Related
Hi, all, i have problem with my SPV 700 (HTC 3600) - Trinity.. When I turn on it, I see only start screen eith HTC logo, (you'll see it in attachments) there is only M 05 B05, R 1.50.08.11, g 32.83.7020.20h, D 3.00, i can do nothing... I cant reflash ROM because my computer cannot find it, and instalation write updater is old, you must find newer updater.. When i install acivesync, it cannot find too, but my installers (5 downloaded) will start, but write Cannot find hardware. (or mobile phone). Is any program, to connect my htc, or reflash ROM?
I found Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full(p3600I) or some next, but every write cannot connect. Thank you very much.
Load from mini SD!?
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!
I cant go to tricolor display, i cant reset, i cant do anything, i thing it freeze.. sorry my english, im from slovakia. Or.. how I can go to tricolor mode? I try all combination clicks.
Power+Camera+reset button with ur touch pen
sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?
OverrideCrash said:
sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?
Click to expand...
Click to collapse
Man please read from instruction from the passage named HARD RESET, the button you are talking about its for software reset only!
Use the seq. Power+Camera+reset!Keep each button pushed and then use stillus for reset and you will get the Tricolor screen - but first format your SD like i describe in the post #2 and then copy your ROM on it!
exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
check this thread
http://forum.xda-developers.com/showthread.php?p=1923734
manos4596 said:
exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
Click to expand...
Click to collapse
Hard reset your phone first, then use the bootloader method(Camera+Power+Reset then in the bootloader connect the usb cable)!
First try this http://forum.xda-developers.com/showthread.php?t=299659
If not - read carefully the instructions from here:
- http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66 - all you have to know about hard SPL and how to do.
Anyway, also try to change the Rom image that you have used when you bricked your device!Try a new ROM by the date of release!
Thnx for the advice! I got it working. Before reading your reply I had started installing the original rom provided by htc (WM5). It installed correctly and at least i have my phone back. I will check your links about hard SPL (thanx ) but i had installed the gelly_01 rom before , not through vista though.
I will try to reinstall it.
It's getting late here so i will check it tommorow and infirm you.
Regards.
problem solved Its working now, but I dont know how i repair it
for unlock CID HTC_Hermes_SIM_CID_Unlock_v3a.zip (Its not compatibile, but my opinion is it unlock but dont repair rom) then i give there [P3600i] HardSPL v1.1.rar and end is Trinity_WM_6.1_NEW.OS_19965_Diamond_edition_by_Akeo_V3.1.rar all files are in attachments.
I give there HTC_Trinity_SIM_CID_Unlock_v1.zip too, before Akeo Diamond edition.
This can be closed now. Thanks for all thank you ! Here are lot of good peoples really thx
slimul said:
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!
Click to expand...
Click to collapse
Thanks a lot . i had the same problem but now my htc is back to life
i
i still have the problem with the rom , i just do every thing and don't work can any one cold help me
sorry the bad english
I have had a HTC model of the Excalibur for almost a month now. The first day I had it I went to the Comm Manager #5 (I believe the Sync option) was grayed out. I have tried active sync on 2 different PC's XP/vista and my laptop XP SP3 non will sync. I cannot access the SD card for anything but pictures taken with the phone. The Pictures can only be deleted from removing the SD card and putting in my card reader and deleting them manually. I can't get WMP11 to sync. I charges from USB fine but nothing else.
Phone appears to be brand new.
Specs:
Model: DodpodC720W
ROM: 1.33.422.1
WM 6.1 Standard
CE OS 5.2.19700
I have hard reset the phone 2 times this did not do anything but reset my settings.
I getting ready to get rid of it as it is less useful than my old phone.
Can anyone help me at all. All I want to do is add programs and music to the dam phone. Thank you.
change rom...
hi there.. all you need to do is re flash your rom or upgrade to a diferent one... i use 6.5 evolution series and it is really cool
Well since this seems to be the only way I appreciate the help. How about the application unlocked? How do I find out it is already? How will I install if not since I can't load anything?
OK i would love to upgrade my rom. It appears as though I need my PC to recognize the phone. Am I wrong? I am a noob when it comes to smart phones but not PC hacking. Please help me and thanks.
look in the sticky at the top of the forum....you need to do the bootloader option....if you have upgraded to 6.1 already...then load your original factory rom through the bootloader, and then once you reconnect after the flash, you should be able to flash the rom of your choice
Thanks but the phone came with 6.1 suggestion on what rom to load as the factory rom Since the Dopod rom is gone? Is there a universal HTC rom since this is a factory Excalibur. Again noob thanks.
My master boot screen reads
Excalibur Wifi
ONBL 1.33.0000
OK I guess I will try the HTC WM5 rom. If it doesn't work will it brick my phone? If it will then I will just sell the piece of **it on Ebay!
hazzmatt69 said:
OK I guess I will try the HTC WM5 rom. If it doesn't work will it brick my phone? If it will then I will just sell the piece of **it on Ebay!
Click to expand...
Click to collapse
Lol! It shouldn't brick your phone. If you are unsure if it is app unlocked, then run the app unlock procedures at the top of the forum in the first sticky. You won't damage anything running them on an already unlocked phone.
Or sell it to me for spare parts!
Ok thanks for the help. But how am I suppose to run applications that require Activesync??? It has never worked on this Phone. Charges fine through a usb connection. USBview shows no device connected in XP/vista on 2 PC's. HTC branded running a dodpod WM6 rom.
If this is a 6.1 ROM already try going to the settings/connection and select USB/PC. If there is an option for advanced functionality uncheck it.
Thank you but I have done this many times. Checked, Unchecked, Usb charging checked and Unchecked in all combinations. Turn off an on after each. Turn on all settings in comm manager as well as off.
At this point I am looking for a way to flash a Rom. I will be able to try a T-Mobile Dash WM5 rom and hope that works in some way or if I am even able to since the USB connection doesn't show. I don't understand why I would be able to charge but no error on connection or even that there is something plugged into any USB port front back or otherwise.
Check this thread out Matt. Might be just what you need. Good luck
http://forum.xda-developers.com/showthread.php?t=293387
This may sound silly but what OS are you using on your pc and what version of active sync are you using?
Thanks.
Active Sync 4.5 also tried an another version DL 5 separate times to check to make sure it wasn't a bad copy as I have read in the forums.
XP/Vista desktop XP Sp3 laptop XP Sp3 on girlfriends PC windows CE on my **ty UMPC (but didn't expect to see it sync to that).
All will charge the phone fine. None show that there is any thing plugged into the PC using USB view nothing in the Administrative tools show as being not installed. Tried 3 different usb cables all work fine with other items PSP old phone so on.
With XP you will need to use active sync 4.5, with vista active sync will not work, it requires another program (which I can not remember the name of right now).
Stick with one os for now and lets see what we can get going. I use Windows XP Pro with service pack 2 and active sync myself. I am not sure if SP3 may have broken something with this since I did not install it on any machine that I use with my phone.
You might want to consider the SD card flash procedure mentioned in a post above to update to a different rom. I am not sure I would go back to WM5 though, I would suggest another 6.1 rom or the new 6.5 rom and go from there.
Well that didn't do it.
Thanks finally got to try the SD flashing. No go!
1. Extracted all the files. (the TMO WM5 rom and the HTC factory.)
2. rename the .nbh file to EXCAIMG.nbh
3. Format sd card FAT 32 slow format.
4. Loaded only the nbh file only as well all files extracted.
5. Hold down the camera button and insert the usb as well as hold the camera button for 3 sec then press power.
Gives me checking the SD card but that is it nothing else.
Active sync. I doubt this will ever work if the phone doesn't show as being on any USB port in USB view
8125 & At&t tilt (friends phones) show as being plugged into a port.
I had my friend take a look at it. He has flashed his phones plenty and said sell the piece of **it.
Am I doing the SD flash correctly?
Any more Ideas before I sell it?
hazzmatt69 said:
I had my friend take a look at it. He has flashed his phones plenty and said sell the piece of **it.
Am I doing the SD flash correctly?
Any more Ideas before I sell it?
Click to expand...
Click to collapse
hmmm if you're gonna sell it i'll buy it from you. i need something extra to test roms on..if i can get it working. i don't believe phones are ever bricked beyond repair. if the hardware isn't broken then it is fixable.
Hazz, That's a truly odd situation.
So odd that I had the exact same thing happen to me just recently actually . I don't exactly know why it happens but I can tell you how I fixed it.
1- I hard resetted my fone (powering off the fone then turning it on holding the 2 soft keys and power button for no more than 2 seconds).
2- From that menu I reset to the default rom. I don't exactly remember the menu options but there should be a sticky somewhere in this fantastic forum.
3- After it returned to default, I was successfully able to connect to activesync (well, Windows Mobile Device Center for Windows 7/vista) and flash ookbas amazing 6.5 3v0lution rom.
you can find original roms here http://forum.xda-developers.com/showthread.php?t=381726 once you pick which one you need (i used the t-mobile one) put ur phone in bootloader. turn ur phone off and press and hold the camera button then power button then insert ur usb. Flash your rom. Then app unlock it using SDAunlock at the bottom of the first post here http://forum.xda-developers.com/showthread.php?t=523718.
Then dowload the newest 3VO 6.5 rom at the top of the first post and flash it and love it.
hi there
i just managed to install android onto a HTC "Kaiser" TyTn2.
everything i need seems to work fine except sound and wifi.
i installed RLS15 from http://forum.xda-developers.com/showthread.php?t=759894
using KaiserCustomRUU.exe
now there seems to be no sound. i called a number, and i hear nothing at all. i tried pressing speaker, and same no sound. vibrates working though. i also tried pulling the vibrate tab but it didnt work. still no sound.
about wifi, i have a Ad-Hoc network from my computer (which i can connect to from my ipod touch 3g - iOS4), but even after turning Wifi on in settings, it just doesnt seem to see my network....
btw i got no "welcome to android" or set up or anything... i did hold the DPad
any help?
I'm not sure but try out another Radio http://forum.xda-developers.com/showthread.php?p=9807696#post9807696 <---- Here
Flash it with HARDSPL or just using CustomRUU when in the tri-color screen.
I could be wrong but that's what I'm guessing
Wi-Fi... Wich kernel did you use?
Try out http://forum.xda-developers.com/showthread.php?p=9807696#post9807696 Post 118
And use the Androidupdate I attached, It's the one from Liquid wich should fix the Wi-Fi
Let us know if it fixed it
(God i had to edit it a million times before i did it right )
calls do definately go out. i called someone, i coudnt hear anything, and they called me back.
What do you mean by "Welcome To Android" ?
i read in some website that the first screen when booting android for the first time is Welcome to Android
Gaura Mohana said:
i read in some website that the first screen when booting android for the first time is Welcome to Android
Click to expand...
Click to collapse
In some builds, when you boot Android, it gives this kind of tutorial on how to use your phone (Wich has as title "Welcome to full android on Kaiser" for example), time and date settings and connect to Google account, It's possible that it isn't in the one you use
Don't worry about it, the welcome to android doesn't show when u press D-pad, the D-pad is to get into the menu when ur kernel is booting (the one with black background and white letters)
The menu is to install your system, make backups, clear dalvik and others
ok... but what do i do now about the sound? (and the wifi if posibble)
Gaura Mohana said:
ok... but what do i do now about the sound? (and the wifi if posibble)
Click to expand...
Click to collapse
Sound=New Radio
Wi-Fi is probably androidupdate
[SOUND]
Go to http://forum.xda-developers.com/showthread.php?t=393182
Scroll down until you see this: KAISER Radios These Radios were ripped from Kaiser WM6.1 ROMs.
Pick a radio and download it.
HARDSPL IS NEEDED FOR THE RADIO!
Extract the file and change the name from the NBH file to KAISIMG.NBH if the name is something else.
Copy KAISIMG.NBH onto the root of your sdcard and plug your sd card into the phone.
Hold down the camera button and turn the device on or reset it.
When you see a tri-colored screen, release the camera button.
When you see a blue text with something like RADIO (i guess) press the power button (just 1 little press, no long pressing)
The device will now update your RADIO, when finished just reset it.
Now reinstall your Android version by holding down the D-center button when asked, then selecting Install System and make it clear data.
[Wi-Fi]
Copy the androidupdate.tgz into your Andboot folder
Reboot the phone and press D-center button when asked
Choose the option to install update
Wait for it to finish and just press quit to boot Android
OMG DUDE!! thank you so much
Gaura Mohana said:
OMG DUDE!! thank you so much
Click to expand...
Click to collapse
no problem
hope it works
i just managed to put the KAIS_RADIO_ONLY_1.71.09.01.nbh (which i renamed to KAISIMG.NBH) and i put it on the root after a couple of hours figuring out how to make the phone show up in explorer
i tried starting exactly as you told me, but it boots directly to android - no tricolor. it worked fine before i installed android. so what do i do now?
Gaura Mohana said:
i just managed to put the KAIS_RADIO_ONLY_1.71.09.01.nbh (which i renamed to KAISIMG.NBH) and i put it on the root after a couple of hours figuring out how to make the phone show up in explorer
i tried starting exactly as you told me, but it boots directly to android - no tricolor. it worked fine before i installed android. so what do i do now?
Click to expand...
Click to collapse
I don't think there's another way, just, turn phone off, hold camera button in while pressing the power button once
Release the camera button after you see the colored screen
http://www.youtube.com/watch?v=bVMeZyuIMls
Doesn't show much more than I already said
Did you put hardspl on it anyways?
Thanks... What i managed to do was to simply get into the tricolors by holding power+home, then i connected to computer, and SPL'ed from CustomRUU. it worked, and sound is working. i tried your way but it woudnt detect my .NBH. thanks anyways
but where can i get a androidupdate.tar for the wifi for?
btw quick point, but my camera seems to work!!!! i remember reading that the camera WONT work on android. (it didnt work before installing the latest radio)
Thanks for the file. i just tried installing the liquid update from this post, and all i get is error under wifi (before wifi would turn on - but it kept on searching and found nothing). i did install a old update before this. could that have messed it up?
i also have a problem with USB mounting. I click turn on USB storage, and it works randomly. it works 1 time - doesnt work 10... replkuggin and stuff doesnt work. as in "Android Phone" is showing in Eject, but nothing is showing in explorer
EDIT
-----------------------
I just re-installed android and now installed the liquid update.
NOW wifi turns on, but it just scans (has been scanning for 5 minutes)
my ipod touch sees the network immediately.
Gaura Mohana said:
Thanks for the file. i just tried installing the liquid update from this post, and all i get is error under wifi (before wifi would turn on - but it kept on searching and found nothing). i did install a old update before this. could that have messed it up?
i also have a problem with USB mounting. I click turn on USB storage, and it works randomly. it works 1 time - doesnt work 10... replkuggin and stuff doesnt work. as in "Android Phone" is showing in Eject, but nothing is showing in explorer
EDIT
-----------------------
I just re-installed android and now installed the liquid update.
NOW wifi turns on, but it just scans (has been scanning for 5 minutes)
my ipod touch sees the network immediately.
Click to expand...
Click to collapse
Hmm can you tell me wich kernel you are using? 2.6.32?
Did you use the guide on Atools to make your nbh files?
Guide: http://forum.xda-developers.com/showthread.php?t=783514
Gotta go take exam right now so I'll be looking for this afterwards.
And since it's 06:24 here in the morning, we have a bit of a time issue I think.
I actually dont know what version i have, but i got it from some post on this forum, and it was the latest, and i did use atools.
I found this post http://www.google.com/support/forum/p/android/thread?tid=3b250c94811ca5df&hl=en
I am trying to use a ad-hoc network too, and i dont have any other type of wifi to try.
thanks
good luck with the exams(s)
EDIT- i have 2.6.32.9
Gaura Mohana said:
I actually dont know what version i have, but i got it from some post on this forum, and it was the latest, and i did use atools.
I found this post http://www.google.com/support/forum/p/android/thread?tid=3b250c94811ca5df&hl=en
I am trying to use a ad-hoc network too, and i dont have any other type of wifi to try.
thanks
good luck with the exams(s)
EDIT- i have 2.6.32.9
Click to expand...
Click to collapse
It could be that it's not possible to connect to an ad-hoc network, I've got no idea about that.
Hope someone else will post here and answer that.
U should really try connecting with a normal Wi-Fi network
Go onto the street and look for appartments or houses with open networks just to test?
i live in a small town..... no one here has internet let alone wifi....
aww that's balls
got no idea on how to try it then
Hello hello
I'm quiet noob in english and android ^^.
Since 2 days i'm trying to install froyo on my device!
I can't flash my device! I tried many differents .nbh files but no changes
I really need your help!
I'm following this tutoriel: http://forum.xda-developers.com/showpost.php?p=10424799&postcount=451
And this android version:Incubus RS16
this is the .nbh file used: http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
This is the screen i got when i try home+camera on boot: http://img713.imageshack.us/img713/4931/dscn2273.jpg
If you have questions..... Thanks for your helps!
Use this guide.
http://forum.xda-developers.com/showthread.php?t=680518
its better to download the latest KAISimg.nbh from ATools.
and make sure you have formatted your sd card to fat32 , in order to flash the kernel and install everything without errors.
Follow the guide in atools help.
Thanks for yours link
I follow them step by step but i still have the same problem!
It's amazing pls help me guys! i really need my phone.
hardspl 3.34 is ok Radio is ok
I follow atool tuto step by step.
When i put the sd card in the mobile and open the bootloader, the 3color screen appears net the white screen but he disappear in the last second
Any suggestion?
Verify the filename or maybe it could be a sd problem (try with another one)
Don't flash with SD, use USB instead. My Kaiser refused to work with SD, but works perfect over 50 flashes later with USB. I am using Windows 7, I just plug the kaiser in and let windows detect that something is there. Then I download the update for WM device center or whatever they renamed activesync to since vista lol. Afterwards it will detect well enough. Once it does I use RUU custom and just flash it over usb with that Kaisimg file. Not a well written guide I know... I can at least send you my ruu custom if you need it.
thanks for help
I'm under XP. I install active sync but inpossible for my device to be connected on the pc.
I'm losing my head lol!
levitz_kais said:
thanks for help
I'm under XP. I install active sync but inpossible for my device to be connected on the pc.
I'm losing my head lol!
Click to expand...
Click to collapse
as per your screen shot. you phone is in boot loader already.. active sync only detects phone wen its running windows.. you dont need to sync your device with active sync when its already in boot loader.. just connect it with pc and run update utility of windows rom u want to have on your phone.. or update utility with android kernel to boot android in it.. your phone will be working in no time..
Yep Activesync will see something is there but it isnt a WM device basically. That is good enough to let RUU Custom work.
Thanks guys i'll try this in the minute!
EEdit: it won't work can you explain me more how to install android with RUU custom? pleéase
levitz_kais said:
Thanks guys i'll try this in the minute!
EEdit: it won't work can you explain me more how to install android with RUU custom? pleéase
Click to expand...
Click to collapse
Format your SD Card in FAT 32
use HP USB Disk Storage format tool (find it somewhere over google)
Edit: http://files.extremeoverclocking.com/file.php?f=197
and make sure that the nbh is renamed as kaisimg.nbh.
For instance only put the nbh on your SD card (nothing else) and try flashing.
I am using HSPL 3.59 and its going good. (before that it was 3.34 and never caused any problems) Radio Version 1.70.19.09
Source code
http://www.multiupload.com/4ECGKXPYJW
[Steps]
Extract above tar.gz in / and then
Download CodeSourcy Compiler from here
https://sourcery.mentor.com/sgpp/li...rm-none-eabi/arm-2011.03-42-arm-none-eabi.bin
Install above C compiler then issue following command in source directory extracted above
make ARCH=arm tsunagi_defconfig
make -j16 ARCH=arm CROSS_COMPILE=/arm-2011.03/bin/arm-none-eabi- zImage
When this steps complete you will get zImage in arch/arm/boot folder
New Image Android 2.2.1 with Audio , WiFi + AP mode , Bluetooth
http://www.multiupload.com/HFZUWFNX0I
Just extract above file to \Storage Card and go to \Stroage Card\2.2 click on CLRCAD (4-5 times) and then click on Haret
(In this version there is no need to copy nvram.txt to \Storage Card)
New Image Android 2.3.5 with WIFI and Bluetooth
http://www.multiupload.com/QUT30LPS8K
extract to SD card and then go to \Storage card\fathom
Click on clrcad 4-5 times and then click on haret
For wifi it is must to copy \windows\nvram.txt to \Storage Card
if it is difficult to copy from windows folder use attached one
[Note : In this version i have disabled fb console so you will not see any text while booting so wait at least wait 5 min if none appears do soft reboot and then retry]
I have worked on Toshiba kernel and ported that kernel for LG fathom.
As of Now following Works
GSM (Partially)
Battery
TouchScreen
3D
Audio (only through front speaker)
Keypad (Need some work with Fn key)
Battery
USB (start haret while usb connected)
USB Mass Storage and ADB
wifi
Not working
Bluetooth
Vibrator
Issue( Solved now)
1) Screen will flicker when USB cable was removed. workaround is to set any live wallpaper.
How to run
extract files on Storage card
goto /Storage Card/tg01
click 4-5 times on clrcad
and then run haret-pre-0.5.3-20100625_144828-QSD8250-ONLY.exe
http://www.multiupload.com/GK0FCMUVX6
for wifi extract following file and put replace zImage with this one and copy bcm4329.ko to /system/lib/modules also copy \windows\nvram.txt to \Storage Card
Link for wifi
http://www.multiupload.com/DOEAA1JXCD
great work
great job dude. this was totally unexpected.
at this stage of development with such performance its looking like bright future for android on fathom. installed it...will check...
thankyou
Hello bro, i'm from india. I own lg fathom and i checked yours installing android on fathom. Plz could u explain it in brief and also mention minimum requirement of storage on storage card and the type of storage card. Plz mention it in detail. I tried to install it in first and it gave error "smd_alloc_v1: cid 47 does not exist". And at the second time the screen started flickering and hanged up there only. So plz tell me in detail. I have been waiting for long about this.
jaggu5789 said:
Hello bro, i'm from india. I own lg fathom and i checked yours installing android on fathom. Plz could u explain it in brief and also mention minimum requirement of storage on storage card and the type of storage card. Plz mention it in detail. I tried to install it in first and it gave error "smd_alloc_v1: cid 47 does not exist". And at the second time the screen started flickering and hanged up there only. So plz tell me in detail. I have been waiting for long about this.
Click to expand...
Click to collapse
hey bro...am also from India(delhi)
first download sdformatter software (search it from google) and then quick format ur sd card using it. now copy the tg01 folder(the folder that contains haret application) to it. now tap clrcad 4-5 times...it may show alert, click yes....or it may not....after that jus click the haret app.....it should work now....and first boot will definitely be taking several minutes but after tht its great.
ajeet17181 said:
I have worked on Toshiba kernel and ported that kernel for LG fathom.
As of Now following Works
GSM (Partially)
Battery
TouchScreen
3D
Audio (only through front speaker)
Keypad (Need some work with Fn key)
Battery
USB (start haret while usb connected)
USB Mass Storage and ADB
Not working
Wifi
Bluetooth
Vibrator
Issue(s)
1) Screen will flicker when USB cable was removed. workaround is to set any live wallpaper.
How to run
extract files on Storage card
goto /Storage Card/tg01
click 4-5 times on clrcad
and then run haret-pre-0.5.3-20100625_144828-QSD8250-ONLY.exe
http://www.multiupload.com/GK0FCMUVX6
Click to expand...
Click to collapse
hey vijay.....i wanted to add some donation in ur paypal account but due to same country i was nt able to....kindly send me ur mobile no. i will send credit in form of recharge...
and please somehow try to shift sound to earphone if not main speaker...thats the most annoying thing
Thanx for fast response. Any way I got it worked by formatting in PC selecting FAT32 and followed your steps and it worked.Really THANX man for this. Really I sweated alot to search this. But many things are not working like can't call or disconnect(It takes ages to call , don't know how to disconnect). Also 3G is not working. Can u PLZZZZZZ put a stable android os. Already gingerbread version came for HTC HD2. Can u plz upload a stable Android with all features working. Once again Awesome work Thanx and take care.
yup....many things are not working.....but its jus beginning and with time the picture will change...
u can use it for playing some cool android games like angry birds....
also a surprise i got- thats an mkv movie 1280x720p playing very smoothly...
again thank u for your reply bro. Plz update this thread regularly as possible and also post the new things you find as i'm new for this forum and new to this tweaking. Thanx for the post.
really nice work, i was hoping someone to port android on lg fathom...
thanx a lot ....... but do release a stable version of android .. best of luck
Hello,
i'am from Indonesia, and own LG fathom.
i hope you can always update this thread
Thanks
flickers!!!! a solution
if u r experiencing flickers when on non home screen applicatins, settings, etc
jus open the mplayer app and press the start{central} hard key so that it runs in background....now do whtever u want.... no flicker anymore.....it should not happen again but if it occurs do the same procedure
download complete
when i try do the steps, it says linux booting but then screen flickr
after two times restart now it can booting
hope it can running well
Thanks
rvin42 said:
hey vijay.....i wanted to add some donation in ur paypal account but due to same country i was nt able to....kindly send me ur mobile no. i will send credit in form of recharge...
and please somehow try to shift sound to earphone if not main speaker...thats the most annoying thing
Click to expand...
Click to collapse
The amplifier IC is LM49151 and i am not able to find the driver for the same once we will get driver for that audio problem will be solved..
Hey ajit bhai, plz update the thread as and when u find any modifications.
Hey guys, after when switch on to android it takes around 15 minutes to get the signal and recognised and when u cal, the end button does not work so for that u have to press hold and then press end button and then it works. And it does not support messaging and internet also. I just thought to say the problems bcaz its my first time abt tweaking. So plz anybody finds any solution plz do let me knw. Thank u guys for ur advancement.
rvin42 thank u again for ur reply. Plz anybody found any changes for this. What i mean is that you guys know that some of the features are not working on when u port into android like microphone, no message support, no internet support although it shows operator name and also no speaker, bit flickering but you can follow rvin42's idea. So plz anybody do something. Try anything guys.
downloaded and will test it in a while. i can test anything you want, i have lg expo and its just my spare phone. barely use it for movies. i also want android with DLP support!!
ran it and haret froze, then ran it again and booted but got stuck at creating new data.
Hello el_venga, hey lg expo has same configuration as fathom, so plz if u find anything new or modification abt the android plz let us know man. Hey by the way if u need any help u can ask here.
sometimes stays at Booting Linux and then it just restarts to WinMob and when it finally boots get stuck where the pic is. btw it has to be in flight mode to boot there.
h**p://***.mediafire.***/?3rhu2u1w6b1i4u7
fill in the *s.
not actually stuck but just keeps going and the number at the left gets bigger and bigger.
when it finishes screen just stays black.
el_venga said:
sometimes stays at Booting Linux and then it just restarts to WinMob and when it finally boots get stuck where the pic is. btw it has to be in flight mode to boot there.
h**p://***.mediafire.***/?3rhu2u1w6b1i4u7
fill in the *s.
not actually stuck but just keeps going and the number at the left gets bigger and bigger.
when it finishes screen just stays black.
Click to expand...
Click to collapse
this happened with me too....
wht i did was formatting my micro sd with sdformatter ....
then jus follow the steps...and dont forget to tap clrcad 5 times before u run haret...hope it works