iGo MyWay navigation relies on maps and other content located on sdcard in order to operate. I currently have DHD and I was wondering if iGo will work if I switch to One X. Can anyone confirm that it works with internal memory and it doesn't seek for sd card hardware ?
You'll just need to make sure the secondary root paths in your sys.txt point correctly to the location for the content, etc Haven't got my One X yet (Tuesday - damn Easter bank holidays!) but iGo will be one of the first things I put on it once it's rooted. Can anyone who's got one already and got it rooted have a look and see what the 'name' for the 'sdcard' is (look using TC or Root Explorer).
Dunc001 said:
You'll just need to make sure the secondary root paths in your sys.txt point correctly to the location for the content, etc Haven't got my One X yet (Tuesday - damn Easter bank holidays!) but iGo will be one of the first things I put on it once it's rooted. Can anyone who's got one already and got it rooted have a look and see what the 'name' for the 'sdcard' is (look using TC or Root Explorer).
Click to expand...
Click to collapse
thanks but sys.txt is not visible anywhere. Do you mean I should edit the apk?
The internal storage is mounted as virtual SD..
No issues i should think
vallandil said:
The internal storage is mounted as virtual SD..
No issues i should think
Click to expand...
Click to collapse
thanks, but you haven't tested it, right? could anyone who has tried it, verify that it works?
Yes iGo works, but it's not worth the hassle.
iGo is not skinned to the high resolution and even the xda-mod for qvga 940x560 only uses a minor area of the screen. It is not programmed to adapt to other screen sizes but uses skins that are custom made for certain resolutions.
So it runs but you have a nasty black border right (180pix) and bottom (160 pix).
Which is extremely sad because iGo is the best Nav-Software on Android.
jotha said:
Yes iGo works, but it's not worth the hassle.
iGo is not skinned to the high resolution and even the xda-mod for qvga 940x560 only uses a minor area of the screen. It is not programmed to adapt to other screen sizes but uses skins that are custom made for certain resolutions.
So it runs but you have a nasty black border right (180pix) and bottom (160 pix).
Which is extremely sad because iGo is the best Nav-Software on Android.
Click to expand...
Click to collapse
Well, that's interesting info but unfortunately I have no other choice. iGo is the only navigation which supports maps in Cyprus.
Got the One X myself...
iGo does work flawlessly, but it is very annoying to see those black borders!
I hope some skinner will make a 1280x720 skin really soon.
Wished I could do it myself, but I do not have the resources to do that (eg. how to make the .gro file, how to set correct screen locations, etc.)
iGO and HTC One X
Hi,
Until yesterday i use iGO on Sensation and works great. Now i have HTC One X and waiting for skin. If enybody have skin, please put the link here on on private message. Also, if anybody needs maps for iGo (133 countries), leave message here and will send link for download. Thanks to everybody.
andreasy said:
iGo MyWay navigation relies on maps and other content located on sdcard in order to operate.
Click to expand...
Click to collapse
I've got exactly this problem My HTC Desire have Navigon and IGO but when I am trying now install them to my new One X - both ask for data located on SD card.
I understand that there is a virtuall SD card on X but none of my navigators can handle it How have you guys routed to the right place?
Besides, is there are any other navigators that handles HD that One X has?
Hello, I'm using sygic aura. No problems installing, downloading maps (over wi-fi) or running. Dunno if it is running HD but if not scaled up nicely.
Sent from my HTC One X using XDA
Bright.Light said:
Got the One X myself...
iGo does work flawlessly, but it is very annoying to see those black borders!
I hope some skinner will make a 1280x720 skin really soon.
Wished I could do it myself, but I do not have the resources to do that (eg. how to make the .gro file, how to set correct screen locations, etc.)
Click to expand...
Click to collapse
Could you post Your sys.txt. I can't force Igo to work on my OneX.
I got the next error
some can upload good works version
solved =)
Used http://depositfiles.com/files/tsmr7bmga apk
[SKIN] Android iGO My Way Reborn Skin v1.5.5 EUR+ TTS Multi-Res
oftiklaus said:
Hello, I'm using sygic aura. No problems installing, downloading maps (over wi-fi) or running. Dunno if it is running HD but if not scaled up nicely.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
Does it have maps/POIs for Cyprus? or can it use the ones from iGo?
name.vic said:
I got the next error
http://radikal.ru/F/s003.radikal.ru/i204/1205/d3/31f0478d89e0.png.html
some can upload good works version
solved =)
Used http://depositfiles.com/files/tsmr7bmga apk
Click to expand...
Click to collapse
That's because you are trying to replace the files outlined in the OP instructions. Just install the stretched version apk of iGo but that will only give you 1280x720, not 800.
andreasy said:
That's because you are trying to replace the files outlined in the OP instructions. Just install the stretched version apk of iGo but that will only give you 1280x720, not 800.
Click to expand...
Click to collapse
The One X's display is 1280x720.
It seems that the stretched version is optimized for the Galaxy note which comes at 1280x800. So scaling that to 720 wide will give length of ~1152.
Igo for Android maximum resolution is 800x600...or around 500000 pixels,it is impossible to expand it to ammount of pixels on One x,I used skin for Sensation(around 860x540),but it is too small for One x screen,like poststamp.So,I switched to Navigon and Ndrive.Mariupol used to make best skins for Android,but even He is blocked by the old structure of igo8(because,Android version is Amigo,which is older than Primo,which is used for iOS version).
Too sad. Unfortunately it's the only one with Cyprus maps. Does anyone know any other app that can read the same maps as iGo (.fbl)? it's my only single choice.
ujkadusko said:
Igo for Android maximum resolution is 800x600...or around 500000 pixels,it is impossible to expand it to ammount of pixels on One x,I used skin for Sensation(around 860x540),but it is too small for One x screen,like poststamp.So,I switched to Navigon and Ndrive.Mariupol used to make best skins for Android,but even He is blocked by the old structure of igo8(because,Android version is Amigo,which is older than Primo,which is used for iOS version).
Click to expand...
Click to collapse
Android Honeycomb intoduced the ability to "Stretch" apps. It is like Zooming in.
The issue with the One X, is that the stretched iGO version available, made by member bobroberts2, is made to be stretched properly on a scale like 1280x800 (Galaxy Note). So, when it is scaled the One X's 720 wode screen, the length will come short of 1280 (~1152).
Related
Mobile Navigator 7 has just been released for PPC.
http://www.navigon.com/site/int/en/shop/consumer/pda/1246
It has:
# Intuitive user interface
# Precise audio instructions
# Reality View Pro (only available in landscape format)
# Text to speech - the relevant road names are announced by the system in route descriptions and navigation instructions (available in the following countries: Austria, France, UK, Germany, Ireland, Italy, Netherlands, Portugal, Spain, Sweden, Liechtenstein, Belgium, Luxemburg, Switzerland)
# Lane Assistant Pro
# Quickest, shortest and ideal route
# Real Signpost Display
# Speed Assistant
# "Go home" function
# 2D/3D view
# Route planning with diverse reference points
# Door-to-door navigation
# Logbook
# Free TMC reception (not available in all countries)
# POIs on the route
# Speed camea information (speed camera information is not permitted in all countries. Please check the legal situation in the country you are travelling in)
# Extended free functions*
# Weather service - 3-day weather forecasts
# HRS (Hotel Reservation System) - find hotels
I have the Navigon 2100max PNA and prefer Navigon to TomTom and IGo etc. Very pleased with it so the PDA version should be just as good.
Here are the xml modifications to support HD res. Have not tried it yet as I don't have the phone yet.
Im hoping this works, 'cause navigator 6 hangs on my HD as well as on my girlfriends Omnia. Haven't found the reason yet, but I think it's a resolution thing...
hangin nav
Maarten_0031 said:
Im hoping this works, 'cause navigator 6 hangs on my HD as well as on my girlfriends Omnia. Haven't found the reason yet, but I think it's a resolution thing...
Click to expand...
Click to collapse
It shouldnt hang. I have TT nav 7 VGA works like a dream and is gorgeous on the HD.
Hello
I confirm it's works
Thanks
bouya_k said:
Hello
I confirm it's works
Thanks
Click to expand...
Click to collapse
Work it with the intern GPS? I read that Navigon 7 have problems with this.
bouya_k said:
Hello
I confirm it's works
Thanks
Click to expand...
Click to collapse
You mean this new Navigon 7 PDA version I posted in the link works on the HD?
Did you use the attached xmls?
Is it full screen and hi res?
Thanks!
Their website doesn't show the Touch HD as a compatible device:
http://www.navigon.com/site/int/en/service_support/compatibility
Never used navigon, but I like what I see!
Yes but it supports other windows mobile devices and you know what, they are nearly all the same at the end of the day. As I said, I have the Navigon 2100max. Bought it half price for £99 from Halfords. It uses MN7 software which is fast. Love it.
Here is a trailer for Mobile Navigator 7 for those who have never used it to see what its like. Its very popular in Europe but less so in UK as TomTom seem to be the leaders.
http://uk.youtube.com/watch?v=f9EKPImocZ4
It has literally just been released. Launch date is tomorrow - 17th November.
tboy2000 said:
Here is a trailer for Mobile Navigator 7 for those who have never used it to see what its like. Its very popular in Europe but less so in UK as TomTom seem to be the leaders.
http://uk.youtube.com/watch?v=f9EKPImocZ4
It has literally just been released. Launch date is tomorrow - 17th November.
Click to expand...
Click to collapse
Looks very interesting. It has speed warning? Is that by comparing your actual speed against the legal limit of that particular stretch of road or merely against a preset speed?
Do they have maps for Australia?
tboy2000 said:
You mean this new Navigon 7 PDA version I posted in the link works on the HD?
Did you use the attached xmls?
Is it full screen and hi res?
Thanks!
Click to expand...
Click to collapse
Hello
I tried without your xml and my navigon 7 hang at startup... after I applied your xml no problem.. full screen
thanks for them
I would like to buy Nav 7 but have no idea how to install it on m HD. What should I do with the xml files?
boba23 said:
How do you guys judge the TTS quality of Navigon 7? I am also considering buying it, mainly because I hope that I get a good, and working TTS system with it. Those "hacked" TTS files that fly around for iGO8 are well .... crap in my eyes.
boba
Click to expand...
Click to collapse
Well, same with me! Is there anything not nice with the MN7 on the HD?
tboy2000 said:
...
# Free TMC reception (not available in all countries)
...
Click to expand...
Click to collapse
Hi,
how does TMC reception exactly work - will it use the implemented radio module? I mean, if I buy MN7 and install it on my HD, will I automatically be able to use TMC (with headset antenna plugged in, I mean)? Or do I need additional hardware? Mobile navigation does not make sense to me without TMC (in Germany ...), and I wonder if I really can throw away my PNA and use the Touch HD instead.
Eriol
A few answers to above questions.
I am happy with the UK Text to speech. Announces roads very well.
Not sure about if TMC uses radio built into phone as I dont have HD yet but I presume it does. I also presume you would need to plug in a usb lead or headphones to act as the antenna just like in the PNA version.
According to Navigon, TMC reception is available at no charge in the following countries: A, B, CH, CZ, D, DK, E, I, N, NL, S.
As for installing it, copy the folders in the download to the root of your SD card. Then go to folder 2577 and hit the install05 cab. Then copy the xml files in the 1st post and overwrite them with the relevant ones on the sd card.
tboy2000 said:
As for installing it, copy the folders in the download to the root of your SD card. Then go to folder 2577 and hit the install05 cab. Then copy the xml files in the 1st post and overwrite them with the relevant ones on the sd card.
Click to expand...
Click to collapse
Is the solution you present here using the full 800x480 pixel screen size or is it just stretching 640x480 to 800x480 (as proposed in some German navigation forums some weeks ago)?
I wonder why Navigon has not yet changed its MN7 to the realities and offers a true 800x480 product ...
As for the TMC: I read in different forums that TMC would not work, but none of the posters was able to test this. Another option would be to download traffic data via internet; TomTom is able to do this now with its latest PDA versions.
Eriol
MN 6.2.5...
Eriol said:
Is the solution you present here using the full 800x480 pixel screen size or is it just stretching 640x480 to 800x480 (as proposed in some German navigation forums some weeks ago)?
Click to expand...
Click to collapse
Actually I don't know how it works with MN7, however I changed just the "BinaryConfig.xml" into the MN 6.2.5 version... and I found the stretched result pretty ugly !!
So I came back with the "normal" resolution of 640x480... and it works well, even if a part of the screen isn't used... ;-)
Read post 11. He has tried it and says it is fullscreen. Maybe he can tell us if it looks good or not.
MN 6.2.5
tboy2000 said:
Read post 11. He has tried it and says it is fullscreen. Maybe he can tell us if it looks good or not.
Click to expand...
Click to collapse
That's exactly what I'm trying to explain... ;-)
I did it in "fullscreen" with the version 6.2.5... and the result is awful !! Icons and menus are completely deformed...
That way, I don’t like it at all, however it’s just my point of view... ;-)
Yes but you have said you have used version 6.2.5. This thread is about version 7.0 so MN7 may be different on full screen and improved.
Hi,
it seems like Navigon tried to implement WVGA resulution in their latest version of Mobile Navigator MN 7 v7.3.2 ... however, unsuccessful :-(
To make it work, unzip the attached "BinaryConfig.XML" and replace it on the device in the "\navigon\" directory... other files don't need to be replaced any more.
This fix applies only to v7.3.2!
regards jan
EDIT: I've replaced the first file by 3 others... the first is identical to the original posted here earlier, the others "stretch" mn7 to a mixture between vga and wvga, and to fullscreen wvga. Backgound (in German language can be found here)
to sum that up:
-people who like the version without stretching take the first file,
-people who like higher use of the screen and still want the full functionality (in landscape mode) take the 2nd file,
-people who like full-screen with restrictions to functionality (in landscape mode some software-internal scroll arrows can not be accessed) take the third file
regards jan
Indeed. The 7.3.2 did not launch and I had to soft reset my Touch HD.
Thanks for your files !
Do you know what are the changes brought by 7.3.2, otherwise than the WVGA resolution failed attempt ?
Does not work good.
But good Try.
Cool
Working perfect for me
Thanks a lot
where find 7.3.2 ?
thank you
taz22 said:
where find 7.3.2 ?
thank you
Click to expand...
Click to collapse
All updates (maps, software, ...) are done via Navigon Fresh.
thank you
very much
i m stupid
dodo34 said:
Does not work good.
But good Try.
Click to expand...
Click to collapse
what exactly do you mean?
Probably he means that - at least for 480x800 - not better than what was given at
http://forum.xda-developers.com/showthread.php?t=446487&page=15 post # 148
but anyway thanks for other resolutions.
Hallo,
how did you get the Touch HD running on 7.3.2?
I also run this config, but my Touch HD don`t recognize the internal GPS. What will I have to do that the MobileNavigator will find GPS???
Hello!
I´ve got the problem, when i want to start the MN7.3.2 in landscape mode, the mn7 goes for approx. 5seconds to horizontal mode, but starts in landscape. Then it rotates to landscape, but the mn7 is cut to the left half.
Has anybody an idea?
I use MaryOne ROM from HelloNasty, so it rotates for itself.
raz0r09 said:
Hallo,
how did you get the Touch HD running on 7.3.2?
I also run this config, but my Touch HD don`t recognize the internal GPS. What will I have to do that the MobileNavigator will find GPS???
Click to expand...
Click to collapse
if you haven't changed any gps settings on the hd itself and if you don't use any port splitter like serilot or glopus, it should work with the following manual gps settings in navigon setup:
GPS Type: Internal GPS only
GPS-Port: Com4: ActiveDevice
GPS Baudrate: 4800
TMC: None
at least that works for me...
good luck
regards jan
NoRescue said:
Hello!
I´ve got the problem, when i want to start the MN7.3.2 in landscape mode, the mn7 goes for approx. 5seconds to horizontal mode, but starts in landscape. Then it rotates to landscape, but the mn7 is cut to the left half.
Has anybody an idea?
I use MaryOne ROM from HelloNasty, so it rotates for itself.
Click to expand...
Click to collapse
You have to make sure that the screen is in landscape mode (which means not only hold the device in landscape, but have an open window (i.e. file explorer) which actually is displayed in landscape) BEFORE you start MN7, and it should stay like that all the time. MN7 gets "confused" when you change screen orientation during operation. maybe you should exclude it from your g-sensor app.
hope that helps...
regards jan
Update to MN7.3.2
I Have problems updating to 7.3.2.
Have copied the Software (7.3.1) to the HD in HDD-Mode and installed everything. Then Installed NavigonFresh on my PC and plugd in my HD in HDD-Mode. When I hit Update Navigon-Sofware I get the massage: "Ungültige Gerätedefinition" (=>Invalid Devicedefinition)
What am I doing wrong? Created an Account and everything. Do I Have to buy MN to Update?
MN7
What did I do wrong - Icopied the binaryconfig file as you said but when I launch MN7 still no display. Can you help?
HD switching off
Hi all,
Since I have installed navigon MN7, my HD does not switch off automatically anymore.. That's very bad for the battery. Any idea how to solve this problem?
Thanks !
See http://forum.xda-developers.com/showthread.php?t=446487&page=43 (hope this becomes a link), post #423. The hard reset may not be necessary; I did it because I wanted to clean the device of any unexpected effects which I was afraid would have been created by MN7 using the "wrong" xmls. Sorry I tried both on my PC (the installation program) and on my HTC HD (my trail version) but coud not find a menu option saying which version of MN7 I have!
Thank you hausen, it works perfectly on my Diamond2!
Hi all,
today i've bought a Navigon Mobile 7 for my HTC HD2, installed, updated via Freshstuff and till this morning my NM7 wouldnt start at all...i modified it with the files provided here (.xml) tried with soft and hard reset, uninstalled Copilot Live 8 (thought was a kind of conflict). The manual say:
- use 2 gb sd micro card to install the software..i've used 4 gb and 8gb...maybe is mandatory???
the program start and remain freezed fro few second (without any welcome screen, just the pda freezed...) then i checked in the task manager and i saw was in run using 2.49 mb of resources and i had to stop it few time...
now...any solution about? or i have to be again a bad guy and stop to buy software but just have to keep download cracked software?
Thank you all for the answers,
S. aka Dr. Dobermann...ANGRY...really ANGRY!
thanks
hausen said:
Hi,
it seems like Navigon tried to implement WVGA resulution in their latest version of Mobile Navigator MN 7 v7.3.2 ... however, unsuccessful :-(
To make it work, unzip the attached "BinaryConfig.XML" and replace it on the device in the "\navigon\" directory... other files don't need to be replaced any more.
This fix applies only to v7.3.2!
regards jan
EDIT: I've replaced the first file by 3 others... the first is identical to the original posted here earlier, the others "stretch" mn7 to a mixture between vga and wvga, and to fullscreen wvga. Backgound (in German language can be found here)
to sum that up:
-people who like the version without stretching take the first file,
-people who like higher use of the screen and still want the full functionality (in landscape mode) take the 2nd file,
-people who like full-screen with restrictions to functionality (in landscape mode some software-internal scroll arrows can not be accessed) take the third file
regards jan
Click to expand...
Click to collapse
might actually work
can i have some advice please
on my im led to believe wvga is best resolution and should install wvga apps when possible
i have seen some versions of tomtom available
qvga.7.915.9196.black
qvga.7.915.9196.blue
vga.7.915.9196.black
i have vga.7.915.9196.black installed but i would like to know please what app out of above i should be using . new to this windows mobile stuff and it taking some getting used to after being a symbian user for many years.
oh another point anyone using tomtom know where i should put a folder called art\cars i cant seem to get tomtom to find them . there over 200 icons would that make a differnce.
thank you
vga.7.915.9196.black for the blackstone
lancsuk said:
can i have some advice please
on my im led to believe wvga is best resolution and should install wvga apps when possible
i have seen some versions of tomtom available
qvga.7.915.9196.black
qvga.7.915.9196.blue
vga.7.915.9196.black
i have vga.7.915.9196.black installed but i would like to know please what app out of above i should be using . new to this windows mobile stuff and it taking some getting used to after being a symbian user for many years.
oh another point anyone using tomtom know where i should put a folder called art\cars i cant seem to get tomtom to find them . there over 200 icons would that make a differnce.
thank you
Click to expand...
Click to collapse
I am also using the black vga version. The art folder should be in the main directory of your storage card. (icons should be in the CARS folder: Storage Card\ART\CARS) Hope this helps!
cheers mate . i tried that earlier art\cars and it didnt work but i tried ART\CARS with only two cars in folder and it works fine now .
thanks
i dont know if the upper case made the difference or the fact i took 225 icons out and left only two
lancsuk said:
cheers mate . i tried that earlier art\cars and it didnt work but i tried ART\CARS with only two cars in folder and it works fine now .
thanks
i dont know if the upper case made the difference or the fact i took 225 icons out and left only two
Click to expand...
Click to collapse
I don't think it was the upper case that was your problem because I just changed mine to lower case and it still worked. Maybe you had too many icons and it was taking too long to load.
Hi guys,
For those of you who still use iGO8 and haven't changed to Primo, I thought to share how the iGO8(480x272) looks on the HD Mini.
I've tested a few changes in the sys file until I've got iGO8 to look decent on the Mini considering the HVGA resolution and the fact that I didn't find a proper branding/data.zip out there with 320x480.
I thought 480x272 is quite close to 320x480 in landscape, the difference is only 48 pixels...
Have a look the the attached picture. You will lose 48 pixels on the bottom of the screen. If you still like it this is how you do it.
If you managed to start iGO8 go to your sys file and modify:
[rawdisplay]
class="rlandscape"
screen_x=480
screen_y=272
vga =0
highres=0
strech=1
If you didn't manage to start it, keep trying. These could be some reasons:
1. Make sure you installed it (in 2257 folder run autorun.exe)
2. Make sure you are editing the right "sys.txt" (it can be only one )
3. Make sure you have the folder ui_igo8/480_272 in you branding.zip and data.zip
If anyone knows better solutions please share.
Check this thread with other working skins with full view.
http://forum.xda-developers.com/showthread.php?t=946704
Wrong skins ...
MobileMini said:
Check this thread with other working skins with full view.
http://forum.xda-developers.com/showthread.php?t=946704
Click to expand...
Click to collapse
Sorry but these ones are for Igo Primo not for Igo 8.3...
But why "You will lose 48 pixels on the bottom of the screen."? There's a Dimkavert skin for hd mini and you won't lose any pixel. You'll see the app filling all the screeen.
Try to search on Google. If you don't find it I can send you mine which is working perfectly.
Cheers.
@otsart
I've tested the Dimka skins, which I already had installed on my IGO , but still they don't go full screen. I had a look on his website and his skins are not for HVGA (320x480/480x320). They are working on your mini because you probably have the 480x320 in your branding/data.zip (which I am not able to find anymore) and dimka's skins get stretched somehow. Maybe post the [rawdisplay] section of your sys file so that we'll see how come they work on HVGA.
Many thanks!
Many thanks for the files It Works perfectly in full-screen now!
a torrent file please!
MOD EDIT: You cant ask for warez on XDA
georgekzan said:
Many thanks for the files It Works perfectly in full-screen now!
Click to expand...
Click to collapse
Hi
i am searching the Data.zip / branding.zip for igo 8.3.xxx for resolution 320x480. (windowsCE)
Can someone help me pls
I know its a very old thread
ty
Anybody succeeded in installing this application on One X?
forster said:
Anybody succeeded in installing this application on One X?
Click to expand...
Click to collapse
yeah of course, you need root access, then use Root Explorer (or similar app) to edit the sys.txt located in /data/data/com.navngo.javaclient/
and then you need to have this in the sys.txt, replace the old part with this:
Code:
[rawdisplay]
driver=engine
screen_xy="800_480:1280x670/720x1230"
^^ That will keep your android top bar visible, both in portrait and landscape.
If you would want fullscreen, then use this:
Code:
[rawdisplay]
driver=engine
screen_xy="800_480:1280x720/720x1280:fullscreen"
Good luck!
EDIT: above edits are for when you are running your android OS WITHOUT the 3-dot button bar.
Also, you need to make sure you made certain edits to multimode.ini (not described in my post), or perhaps you have an apk that already contains those edits to multimode.ini.
IGO primo 2.0 Where did you found that?
Sent from my HTC One X
barty22 said:
yeah of course, you need root access, then use Root Explorer (or similar app) to edit the sys.txt located in /data/data/com.navngo.javaclient/
and then you need to have this in the sys.txt, replace the old part with this:
Code:
[rawdisplay]
driver=engine
screen_xy="800_480:1280x670/720x1230"
^^ That will keep your android top bar visible, both in portrait and landscape.
If you would want fullscreen, then use this:
Code:
[rawdisplay]
driver=engine
screen_xy="800_480:1280x720/720x1280:fullscreen"
Good luck!
EDIT: above edits are for when you are running your android OS WITHOUT the 3-dot button bar.
Also, you need to make sure you made certain edits to multimode.ini (not described in my post), or perhaps you have an apk that already contains those edits to multimode.ini.
Click to expand...
Click to collapse
Thanks!
It does start up at the moment, but closes (without warning/error) in about 5 seconds every time I try to run it. Resolution shouldn't be the problem. Any idea what could be the cause?
Am on LeeDrOiDs ROM.
rvdgeer said:
Thanks!
It does start up at the moment, but closes (without warning/error) in about 5 seconds every time I try to run it. Resolution shouldn't be the problem. Any idea what could be the cause?
Am on LeeDrOiDs ROM.
Click to expand...
Click to collapse
Try to rename your DCIM folder on your sdcard to something else... there might be some weird or corrupt image there (don't ask me why that has anything to do with igo though)
barty22 said:
Try to rename your DCIM folder on your sdcard to something else... there might be some weird or corrupt image there (don't ask me why that has anything to do with igo though)
Click to expand...
Click to collapse
This was the problem, After renaming the DCIM folder, everything is working just fine. Strange...
Does anyone else find this extremely heavy? We have the best phone on the market (graphics-wise) and the bloody interface stutters. Igo is obviously obsolete.
Ambious said:
Does anyone else find this extremely heavy? We have the best phone on the market (graphics-wise) and the bloody interface stutters. Igo is obviously obsolete.
Click to expand...
Click to collapse
You're kinda right, but it's the best navigation software for android hands down...
I think the problem is more in the navigation software than in the htc one x. Sygic is also not smooth at all on the htc one x. That's also the reason why I would love to see tomtom for android, but even though they promised it for this summer, I still haven't seen it.
I'm still having trouble configuring it, I tried a lot of multimode.ini / sys.txt modifications. I either get a 1280x720 not supported error, or it closes itself after a few seconds (renaming DCIM does nothing). I'm on stock ROM, not rooted, so I can only edit multimode.ini inside the data.zip archive. The .apk is supposedly made for 1280x720, but maybe I should use another one?
Any help would be appreciated. Thanks!
darthmelk said:
I'm still having trouble configuring it, I tried a lot of multimode.ini / sys.txt modifications. I either get a 1280x720 not supported error, or it closes itself after a few seconds (renaming DCIM does nothing). I'm on stock ROM, not rooted, so I can only edit multimode.ini inside the data.zip archive. The .apk is supposedly made for 1280x720, but maybe I should use another one?
Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
Have you rooted your phone? How did you manage to access the data folder on the phone?
Just curious.
Rgds.
Pushu.X
Sent from my HTC One X
pendragon1 said:
I think the problem is more in the navigation software than in the htc one x. Sygic is also not smooth at all on the htc one x. That's also the reason why I would love to see tomtom for android, but even though they promised it for this summer, I still haven't seen it.
Click to expand...
Click to collapse
Still, Waze works great and so does Google Maps, and the latter uses bloody 3D Satellite imaging.
The capability exists, it's just that most big-name navigation software (Igo, Sygic, etc) haven't really rebuilt their core engines from the bottoms up in ages, and rely on decade-old technologies.
Iceberger said:
This was the problem, After renaming the DCIM folder, everything is working just fine. Strange...
Click to expand...
Click to collapse
Do you have old pictures from another phone in DCIM folder? I had old photos from my old phone, until I moved them then iGO worked.
Apparently, photos with Geographic data will appear in the iGO map as POI, so that might be the problem.
darthmelk said:
I'm still having trouble configuring it, I tried a lot of multimode.ini / sys.txt modifications. I either get a 1280x720 not supported error, or it closes itself after a few seconds (renaming DCIM does nothing). I'm on stock ROM, not rooted, so I can only edit multimode.ini inside the data.zip archive. The .apk is supposedly made for 1280x720, but maybe I should use another one?
Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
[FIX] IGO Primo FULL SCREEN on HTC ONE X
if you want igo primo 2.0 on your htc one x just pm me and i'll be happy to help you.
// this because i can't share here files that work well ....
SbTro said:
if you want igo primo 2.0 on your htc one x just pm me and i'll be happy to help you.
// this because i can't share here files that work well ....
Click to expand...
Click to collapse
can you send me the link for primo 2.0
[email protected]
macavita said:
can you send me the link for primo 2.0
[email protected]
Click to expand...
Click to collapse
dude, and everybody, don't ask for pirated software on xda...
works
SbTro said:
if you want igo primo 2.0 on your htc one x just pm me and i'll be happy to help you.
// this because i can't share here files that work well ....
Click to expand...
Click to collapse
Works great.
tried it on a non rooted HOX
SbTro said:
if you want igo primo 2.0 on your htc one x just pm me and i'll be happy to help you.
// this because i can't share here files that work well ....
Click to expand...
Click to collapse
macavita said:
can you send me the link for primo 2.0
[email protected]
Click to expand...
Click to collapse
Any more talk of warez and bans might be handed out.
omar302 said:
Do you have old pictures from another phone in DCIM folder? I had old photos from my old phone, until I moved them then iGO worked.
Apparently, photos with Geographic data will appear in the iGO map as POI, so that might be the problem.
[FIX] IGO Primo FULL SCREEN on HTC ONE X
Click to expand...
Click to collapse
Works great. Thank you
Hi. I have a galaxy s with JB and i installed primo 2. It works ok exept the voice. can someone help me?