same thing. I tried flashing back to factory multiple times but it does nothing. It was working and just all of a sudden went out on me. Is there a way to flash a driver or something?
Click to expand...
Click to collapse
Firstly, just reboot the WiFi access point and try to connect to it again.
Did you change firmware or any settings on the WiFi access point? Do other devices connect to it properly?
Can your Nexus connect to other WiFi access points? Try it with your mobile's WiFi hot spot.
Finally, we need some logs:
turn off N7 wifi
start logcat (I prefer 'time' format: adb logcat -v time > log.txt )
turn on N7 wifi
try to connect
stop logcat
compress and post the log here

Categories

Resources