Related
Hi to everybody!
I've a little problem with my artemis (with wm6)
I flashed the memory withouth remouving the sd card (1gb) and now the pda doesn't see it.
I tried everything,soft and hard reset,system upgrade and patch but nothing work...
Please someone help me!
thanks
I didn´t try it, but maybe this:
http://forum.xda-developers.com/showthread.php?t=305531
will help you.
Good luck!
is that a sdhc card you are using? look for the sdhc patch, in case the rom u use doesnt have it integrated!
elsewise reflash!
good luck
duplicate thread.. matt give the same what i want to give
really thak you for your suggestion but no one works...
I hav already tried to reflash with no success and now i use the patch fot sd corrupted and still doesn't work..
it's not sdhc,i tried that patch 2 hours ago..
I'm starting crying!!
y_bother said:
duplicate thread.. matt give the same what i want to give
Click to expand...
Click to collapse
Sorry i can't find another 3d..can you post the link?
Thank you
sorry mate i meant by that.mat2206 gave the same link i wanted to
i was alittle busy when i open your thread and i posted the link without refreshing it. so i removed it
i'll tray to find a solution for you
y_bother said:
sorry mate i meant by that.mat2206 gave the same link i wanted to
i was alittle busy when i open your thread and i posted the link without refreshing it. so i removed it
i'll tray to find a solution for you
Click to expand...
Click to collapse
ok no problem
thank you for your (future) help!
along time ago.. when i have a nokia mobile (N-gage) a similar problem happened to me.
just a suggest.
try to open it by a vard reader and repartition it. and formatted with fat32
don't know if it works.
some say this worked with them
Make a registry change: hklm>>>drivers>>>SDclass>>>disablepowermanagement: 0. (change this for 1, soft reset and try again...)
ok..something strange is happened so i have to say a long story.
This summer i had a normal nokia with that 1gb sd card but it finished into the sea so i had to change it but i keep the card.
when i tried it in the p3300 it worked but it was full of old stuff so i touch "delete memory" thinking it was referred to the sd.After that the artemis didn't read nothing:mine old 1 gb card and the 512mg card i find in the premium package.
After the uptade to wm6 i just tried mine 1gb card and then ask for suggestion in this forum.
I have just tried the other card,512mb and it works!
So,can i say that is the 1gb card that in doesn't work? (remember that it is finished into the sea..)
thank you for your patient!
Apparently I installed the wrong Energy ROM into my Sprint, I was setting myself to do so when my wife came and distract me so I entered the wrong thread, downloaded and installed it!!
Anybody can give a north!! Please!!
Thanks,
Eladio
eladiogomes said:
Apparently I installed the wrong Energy ROM into my Sprint, I was setting myself to do so when my wife came and distract me so I entered the wrong thread, downloaded and installed it!!
Anybody can give a north!! Please!!
Thanks,
Eladio
Click to expand...
Click to collapse
First I would say bad idea blaming your wife in print. That only spells trouble for you later.
I would say take the SD card out, place a CDMA-based ROM on it, put it back in, go into bootloader, and reflash from the card. NRG doesn't cook radio's into his ROMS so you should be good with just an OS flash.
And just in case you don't know how to flash from SD.
1. Unplug USB cable (not necessary, but KISS)
2. With the phone off, press and hold the vol down rocker then press the power button
3. You'll see the rainbow boot-up, then from there just follow the commands on the screen.
4. After is says Upgrade complete (or something similar, it'll be white text in a blue box in the middle of the screen), press the reset button.
Voila.
Hope this helps.
eladiogomes said:
Apparently I installed the wrong Energy ROM into my Sprint, I was setting myself to do so when my wife came and distract me so I entered the wrong thread, downloaded and installed it!!
Anybody can give a north!! Please!!
Thanks,
Eladio
Click to expand...
Click to collapse
Man up and take responsibility for your own actions, Eladio.
eladiogomes said:
Apparently I installed the wrong Energy ROM into my Sprint, I was setting myself to do so when my wife came and distract me so I entered the wrong thread, downloaded and installed it!!
Anybody can give a north!! Please!!
Thanks,
Eladio
Click to expand...
Click to collapse
I'm wondering just what excatly she was doing to distract you so much that you would flash a GSM ROM on your CDMA device.....
Just follow the instructions in the second post. Next time try to use a proper thread title. "Big Mistake!!! Help" Really doesn't help you any faster!
I could make a small joke about your post but I'm not gonna... ....today....
This thread will probably be closed very soon. You better search before blaming your wife next time
eladiogomes said:
Apparently I installed the wrong Energy ROM into my Sprint, I was setting myself to do so when my wife came and distract me so I entered the wrong thread, downloaded and installed it!!
Anybody can give a north!! Please!!
Thanks,
Eladio
Click to expand...
Click to collapse
You are lucky you only temporarily lost the phone. Other people have worse experiences.
That aside it is easy to fix as mentioned above just put the cdma rom nbh file on the root of sd card and make sure it is called RHODIMG.nbh and then enter into boot loader. The rom will install automatically and you will have your phone restored
cr1960 said:
I'm wondering just what excatly she was doing to distract you so much that you would flash a GSM ROM on your CDMA device.....
Click to expand...
Click to collapse
Please post pics!!!
kimtyson said:
Please post pics!!!
Click to expand...
Click to collapse
lmao...its musta been good
tmotp2jc said:
First I would say bad idea blaming your wife in print. That only spells trouble for you later.
I would say take the SD card out, place a CDMA-based ROM on it, put it back in, go into bootloader, and reflash from the card. NRG doesn't cook radio's into his ROMS so you should be good with just an OS flash.
And just in case you don't know how to flash from SD.
1. Unplug USB cable (not necessary, but KISS)
2. With the phone off, press and hold the vol down rocker then press the power button
3. You'll see the rainbow boot-up, then from there just follow the commands on the screen.
4. After is says Upgrade complete (or something similar, it'll be white text in a blue box in the middle of the screen), press the reset button.
Voila.
Hope this helps.
Click to expand...
Click to collapse
Well, I agree with this causing problems... I was so desperate I wasn't thinking!!! BIGGER MISTAKE!!!
Regarding your instructions it was just perfect, I actually struggled about 3 more hours and none of the ROMs I had/downloaded were working, I thought I really screwed bad... after some more search I found what was happening! The MicroSD card that came with the phone is formated FAT and not FAT32, therefore everytime I was trying it wasn't finding the ROM...
Anyway, all is working now, thanks a lot for the quick response yesterday!
Guys, you're so funny, and helpful too!
I better don't go into details of what she was doing...
I'll do my homework next time, tks for all help!
Hello, I have an AT&T Tilt 2 and when I want to boot off xdandroid 2.2.1 I did the .cab file, soft reset, startup.txt, went into the program, update, boot. It types a bunch of codes, and stops at misc_register(): OK. And it stays there as long as I can see! It won't go any further, however, when I restart the phone, it boots normally in to WinMo. I'm running the stock shipped ROM. Does that have anything to do with it? I'm not getting any errors or anything, just stuck at that. And I know it's not me not waiting, because I've sat it down for 2 hours straight! Please help I really want Android on my Tilt 2.
P.S. I've tried RAR and CAB, also the Reference & Froyo!
Try a clean bundle. Format the card using the HP tool. Full format, FAT32.
Also, try this bundle. It's the newest of the new.
thephoneguru said:
Hello, I have an AT&T Tilt 2 and when I want to boot off xdandroid 2.2.1 I did the .cab file, soft reset, startup.txt, went into the program, update, boot. It types a bunch of codes, and stops at misc_register(): OK. And it stays there as long as I can see! It won't go any further, however, when I restart the phone, it boots normally in to WinMo. I'm running the stock shipped ROM. Does that have anything to do with it? I'm not getting any errors or anything, just stuck at that. And I know it's not me not waiting, because I've sat it down for 2 hours straight! Please help I really want Android on my Tilt 2.
P.S. I've tried RAR and CAB, also the Reference & Froyo!
Click to expand...
Click to collapse
Greetings,
I too have a Tilt 2. In the past I've had many problems with xdandroid and other android ports. I personally prefer to use the manual installation, that way I can control what and where things are placed. I'm currently running the the latest FRX04 release on my Tilt2. Here is how I got it working.
1..Download the RAR package.
2..Format your SD Card (not a quick format)
3..Copy the andboot directory to your SD Card
4..Replace the startup.txt with the one attached here.
5..In WinMo run Haret and let it do it's thing.
6..Once in Android test all your apps.
This worked for me, but until I switched to a newer SD Card I would have random reboots and hang ups.
Post any more complications you have I may be able to help you.
dcmedic said:
Greetings,
I too have a Tilt 2. In the past I've had many problems with xdandroid and other android ports. I personally prefer to use the manual installation, that way I can control what and where things are placed. I'm currently running the the latest FRX04 release on my Tilt2. Here is how I got it working.
1..Download the RAR package.
2..Format your SD Card (not a quick format)
3..Copy the andboot directory to your SD Card
4..Replace the startup.txt with the one attached here.
5..In WinMo run Haret and let it do it's thing.
6..Once in Android test all your apps.
This worked for me, but until I switched to a newer SD Card I would have random reboots and hang ups.
Post any more complications you have I may be able to help you.
Click to expand...
Click to collapse
ooooooh!
I will try this startup for my tilt2!
I am having issues like screen landscaping wrong way sometimes etc.
I will report back. Perhaps we get them to pack your startup in the file under "Tilt 2 ATT GSM" or something!
What SD card did you end up getting?
Thanks!
Prodeje79 said:
ooooooh!
I will try this startup for my tilt2!
I am having issues like screen landscaping wrong way sometimes etc.
I will report back. Perhaps we get them to pack your startup in the file under "Tilt 2 ATT GSM" or something!
What SD card did you end up getting?
Thanks!
Click to expand...
Click to collapse
I already had multiple sd cards, Tiad brought it up to try and change my sd card in a conversation the other day, but I'm using a SanDisk 2GB. My SanDisk 4GB is about 4 years old and believe they do wear out. Older cards aren't good for what we need here, since they are basically or on board device storage.
As for the landscaping, sometimes if a hold the phone flat it will switch to landscape left or right, but I usually do not have a problem when I'm holding it in the orientation I'm needing.
That is the same startup file I have used through out 3 different builds. FRX03, FRX04, and FROYO X. I did have overclocking in there, but come to find out it didn't help, I feel that it probably was the cause of a few of my restarts.
I hope everything works out for you. Report back..
dcmedic said:
I already had multiple sd cards, Tiad brought it up to try and change my sd card in a conversation the other day, but I'm using a SanDisk 2GB. My SanDisk 4GB is about 4 years old and believe they do wear out. Older cards aren't good for what we need here, since they are basically or on board device storage.
As for the landscaping, sometimes if a hold the phone flat it will switch to landscape left or right, but I usually do not have a problem when I'm holding it in the orientation I'm needing.
That is the same startup file I have used through out 3 different builds. FRX03, FRX04, and FROYO X. I did have overclocking in there, but come to find out it didn't help, I feel that it probably was the cause of a few of my restarts.
I hope everything works out for you. Report back..
Click to expand...
Click to collapse
will do!
which exact package are you using now?
link appreciated if not already posted above.
Is it a good idea to delete the ts-calibration file as in XDAndroid2.2Froyo.012211 ?
Any other cleanup measures?
Prodeje79 said:
will do!
which exact package are you using now?
link appreciated if not already posted above.
Is it a good idea to delete the ts-calibration file as in XDAndroid2.2Froyo.012211 ?
Any other cleanup measures?
Click to expand...
Click to collapse
I'm using the same package as arrrrrgh posted in Post #2. I just left the touch screen calibration file that came with the package. No other clean up, other than full format to fat32 with your preferred utility.
dcmedic said:
I'm using the same package as arrrrrgh posted in Post #2. I just left the touch screen calibration file that came with the package. No other clean up, other than full format to fat32 with your preferred utility.
Click to expand...
Click to collapse
OK cool, I will give that load a shot tonight.
As of now I am using: XDANDROID.2.2.1.AOSP.FRX03.21.11.10.FULL_PACKAGE
My screen issues are gone now with those tweaks! thanks so much!!!
Although now this thing seems dog slow.
I took out my line "clock-7x00.a11=500" which I think is just stock anyway.
You do not use this command as you noted issues overclocking. Thus yours should be stock speed too right?
This thing is sloooooow now from earlier with my old 'incorrect' stock config in the RAR package.
I also have the weird typing issue in which I press c once (on the hard keyboard slideout), but cccc appears. I think if I type a word super slow, it works better.
So if i type cingular at a decent pace, it will type out 'ccccingularrr'
Any leads on that?
you may need to delete your data.img file and rebuild it with the new startup.txt. that way android is running at stock speed during the setup. shot in the dark.
Sent from my Tilt 2 using the XDA mobile application powered by Tapatalk
Prodeje79 said:
OK cool, I will give that load a shot tonight.
As of now I am using: XDANDROID.2.2.1.AOSP.FRX03.21.11.10.FULL_PACKAGE
My screen issues are gone now with those tweaks! thanks so much!!!
Although now this thing seems dog slow.
I took out my line "clock-7x00.a11=500" which I think is just stock anyway.
You do not use this command as you noted issues overclocking. Thus yours should be stock speed too right?
This thing is sloooooow now from earlier with my old 'incorrect' stock config in the RAR package.
I also have the weird typing issue in which I press c once (on the hard keyboard slideout), but cccc appears. I think if I type a word super slow, it works better.
So if i type cingular at a decent pace, it will type out 'ccccingularrr'
Any leads on that?
Click to expand...
Click to collapse
Holy crap dude... search. You've asked so many questions that have been answered previously, seriously.
With that said, all the issues you describe are all related to the system_server bug. Just make a call to voicemail (or any call really) and it'll clear up. We're looking into the cause and a potential solution.
dcmedic said:
Greetings,
I too have a Tilt 2. In the past I've had many problems with xdandroid and other android ports. I personally prefer to use the manual installation, that way I can control what and where things are placed. I'm currently running the the latest FRX04 release on my Tilt2. Here is how I got it working.
1..Download the RAR package.
2..Format your SD Card (not a quick format)
3..Copy the andboot directory to your SD Card
4..Replace the startup.txt with the one attached here.
5..In WinMo run Haret and let it do it's thing.
6..Once in Android test all your apps.
This worked for me, but until I switched to a newer SD Card I would have random reboots and hang ups.
Post any more complications you have I may be able to help you.
Click to expand...
Click to collapse
Hello, thank you for the quick response. I did exactly what you said. And once I tap Haret it codes and stops at misc_register(): OK still... Any other suggestions? Thank you agian.
it probably doesn't matter, but is your phone all unlocked etc and able to be flashed with any winmo rom?
using olipro?
just trying to think of any differences with our phones.
Prodeje79 said:
it probably doesn't matter, but is your phone all unlocked etc and able to be flashed with any winmo rom?
using olipro?
just trying to think of any differences with our phones.
Click to expand...
Click to collapse
What is unlocked? Isn't that where T-Mobile would be able to use it?? If not, please explain. Sorry for my stupidness. lol
Is it like jailbreaking and/or rooting?
You do not need to do hardSPL unlocking to use Android from the SD card.
I would imagine with NAND builds you would... but since this all runs off the SD card, no need for HSPL.
Assuming you're using that build that was posted in post #2, it should work just fine - did you make any changes to it, or just extract it to the root of your SD and hit haret.exe...?
thephoneguru said:
What is unlocked? Isn't that where T-Mobile would be able to use it?? If not, please explain. Sorry for my stupidness. lol
Is it like jailbreaking and/or rooting?
Click to expand...
Click to collapse
well mainly just the hard SPL unlocking. Not the sim.
very easy.
see the stickies here: http://forum.xda-developers.com/forumdisplay.php?f=490
mainly:
Hard-SPL Unlocker for Rhodium (AT&T Tilt 2) Released and Updated! New FAQ added!
http://forum.xda-developers.com/showthread.php?t=550131
and flashing...
[Resources] Flashing your First GSM Rhodium Rom (For Noobs)
http://forum.xda-developers.com/showthread.php?t=550540
if you do this don't forget to task 29!
http://forum.xda-developers.com/showthread.php?t=649191
I use the energy rom GTX:
http://forum.xda-developers.com/showthread.php?t=562773
I just backed up all my contacts on my SD card with pimbackup and restored them to the new rom....
Again, to thephoneguru - you do not need to do that ^^.
Only if you want to install a custom WinMo ROM, or if you're flashing to full Android (which is not recommended at the moment!) do you need to do HSPL.
arrrghhh said:
You do not need to do hardSPL unlocking to use Android from the SD card.
I would imagine with NAND builds you would... but since this all runs off the SD card, no need for HSPL.
Assuming you're using that build that was posted in post #2, it should work just fine - did you make any changes to it, or just extract it to the root of your SD and hit haret.exe...?
Click to expand...
Click to collapse
I did not make any changes at all I just put the androot directory on the root of my sd, went to the file explorer and tapped haret.exe. Also, the sd card was just formatted (non quick format) to FAT32.
arrrghhh said:
Again, to thephoneguru - you do not need to do that ^^.
Only if you want to install a custom WinMo ROM, or if you're flashing to full Android (which is not recommended at the moment!) do you need to do HSPL.
Click to expand...
Click to collapse
well we get the picture!
its the only difference I can think of in our phones.
I say give it a shot, it is so simple!
Prodeje79 said:
well we get the picture!
its the only difference I can think of in our phones.
I say give it a shot, it is so simple!
Click to expand...
Click to collapse
How is it so simple? Can you explain the procedure? Thank you.
thephoneguru said:
How is it so simple? Can you explain the procedure? Thank you.
Click to expand...
Click to collapse
He posted a lot of links on how to do it... Post #15?
It won't have any effect on your issue tho. It'll only enable you to flash custom ROMs if you so choose to do so.
Let's focus on your issue. Can you tell me where it stops? Does it always stop at the same place? Have you tried different kernels? Any different builds? Have you tried the newest FRX04 build?
I read alot of times the suggestion is to format the sd card. My question is since I am still new is do I simply move what I want to save (pictures) to my PC and then format? Do all the folders get automatically put back?
Thanks
vcaewagner said:
I read alot of times the suggestion is to format the sd card. My question is since I am still new is do I simply move what I want to save (pictures) to my PC and then format? Do all the folders get automatically put back?
Thanks
Click to expand...
Click to collapse
Copy the data you want to your PC, format it, and copy the data back. Formatting destroys all data on the card.
Will the folders on the card now be put back on at some point by the phone itself?
vcaewagner said:
Will the folders on the card now be put back on at some point by the phone itself?
Click to expand...
Click to collapse
Anything you didn't put there yourself, or download to it (e.g. in a browser, through Beautiful Widgets, or photos), yes.
Thanks. I am one of those noob's that was de-flowered in the world of flashing roms by Frozen 1.01. Went to 1.02 and was late to work becuase of 1.1 coming out last night. Thanks for what you all do and how much help you guys give to guys like me.
vcaewagner said:
Thanks. I am one of those noob's that was de-flowered in the world of flashing roms by Frozen 1.01. Went to 1.02 and was late to work becuase of 1.1 coming out last night. Thanks for what you all do and how much help you guys give to guys like me.
Click to expand...
Click to collapse
Thanks for your support!
I'm also still pretty new too. What is the benefit of formatting the sd card? I've never done it but I flash different roms all the time to check them out.
Sent from my SPH-D700 using XDA Premium App
Ok im trying to install android on my sprint htc touch pro 2 And im doing everything right but when i run heret and the white text comes up And then it goes into a bootloop sayin 4.4 already on my phone whatever that means! i reset my phone and memory card a million times and still same thing! can somebody please help me asap
aymen95 said:
Ok im trying to install android on my sprint htc touch pro 2 And im doing everything right but when i run heret and the white text comes up And then it goes into a bootloop sayin 4.4 already on my phone whatever that means! i reset my phone and memory card a million times and still same thing! can somebody please help me asap
Click to expand...
Click to collapse
Did you try with a clean SD Card?
And is it a error message that pops up telling about 4.4 or do you read it in the booting lines?
i had to use a different sd card aperntly only 2gbs and under work :/ so yeah i have android now its pretty sick! but how do i get phone calls to work? it crashes everytime i try! i have frx05
aymen95 said:
i had to use a different sd card aperntly only 2gbs and under work :/ so yeah i have android now its pretty sick! but how do i get phone calls to work? it crashes everytime i try! i have frx05
Click to expand...
Click to collapse
I really think you should (1) read the FAQ in the XDAndroid development threads and (2) move your questions over there to get more answers. Just reading those threads might help you.