touch pro 2 screen question - Touch Pro2, Tilt 2 Windows Mobile General

I cracked my screen on my touch pro 2 last night and my touch screen still works fine, I just have 2 long cracks from the right of the screen to the left. what is it I need to replace to have my pretty touch pro 2 again?
I'm on Verizon and I don't have insurance so that's out of the question.
I've added some pictures of my screen.

that hella sucks. Give this place a try given that you know someone that can install it. When I broke the screen on my Shadow, I was able to take it down to a cell phone repair shop and they took care of the ordering of the screen and instillation. If you want to get an idea of the prices you can check the following websites. Check your model number first to ensure proper fit. http://zlectronic.com/product/LCD-Display-Screen-+-Tools-For-HTC-Touch-Pro-2-T7373. For more options try the following: http://www.cellulardr.com/search.php?nobox=&scat=&stext=screen&stype=&sprice=&sman=7&pg=2 Best of luck

I was thinking about just doing it myself, I've never done anything like that before but I figured I'd give it a shot.
thanks for the sites.

If you are planning to make it yourself go to the Wiki and over there you´ll find a disassembly manual for Rhodium.
Good luck,

IS the Digitizer and lcd glued together? or are they seperate?
Because I had a touch pro (fuze) and the lcd and digitizer are glues together and I wasn't able to seperate them without distroying the lcd.
Had to order both digitizer and lcd.
you may want to open it up and see if there glued together that way you what to order.

I didn't have opened mine yet, but there was a discussion here and they saying it's pretty well glued. you'll need a hot air gun, good hairdryer or/and a very good skills with razor blade
you can't order just the broken glass. you didn't say if lcd is working too, but if yes, you may try to just remove the broken glass. it would probably be polarizer and it may work without it, with not as bright picture on sunny day.. may..
check ebay, in case, better order combo (touch+lcd) because there seems to be some optical compatibility issues.

Related

Broken Screen - Which part should i buy?

My GF broke the screen on her Droid Incredible, Verizon insurance wants $100 to replace it, so not sure it is worth it for this phone, and she has a few months left before her upgrade is ready. If i am going to try to fix it for her, can anyone with experience tell me what parts specifically I would need? The LCD seems fine, so i would think i can replace just the digitizer, which i can get on Amazon for $16
http://www.amazon.com/Incredible-Sc...ement-Adhesives/dp/B005TGX6X8/ref=pd_cp_cps_0
They also sell with front housing
http://www.amazon.com/Touch-Screen-Glass-Digitizer-Incredible/dp/B005L0XRRM/ref=pd_cp_cps_1
any tips which to buy or what to do etc?
Why would one/How does one know if they need to replace the LCD as well?
All touch aspects of phone working fine and seems like it's just the glass cracked.
Dillsnik said:
My GF broke the screen on her Droid Incredible, Verizon insurance wants $100 to replace it, so not sure it is worth it for this phone, and she has a few months left before her upgrade is ready. If i am going to try to fix it for her, can anyone with experience tell me what parts specifically I would need? The LCD seems fine, so i would think i can replace just the digitizer, which i can get on Amazon for $16
http://www.amazon.com/Incredible-Sc...ement-Adhesives/dp/B005TGX6X8/ref=pd_cp_cps_0
They also sell with front housing
http://www.amazon.com/Touch-Screen-Glass-Digitizer-Incredible/dp/B005L0XRRM/ref=pd_cp_cps_1
any tips which to buy or what to do etc?
Why would one/How does one know if they need to replace the LCD as well?
All touch aspects of phone working fine and seems like it's just the glass cracked.
Click to expand...
Click to collapse
I am no expert, but it would seem that if anything under the glass was broken, you would need to replace the lcd (that is, if you could see the lcd "leaking" or being distorted)
Sent from my ARCHOS 80G9 using Tapatalk 2
Nothing under the screen seems broken.
Anyone done this?
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Dillsnik said:
Nothing under the screen seems broken.
Anyone done this?
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Click to expand...
Click to collapse
Unfortunately I have had the pleasure of replacing my digitizer twice. You definitely wanna buy it WITH the frame or housing. The adhesive is like industrial strength and you will end up breaking the original anyways when trying to remove the digitizer from it. I have to warn you that doing this repair yourself will void your warranty. Make sure the digitizer you get comes with the tools required to get the phone apart. You can get this as a package on eBay fairly cheap too. There are about 3-4 circuit strips that will have to be removed from their clips, don't be intimidated by them, but be gentle. Your first time is gonna take you a while, just be patient. If you need to do it a second time, its gonna be a breeze. PM me if you have any concerns during your repair.
yea get a digitizer also,
I had the same thing happen to me, it was a pain but there are a few videos on youtube
that should help you through it, though it doesn't sound like its that bad
Definitely go with the digitizer and housing replacement together. Bottom line, it will make your life so much less of a headache while replacing it.
Sent from my ADR6300 using XDA
I just replaced mine this weekend. I attached some before, during, and after pictures...
These were the guides that I followed:
Part 1: http://www.youtube.com/watch?v=TfpPS7oO4Q8
Part 2: http://www.youtube.com/watch?v=GJMAmKpk20c
Personally, I went with just the glass/digitizer (your first link) and it went fine. The glass is difficult to get out of the housing, but it's not that bad. It probably took me 20 minutes to get the old glass out, maybe 5 minutes of cleaning goo from the old adhesive, and probably another 5 minutes to put the new glass back on.
Some Tips:
The pry tool that comes with it is very cheap. I would suggest using it sparingly until you get to the LCD panel extraction and glass removal. You want it to be as in good of condition as can be when you get to those later steps.
Use a blow-drier to heat up the adhesive, and get it to the point where you almost cant touch it. I used some yellow kitchen gloves so I could get it a little hotter and still be able to hold it. I used a combination of my hands and the pry tool and worked mostly along the sides and top first, then separated the bottom last.
The guy in the youtube videos uses glue, but you shouldn't need that. It comes with pre-cut adhesive strips, which work great. One word of caution though... The sheet that they come on is scored for you, but I suggest using an x-acto to cut them out. This is especially important for the thin rectangle that goes around the outside of the glass. You really don't want to pull on that... you don't want it to get stretched or twisted. Summary: the strips work great, just be careful extracting them from the sheet they come on, and placing them on the phone.
Don't forget to get the red earpiece grill off of the old glass before throwing it away. You'll need to super glue that back onto the housing, but it's really easy to see where it goes. This should be the only thing you need glue for.
When removing the glass, cleaning up gunk from the old adhesive, and applying new adhesive, be careful of the electronics at the bottom for your capacitive buttons... you definitely don't want to harm or obstruct those.
This should probably go without saying, but make sure not to touch the inside of the new glass, or the LCD panel. You don't want fingerprints or dust inside the phone. Even if you don't touch it, I would still give it a shot of compressed air right before putting it in, just to make sure there's no dust.
I would say that it's probably worth the extra $10-12 bucks to get it with the housing already included, but it's definitely not necessary if you want to save a little money. As I said above, it only took me about a half hour to get the old glass out and the new glass in, and from what it sounds like, there is still some effort involved even if you get it with the housing (moving the circuitry from the old one). I wouldn't worry about breaking the frame... it's pretty strong. If you break it, you're doing it wrong. Although, if your frame has some scrapes and other assorted road rash on it like mine does (see first picture), then maybe you might want a new one anyway. Another consideration... the reviews on Amazon for the one without the housing are much better, but that could just be because of people who don't know what they're doing... who knows.
If you have any questions, I'd certainly be willing to help... PM me if you want. And if I'm going to be around when you go to actually do the replacement, I can give you my gchat address in case you have any questions during the process.

[Q] How to replace GLASS ONLY on i9100?

Yep, I broke my galaxy. Screen and touch sensor works awesome, but screen is fully shattered. Searching at the forum gave me one positive result: http://forum.xda-developers.com/showpost.php?p=23644712&postcount=6
But i cant find any guide anywhere. If someone know how to make this kind of operation please leave your post or guide, it would be great. Thanks in advance!
Hello,
youtube is your friend
http://www.youtube.com/watch?v=65pvAINg2ME&feature=my_favorites&list=FLhOahoxI-440fS-S2edtp7w
glass only video - hmmm...
exeq said:
Hello,
youtube is your friend
http://www.youtube.com/watch?v=65pvAINg2ME&feature=my_favorites&list=FLhOahoxI-440fS-S2edtp7w
Click to expand...
Click to collapse
the above is for the digitizer w/glass - the below is for glass ONLY
http://www.youtube.com/watch?v=CfuTVjI_Wao
It is very risky to replace the glass only. Doing it this way increases the risk of damaging the AMOLED panel, either by overheating it or scratched/cracked by the broken glass. I've explained it before; if you want to replace the glass only, you'll need to separate the screen assembly from the frame first, then separate the glass from the AMOLED panel. You might end up breaking the panel anyway, so might as well replace the whole thing. But you can give it a go. It should be possible to remove the glass while keeping the AMOLED panel in the frame, because the panel itself is very fragile.
I replaced only the glass on mine.
igor45 said:
the above is for the digitizer w/glass - the below is for glass ONLY
Click to expand...
Click to collapse
Hi. This is my story about SUCCESSFULLY replacing only the glass of s2.
Background, you can skip this:
Few months ago I broken the glass of my beloved S2 in an accident, but because I had a screen protector the pieces of glass were kept together and the phone was 100% usable, only the image was distorted because of broken glass.
So I searched the available options: replace the whole display for a price of more than 100euro. Buy a defect s2 with good screen, but didn't found any lower than the previous price.
I had a previous experience with an Ipod Touch with the same problem, when I ordered the glass from ebay and went to a local phone repair shop that destroyed the Ipod. It was usable before going to that shop.
So I decided to give it a try and try to change it myself. I'm a programmer with what can be called poor electronic and hardware skills. So if I was able to do it, and you were able to find this post, you can replace it too. But after seeing some videos I had more confidence on my skills than of those repair specialists that were not careful with the other device.
First I found a clip on youtube about why you CAN'T change only the glass on S2. But I found also the above video with a interesting method, but it required a Molybdenum string that I couldn't found at a good price. Actually I believe that the shipment to Romania made the price to high for the string.
After researching I found the SOLUTION: on a page or youtube clip about how to remove the broken glass. But I've lost the link. Anyway, the procedure was simple. I remember that the video was about replacing the glass on a Galaxy S3.
So I ordered the replacement glass and some adhesive (finally not used) from ebay.
After I got the replacement parts, I opened the phone, you can find somewhere online the instructions how to do it.
For removal I used a pack of plastic poker card. It's needed something to not be to hard to scratch the digitizer, but hard enough to remove the broken pieces of glass.
I started removing the pieces around the Home button to get a feel of the process, and proceeded to remove all the pieces of glass and glue. It took around 3 hours to finish it and 48 cards. You need to lift the broken pieces with great attention and patience. It's not a hard job, but it takes time. Maybe with a hot gun is easier to remove, but when I received the replacement I was anxious to start and did not wait to procure one. During the whole process I kept the phone started to be sure that I did not broke the screen. In case of possible breakage or of a bad scratch I thought that I don't need to continue the procedure. Maybe is not recommended to keep it running, but it gave me a positive feedback that everything is ok.
After removing all the pieces of glass and glue I was able to see some fine scratches with a black background. I used some dust removing solution and then I attached the new glass. I only fitted the new glass on the place and I believe there were some glue left on edges that keep it in place because I did not added any other glue and it did not moved until now. With the new glass the scratches from the digitizer are not visible at all. And the phone works as new, the touchscreen was not damaged at all.
So it's completely possible to replace it.
Before fitting the new glass the cleaned touchscreen was like the touchscreen on S4: it was only needed to hoover with a finger at some distance above, but not touching . I remember that the replacement of my glass was before the release of S4 and when I found about this feature I knew that I already had something like this on my S2.
I don't remember having any other difficulties during the replacement except the removal of broken glasses. And I used this phone continuously without problems since.
Only last night the phone stopped charging and I had to replace the charging port, flex ribbon; but it was not related to glass replacement.
I don't remember if it was needed to open the phone for glass replacement because I opened it when it broke to inspect it and I opened it also few time since then for various tasks.
The total price of replacement parts was below 10$, with glass, screen protector and adhesive ordered from ebay. I ordered also a case to protect the edges for future dropping and was a smart investment. The pack of cards I had from poker set, but It shouldn't be so expensive.
Success with your replacement.
KAWIN tempered glass screen protector for SAMSUNG GALAXY S2
buffon95 said:
Yep, I broke my galaxy. Screen and touch sensor works awesome, but screen is fully shattered. Searching at the forum gave me one positive result: http://forum.xda-developers.com/showpost.php?p=23644712&postcount=6
But i cant find any guide anywhere. If someone know how to make this kind of operation please leave your post or guide, it would be great. Thanks in advance!
Click to expand...
Click to collapse
KAWIN tempered glass screen protector for SAMSUNG GALAXY S2 top quality with best price !
http://www.xkxfilm.com/en/samsung/40-41.html: :good:laugh:
Don't try this at home kids...
I now back to my desire z after the galaxy screen is toast. JUST the heating alone destroyed it. ... Now gonna buy the LCD/screen assembly and do it right.
Sent from my Desire Z using xda app-developers app
if you are not a technician, I suggest you give it to someone REALLY capable of, what do you mean it is not at all easy and the risk of doing damage is very high.
Otherwise follow the advice that was given to you, buy the whole block
Necro thread, but I agree, it is not worth doing so. In order to be done properly, you need to have a very thin wire to separate the two pieces. Not something i would do myself. Much better to replace the whole assembly instead.
Relevant
test

[Q] Huge crack across screen!Need some advice.

Dropped my phone on asphalt today and got a big hairline crack across the screen . (Attached pics)
It really hurts cause i always baby this phone and just the rush to get to work and in my car, completely missed my pocket.
The screen is still responsive to touch and seems to be working normal thank god the lcd screen wasnt damaged and the digitizer didn't shatter.
Got a few questions t
1) just wanted to clarify that the digitizer lies ontop the LCD screen?
2) and that is all that needs replacing?(from damage seen in the pics)
3) also mine is branded just HTC(no carrier, so it's international GSM version?)
4) would it matter if i bought a replacement digitizer meant for the at&t version or not?
5) should be getting a one x that had some water damage and is no longer working. would the digitizer from this phone be a viable option for me to use as a replacement or should i just order the part online.( I really want it replaced fast and if i have to order the replacement it will take about a week to 2 weeks to arrive in my country
so apparently i can't attach any urls until i make 10 posts or i'd show u guys the part i wanted to order but its basically just a screen digitizer from ebay with tools needed for about $17.86.(is that cheap, good or expensive price considering the item + tools)
can you guys please search for it on ebay?the title of the post/part is Touch Screen Digitizer Glass Lens Replacement For HTC One X S720 + Free Tools
the link above is the item i'm looking to order for replacement. is it the right part i'm looking at?and would that be all i need or is there anything else i should add?also quality wise would it be top pick or are there any better options available?
Attached some pics also.Advice would be greatly appreciated.
You are unlikely to be able to separate the digitizer and lcd without damaging the LCD.
A water damaged phone may have a water damaged screen.
Search one of the other broken screen threads for more information.
I've replaced several screens on captivate.easiest way is get replacement(LCD+digetizer) from ebay,Google procedure.watch or read as many times as needed to feel confident to take apart phone.the hardest part is seperating LCD from phone(they use adhesive to secure LCD to phone).I used razor to carefully cut adhesive.
Most components are plug&play.just follow guide completely,u should be fine.
My LCD was $85 on ebay.good luck.
Sent from my SGH-I897 using xda app-developers app

[Q] Suggestions about screen replacement

Hi everyone,
First, I hope there's not another thread opened about this, I promise I did several searches and couldn't find one that was close enough
I have some question about screen replacement.
My dad just dropped his note 2 and damaged the screen (really unfortunate, it was really a little drop!), so I was looking into buying a screen from eBay and replace it myself. yes, it's tricky, but not all that much imo (big +1 to the guy from the YT channel LE55ONS, his videos about this kind of stuff are amazingly well done).
So, the screen is broken, the display is not, but if I bring the phone to the rapair guy he will almost certainly replace the screen and the display for €200+
If I buy something like this
http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40
and replace it myself I can do the whole thing and spend some €50 tops.
I was thinking about this one
http://www.ebay.com/itm/Gray-Front-O...item3a7dc376c5
Here come the questions. Can anyone point me towards a good screen replacement for something around $20/30? Is the quality good? I asked the seller if it is actually gorilla glass 2 and he said yes.
Also, these don't have any connectors, the original one has 2. I can always use the connectors from the old screen, but if someone knows about a screen with connectors included, can they please let me know? There's nothing like asking to someone who has already done something like what I'm about to do.
Thank you everyone
Mine dropped from two feet and hairline cracked across the whole screen. I bought the full assembly LCD/digitizer. Did the repair per LE55ONS. AOK now. afterwards, i tried to pry apart the digitizer. In my Note II is is bonded with transparent gum covering the entire LCD. No way to replace only the digitizer.
rickyvee said:
Mine dropped from two feet and hairline cracked across the whole screen. I bought the full assembly LCD/digitizer. Did the repair per LE55ONS. AOK now. afterwards, i tried to pry apart the digitizer. In my Note II is is bonded with transparent gum covering the entire LCD. No way to replace only the digitizer.
Click to expand...
Click to collapse
If you buy the digitizer with the screen attached that's sooo much easier to replace, it's almost not even risky. But it costs somewhere around $200, the same as having it repaired by a professionist. Did you find a cheaper replacement?

Broken Screen + Digitizer?

Hello there, I've had this phone for about a good year now. However, back in January, I broke the screen. The touch does not work (except for one corner) and the screen is very badly cracked. I looked online for digitizers +LCD's, and I found a lot to choose from. I heard that its best to get one with the frame in tact, which I cannot find. My question is, How would replacing the screen work? How do you put the ribbons back together if you pry them off? (wifi antenna as well.) I would love to use this phone as my main one again, I am currently using a Huawei Ascend Mate 2. Its a good phone, but I loved my Find 7a. Any help would be greatly appreciated.
A friend of mine bought in China through Ebay, a screen with the digitizer to World Tradin or something like that, it cost about $ 50.
We did the screen replacement following a guide in iFixit, it was for replace the motherboard, but you can us it and when you reach the screen, it is removed after taking off the plastic frame that holds it (with care, it's fragile ). Double sided tape is needed to attach the new screen.
In YouTube you can find a guide for the screen replacement for Find 5 which can be used for reference.
It is easier than it looks.
Good luck. :good:

Categories

Resources