pls help me. trying to upgrade my phone it shows v2.06 setial.any advice
Moved to the BA forums for better support.
Dave
the screen you see is the bootloader mode. that means your device is ready to flash. you can start flashing following the instructions in my tutorial thread linked in my signature.
the question is: how did you get into bootloader mode and not flash the device? was it an accident? are you stuck in bootloader mode? do you use xp, vista or 7? what rom do you have on the BA now, wm2003 or cooked?
Related
i urgently need your help with my htc prophet after I haven't found an answer in the portal already:
as my prophet (seller is vodafone) showed the vender issue when trying to upgrade i used the downgrade and unlock cid program i found here on the page. after step one, using the downgrade command my device no gets hung while start up, I can see the ipl/spl window, that's all. nothing will happen even after waiting an hour or trying to hard reset the device again. the os listed now is 1.0.13.21
my problem is that due this active sync doesn't recognize the device anymore, i cannot connect to it and as of this i cannot go on with installation...
need more info? please let me know!
troost said:
i urgently need your help with my htc prophet after I haven't found an answer in the portal already:
as my prophet (seller is vodafone) showed the vender issue when trying to upgrade i used the downgrade and unlock cid program i found here on the page. after step one, using the downgrade command my device no gets hung while start up, I can see the ipl/spl window, that's all. nothing will happen even after waiting an hour or trying to hard reset the device again. the os listed now is 1.0.13.21
my problem is that due this active sync doesn't recognize the device anymore, i cannot connect to it and as of this i cannot go on with installation...
need more info? please let me know!
Click to expand...
Click to collapse
i managed somehow to install the 02.47.11 rom, but it seems that the os isn't starting.
is it possible, that wm 5 got lost due the upgrade?
help, please
Dear bros,
Please help! i can't flash my rom to LVSW 20070507
my computer has installed zip and .Net2 already.
and i follow the instruction to upgrade, then it suddently said that i need to do recovery.
Then i also follow the steps and re-start my Hermes, it doesn't return to bootloader and reboot normally. Then i click skip on mu computer and then re-upgrade again, but the prcoess just repeats and repeats to ask me to do recovery.
Can anyone tell me which steps i have omitted????
my IPL - 1.01
SPL - 1.40 Olipro
Rom version - 3.22.200.4
Protocol version - 32.50.7018.00H
pls help me!
thanks in advance!
Read this : http://forum.xda-developers.com/showthread.php?t=299462
Sounds like you've made a brick - but probably recoverable... First we need more information...
1. Are you SuperCID?
2. Did your computer or phone crash or become disconnected during the original flash?
3. What error number is dosplayed when you try to flash?
4. When you boot the phone does it show NO GSM at the bottom right? (This may only display quickly so watch the boot process carefully), or does it show a radio ROM version such as 1.27.0.0?
5. Are you running Vista?
When you get this sort of info you need to move your question to the 'Dead Hermes....' thread. I'd also suggest reading a lot of it (even though it is long).
karay215 said:
Dear bros,
Please help! i can't flash my rom to LVSW 20070507
my computer has installed zip and .Net2 already.
and i follow the instruction to upgrade, then it suddently said that i need to do recovery.
Then i also follow the steps and re-start my Hermes, it doesn't return to bootloader and reboot normally. Then i click skip on mu computer and then re-upgrade again, but the prcoess just repeats and repeats to ask me to do recovery.
Can anyone tell me which steps i have omitted????
my IPL - 1.01
SPL - 1.40 Olipro
Rom version - 3.22.200.4
Protocol version - 32.50.7018.00H
pls help me!
thanks in advance!
Click to expand...
Click to collapse
ach2 said:
Sounds like you've made a brick - but probably recoverable... First we need more information...
1. Are you SuperCID?
YES, I am superCID
2. Did your computer or phone crash or become disconnected during the original flash?
No
3. What error number is dosplayed when you try to flash?
it's ERROR 302, update error
4. When you boot the phone does it show NO GSM at the bottom right?
nth happened, just a normal reboot and the phone is just as normal as before
(This may only display quickly so watch the boot process carefully), or does it show a radio ROM version such as 1.27.0.0?
5. Are you running Vista?
No, i am running WIN XP Sp2
When you get this sort of info you need to move your question to the 'Dead Hermes....' thread. I'd also suggest reading a lot of it (even though it is long).
Click to expand...
Click to collapse
AND i have read the above link so many times and i have followed all the steps, but don't know what happened....
pls help!
thanks!!!
karay215 said:
AND i have read the above link so many times and i have followed all the steps, but don't know what happened....
pls help!
thanks!!!
Click to expand...
Click to collapse
Answer the questions then, don't just skip by them hoping by some miracle someone will know what your PDA is suffering from and give you the answer. What guide did you follow?
Fix from LegolastheElf​
1.40.oli has a bug (because the original BL it was based on had a bug)...
You need to upgrade to Hardspl 2.10, then flash LVSW.
hope it works for you
Even though this beginner submitted a really vague problem, it was resolved without insults. Hooray!
man, my thoughts exactly!
thanks bro~!
but i even can't flash to Hard SPL v.7
the problem is the same....
it asks me to recover again and again.....
karay215 said:
thanks bro~!
but i even can't flash to Hard SPL v.7
the problem is the same....
it asks me to recover again and again.....
Click to expand...
Click to collapse
you need to put the (HardSPL) nbh on your sd card as HERMIMG.nbh and then execute sspl on your device, it should upgrade to HardSPL then
Hello, just to start I will say that I'm completely new to PDAs, because I got my HTC TyTN a few days ago. So I had WM5 and I installed WM6 from http://forum.xda-developers.com/showthread.php?t=320829
But then I saw the Schap's WM6 Pro 4.20 Roms, which had TouchFLO installed and tried to install the full version, when it asked for Bootloader version I ticked the SP 2.02/2.10 (or whatever it was), because it was the closest to my Bootloader version - 2.03 (if I'm not mistaken). It started installing but after few seconds it displayed me some error. I don't remember what was the error, I only remember that it said that something was corrupted. So I would really appreciate any help installing Schap's WM6.
P.S As I said i'm newbie with PDAs, so please if you try to expain what should I do make it a bit more .... simple .
I'd suggest using the detect spl option when you try flashing. If you still get an error I would highly recommend posting the details so you can get the correct help.
There are several ways to get in touch with a new rom.
Please read the wiki, there should be everything explained.
Hermes Wiki
If nothing works there is only one solution for me, yet.
Then I have to change manually to bootloader mode and flash the original latest provider rom. After this step I am able to flash a rom of my choice again. regards
"Error, Unknown version! You should pick safe SSPL" is the error that i get when I try the Autodetect. Should I try using safe SSPL or ... ?
I also forgot to mention that I'm using Windows Vista. I heard that there were some problems updating ROMs using the Windows Mobile Device Center, so perhaps this is the problem ?
To start with I strongly recomend you read the WIKI.
As first base you should install HARD SPL (again read the WIKI).
After you'll have hard spl on yor TyTN you should use autodetect.
(Make sure you are fully connected in Windows Mobile Device Center befor any of the above)
I've installed HardSPL guided by http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
but I still get the same error. I also changed the WMDC drivers with those from AS again beign guided from the above link. Should I tick the SPL-2.02/2.10/2.30 New Bootloader or what should I do ?
Flash using an SD card.
YES pick Safe SSPL, it will run through and be fine. Sometimes that happens.
Flash a stock WM5 ROM. Get into windows. Download HARD-SPL (2.10). Use the force SPPL option while activesynced (GUEST) to flash the BOOTLOADER. Get back into windows, and use the same procedure for the OS ROM. Use force SSPL while activecyned..
Hello everyone I am trying to upgrade my HardSPL by following the guide. I follow all the steps but when it is in the process of upgrading, I get a message stating it needs to be connected. Now, I know its connected as I have activesync open and it shows it being connected. Any help suggestions? I am new at this so I am trying to figure this out. Thanks all!
Try putting device into bootloader mode (soft reset and then quickly press vol. down) then connect it to pc. At the bottom you should see USB. After that, Run the RUU_exe.
can anyone draw me a picture with regards to upgrading the SPL on my phone from 1.40 to 1.93
I know it involves JumpSPL, but it asks for an address???
can anyone draw me a picture with regards to upgrading the SPL on my phone from 1.40 to 1.93
I know it involves JumpSPL, but it asks for an address???
I have the same problem. Any tourtial how to upgrade from 1.40 to 1.93?
I am not an SPL guru, so I could be wrong about this, but this is from the stickys at the top. Under one of the HSPL threads
IMPORTANT: all in all, I recommend you flash the original HardSPL, as that one is MFG and easier to deal with if there is some problem. only flash the 1.37 or 1.93 if you have screen issues.
if it was some other version and you still have issues after trying 1.37 and 1.93, then let us know in this thread.
Just Flash this...
Unpack this and click on the RUU, ensure your device is connected to active sync or Windows mobile device centre.
Should be straight forward enough.
GSM devices only
1.93 HERE
R3PUBL1K said:
Unpack this and click on the RUU, ensure your device is connected to active sync or Windows mobile device centre.
Should be straight forward enough.
GSM devices only
1.93 HERE
Click to expand...
Click to collapse
Just wondering is there any benefit or need to update to 1.93, I am using 1.40 currently and havent had any problems. But not sure if there is a particular reason to change??
hi all,
i have a mda pro (htc 9000) from T-mobile, during wm5 and many bugs
i have tried to upgrade, i find some update rom overhere and followed the
instructions, direct during upgrade the device comes up in bootloader screen
en got stuck, i have tried everything even reset e.t. still i cannot get out
of the boatloader screen, i have tried an wm6 rom but i gaot the message
checking the information on your device and nothing is happend anymore
still waiting for a long time.
i have no idea
please help
thanks
Download an official Shipped ROM meant for your Universal and flash it. It should then pass through the screen.
thanks for the tip, i find the rom, but it need for upgrade active sync installed
and that's the issue now, because active sync does do nothing now when the device is in boatloader mode.
IT UPGRADING NOW pfffffffffffff
after intestalling again active sync...
oeps
Read Wiki!
Read Wiki.
Use mtty...DOC format.
Flash original WM5 ROM.
THEN
CID unlock with upgradeutility Noid.
You are free to do almost anything.
Again Read Wiki.
Read hdubli ...thread for stuck in bootloader.
Read Roms from Cotulla thread....it's helpful.
As long as you have intact bootloader , don't panic...it is not dead yet.
thanks for the advise, i find the wiki and solve the problem.
on my old xp pc and installed active sync, the device was direct upgraded
and the orginal rom is back to the latest version.
i find also the 6.5 rom but for now it works