Related
Can anyone show how to flash through SD card my Blue Angel please...from wm03 to wm06? I was searching on wiki but there says nothignn about SD CARD... Can anyone simply show me how to do that? Which ROM to install and that stuff... MANY THANKS
never heard before flashing BA from SD,
Sorry...
i dont have cabel for connecting with PC :-(... and here i Serbia i cant buy a new one so i will never install WM06 :-(... Any HELP
At this point, your only options are:
find a cable if you want to flash the phone
send it to someone who has a cable so they can flash it for you and send it back
Hard reset
In case you have a preproduction HERMES and you can not update the ROM (due to the fact that your bootloader is <1.04) here the very easy solution:
***info removed, wrong device or mis-informed***
This also works for normal (non preproduction) devices but keep in mind that if the CID does not match the flashing might not work.
gully321 said:
In case you have a preproduction HERMES and you can not update the ROM (due to the fact that your bootloader is <1.04) here the very easy solution:
***info removed, wrong device or mis-informed***
This also works for normal (non preproduction) devices but keep in mind that if the CID does not match the flashing might not work.
Click to expand...
Click to collapse
man, you really misposted this......this is for hermes,, should'nt work at all on blueangel
hfzarx said:
man, you really misposted this......this is for hermes,, should'nt work at all on blueangel
Click to expand...
Click to collapse
This thread was back in 2008...was there any real need to reply to a 2 year old thread...probably not?
please help me restore my diamond (DIAM100), i flashed it with a CDMA ROM and it hangs at the black "Touch DIAMOND" logo screen. I can enter bootloader, what can i do? Please
If it goes to bootloader, just connect with usb cable and flash with a GSM rom while in bootloader
tonio94 said:
If it goes to bootloader, just connect with usb cable and flash with a GSM rom while in bootloader
Click to expand...
Click to collapse
it works just like that??? or i need a different Diamond custom ruu..? or another flash tool.. i will try this in the evening because now i can't, but i want to be documented when i begin
as tonio94 says, if you can manage to get in to the tri-colored bootloader all you need to do is to flash with a rom that supports your phone... did you remember to hard-spl you phone before all this "mess" or?...
Arju007 said:
as tonio94 says, if you can manage to get in to the tri-colored bootloader all you need to do is to flash with a rom that supports your phone... did you remember to hard-spl you phone before all this "mess" or?...
Click to expand...
Click to collapse
i'm not a total noob in flashing..i just did a mistake...(did not read the post...damn)
i can enter bootloader but i NEVER flashed a rom from bootloader,only from activesync, i don't know if when in bootloader the custom ruu recognizes the phone..or i need another flash tool. im really mad at myself...
i have Hard-SPL
skero666 said:
i'm not a total noob in flashing..i just did a mistake...(did not read the post...damn)
i can enter bootloader but i NEVER flashed a rom from bootloader,only from activesync, i don't know if when in bootloader the custom ruu recognizes the phone..or i need another flash tool. im really mad at myself...
Click to expand...
Click to collapse
No other tools are required. Just put your device into booloader and connect with pc. The bottom of the screen should read USB. At this stage just follow the instructions that you would normal follow when executing the RUU_exe.
I'm sure you have already done this before but here is a guide ....http://modmydiamond.info/index.php?option=com_content&task=view&id=12&Itemid=26&limit=1&limitstart=4
band27 said:
No other tools are required. Just put your device into booloader and connect with pc. The bottom of the screen should read USB. At this stage just follow the instructions that you would normal follow when executing the RUU_exe.
I'm sure you have already done this before but here is a guide ....http://modmydiamond.info/index.php?option=com_content&task=view&id=12&Itemid=26&limit=1&limitstart=4
Click to expand...
Click to collapse
10x allot for your positive feedback, i now how it's done, just i could not believe it is so simple, i thought i bricked my phone, i will try it this evening when i get home.
thank you again
Problem solved, worked to flash like a charm.
thank's
This thread can be closed.
@skero666: i never recalled you as a noob.. i was just trying to give you an easy answer, sorry if i wasn't clear enough.. (^^,) .. and yeah, if you ever manage to get to tri-color bootload then you'll allways be safe... you'll never brick it unless you never manage to get to bootload .. lol
skero666 said:
Problem solved, worked to flash like a charm.
thank's
This thread can be closed.
Click to expand...
Click to collapse
You were lucky - glad you got it sorted
what if it does not even go into bootloader mode? is there a way out of this?
cheers.
I need help changing htc raphael gsm to cdma
I have htc fuze with att provider. im wanna change carrier to boostmobile and keep using my phone. what can i do to change from gsm to cdma. help please.
hi im a noob and by mistake i installed
Installed OTA 1.47.651.1 Version Two - 30.2 MB From Sprint
so can any one point me in the direction to unrevoke or root EVO again
there are some threads and im confused do i have to wait or its already out there
Bloodsville said:
hi im a noob and by mistake i installed
Installed OTA 1.47.651.1 Version Two - 30.2 MB From Sprint
so can any one point me in the direction to unrevoke or root EVO again
there are some threads and im confused do i have to wait or its already out there
Click to expand...
Click to collapse
From what I have read there is currently not a method to root this update. Be patient though.
dam
ok TY
but i need the tethering... do you think if i erase it to original factory default i can unrevoked it againg
I haven't seen any evidence that it is possible to flash back to the original stock rom.
But please let us know if it works.
-------------------------------------
Sent via this here phone thingy on the interweb.
download easytether. you don't need root
+1 for EasyTether
-------------------------------------
Sent via this here phone thingy on the interweb.
well.... Done BUT i dont like it i have to install the app to the pc touse it and use the cable so ... i dont like it But for now thanx for the info its a temporary remedy
Bloodsville said:
well.... Done BUT i dont like it i have to install the app to the pc touse it and use the cable so ... i dont like it But for now thanx for the info its a temporary remedy
Click to expand...
Click to collapse
Usb connection is always the fastest connect plus you keep your phone charged. How hard is that
rutter9 said:
Usb connection... you keep your phone charged.
Click to expand...
Click to collapse
That's the reason I prefer it.
Hello
My phone's screen is stuck at opening htc logo. I never rooted it - shall I just flash it with standard stock rom? Would you please be so kind to point me in the right direction? Bless...
My kindest regards
Pete
Try booting without the sd card.
How old is the phone? What happened / did you do (if such is the case) for it to get like that? Etc.....
Sent from a dream.
Teichopsia said:
Try booting without the sd card.
How old is the phone? What happened / did you do (if such is the case) for it to get like that? Etc.....
Sent from a dream.
Click to expand...
Click to collapse
Tried that before without result...also did a factory reset but to no avail. Phone was just over a year old when it happened, got it from my insurance policy so it's possibly a refurbished one. I can't remember doing anything to cause this...
phosphen said:
Tried that before without result...also did a factory reset but to no avail. Phone was just over a year old when it happened, got it from my insurance policy so it's possibly a refurbished one. I can't remember doing anything to cause this...
Click to expand...
Click to collapse
You Need to provide the Cid number and the Main Version. Do You know how to Get that?
glevitan said:
You Need to provide the Cid number and the Main Version. Do You know how to Get that?
Click to expand...
Click to collapse
Sorry, no idea...
phosphen said:
Sorry, no idea...
Click to expand...
Click to collapse
Ok, enable USB debugging, plug the phone to the PC and then open a CMD ON the PC and type adb reboot-bootloader and once in bootloader type fastboot getvar all. You Need to post the INFOcidnum and INFOmain
How old is your phone? Isn't there still any warranty? If so you may try to contact your reseller, service provider or the manufacturer. If not glevitan may be your hero
glevitan said:
Ok, enable USB debugging, plug the phone to the PC and then open a CMD ON the PC and type adb reboot-bootloader and once in bootloader type fastboot getvar all. You Need to post the INFOcidnum and INFOmain
Click to expand...
Click to collapse
Sorry mate, I was offline for a whole day, just managed to get back on it
How can I enable USB debugging if I can get onto HBOOT menu only? Is it possible to switch it on from there? Saludos
phosphen said:
Sorry mate, I was offline for a whole day, just managed to get back on it
How can I enable USB debugging if I can get onto HBOOT menu only? Is it possible to switch it on from there? Saludos
Click to expand...
Click to collapse
Yes, from fastboot, plug the phone (You will see fastboot USB in red) type: fastboot getvar all
sounds like a boot loop?
try removing the battery, once you have done that re boot into boot loader from there you should see an option for recovery.you may want to do a full wipe and re flash the rom.:silly: keep in mind the initial flash normally will take the longest,best to leave it be for a few minutes while the phone adjust to the new settings,that sometimes will seem like you may have an issue, but patience most times is all that is needed.hope this helps.
rdub504 said:
try removing the battery, once you have done that re boot into boot loader from there you should see an option for recovery.you may want to do a full wipe and re flash the rom.:silly: keep in mind the initial flash normally will take the longest,best to leave it be for a few minutes while the phone adjust to the new settings,that sometimes will seem like you may have an issue, but patience most times is all that is needed.hope this helps.
Click to expand...
Click to collapse
It's not rooted, so I don't think that will work.
bananagranola said:
It's not rooted, so I don't think that will work.
Click to expand...
Click to collapse
excellent point,but if that's true what is he flashing?
rooted phone=flash capable non rooted =stock rom with no admin access. am i mistaken,if so slap me and call me susan,if not box that thing up and bring it back,and if that's not an option then warranty time.because that device is chap.
rdub504 said:
excellent point,but if that's true what is he flashing?
rooted phone=flash capable non rooted =stock rom with no admin access. am i mistaken,if so slap me and call me susan,if not box that thing up and bring it back,and if that's not an option then warranty time.because that device is chap.
Click to expand...
Click to collapse
Hello susan
Sent from a dream.
Teichopsia said:
Hello susan
Sent from a dream.
Click to expand...
Click to collapse
LOL,I guess i'm susan and my face now hurt.can you please elaborate a bit so i can also understand what i am missing.
rdub504 said:
LOL,I guess i'm susan and my face now hurt.can you please elaborate a bit so i can also understand what i am missing.
Click to expand...
Click to collapse
Well....
1- over a year old bought refurbished.
2- he never rooted. We could assume that it is s-off from the previous owner but all of us failed to ask that question making another assumption that he isn't s-off.
3- he did a factory reset which didn't work (whatever that means with an s-on device / with an s-off device it really messes things up).
4- glevitan is here. If he doesn't know how to fix it (and from the few active members that tend to lend a hand in these type of posts) there may be just a handful who could help out. Hence, the OP is in good hands.
5- when someone messes up their phone without knowing what happened nor how to fix it, you need to give more detailed instructions on how to get it done.
6- I'm guessing that the info glevitan asked for is to find the correct ruu for the member to flash and to get his phone back to working conditions. If that doesn't work, chances are it's a hardware problem.
Sent from a dream.
Teichopsia said:
Well....
1- over a year old bought refurbished.
2- he never rooted. We could assume that it is s-off from the previous owner but all of us failed to ask that question making another assumption that he isn't s-off.
3- he did a factory reset which didn't work (whatever that means with an s-on device / with an s-off device it really messes things up).
4- glevitan is here. If he doesn't know how to fix it (and from the few active members that tend to lend a hand in these type of posts) there may be just a handful who could help out. Hence, the OP is in good hands.
5- when someone messes up their phone without knowing what happened nor how to fix it, you need to give more detailed instructions on how to get it done.
6- I'm guessing that the info glevitan asked for is to find the correct ruu for the member to flash and to get his phone back to working conditions. If that doesn't work, chances are it's a hardware problem.
Bullet point,impressive. now a refurb with s off would mean a root from a previous owner?
"S-ON, which means it blocks you from flashing radio images — the code that manages your data, Wi-Fi and GPS connections. Switching your phone to S-OFF lets you flash new radios. Rooting doesn’t require S-OFF, but many rooting tools will give you S-OFF in addition to root access" So hince my question if attempting to flash a rom ,it would be a safe bet he would be rooted,because without it he would have no admin access,recovery or superser access and would not be able to complete the flash process.a factory reset would normally on a stock rom not result in a loss of the entire stock rom but only a loss off data i.e contacts apps etc. and with these things in mind it would seem to be a safe to assume its a hardware issue or a rooted refurb phone from a previous owner in a bootloop becauce a factory reset there would wipe everything?
Click to expand...
Click to collapse
Factory reset resets the phone to it's "as fabricated"-condition, wich means it wipes user data and cache on the phone. With or without root the procedure is the same and should usally not affect /system or /boot.
So we have to find out, if the phone is S-On/S-Off (phosphen, more information on the topic can be read for example here, second post).
Teichopsia said:
Well....
1- over a year old bought refurbished.
2- he never rooted. We could assume that it is s-off from the previous owner but all of us failed to ask that question making another assumption that he isn't s-off.
3- he did a factory reset which didn't work (whatever that means with an s-on device / with an s-off device it really messes things up).
4- glevitan is here. If he doesn't know how to fix it (and from the few active members that tend to lend a hand in these type of posts) there may be just a handful who could help out. Hence, the OP is in good hands.
5- when someone messes up their phone without knowing what happened nor how to fix it, you need to give more detailed instructions on how to get it done.
6- I'm guessing that the info glevitan asked for is to find the correct ruu for the member to flash and to get his phone back to working conditions. If that doesn't work, chances are it's a hardware problem.
Sent from a dream.
Click to expand...
Click to collapse
rdub504 said:
Teichopsia said:
Well....
1- over a year old bought refurbished.
2- he never rooted. We could assume that it is s-off from the previous owner but all of us failed to ask that question making another assumption that he isn't s-off.
3- he did a factory reset which didn't work (whatever that means with an s-on device / with an s-off device it really messes things up).
4- glevitan is here. If he doesn't know how to fix it (and from the few active members that tend to lend a hand in these type of posts) there may be just a handful who could help out. Hence, the OP is in good hands.
5- when someone messes up their phone without knowing what happened nor how to fix it, you need to give more detailed instructions on how to get it done.
6- I'm guessing that the info glevitan asked for is to find the correct ruu for the member to flash and to get his phone back to working conditions. If that doesn't work, chances are it's a hardware problem.
Bullet point,impressive. now a refurb with s off would mean a root from a previous owner?
"S-ON, which means it blocks you from flashing radio images — the code that manages your data, Wi-Fi and GPS connections. Switching your phone to S-OFF lets you flash new radios. Rooting doesn’t require S-OFF, but many rooting tools will give you S-OFF in addition to root access" So hince my question if attempting to flash a rom ,it would be a safe bet he would be rooted,because without it he would have no admin access,recovery or superser access and would not be able to complete the flash process.a factory reset would normally on a stock rom not result in a loss of the entire stock rom but only a loss off data i.e contacts apps etc. and with these things in mind it would seem to be a safe to assume its a hardware issue or a rooted refurb phone from a previous owner in a bootloop becauce a factory reset there would wipe everything?
Click to expand...
Click to collapse
Cfhappy said:
Factory reset resets the phone to it's "as fabricated"-condition, wich means it wipes user data and cache on the phone. With or without root the procedure is the same and should usally not affect /system or /boot.
So we have to find out, if the phone is S-On/S-Off (phosphen, more information on the topic can be read for example here, second post).
Click to expand...
Click to collapse
Sorry guys, but before hijacking this thread maybe you can go and follow the discussion in the off topic thread. The idea here is to lend a hand to someone that is stuck and a noob and this for certain not helping him. Let's keep it clean....
BTW, the only solution in his case is to flash the OEM RUU or make a goldcard and flash an unbranded rom. With no s-off there´s no other way.
Click to expand...
Click to collapse
I couldn't resist.
Maybe it's good practice for him to read through all to learn to discern right info from wrong.
Sent from a dream.
Teichopsia said:
I couldn't resist.
Maybe it's good practice for him to read through all to learn to discern right info from wrong.
Sent from a dream.
Click to expand...
Click to collapse
Yeah, that is right, but with the phone stuck in the splash I don´t think is a good time to think about learning. This experience will definitely be worth for him in the future. :victory:
i flashed lg kernel on my m8 by wrong now the phone dosent turn on
or reboot via volume + power
and the pc recognize it as "QHSUSB_BULK"
ANY HELP
U have probably turned ur m8 into a paperweight ? only thing to do now is keep pressing power button and volume. Try through pc cmd - adb reboot-bootloader just to see . Sucks mate hopefully it works out for you
LG kernel.....seriously !!!
Mr Hofs said:
LG kernel.....seriously !!!
Click to expand...
Click to collapse
was mistake
any help ?
Mr Hofs said:
LG kernel.....seriously !!!
Click to expand...
Click to collapse
error |: device not found
As soulja already said. Boot the phone to the bootloader and recovery. Reflash a rom. If that is impossible to achieve there is absolutely nothing we can do.
Mr Hofs said:
As soulja already said. Boot the phone to the bootloader and recovery. Reflash a rom. If that is impossible to achieve there is absolutely nothing we can do.
Click to expand...
Click to collapse
it wont boot or respond even for charger
Then it's proper dead.....
Good try the Adb command Adb reboot bootloader see if you can get into that but might be tricky
Edit.... Just seen your last post hope you have insurance
Won't something like this work on that device, of course downloading the correct HTC One M8 equivalent files?
qhsusb_bulk detection lg g2 fix
what dongle i need for it ?
But if the device is not even switching on its a no go right ?
Mr Hofs said:
But if the device is not even switching on its a no go right ?
Click to expand...
Click to collapse
Yeah.
I can recall also reading something some time ago about making your SD Card(External) the bootable one and then fixing the "internal" from there but I'm not sure if that will even work either, was for another device as well.
I don't think a lot of developers/"hackers" on here sat down trying to figure out solutions to a problem that isn't so frequent on this device. I mean, who would flash a LG "anything" on an HTC...
Just wondered if it might work out seeing as it at least "detects" that much from the phone. It's a type of Qualcomm recovery mode isn't it, QHUSB-etc etc
Figured that maybe it is in a "semi" on condition already, it's just that you can't do anything with it. But if it's completely broke then might as well take it into service center for repair. Don't know what you're gonna tell them though @escoda
Yep. From what i know on the htc one x, once you turn off the phone completely (no hibernation mode) and you plug it in the pc it goes automatically to a adb hibernation mode. That's why its in the device manager. So it reads the device but can't respond correctly. But to get a step ahead it's very necessary to turn the device on.
@escoda its not completely bricked yet. Just go to ubuntu and follow the guide mentioned from Brendm14. Like he also said you only need to download then those files for the htc one m8. Most qualcomm devices have everything on the same partition but you could probably examine or the bootloader and the other required stuff are the same partition number as in the guide. If so then you still just need to download the htc files and do it the same.
I dont know where you can get the htc files since I am/was an LG user.
wulsic said:
@escoda its not completely bricked yet. Just go to ubuntu and follow the guide mentioned from Brendm14. Like he also said you only need to download then those files for the htc one m8. Most qualcomm devices have everything on the same partition but you could probably examine or the bootloader and the other required stuff are the same partition number as in the guide. If so then you still just need to download the htc files and do it the same.
I dont know where you can get the htc files since I am/was an LG user.
Click to expand...
Click to collapse
Those files are present on any firmware.zip for the appropriate phone model.
Flashing just a wrong kernel would not do that. Something must have happened that messed with the bootloader.
r3pwn said:
Flashing just a wrong kernel would not do that. Something must have happened that messed with the bootloader.
Click to expand...
Click to collapse
what can i do ??
its out of warranty
escoda said:
what can i do ??
its out of warranty
Click to expand...
Click to collapse
If you have an extra SDcard laying around, I would be happy to help you try to get your phone working (see posts above).
r3pwn said:
If you have an extra SDcard laying around, I would be happy to help you try to get your phone working (see posts above).
Click to expand...
Click to collapse
yes i have SDcard ...
i tried Ubuntu and when i write (ls /dev/sd*) it return with /dev/sda /dev/sda1 /dev/sda2 /dev/sda5