I was trying to fix "Generic Network Failure" so I could download pictures of a car I want to buy from messaging. I'm running Energy ROM and I cannot find where to update PRL on this rom. I tried doing ##3282# then entering my MSL, luckily I have it memorized, since I can't download MSL Reader. But when I go to Data Connection and it starts gathering the Settings, it gets to 9% and crashes.
What other options do I have?
Related
I have a verizon 6900 that I updated using NFSFAN's WM6.5 1.00 FINAL ROM and now I cannot get the internet to work. I went back to the factory 6.1 and was unable to even make calls, so I spoke with verizon and got the phone working but they were unable to get the internet working. I flashed the ROM with the WM6.5 1.00 again and ran a couple different provisions and I still cannot get the internet. Can someone please help.
Sorry it keeps asking for username and password.
internet
VZW can tell you the user name and password its something simple like vzw3g or something. If you have that setup correctly you may be in the same boat im in. I can not connect to the internet. I did a hard reset some time back and lost the ability to data connect. I contacted the vzw techies who could not solve the problem, went into the store who could not solve the problem, went back to the "techs" on the phone who could not solve the problem. They all said it was my software which I think is bs. The problem is not my software because my phone tries to connect to their network and I have no known software issues. It has to be on the network end where the network wont recognize my phone. I quit working on the problem because I dont use data right now anyways and was on a pay as you go data plan so it was vzw's financial loss that i can not use data.
This fixed my Verizon Phone
1) dial ##778, enter in 000000 for the password
2) copy the ESN(Hex) Exactly how it is(you need the caps)
3) click View Info in the lower left corner and click M.IP Settings
4) Change MIP_MODE to Simple IP Only
5) Click View Info again and goto Security
6a) HDR AN AUTH User Id = [email protected] (fill the 5's with your 10-digit number)
6b) HDR AN AUTH Password = (Your ESN(Hex) With CAPS)
6c) PPP USER ID = [email protected] (Same as above)
6d) PPP PASSWORD = vzw
I left DUN log on blank
Change settings under
7) Click OK in the top right corner and save and reboot.
Goto Start->Settings->Connections->Connections
9) Click Manage existing connections
10) Select Alltel Wireless and click Edit...
11) Click Next in the lower right cornder until you get to the user name and password screen
12a) Username is [email protected] (Same as above)
12b) Password is vzw
13) Click Finish in the lower right corner
14) Enjoy verizon wireless internet!
Also make sure you update your PRL to an verizon one.
Go to M.IP Default Profile.
Enable Profile: Enable
NAI: [email protected]
DUN NAI: leave blank
But know I cannot update my radio. This has been an issue since I unlocked my phone. I cannot get the bootloader to load from my 1 GB microSD. I am not sure what to do. XV 6900
I have had this problem for months now.I have tried everything possible. Called vzw i dunno how many time I dunno how many new A-keys I have had.I even tried these settings. Nothing seems to be workn.But who knows. Only way I can get internet on this phone is to manullay put my phone in 1x. which is way slow but it works
I got everything working great now. I ran the .40 unlocker and then flashed back to the factory ROM from HTC. I entered all of the setting back into the phone that I listed above and then flashed it again with the factory ROM. All of this put my phone back to factory. I then re flashed it with the 2.31 and was able to update radio and flash with the 6.5 ROM from SD card in phone.
My phone was working fine for a week or so. I had flashed a Legacy SERO phone over to this phone. Suddenly today the 3g icon disappears and under phone status, the mobile network state is always disconnected and I no longer have 3g data or MMS. Voice and SMS work fine.
The original donor phone works fine too (3g / MMS).
I've tried:
- flashing back to stock
- trying to reprogram NVItems (HA/AAA/Mobile IP stuff) back onto Note 2 (I think they were already there and I didn't change them, but it still doesn't work)
- tried to copy the APN for the donor phone over: but I cannot find a way to program APN on the Note 2, and isn't APN for GSM anyway?
- tried to copy the PRL from the donor phone over: but I cannot find a way to program PRL (tried DFS 4.0.1.1, which cannot read nor write the PRL)
This is really frustrating without data, can anyone help?
Chanman said:
My phone was working fine for a week or so. I had flashed a Legacy SERO phone over to this phone. Suddenly today the 3g icon disappears and under phone status, the mobile network state is always disconnected and I no longer have 3g data or MMS. Voice and SMS work fine.
The original donor phone works fine too (3g / MMS).
I've tried:
- flashing back to stock
- trying to reprogram NVItems (HA/AAA/Mobile IP stuff) back onto Note 2 (I think they were already there and I didn't change them, but it still doesn't work)
- tried to copy the APN for the donor phone over: but I cannot find a way to program APN on the Note 2, and isn't APN for GSM anyway?
- tried to copy the PRL from the donor phone over: but I cannot find a way to program PRL (tried DFS 4.0.1.1, which cannot read nor write the PRL)
This is really frustrating without data, can anyone help?
Click to expand...
Click to collapse
If anyone else runs into this, here's how I fixed mine:
I believe the problem was a combination of APN settings and the phone trying to go into LTE mode (which I don't have as a SERO classic user).
I had to turn off eHRPD and manually force the correct profile to load. I did this with:
##3282# => MSL => Edit => eHRPD (turn off)
then ##3282# => MSL => Edit => Others => LTE APN Settings => 3rd option (LTE - Sprint OTA). Oddly, before this change, none of the three options was checked, that could have been the source of my trouble.
Put it on CDMA mode only.
No cdma/lte. That will not work
I just installed the HTC_One_M8_GPe_Marshmallow-6.0_MRA58K.H14_AROMA-Installer.zip on my HTC Verizon M8. After doing so I can only get data via Wifi, it does not connect to 3g or 4g. I was wondering if this is a known issue if someone could direct me on what steps I should take to troubleshoot. I should mention that even though its a verizon phone I am using Smart talk.
Here are my current settings:
Preferred network Type: Global
CDMA Subscription: RUIM/SIM
Access Point Names : VZWINTERNET.
Network Operators : receive "Error while searching networks"
SIM status -> Cellular network state : disconnected
You used this version? http://forum.xda-developers.com/verizon-htc-one-m8/development/rom-vzw-stock-gpe-5-1-lmy47o-h9-t3212413
Did you do as the thread states:
[*] If you have issues with 3g/LTE data hand off, do a full RUU and do a factory reset with the stock recovery. Alternatively just flash the stock recovery and do a factory reset. Theory is the stock recovery rebuilds NV data. Getting a new SIM card has also been reported to work. Calling customer service and asking them to reset your connection has also been reported to help.
I'm having similar issues but I'm using page plus(Verizon network with Verizon m8 and only text and calls work but no data. Also using Verizon APN any suggestions
Hello, i just got a s6 edge + from sprint, unlocked.. But when i try to use the 4G data, it throws an error saying
"Unable to establish a wireless data connection"
LTE: ESM-33 EMM-x
Also i can't make or receive calls, just receive sms..
Any tip? any mode to fix it? thanks guys
What carrier are you trying to use?
If it's sprint download everything in this linknand restore APN. https://mega.nz/#F!cJFDnSSK
Address is in pic
How could you fix this? I am having the same problem.
I found this app very helpful (you will need root) https://play.google.com/store/apps/detailsid=com.cc.signalinfo&hl=en It is what has saved me many times as I run T-Mobile on a Domestic Unlocked SM-G928P.
UPDATE: 4G/LTE wouldn't work without erasing all possible APNs except Ting's (with some messing around to get settings correct). LOS14.1 continued to throw errors with this install though so ultimately re-flashed with RR and it's working perfectly now.
--
I'm trying to port an S4 Mini SPH-L520 (CDMA) for use with Ting. Has anyone successfully done this with full access to phone, text and data? Having updated the carrier settings while stock, then flashed LOS 14.1 I've got functional voice, SMS, WiFi and can see 3G sporadically when I refresh network settings, but 4G/LTE's a no-go -- I get a "Your mobile data service couldn't be activated" error from the setup wizard every time the phone starts. It's definitely seeing Ting's SIM card because it's showing the correct ICCID, but won't work at all in RUIM/SIM mode ("No service", "Select SIM Card" with no options) and defaults back to NV. Haaaalp? I'm very computer literate but cell phones are terrifying and mysterious black magic...