Anybody succeeded in installing this application on One X?
forster said:
Anybody succeeded in installing this application on One X?
Click to expand...
Click to collapse
yeah of course, you need root access, then use Root Explorer (or similar app) to edit the sys.txt located in /data/data/com.navngo.javaclient/
and then you need to have this in the sys.txt, replace the old part with this:
Code:
[rawdisplay]
driver=engine
screen_xy="800_480:1280x670/720x1230"
^^ That will keep your android top bar visible, both in portrait and landscape.
If you would want fullscreen, then use this:
Code:
[rawdisplay]
driver=engine
screen_xy="800_480:1280x720/720x1280:fullscreen"
Good luck!
EDIT: above edits are for when you are running your android OS WITHOUT the 3-dot button bar.
Also, you need to make sure you made certain edits to multimode.ini (not described in my post), or perhaps you have an apk that already contains those edits to multimode.ini.
IGO primo 2.0 Where did you found that?
Sent from my HTC One X
barty22 said:
yeah of course, you need root access, then use Root Explorer (or similar app) to edit the sys.txt located in /data/data/com.navngo.javaclient/
and then you need to have this in the sys.txt, replace the old part with this:
Code:
[rawdisplay]
driver=engine
screen_xy="800_480:1280x670/720x1230"
^^ That will keep your android top bar visible, both in portrait and landscape.
If you would want fullscreen, then use this:
Code:
[rawdisplay]
driver=engine
screen_xy="800_480:1280x720/720x1280:fullscreen"
Good luck!
EDIT: above edits are for when you are running your android OS WITHOUT the 3-dot button bar.
Also, you need to make sure you made certain edits to multimode.ini (not described in my post), or perhaps you have an apk that already contains those edits to multimode.ini.
Click to expand...
Click to collapse
Thanks!
It does start up at the moment, but closes (without warning/error) in about 5 seconds every time I try to run it. Resolution shouldn't be the problem. Any idea what could be the cause?
Am on LeeDrOiDs ROM.
rvdgeer said:
Thanks!
It does start up at the moment, but closes (without warning/error) in about 5 seconds every time I try to run it. Resolution shouldn't be the problem. Any idea what could be the cause?
Am on LeeDrOiDs ROM.
Click to expand...
Click to collapse
Try to rename your DCIM folder on your sdcard to something else... there might be some weird or corrupt image there (don't ask me why that has anything to do with igo though)
barty22 said:
Try to rename your DCIM folder on your sdcard to something else... there might be some weird or corrupt image there (don't ask me why that has anything to do with igo though)
Click to expand...
Click to collapse
This was the problem, After renaming the DCIM folder, everything is working just fine. Strange...
Does anyone else find this extremely heavy? We have the best phone on the market (graphics-wise) and the bloody interface stutters. Igo is obviously obsolete.
Ambious said:
Does anyone else find this extremely heavy? We have the best phone on the market (graphics-wise) and the bloody interface stutters. Igo is obviously obsolete.
Click to expand...
Click to collapse
You're kinda right, but it's the best navigation software for android hands down...
I think the problem is more in the navigation software than in the htc one x. Sygic is also not smooth at all on the htc one x. That's also the reason why I would love to see tomtom for android, but even though they promised it for this summer, I still haven't seen it.
I'm still having trouble configuring it, I tried a lot of multimode.ini / sys.txt modifications. I either get a 1280x720 not supported error, or it closes itself after a few seconds (renaming DCIM does nothing). I'm on stock ROM, not rooted, so I can only edit multimode.ini inside the data.zip archive. The .apk is supposedly made for 1280x720, but maybe I should use another one?
Any help would be appreciated. Thanks!
darthmelk said:
I'm still having trouble configuring it, I tried a lot of multimode.ini / sys.txt modifications. I either get a 1280x720 not supported error, or it closes itself after a few seconds (renaming DCIM does nothing). I'm on stock ROM, not rooted, so I can only edit multimode.ini inside the data.zip archive. The .apk is supposedly made for 1280x720, but maybe I should use another one?
Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
Have you rooted your phone? How did you manage to access the data folder on the phone?
Just curious.
Rgds.
Pushu.X
Sent from my HTC One X
pendragon1 said:
I think the problem is more in the navigation software than in the htc one x. Sygic is also not smooth at all on the htc one x. That's also the reason why I would love to see tomtom for android, but even though they promised it for this summer, I still haven't seen it.
Click to expand...
Click to collapse
Still, Waze works great and so does Google Maps, and the latter uses bloody 3D Satellite imaging.
The capability exists, it's just that most big-name navigation software (Igo, Sygic, etc) haven't really rebuilt their core engines from the bottoms up in ages, and rely on decade-old technologies.
Iceberger said:
This was the problem, After renaming the DCIM folder, everything is working just fine. Strange...
Click to expand...
Click to collapse
Do you have old pictures from another phone in DCIM folder? I had old photos from my old phone, until I moved them then iGO worked.
Apparently, photos with Geographic data will appear in the iGO map as POI, so that might be the problem.
darthmelk said:
I'm still having trouble configuring it, I tried a lot of multimode.ini / sys.txt modifications. I either get a 1280x720 not supported error, or it closes itself after a few seconds (renaming DCIM does nothing). I'm on stock ROM, not rooted, so I can only edit multimode.ini inside the data.zip archive. The .apk is supposedly made for 1280x720, but maybe I should use another one?
Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
[FIX] IGO Primo FULL SCREEN on HTC ONE X
if you want igo primo 2.0 on your htc one x just pm me and i'll be happy to help you.
// this because i can't share here files that work well ....
SbTro said:
if you want igo primo 2.0 on your htc one x just pm me and i'll be happy to help you.
// this because i can't share here files that work well ....
Click to expand...
Click to collapse
can you send me the link for primo 2.0
[email protected]
macavita said:
can you send me the link for primo 2.0
[email protected]
Click to expand...
Click to collapse
dude, and everybody, don't ask for pirated software on xda...
works
SbTro said:
if you want igo primo 2.0 on your htc one x just pm me and i'll be happy to help you.
// this because i can't share here files that work well ....
Click to expand...
Click to collapse
Works great.
tried it on a non rooted HOX
SbTro said:
if you want igo primo 2.0 on your htc one x just pm me and i'll be happy to help you.
// this because i can't share here files that work well ....
Click to expand...
Click to collapse
macavita said:
can you send me the link for primo 2.0
[email protected]
Click to expand...
Click to collapse
Any more talk of warez and bans might be handed out.
omar302 said:
Do you have old pictures from another phone in DCIM folder? I had old photos from my old phone, until I moved them then iGO worked.
Apparently, photos with Geographic data will appear in the iGO map as POI, so that might be the problem.
[FIX] IGO Primo FULL SCREEN on HTC ONE X
Click to expand...
Click to collapse
Works great. Thank you
Hi. I have a galaxy s with JB and i installed primo 2. It works ok exept the voice. can someone help me?
Related
Hey all,
Can somebody confirm that they have had the Uni working with the AKU_3.2 VGA files in the ftp site and jwright's 3.2 ROM?
I've been running the i-mate default ROM on VGA for almost a year now and decided to switch over to the new 3.2 ROM a few days ago. I don't use ozVGA but use the registry hack straight up with the VGA files and VGA system apps.
But for some reason, I can't get all my icons displaying. I've run sdkcerts countless times, hit the power button waiting for 5 seconds before soft resetting, done multiple reboots changing up the order of sdkcerts and vga file copying... I just can't seem to get it to display all the icons correctly.
I know that I'm missing my volume and my cel reception indicator on the top bar at the very least. I CAN see my wifi icons, clock and magic button icons. On another post I found somebody whose screenshot matched mine and the suggestion was to install the AKU_3.2 VGA files again. I've done that alot.
Any ideas would be appreciated. The Uni is significantly better at VGA.
Thanks.
Hmmmm, something strange is definitely going on... I've installed the original ozVGA cab now and even that has not worked. Same problem, it's not loading the top bar icons.... just like if I had not installed those 96dpi resource files into the Windows directory.
Can anybody confirm or deny that ozVGA works with the AKU 3.2 rom?
And mvrTrueVGA is the winner. Why it seemed to work and the other didn't is beyond me...
So I've compared all the files that mvrTrueVGA installs to the VGA files that are supplied in the AKU_2 zip. Essentially, they are all different (which honestly doesn't say much) but there are some interesting additions.
There are new files.
mismde.96.dll
trares0407.96.dll
Plus two interesting things. First off, I was using Total commander to search for all files that were *.96.*
It found two other files which had some interesting properties...
rires.96.dll -- this file I can see on my pocket pc but can't see it through activesync explorer
shellresapps.96.dll -- this file I can't copy from the PPC to look at it. Activesync complains that it cannot convert it.
Just some interesting info in my investigations.
Hi,
I wanted to try out VGA myself. Would it be too much to ask for a step by step instruction list for "beginers"? Attached files would also make it wonderful.
Thanks very much.
Me too wanna try vga with AKU 3.2 if it's totally safe .
www.jaml.com/MvRTrueVGA/
seems safe to me.
Been using it for a while.this is literally just a cab install, it even puts a toggle link in start>programs
pretty idiot-proof, Even I managed that one....
www.jaml.com/MvRTrueVGA/
seems safe to me.
Been using it for a while.this is literally just a cab install, it even puts a toggle link in start>programs
pretty idiot-proof, Even I managed that one....
there's also
http://www.aximsite.com/boards/showthread.php?t=136251&page=2&highlight=A12+OZVGA
as an alternative
fards said:
www.jaml.com/MvRTrueVGA/
seems safe to me.
Been using it for a while.this is literally just a cab install, it even puts a toggle link in start>programs
pretty idiot-proof, Even I managed that one....
there's also
http://www.aximsite.com/boards/showthread.php?t=136251&page=2&highlight=A12+OZVGA
as an alternative
Click to expand...
Click to collapse
Hey thanks.
The Power Settings and the Phone Applications are all mangle up though.
Backgrounds work through Pictures and Video.
cktlcmd said:
Hey thanks.
The Power Settings and the Phone Applications are all mangle up though.
Click to expand...
Click to collapse
You need xda-devs own VJ's vjBigPhone for phone issue...
http://forum.xda-developers.com/showthread.php?t=249642
Download from
http://www.vijay555.com/?Releases:VJBigPhone
Along with this post
http://forum.xda-developers.com/showpost.php?p=844841&postcount=48
Unfortunately I can't find the .cab files to save entering the registry keys manually.. The link on Vjs post are missing..
How often do you really need the Power screen?
Can nebody b nice enough to post their screenshots as b4 trying this i would like to see this already working fine on uni. ?
fards said:
You need xda-devs own VJ's vjBigPhone for phone issue...
http://forum.xda-developers.com/showthread.php?t=249642
Download from
http://www.vijay555.com/?Releases:VJBigPhone
Along with this post
http://forum.xda-developers.com/showpost.php?p=844841&postcount=48
Unfortunately I can't find the .cab files to save entering the registry keys manually.. The link on Vjs post are missing..
How often do you really need the Power screen?
Click to expand...
Click to collapse
Thanks for the tip. Yes, VJ's Phone app works like a charm. What is the purpose of the other link that you gave us with the registry changes?
It would be nice though for the power settings to be seen as normal as possible.
niketkumar said:
Can nebody b nice enough to post their screenshots as b4 trying this i would like to see this already working fine on uni. ?
Click to expand...
Click to collapse
I would post a screen shot for you, but my computer keeps crashing. I have to sort things out.
For all of your complaining about the messed up power and backlight exe's, check out this set of posts.
http://forum.xda-developers.com/showthread.php?t=250640
WARNING: Don't overwrite camera.exe, wlanmgr, or wmodem if you are using the AKU 3.2 ROM. It already has updated versions of these apps. I am only using the power, backlight and microphone mui's.
And please, please read the messages in the post on instructions of how to install them. It's right there in the first post so you don't have to read too far
Dan Feeny said:
For all of your complaining about the messed up power and backlight exe's, check out this set of posts.
http://forum.xda-developers.com/showthread.php?t=250640
WARNING: Don't overwrite camera.exe, wlanmgr, or wmodem if you are using the AKU 3.2 ROM. It already has updated versions of these apps. I am only using the power, backlight and microphone mui's.
And please, please read the messages in the post on instructions of how to install them. It's right there in the first post so you don't have to read too far
Click to expand...
Click to collapse
Thanks very much. I did not even notice those. Keep the suggestions coming. VGA seems better now even though it is still small.
I copied the files: power, backlight, and microphone mui's to my SD card ran them and got a nice looking files without distortion, I copied the files as suggested to the /Windows folder and did a soft reset. But if I access the power, backlight, and microphone through the Settings Tab, I still get the old distorted image. Is this the way it should be? Am I doing something wrong?
cktlcmd said:
Thanks for the tip. Yes, VJ's Phone app works like a charm. What is the purpose of the other link that you gave us with the registry changes?
It would be nice though for the power settings to be seen as normal as possible.
Click to expand...
Click to collapse
The registry links is to change the font size on the phone buttons.
cktlcmd said:
I would post a screen shot for you, but my computer keeps crashing. I have to sort things out.
Click to expand...
Click to collapse
No probs , I will wait.
cktlcmd said:
Thanks very much. I did not even notice those. Keep the suggestions coming. VGA seems better now even though it is still small.
I copied the files: power, backlight, and microphone mui's to my SD card ran them and got a nice looking files without distortion, I copied the files as suggested to the /Windows folder and did a soft reset. But if I access the power, backlight, and microphone through the Settings Tab, I still get the old distorted image. Is this the way it should be? Am I doing something wrong?
Click to expand...
Click to collapse
Did you run the .0409.mui exe first? Then copy to Windows? Then remove the trailing .exe from the .0409.exe files? It worked perfectly for me.
Dan Feeny said:
Did you run the .0409.mui exe first? Then copy to Windows? Then remove the trailing .exe from the .0409.exe files? It worked perfectly for me.
Click to expand...
Click to collapse
yep rename the files, get rid of the .exe on the end of the 409.mui one
Do images rotate on turning the device without opening the keyboard? like on HD or Diamond? Because in my TP2, images do not rotate on turning the device as it is supposed to due to g-sensor .... isn't it? Does it have to be activated somehow or is it not possible in TP2 ... which will be strange.
dr_s said:
Do images rotate on turning the device without opening the keyboard? like on HD or Diamond? Because in my TP2, images do not rotate on turning the device as it is supposed to due to g-sensor .... isn't it? Does it have to be activated somehow or is it not possible in TP2 ... which will be strange.
Click to expand...
Click to collapse
by default rotation with gyro does not work on Rhodium.
You can use gyrator2 if you wish to enable this functionality.
Cheers,
Beasty
I have the same problem. Screen rotates in opera, but not in Album.
same here, and gyrator is not the perfectly program for this... its slow, and it isn't integrated with WM after install. its just a stand-alone app what runs as the same way as other programs (you can also close it by taskmanager).
Also taksmanager doenst close programs by clicking [X] ?? (even when i select it)...
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Well found! Very Handy
Thanks
Joseng said:
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Click to expand...
Click to collapse
I understand this works great. few questions:
Doesn't it slow the device?
What programs do you suggest to be rotating without the screen sliding out and what programs do you think shouldn't flip to landscape because it gets annoying?
Joseng said:
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Click to expand...
Click to collapse
thanks. great find. but same question as above.
Why HTC has not made it default for the album?
dr_s said:
thanks. great find. but same question as above.
Why HTC has not made it default for the album?
Click to expand...
Click to collapse
The same question could be applied to many things HTC have done with the Rom on the Rhodium.
At the end of the day, do what we do best here, add the functionality that you want, then fix any problems that occur afterwards.
I haven't noticed any adverse affects using gyrator, as yet anyway.
Cheers,
Beasty
does anybody by any chance have the window class of sygic mobile drive (previously mcguider)??
Joseng said:
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Click to expand...
Click to collapse
how do you add this file to the reg for us newbs please
thanks for any help
Doesn't it automatically display the picture at the maximum size? Meaning if it is a landscape picture it displays it in landscape and if it is a portrait picture it displays it in portrait? I actually prefer the way it is done in the new album which I am running on my FUZE.
combat goofwing said:
how do you add this file to the reg for us newbs please
thanks for any help
Click to expand...
Click to collapse
Guide for newbies here
http://htctouchpro2.wordpress.com/2009/06/21/htc-touch-pro2-hacks-–-part-2-–-g-sensor-everything/
thanks thats why i love this site, you get what you think is a great phone and they just help you make it even better
and to think i thought my viewty was the muts nuts
Could someone help me out with the TomTom reg key? I get the modulename bit right, just point it to tomtomnavigator.exe. Don't really understand the whitelist key. What should the value be for Tomtom?
Thanks.
EDIT: Just found it in the topaz section. For anyone wlse who needs to know, it is "MunichWinClass" for some reason. Thanks to infoman68 for that.
Awsome thread I downloaded and installed the gyrator2, but I cannot figure out what plugin/program to grab from microsoft to install that dotnet 3.5 on the phone to get gyrator to work. can someone please point me to the correct file?
thanks.
to anyone else wishing to add an app to HTCs GSensor list in the reg and not knowing the window title or class...
download Gyrator2, install and run. Add a new event. Choose learn. Take stylus out. Make active the window you need the name of. Insert stylus. There! Gyrator has just told ya what ya need to know... Uninstall gyrator and add what it told ya to the reg...
nice post dude...
i am still trying to get the gyrator to work on my pro2.
did you also have issues with the dotnet thing?
Hello, brilliant suggestion from bigjezza. Myself I'm trying to get Microsoft Reader to react to my phone's gyrations. However when I bring up Gyrator 2 the MS Reader app is not listed. Actually it never came up in my program-list in the first place even though it did install and runs perfectly. Had to stick a shortcut in the Windows/Start-menu.
Any suggestion on how to get MsReader onto Garator's list, or does anyone know what the relevant data is for MsReader just like that?
Many thanks/McHan
Joseng said:
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Click to expand...
Click to collapse
I did install the .reg, then looked my self the new strings in the registry and everything looked OK, but the images on Album still do not respond to device rotation... Any other solution? Or it is need to activate or deactivate something else?
regards,
Tyrone
http://forum.xda-developers.com/showthread.php?t=825875
Could this be modified to make Igo use the full screen on the Galaxy?
No, you can't unfotunately. On winmo devices you had to modify the data.zip or data.gro, but it doesn't work on Android version. But there is a way to do it. Nav' N Go released a new data.gro that solves the problem. I've tryed it and worked great on mine. Unfortunatelly it's illegal to distribute it but a little bit of googleing or gpsunderground.com could help you.
Hope I was clear enough, and helpfull enough.
keno_ro said:
http://forum.xda-developers.com/showthread.php?t=825875
Could this be modified to make Igo use the full screen on the Galaxy?
Click to expand...
Click to collapse
If you want iGO on Galaxy S send me a pm, and ai give you download links....
I also have some links for Igo but I just tried the new Sygic Aura and is awesome!
Hi guys,
For those of you who still use iGO8 and haven't changed to Primo, I thought to share how the iGO8(480x272) looks on the HD Mini.
I've tested a few changes in the sys file until I've got iGO8 to look decent on the Mini considering the HVGA resolution and the fact that I didn't find a proper branding/data.zip out there with 320x480.
I thought 480x272 is quite close to 320x480 in landscape, the difference is only 48 pixels...
Have a look the the attached picture. You will lose 48 pixels on the bottom of the screen. If you still like it this is how you do it.
If you managed to start iGO8 go to your sys file and modify:
[rawdisplay]
class="rlandscape"
screen_x=480
screen_y=272
vga =0
highres=0
strech=1
If you didn't manage to start it, keep trying. These could be some reasons:
1. Make sure you installed it (in 2257 folder run autorun.exe)
2. Make sure you are editing the right "sys.txt" (it can be only one )
3. Make sure you have the folder ui_igo8/480_272 in you branding.zip and data.zip
If anyone knows better solutions please share.
Check this thread with other working skins with full view.
http://forum.xda-developers.com/showthread.php?t=946704
Wrong skins ...
MobileMini said:
Check this thread with other working skins with full view.
http://forum.xda-developers.com/showthread.php?t=946704
Click to expand...
Click to collapse
Sorry but these ones are for Igo Primo not for Igo 8.3...
But why "You will lose 48 pixels on the bottom of the screen."? There's a Dimkavert skin for hd mini and you won't lose any pixel. You'll see the app filling all the screeen.
Try to search on Google. If you don't find it I can send you mine which is working perfectly.
Cheers.
@otsart
I've tested the Dimka skins, which I already had installed on my IGO , but still they don't go full screen. I had a look on his website and his skins are not for HVGA (320x480/480x320). They are working on your mini because you probably have the 480x320 in your branding/data.zip (which I am not able to find anymore) and dimka's skins get stretched somehow. Maybe post the [rawdisplay] section of your sys file so that we'll see how come they work on HVGA.
Many thanks!
Many thanks for the files It Works perfectly in full-screen now!
a torrent file please!
MOD EDIT: You cant ask for warez on XDA
georgekzan said:
Many thanks for the files It Works perfectly in full-screen now!
Click to expand...
Click to collapse
Hi
i am searching the Data.zip / branding.zip for igo 8.3.xxx for resolution 320x480. (windowsCE)
Can someone help me pls
I know its a very old thread
ty
iGo MyWay navigation relies on maps and other content located on sdcard in order to operate. I currently have DHD and I was wondering if iGo will work if I switch to One X. Can anyone confirm that it works with internal memory and it doesn't seek for sd card hardware ?
You'll just need to make sure the secondary root paths in your sys.txt point correctly to the location for the content, etc Haven't got my One X yet (Tuesday - damn Easter bank holidays!) but iGo will be one of the first things I put on it once it's rooted. Can anyone who's got one already and got it rooted have a look and see what the 'name' for the 'sdcard' is (look using TC or Root Explorer).
Dunc001 said:
You'll just need to make sure the secondary root paths in your sys.txt point correctly to the location for the content, etc Haven't got my One X yet (Tuesday - damn Easter bank holidays!) but iGo will be one of the first things I put on it once it's rooted. Can anyone who's got one already and got it rooted have a look and see what the 'name' for the 'sdcard' is (look using TC or Root Explorer).
Click to expand...
Click to collapse
thanks but sys.txt is not visible anywhere. Do you mean I should edit the apk?
The internal storage is mounted as virtual SD..
No issues i should think
vallandil said:
The internal storage is mounted as virtual SD..
No issues i should think
Click to expand...
Click to collapse
thanks, but you haven't tested it, right? could anyone who has tried it, verify that it works?
Yes iGo works, but it's not worth the hassle.
iGo is not skinned to the high resolution and even the xda-mod for qvga 940x560 only uses a minor area of the screen. It is not programmed to adapt to other screen sizes but uses skins that are custom made for certain resolutions.
So it runs but you have a nasty black border right (180pix) and bottom (160 pix).
Which is extremely sad because iGo is the best Nav-Software on Android.
jotha said:
Yes iGo works, but it's not worth the hassle.
iGo is not skinned to the high resolution and even the xda-mod for qvga 940x560 only uses a minor area of the screen. It is not programmed to adapt to other screen sizes but uses skins that are custom made for certain resolutions.
So it runs but you have a nasty black border right (180pix) and bottom (160 pix).
Which is extremely sad because iGo is the best Nav-Software on Android.
Click to expand...
Click to collapse
Well, that's interesting info but unfortunately I have no other choice. iGo is the only navigation which supports maps in Cyprus.
Got the One X myself...
iGo does work flawlessly, but it is very annoying to see those black borders!
I hope some skinner will make a 1280x720 skin really soon.
Wished I could do it myself, but I do not have the resources to do that (eg. how to make the .gro file, how to set correct screen locations, etc.)
iGO and HTC One X
Hi,
Until yesterday i use iGO on Sensation and works great. Now i have HTC One X and waiting for skin. If enybody have skin, please put the link here on on private message. Also, if anybody needs maps for iGo (133 countries), leave message here and will send link for download. Thanks to everybody.
andreasy said:
iGo MyWay navigation relies on maps and other content located on sdcard in order to operate.
Click to expand...
Click to collapse
I've got exactly this problem My HTC Desire have Navigon and IGO but when I am trying now install them to my new One X - both ask for data located on SD card.
I understand that there is a virtuall SD card on X but none of my navigators can handle it How have you guys routed to the right place?
Besides, is there are any other navigators that handles HD that One X has?
Hello, I'm using sygic aura. No problems installing, downloading maps (over wi-fi) or running. Dunno if it is running HD but if not scaled up nicely.
Sent from my HTC One X using XDA
Bright.Light said:
Got the One X myself...
iGo does work flawlessly, but it is very annoying to see those black borders!
I hope some skinner will make a 1280x720 skin really soon.
Wished I could do it myself, but I do not have the resources to do that (eg. how to make the .gro file, how to set correct screen locations, etc.)
Click to expand...
Click to collapse
Could you post Your sys.txt. I can't force Igo to work on my OneX.
I got the next error
some can upload good works version
solved =)
Used http://depositfiles.com/files/tsmr7bmga apk
[SKIN] Android iGO My Way Reborn Skin v1.5.5 EUR+ TTS Multi-Res
oftiklaus said:
Hello, I'm using sygic aura. No problems installing, downloading maps (over wi-fi) or running. Dunno if it is running HD but if not scaled up nicely.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
Does it have maps/POIs for Cyprus? or can it use the ones from iGo?
name.vic said:
I got the next error
http://radikal.ru/F/s003.radikal.ru/i204/1205/d3/31f0478d89e0.png.html
some can upload good works version
solved =)
Used http://depositfiles.com/files/tsmr7bmga apk
Click to expand...
Click to collapse
That's because you are trying to replace the files outlined in the OP instructions. Just install the stretched version apk of iGo but that will only give you 1280x720, not 800.
andreasy said:
That's because you are trying to replace the files outlined in the OP instructions. Just install the stretched version apk of iGo but that will only give you 1280x720, not 800.
Click to expand...
Click to collapse
The One X's display is 1280x720.
It seems that the stretched version is optimized for the Galaxy note which comes at 1280x800. So scaling that to 720 wide will give length of ~1152.
Igo for Android maximum resolution is 800x600...or around 500000 pixels,it is impossible to expand it to ammount of pixels on One x,I used skin for Sensation(around 860x540),but it is too small for One x screen,like poststamp.So,I switched to Navigon and Ndrive.Mariupol used to make best skins for Android,but even He is blocked by the old structure of igo8(because,Android version is Amigo,which is older than Primo,which is used for iOS version).
Too sad. Unfortunately it's the only one with Cyprus maps. Does anyone know any other app that can read the same maps as iGo (.fbl)? it's my only single choice.
ujkadusko said:
Igo for Android maximum resolution is 800x600...or around 500000 pixels,it is impossible to expand it to ammount of pixels on One x,I used skin for Sensation(around 860x540),but it is too small for One x screen,like poststamp.So,I switched to Navigon and Ndrive.Mariupol used to make best skins for Android,but even He is blocked by the old structure of igo8(because,Android version is Amigo,which is older than Primo,which is used for iOS version).
Click to expand...
Click to collapse
Android Honeycomb intoduced the ability to "Stretch" apps. It is like Zooming in.
The issue with the One X, is that the stretched iGO version available, made by member bobroberts2, is made to be stretched properly on a scale like 1280x800 (Galaxy Note). So, when it is scaled the One X's 720 wode screen, the length will come short of 1280 (~1152).