I have installed iGo8 on the Mini, a lot of work on the sys but finally managed to make it work. I still have one problem, when navigating I don't see the position triangle. Any idea which sys line addresses that?
abunea said:
I have installed iGo8 on the Mini, a lot of work on the sys but finally managed to make it work. I still have one problem, when navigating I don't see the position triangle. Any idea which sys line addresses that?
Click to expand...
Click to collapse
can you publish sys.txt ?
I downloaded a data.zip file in 480x320 and a sys.txt file modified from a Russian forum and it works, but I have the same problem with the arrow. I'll check that file wranglers, thanks
Edit: Yeah I can see the arrow with yout sys.txt but, can I ask why is only 800 bytes and the one I had before 2.5kb?
Thanks wranglers. It works. I now see the position triangle.
NitroNitrous said:
I downloaded a data.zip file in 480x320 and a sys.txt file modified from a Russian forum and it works, but I have the same problem with the arrow. I'll check that file wranglers, thanks
Edit: Yeah I can see the arrow with yout sys.txt but, can I ask why is only 800 bytes and the one I had before 2.5kb?
Click to expand...
Click to collapse
Yours is twice as big becouse there are twice as much lines.
Could you give link to correct data.zip ?
now, it works for me.
not find a skin for the resolution 320_480
Upload data.zip
Thanks for that
iGO8 start error
My iGO8 wont start, the errormessage is:
Programm application database cannot be found. Please insert original application SD card.
I have a original iGO8 SD-Card.
What ca i do ?
my sys.txt:
[folders]
app="\Storage Card\iGO8"
sdcardpath="\Storage Card\iGO8"
content="\Storage Card\iGO8\CONTENT"
[rawdisplay]
screen_x=480
screen_y=320
class="landscape"
driver=GX
highres=0
stretch=0
[interface]
maxzoom2d=6000000
laneinfo_signpost_enabeled=1
3d_max_tiltlevel=9000
show_exit=1
resolution_dir="480_320"
vga=0
[3d_config]
roadsign_lines_per_screen=14
[3d]
car_day="quad.mdl"
car_day_ghost="quad.mdl"
car_night="quad.mdl"
car_night_ghost="quad.mdl"
show_guidance_strip=1
show_guidance_arrows=0
[map]
auto_nightmode=0
2dheadup=1
3dcarsizemin=1000
3dcarsizemax=6500
3dcarsizemul=50000
[sound]
sound_q_length=200
queue_length=250
ding=0
[feature]
signpost_coloring=1
[msnd]
enabled=0
Try to delete this section.
[folders]
app="\Storage Card\iGO8"
sdcardpath="\Storage Card\iGO8"
content="\Storage Card\iGO8\CONTENT"
super! but signal and battery does not fit, Has anyone experience how to change it to see visual and audible signal! ,
I hope it is and would appreciate an answer from you to get .... thanks
duro74 said:
super! but signal and battery does not fit, Has anyone experience how to change it to see visual and audible signal! ,
I hope it is and would appreciate an answer from you to get .... thanks
Click to expand...
Click to collapse
How/why are you using portrait mode? Those files are ready to work in landscape mode, I can see everything in my screen
NitroNitrous said:
How/why are you using portrait mode? Those files are ready to work in landscape mode, I can see everything in my screen
Click to expand...
Click to collapse
good, how much is version? I only have Nav N Go iGO 8.3.2.96054 version
I'm running 8.3.4.117940, not sure if it makes a difference though.
error after 10 minute of work
Hi all
I there somebody to help me? I tried two versions of iGO8 on my HD mini. Both ver.works fine, but only first ten minutes. Then the screen turns black (there is only time, batery, signal, GPS visible). But I can still hear navi instructions. After few minutes switch PDA off, because of automatic swich off in setting of device.
Than I can start the voice with black screen - press main switch.
But I cant do some else. I have to take the battery out, for restart...
Oops, now I downdloaded new zip files and all works...
NitroNitrous said:
I'm running 8.3.4.117940, not sure if it makes a difference though.
Click to expand...
Click to collapse
I think the problem is because Igo hasn't been designed to work on this screen resolution so somebody changed the data in the branding/data zips. So errors will occur but at least it works for now in Landscape.
Any idea how can I make the position triangle smaller?
Hello, I'm the new one...
Sorry to interrupt, but I thought this is the correct threat!?
I was using iGO8 (8.3.2.64873) on a HTC Magician (S100) and it was working perfectly (except some "out of memory"). Now I tried to use this version on a HD Mini - with the previously posted branding and data.zip; thanks for that, NitroNitrous.
When I start iGO8.exe, the startscreen appears, but right after it shows "INIT API" the startscreen is closed. I tried to modify the sys.txt, but this didn't help.
Does anybody know what I can do about it?
hohlbollen said:
Hello, I'm the new one...
Sorry to interrupt, but I thought this is the correct threat!?
I was using iGO8 (8.3.2.64873) on a HTC Magician (S100) and it was working perfectly (except some "out of memory"). Now I tried to use this version on a HD Mini - with the previously posted branding and data.zip; thanks for that, NitroNitrous.
When I start iGO8.exe, the startscreen appears, but right after it shows "INIT API" the startscreen is closed. I tried to modify the sys.txt, but this didn't help.
Does anybody know what I can do about it?
Click to expand...
Click to collapse
I think, try another version, what works...
Is there anybody, who has some SKIN for this HVGA resolution? Maybe DIMKA 480x320?
Moriarti-1 said:
I think, try another version, what works...
Is there anybody, who has some SKIN for this HVGA resolution? Maybe DIMKA 480x320?
Click to expand...
Click to collapse
What can I say: With another version, which works, it works!
Thanks, Moriarti-1.
(Seriously, the cause for crashing was missing licenses.)
Related
Extracted from HTC Touch Dual & It is an album to view your photos, thanks to JUVS
Check this out just installed it on my phone works great if you have installed FTouchFlo...if you click on a photo you can slide it to the right or left, if you spin your finger the photo wil turn..and you can scroll up and down...it works 100%
http://rapidshare.com/files/65505054/HTC__Album_mui_0409.cab
This is very old as this is the most recent on here: HTC Album mui 0419.cab
Im 100% yealous.
I have WM5 and it doesn't function. why? I need any framework?
wm6 only
sorry wm6 only....
beg to differ I am using it on WM5 with .NET 2.0 Compact installed.
Nice!
Thanks for sharing
works great!
Just FYI, some functions: (Correct me if i'm wrong)
Full clock wise circle is zoom in
anti clock wise is zoom out
half circles are rotate
oops
sorry nighthawk2050...
only on HTC?
Hi
i downloaded the file & installed on my Eten Glofiish M700
it installed successfully & shows icon in program list
but when i click th icon nothing happens .. no albubm program starts???
does it work on other devices with WM6 or only HTC??
any tricks to make it work on mine?
i did install on main memory
Thanks
cant help ya!!
sorry ahmed i can't help you...i just found out that HTCAlbum works on a HTC 3600 and wanted to share...i don't no wat the problem is on your mobile..you can try to ask JUVS he is the one who had the original HTCAlbum...
Nighthawk2050 said:
This is very old as this is the most recent on here: HTC Album mui 0419.cab
Click to expand...
Click to collapse
Ain't 0419 for russian language and 0409 for English?
Nighthawk2050 said:
This is very old as this is the most recent on here: HTC Album mui 0419.cab
Click to expand...
Click to collapse
do you know what "pan mode" is ? I don't know how to use it ....
Very nice. Work find on my Trinity ...
Thx !!
Works great on my trinity too.
Except for one function: the zoom one.
Anyone has managed to zoom in a particular part of a photo?
nope that is a recent english one as I am using it!
Pan means you can take a long shot of something by moving the camera left to right
riri22 said:
Works great on my trinity too.
Except for one function: the zoom one.
Anyone has managed to zoom in a particular part of a photo?
Click to expand...
Click to collapse
Yes, that works fine - but some practice is needed to make it with finger. Try with stylus first.
Nighthawk2050 said:
nope that is a recent english one as I am using it!
Click to expand...
Click to collapse
Can you link it here?
PANoramic ?
PAN appears when reading a photo in HTC Album..how could i take a shot if i'm reading my photos?
info
On my first post you will see the second image, you wil get that if you open a picture and dubble tap in the center, then press the "i" for info on how to use gestures....if you want to zoom in make a complete circle wit you finger clockwise..but if you want to zoom in on a small part of the foto..make a tiny circle on the picture on the part you want to zoom in....
Hi,
it seems like Navigon tried to implement WVGA resulution in their latest version of Mobile Navigator MN 7 v7.3.2 ... however, unsuccessful :-(
To make it work, unzip the attached "BinaryConfig.XML" and replace it on the device in the "\navigon\" directory... other files don't need to be replaced any more.
This fix applies only to v7.3.2!
regards jan
EDIT: I've replaced the first file by 3 others... the first is identical to the original posted here earlier, the others "stretch" mn7 to a mixture between vga and wvga, and to fullscreen wvga. Backgound (in German language can be found here)
to sum that up:
-people who like the version without stretching take the first file,
-people who like higher use of the screen and still want the full functionality (in landscape mode) take the 2nd file,
-people who like full-screen with restrictions to functionality (in landscape mode some software-internal scroll arrows can not be accessed) take the third file
regards jan
Indeed. The 7.3.2 did not launch and I had to soft reset my Touch HD.
Thanks for your files !
Do you know what are the changes brought by 7.3.2, otherwise than the WVGA resolution failed attempt ?
Does not work good.
But good Try.
Cool
Working perfect for me
Thanks a lot
where find 7.3.2 ?
thank you
taz22 said:
where find 7.3.2 ?
thank you
Click to expand...
Click to collapse
All updates (maps, software, ...) are done via Navigon Fresh.
thank you
very much
i m stupid
dodo34 said:
Does not work good.
But good Try.
Click to expand...
Click to collapse
what exactly do you mean?
Probably he means that - at least for 480x800 - not better than what was given at
http://forum.xda-developers.com/showthread.php?t=446487&page=15 post # 148
but anyway thanks for other resolutions.
Hallo,
how did you get the Touch HD running on 7.3.2?
I also run this config, but my Touch HD don`t recognize the internal GPS. What will I have to do that the MobileNavigator will find GPS???
Hello!
I´ve got the problem, when i want to start the MN7.3.2 in landscape mode, the mn7 goes for approx. 5seconds to horizontal mode, but starts in landscape. Then it rotates to landscape, but the mn7 is cut to the left half.
Has anybody an idea?
I use MaryOne ROM from HelloNasty, so it rotates for itself.
raz0r09 said:
Hallo,
how did you get the Touch HD running on 7.3.2?
I also run this config, but my Touch HD don`t recognize the internal GPS. What will I have to do that the MobileNavigator will find GPS???
Click to expand...
Click to collapse
if you haven't changed any gps settings on the hd itself and if you don't use any port splitter like serilot or glopus, it should work with the following manual gps settings in navigon setup:
GPS Type: Internal GPS only
GPS-Port: Com4: ActiveDevice
GPS Baudrate: 4800
TMC: None
at least that works for me...
good luck
regards jan
NoRescue said:
Hello!
I´ve got the problem, when i want to start the MN7.3.2 in landscape mode, the mn7 goes for approx. 5seconds to horizontal mode, but starts in landscape. Then it rotates to landscape, but the mn7 is cut to the left half.
Has anybody an idea?
I use MaryOne ROM from HelloNasty, so it rotates for itself.
Click to expand...
Click to collapse
You have to make sure that the screen is in landscape mode (which means not only hold the device in landscape, but have an open window (i.e. file explorer) which actually is displayed in landscape) BEFORE you start MN7, and it should stay like that all the time. MN7 gets "confused" when you change screen orientation during operation. maybe you should exclude it from your g-sensor app.
hope that helps...
regards jan
Update to MN7.3.2
I Have problems updating to 7.3.2.
Have copied the Software (7.3.1) to the HD in HDD-Mode and installed everything. Then Installed NavigonFresh on my PC and plugd in my HD in HDD-Mode. When I hit Update Navigon-Sofware I get the massage: "Ungültige Gerätedefinition" (=>Invalid Devicedefinition)
What am I doing wrong? Created an Account and everything. Do I Have to buy MN to Update?
MN7
What did I do wrong - Icopied the binaryconfig file as you said but when I launch MN7 still no display. Can you help?
HD switching off
Hi all,
Since I have installed navigon MN7, my HD does not switch off automatically anymore.. That's very bad for the battery. Any idea how to solve this problem?
Thanks !
See http://forum.xda-developers.com/showthread.php?t=446487&page=43 (hope this becomes a link), post #423. The hard reset may not be necessary; I did it because I wanted to clean the device of any unexpected effects which I was afraid would have been created by MN7 using the "wrong" xmls. Sorry I tried both on my PC (the installation program) and on my HTC HD (my trail version) but coud not find a menu option saying which version of MN7 I have!
Thank you hausen, it works perfectly on my Diamond2!
Hi all,
today i've bought a Navigon Mobile 7 for my HTC HD2, installed, updated via Freshstuff and till this morning my NM7 wouldnt start at all...i modified it with the files provided here (.xml) tried with soft and hard reset, uninstalled Copilot Live 8 (thought was a kind of conflict). The manual say:
- use 2 gb sd micro card to install the software..i've used 4 gb and 8gb...maybe is mandatory???
the program start and remain freezed fro few second (without any welcome screen, just the pda freezed...) then i checked in the task manager and i saw was in run using 2.49 mb of resources and i had to stop it few time...
now...any solution about? or i have to be again a bad guy and stop to buy software but just have to keep download cracked software?
Thank you all for the answers,
S. aka Dr. Dobermann...ANGRY...really ANGRY!
thanks
hausen said:
Hi,
it seems like Navigon tried to implement WVGA resulution in their latest version of Mobile Navigator MN 7 v7.3.2 ... however, unsuccessful :-(
To make it work, unzip the attached "BinaryConfig.XML" and replace it on the device in the "\navigon\" directory... other files don't need to be replaced any more.
This fix applies only to v7.3.2!
regards jan
EDIT: I've replaced the first file by 3 others... the first is identical to the original posted here earlier, the others "stretch" mn7 to a mixture between vga and wvga, and to fullscreen wvga. Backgound (in German language can be found here)
to sum that up:
-people who like the version without stretching take the first file,
-people who like higher use of the screen and still want the full functionality (in landscape mode) take the 2nd file,
-people who like full-screen with restrictions to functionality (in landscape mode some software-internal scroll arrows can not be accessed) take the third file
regards jan
Click to expand...
Click to collapse
might actually work
Hello there,
Which version of iGO8 works for the Rhodium?
I've tried various releases and still had not been able to make it work!
Thanks in advance
Yuval lavie
Yuuvi said:
Hello there,
Which version of iGO8 works for the Rhodium?
I've tried various releases and still had not been able to make it work!
Thanks in advance
Yuval lavie
Click to expand...
Click to collapse
Look in many of the threads already here. In general, you can say that all the official PDA releases work. These are 8.3.2.64029, 87762 and 97313. (Maybe more). With these versions a very basic sys.txt (as supplied with these versions) will work, as long as you add:
[device]
sdcard_dsk_num=7
(It took me three days to find this out...)
andrehj said:
Look in many of the threads already here. In general, you can say that all the official PDA releases work. These are 8.3.2.64029, 87762 and 97313. (Maybe more). With these versions a very basic sys.txt (as supplied with these versions) will work, as long as you add:
[device]
sdcard_dsk_num=7
(It took me three days to find this out...)
Click to expand...
Click to collapse
I had problems getting mine to work also. All I did was a fresh install, nothing edited in sys.exe, but I replaced data.zip with a newer version and it seems to be working fine!
I am ruining 8.3.2.93122 and it runs just fine.
Just to confirm it runs ok with version 8.3.2.1972 on the TP2 with these settings in sys.txt
[interface]
show_exit=1
[rawdisplay]
screen_x=480
screen_y=800
class="portrait"
[device]
sdcard_dsk_num=7
[folders]
App="Storage card/iGo8"
Click to expand...
Click to collapse
andrehj said:
[device]
sdcard_dsk_num=7
Click to expand...
Click to collapse
In fact, what does it mean ?
I guess it's giving iGO the correct location of the sdcard i.e. disk number 7.
(I'm also guessing) The other 6 disks will be internal storage/ROM/backup ROM/etc.
ok, but it´s strange as App looks for "Storage card"
Code:
[folders]
App="[i]Storage card[/i]/iGo8"
... it´s just to understand ...
Whatever I install, I keep getting "Initialization error: no language files were found"
any help ?
do you have insert(copied) a Lang_YourLanguage.zip
you will find this on
-iGO
-CONTENT
-LANG
greetz
Aight, so I fixed all these problems and the program works great with all maps etc.
but it doesnt know how to determine where I am..
I'm telling it to take me to some place, and it creates a way like I'm in Jerusalem, while im not there xD...
IGO8 dont find my internal GPS???
Hi,
the programm and the maps work fine on my TP2 but he always shows me:
no GPSdriver found!
Igo dont find my internal GPS, any ideas???
thx
look in the settings
Port 4
Baudrate 57600
Change in the registry
HKLM\System\CurrentControlSet\
GPS IntermediateDriver\Drivers\GPSOneDevice\
PollInterval = 100
and delete these (GPSLogFile.txt+
GPSLogFileBack.txt) files you will find in the \Windows\ folder
take a softreset, then run QuickGPS or if you have time
without QuickGPS...
greetz
hm...ty for the tip...
but nothing change!
igo shows me after autoscan:"no gps driver found"
on Google Maps it works fine with the internal GPS
Schnalle said:
Hi,
the programm and the maps work fine on my TP2 but he always shows me:
no GPSdriver found!
Igo dont find my internal GPS, any ideas???
thx
Click to expand...
Click to collapse
Schnalla,
What regional settings are you using?
For me strangly enough I found that when my local are set to anyting other then English iGo doesn't find the GPS receiver.
So try changing local to English UK or the like (might need a restart).
Then go to iGo GPS settings and run the automatic scan for GPS device.
It worked for me.
Once the GPS receiver is found you can change the Regional settings back to whatever you had before.
IGO8 Problem
Dear all,
I've got a IGO8 problem too. I've got the same version as up here. (The last version with a working TTS)
When i've touch flo 3d turned off (and using the basic windows mobile start screen) is IGO8 working perfect.
After turning on the touch flo 3d is igo working for a short time, but after an hour, when I try to start the application ==> I will get a error. I will get this message 1/2 second after pressing the igo icon and before I can see the loading screen.
the error is: "Failed to reserve virtual address space"
Can anybody help me to let it working with touch flo 3d? Or can somebody explain what the problem is?
Thanks in advance!
Ranney
ranney said:
Dear all,
I've got a IGO8 problem too. I've got the same version as up here. (The last version with a working TTS)
When i've touch flo 3d turned off (and using the basic windows mobile start screen) is IGO8 working perfect.
After turning on the touch flo 3d is igo working for a short time, but after an hour, when I try to start the application ==> I will get a error. I will get this message 1/2 second after pressing the igo icon and before I can see the loading screen.
the error is: "Failed to reserve virtual address space"
Can anybody help me to let it working with touch flo 3d? Or can somebody explain what the problem is?
Thanks in advance!
Ranney
Click to expand...
Click to collapse
I've found some information here: http://forum.xda-developers.com/showthread.php?t=526679&highlight=igo8
But is there an another solution to get it working without resetting the device or disable the TF 3D?
It must have a (Simple?) reason becouse it will work after a reset but not anymore after some time...
Thanks in advance!
Ranney
i am using the same sd card from my tp1 (nothing changed). igo 8.3 is working perfectly.
ranney said:
Dear all,
I've got a IGO8 problem too. I've got the same version as up here. (The last version with a working TTS)
When i've touch flo 3d turned off (and using the basic windows mobile start screen) is IGO8 working perfect.
After turning on the touch flo 3d is igo working for a short time, but after an hour, when I try to start the application ==> I will get a error. I will get this message 1/2 second after pressing the igo icon and before I can see the loading screen.
the error is: "Failed to reserve virtual address space"
Can anybody help me to let it working with touch flo 3d? Or can somebody explain what the problem is?
Thanks in advance!
Ranney
Click to expand...
Click to collapse
hi ranney
with which version tts is working on your tp2?
greez
emanuel
emanuel-paul said:
hi ranney
with which version tts is working on your tp2?
greez
emanuel
Click to expand...
Click to collapse
Hi emanuel,
I've got version 8.3.2.93112. But also problems with TTS now. When I set the voice in IGO to a basic version (non TTS), close igo, reboot, start igo and set it to a TTS ==> it's working. but after shutting it down and restarting ==> TTS is not longer working. (And after a day, IGO cannot be started anymore and the device had to soft reset to let IGO run again...
Ranney
Hi guys,
For those of you who still use iGO8 and haven't changed to Primo, I thought to share how the iGO8(480x272) looks on the HD Mini.
I've tested a few changes in the sys file until I've got iGO8 to look decent on the Mini considering the HVGA resolution and the fact that I didn't find a proper branding/data.zip out there with 320x480.
I thought 480x272 is quite close to 320x480 in landscape, the difference is only 48 pixels...
Have a look the the attached picture. You will lose 48 pixels on the bottom of the screen. If you still like it this is how you do it.
If you managed to start iGO8 go to your sys file and modify:
[rawdisplay]
class="rlandscape"
screen_x=480
screen_y=272
vga =0
highres=0
strech=1
If you didn't manage to start it, keep trying. These could be some reasons:
1. Make sure you installed it (in 2257 folder run autorun.exe)
2. Make sure you are editing the right "sys.txt" (it can be only one )
3. Make sure you have the folder ui_igo8/480_272 in you branding.zip and data.zip
If anyone knows better solutions please share.
Check this thread with other working skins with full view.
http://forum.xda-developers.com/showthread.php?t=946704
Wrong skins ...
MobileMini said:
Check this thread with other working skins with full view.
http://forum.xda-developers.com/showthread.php?t=946704
Click to expand...
Click to collapse
Sorry but these ones are for Igo Primo not for Igo 8.3...
But why "You will lose 48 pixels on the bottom of the screen."? There's a Dimkavert skin for hd mini and you won't lose any pixel. You'll see the app filling all the screeen.
Try to search on Google. If you don't find it I can send you mine which is working perfectly.
Cheers.
@otsart
I've tested the Dimka skins, which I already had installed on my IGO , but still they don't go full screen. I had a look on his website and his skins are not for HVGA (320x480/480x320). They are working on your mini because you probably have the 480x320 in your branding/data.zip (which I am not able to find anymore) and dimka's skins get stretched somehow. Maybe post the [rawdisplay] section of your sys file so that we'll see how come they work on HVGA.
Many thanks!
Many thanks for the files It Works perfectly in full-screen now!
a torrent file please!
MOD EDIT: You cant ask for warez on XDA
georgekzan said:
Many thanks for the files It Works perfectly in full-screen now!
Click to expand...
Click to collapse
Hi
i am searching the Data.zip / branding.zip for igo 8.3.xxx for resolution 320x480. (windowsCE)
Can someone help me pls
I know its a very old thread
ty
Anybody succeeded in installing this application on One X?
forster said:
Anybody succeeded in installing this application on One X?
Click to expand...
Click to collapse
yeah of course, you need root access, then use Root Explorer (or similar app) to edit the sys.txt located in /data/data/com.navngo.javaclient/
and then you need to have this in the sys.txt, replace the old part with this:
Code:
[rawdisplay]
driver=engine
screen_xy="800_480:1280x670/720x1230"
^^ That will keep your android top bar visible, both in portrait and landscape.
If you would want fullscreen, then use this:
Code:
[rawdisplay]
driver=engine
screen_xy="800_480:1280x720/720x1280:fullscreen"
Good luck!
EDIT: above edits are for when you are running your android OS WITHOUT the 3-dot button bar.
Also, you need to make sure you made certain edits to multimode.ini (not described in my post), or perhaps you have an apk that already contains those edits to multimode.ini.
IGO primo 2.0 Where did you found that?
Sent from my HTC One X
barty22 said:
yeah of course, you need root access, then use Root Explorer (or similar app) to edit the sys.txt located in /data/data/com.navngo.javaclient/
and then you need to have this in the sys.txt, replace the old part with this:
Code:
[rawdisplay]
driver=engine
screen_xy="800_480:1280x670/720x1230"
^^ That will keep your android top bar visible, both in portrait and landscape.
If you would want fullscreen, then use this:
Code:
[rawdisplay]
driver=engine
screen_xy="800_480:1280x720/720x1280:fullscreen"
Good luck!
EDIT: above edits are for when you are running your android OS WITHOUT the 3-dot button bar.
Also, you need to make sure you made certain edits to multimode.ini (not described in my post), or perhaps you have an apk that already contains those edits to multimode.ini.
Click to expand...
Click to collapse
Thanks!
It does start up at the moment, but closes (without warning/error) in about 5 seconds every time I try to run it. Resolution shouldn't be the problem. Any idea what could be the cause?
Am on LeeDrOiDs ROM.
rvdgeer said:
Thanks!
It does start up at the moment, but closes (without warning/error) in about 5 seconds every time I try to run it. Resolution shouldn't be the problem. Any idea what could be the cause?
Am on LeeDrOiDs ROM.
Click to expand...
Click to collapse
Try to rename your DCIM folder on your sdcard to something else... there might be some weird or corrupt image there (don't ask me why that has anything to do with igo though)
barty22 said:
Try to rename your DCIM folder on your sdcard to something else... there might be some weird or corrupt image there (don't ask me why that has anything to do with igo though)
Click to expand...
Click to collapse
This was the problem, After renaming the DCIM folder, everything is working just fine. Strange...
Does anyone else find this extremely heavy? We have the best phone on the market (graphics-wise) and the bloody interface stutters. Igo is obviously obsolete.
Ambious said:
Does anyone else find this extremely heavy? We have the best phone on the market (graphics-wise) and the bloody interface stutters. Igo is obviously obsolete.
Click to expand...
Click to collapse
You're kinda right, but it's the best navigation software for android hands down...
I think the problem is more in the navigation software than in the htc one x. Sygic is also not smooth at all on the htc one x. That's also the reason why I would love to see tomtom for android, but even though they promised it for this summer, I still haven't seen it.
I'm still having trouble configuring it, I tried a lot of multimode.ini / sys.txt modifications. I either get a 1280x720 not supported error, or it closes itself after a few seconds (renaming DCIM does nothing). I'm on stock ROM, not rooted, so I can only edit multimode.ini inside the data.zip archive. The .apk is supposedly made for 1280x720, but maybe I should use another one?
Any help would be appreciated. Thanks!
darthmelk said:
I'm still having trouble configuring it, I tried a lot of multimode.ini / sys.txt modifications. I either get a 1280x720 not supported error, or it closes itself after a few seconds (renaming DCIM does nothing). I'm on stock ROM, not rooted, so I can only edit multimode.ini inside the data.zip archive. The .apk is supposedly made for 1280x720, but maybe I should use another one?
Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
Have you rooted your phone? How did you manage to access the data folder on the phone?
Just curious.
Rgds.
Pushu.X
Sent from my HTC One X
pendragon1 said:
I think the problem is more in the navigation software than in the htc one x. Sygic is also not smooth at all on the htc one x. That's also the reason why I would love to see tomtom for android, but even though they promised it for this summer, I still haven't seen it.
Click to expand...
Click to collapse
Still, Waze works great and so does Google Maps, and the latter uses bloody 3D Satellite imaging.
The capability exists, it's just that most big-name navigation software (Igo, Sygic, etc) haven't really rebuilt their core engines from the bottoms up in ages, and rely on decade-old technologies.
Iceberger said:
This was the problem, After renaming the DCIM folder, everything is working just fine. Strange...
Click to expand...
Click to collapse
Do you have old pictures from another phone in DCIM folder? I had old photos from my old phone, until I moved them then iGO worked.
Apparently, photos with Geographic data will appear in the iGO map as POI, so that might be the problem.
darthmelk said:
I'm still having trouble configuring it, I tried a lot of multimode.ini / sys.txt modifications. I either get a 1280x720 not supported error, or it closes itself after a few seconds (renaming DCIM does nothing). I'm on stock ROM, not rooted, so I can only edit multimode.ini inside the data.zip archive. The .apk is supposedly made for 1280x720, but maybe I should use another one?
Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
[FIX] IGO Primo FULL SCREEN on HTC ONE X
if you want igo primo 2.0 on your htc one x just pm me and i'll be happy to help you.
// this because i can't share here files that work well ....
SbTro said:
if you want igo primo 2.0 on your htc one x just pm me and i'll be happy to help you.
// this because i can't share here files that work well ....
Click to expand...
Click to collapse
can you send me the link for primo 2.0
[email protected]
macavita said:
can you send me the link for primo 2.0
[email protected]
Click to expand...
Click to collapse
dude, and everybody, don't ask for pirated software on xda...
works
SbTro said:
if you want igo primo 2.0 on your htc one x just pm me and i'll be happy to help you.
// this because i can't share here files that work well ....
Click to expand...
Click to collapse
Works great.
tried it on a non rooted HOX
SbTro said:
if you want igo primo 2.0 on your htc one x just pm me and i'll be happy to help you.
// this because i can't share here files that work well ....
Click to expand...
Click to collapse
macavita said:
can you send me the link for primo 2.0
[email protected]
Click to expand...
Click to collapse
Any more talk of warez and bans might be handed out.
omar302 said:
Do you have old pictures from another phone in DCIM folder? I had old photos from my old phone, until I moved them then iGO worked.
Apparently, photos with Geographic data will appear in the iGO map as POI, so that might be the problem.
[FIX] IGO Primo FULL SCREEN on HTC ONE X
Click to expand...
Click to collapse
Works great. Thank you
Hi. I have a galaxy s with JB and i installed primo 2. It works ok exept the voice. can someone help me?