Hey guys
Im using stock r3a rom and noticed that the embedded java manager does not respond to touch imput in certain apps. It works on other cooked roms and on the old stock roms. Is there maybe a registry fix or something ?
Also I installed the x2 myriad java cab and that doesnt work either. Apparently there are some registry fixes needed for it to work but I dont understand what to do
If someone could please guide me it will be much appreciated.
Related
Hey Guys!
I flashed Pandora Naked ROM few days ago. But sadly there is no VoIP function included. Is it possible to install a VoIP driver after flashing ROM or does the voip function have to be included in the ROM?
If it is possible to install the 'driver' after flashing, do you know a tutorial or do you have a suitable cab for me??
Thx a lot!!
Kaimane
Kaimane said:
Hey Guys!
I flashed Pandora Naked ROM few days ago. But sadly there is no VoIP function included. Is it possible to install a VoIP driver after flashing ROM or does the voip function have to be included in the ROM?
If it is possible to install the 'driver' after flashing, do you know a tutorial or do you have a suitable cab for me??
Thx a lot!!
Kaimane
Click to expand...
Click to collapse
http://www.google.com/search?as_q=v...rum.xda-developers.com&as_rights=&safe=images
and a more specific to hermes search could be:
http://www.google.com/search?hl=en&...e:http://forum.xda-developers.com&btnG=Search
hope you find your answer.
Berd
Is it correct to use this file WM6VoIP.CAB first and after that the SIP Config Tool 2.0.1 (or would you prefer SIPConfigTool 2.0.0?)? Are there still problems with this programs (sry, but I dont want to read more than 100 pages to know that this solution is working). I'm asking because there are some posts which describes problems / a not correctly working with that tools.
Thank you for your help!!
Kaimane
Kaimane said:
Is it correct to use this file WM6VoIP.CAB first and after that the SIP Config Tool 2.0.1 (or would you prefer SIPConfigTool 2.0.0?)? Are there still problems with this programs (sry, but I dont want to read more than 100 pages to know that this solution is working). I'm asking because there are some posts which describes problems / a not correctly working with that tools.
Thank you for your help!!
Kaimane
Click to expand...
Click to collapse
Not sure either way.
I just was trying to help you out in finding your answer.
I don't usually have any concerns trying different cabs, or the such, because I do a Sprite Backup before trying anything.
I installed WM6VoIP.cab first and after that Sip Config Tool 2.0.1. Than I did a soft reboot, setup the VoIP settings via the config tool and everything works.
But ... The bandwidth is too slow! Is there a possibility to reduce the voice quality that the used bandwidth become more less?
Kaimane
Sry for my bad english ... I hope you understand my problem
Hi,
I was wondering if there is a jvm for wm 6 which supports xlets. They are part of the CDC toolkit...
I don't want to have to use midlets as it is quite a big process to convert an existing swing program into a midlet.
Has anyone been able to do this?
Thanks
Edit: I just discovered that esmertec jbed is supposed to support cdc and should support xlet i guess...
but when I run my xlet all I get is a 'File error (???)'
I also know that others have this problem as was posted here:
http://forum.xda-developers.com/showthread.php?t=339579&page=7
But I don't think they were resolved.
Bump:
Has no one ever tried to get xlets working on their phone?
Ok, I found a java manager called CrEme.
It's great it lets you use any standard CDC java app which supports standard swing/awt. So you can instantly port any java app directly to your phone.
XLets/Managed aplications still don't seem to work but given that it runs normal apps, Im not too worried
I don't have any links for it but I've got the files if anyone wants them.
dear user, what does that all have to do with HRDF (Hermes ROM Development Forum)? why don't you ask this kind of questions in GDs (General Discussions)?
guys,
i been trying to get help for a predictive text problem i'm having since i installed pdaviet manilla2d v18 on my hermes. it comes with those diamond keypads and predictive text for enu/esp/fra/ger/ita but not for portuguese (??????)
this rom is special cause it managed to get manilla2d working fine on hermes and still letting me do everything else, without compromising much speed. it's a found and i want to keep it until i find something better.
this rom won't let me install this cab HTC EzInput QVGA FullKbd 0409-RC1.cab which contains the same keypads but with various language packs. it will end up with the insufficient system permissions message. i did get it working on the V19 but this rom version is so buggy i had to step back to V18. I have also tried installing separate language packs but they won't work.
this insufficient system permissions problem has been covered before in this forum but has not been resolved as the one who had the problem found a different cab to use.
the only ways i see for fixing this would be get rid of security - which i've already tried using a microsoft program that keeps querying device for ever and ever and won't let me change anything or maybe finding another similar keypad kit with language packs that won't bump into the security level of this rom.
chef has released V20, will try this too in the mean time.
Check if you have .net 3.5 installed on your Hermes. I find it missing a lot. Re-installing might work too...
ultramag69 said:
Check if you have .net 3.5 installed on your Hermes. I find it missing a lot. Re-installing might work too...
Click to expand...
Click to collapse
I do, yes. This is one of the first things I install after a flash, without it I can't run AdvConfig... have considered that too.
Hi,
I tried searching for java 0000 font. but nothing related came up.
could someone please tell me what is causing my java apps and games to have 0000 menu text?
thanks
any help?
I can't install another Java program cuz the rom i'm using came with it.
im currently using, Jbed 20081002.2.1
thanks
Ray_jai said:
any help?
I can't install another Java program cuz the rom i'm using came with it.
im currently using, Jbed 20081002.2.1
thanks
Click to expand...
Click to collapse
Yes you can ROM files can be writen over, just not removed.
Have you tryed?
If you do a search on here for "esmertec" or "jbed" you should find some alternate java cab files to install. It will even allow you to install jbed on your sd card if you have one.
Thanks again!
for some reason, I had a permission issue last night.
I installed the Jbed Dash WM6 i found around here, and i still get the same issue.
am i missing a font or something?
I also having some sizing issues with that one.
is there a fix? or installing a different one is the only fix?
thanks
Ray_jai said:
Thanks again!
for some reason, I had a permission issue last night.
I installed the Jbed Dash WM6 i found around here, and i still get the same issue.
am i missing a font or something?
I also having some sizing issues with that one.
is there a fix? or installing a different one is the only fix?
thanks
Click to expand...
Click to collapse
Try and soft-reset device then install may be a process running .
Is this with every font? Just taht you may want to try the fix of Tahoma placing #Tahoma.ttf in windows directory as older java reads the first font .ttf
Ok,
so I take the Tahoma.ttf font from my PC and put it into the Fonts folder in the phone?
and name it #Tahoma.ttf?
i tried this, and all the font is still 0000
i also tried it without the #
thanks
Bump?
my windows folder already have a _Tahoma.ttf
i seem to get this issue with every java app i installed.
thanks
hi, does anyone know how to fix this yet?
I can't play any games properly or read the story if all the text is "0000"
i tried the latest Esmertec.Jbed.20080912.5.1a.SP
Try Java fx
http://htcexcalibur.blogspot.com/2009/12/final-release-javafx-mobile-12-for.html
Hi,
im pretty new in this forum. I found out what nice tweaks and apps there are for xperia x1, which you guys just made and i just can tell from vidz and pics, you did a excellent work by far...but:
I saw the tilewave panel for x1 in this forum und tried to install. I already installed other panels like home ui and touch3d earlier, so i know how to install *.cab and choose in panel manager. My Problem with this here, the tilewave, is, that i cant choose it in the panelmanger. I tried several different panalmanager version, like the one for x2 or the SE, but there is no success...
My general question ist: What is required to use the tilewave panel on X1?
Do i need a special rom for that? by the way: what exactly is a rom ? ^^
Before you guys flame me, that i could use the search engine: i did. But everthing i found here is talking about roms or that everyone claims the tilewave panel is easy to install on x1.....And i'm not in all these Rom things either...
I really would like to have this panel, so plz plz help
Some infos:
- Rom Version is: 1.05.207.13 and installed on 5.12.2009...
- After trying to stop all panel manger processes, to install the x2 panelmanager and try with this, i coulndt find any processes in taskmanager but couldnt delete the old panalmanager archive...so i just isntalled the x2 PM....
- the x2 panel manager works really fine, but i cant choose the installed tilewave panel, there is none with that name....
Ok, a little update right now:
I installed a prozess manager to kill the panel manager process and could reisntall the x2 panel manager without any errors or bugs...
The X2 Dialer and the x2 Task Manager could be installend without any problems...
somewhere i found myriad java installer and installed that too, because i hoped it is neccassary for the tilewavepanel...but still no success, the only thing which doesnt work is that tilewave panel..its installed in the right archive (Programms/Panels/) but i still cant choose it from panel manager.....
Plz Help ! ((
Allright....after tryn around the whole day, yesterday....i found out, that the registry entry, which leads to the panel, is wrong...it willl normally registered in "/Program Files/Panels/Tilewave" but if your language settings differs from english, like my german does, you have to change all registry entries there. in my case to: "/Programme/Panels/..."
If anyone got the same problem, i hoped it help....
I got now the problem, that, when i click on messages button in tilewave panel, it zooms in and out, but nothings happens. i quite couldnt find a solution in the forum, so does anyone know how to get this fixed?
I have to edit my informations a gave here....i dont have isntalled any rom, the version of what i have, is the normal firmware i got...(see above in first post)
The Message Button still dont works...
I installed Active X Deploymend and the slideview seems to be installed too, its under "Programme/Slideview
Is it neccassary for a wm 6.1 Xperia X1i (is what i have) to install Slideview in order to use tilewave?
If so, i had problems installing it the manuel way: I had problems to copy all files in /windows/ because the file is in use or allready exists....
All other problems (like time- +1hour) could be solved, but just this little ****ing messages button cant be fixed (((
Plz help, thought you where professionals
allright party- people...after days and days messing around with that problem, i decided to play a last card on my hand and flash my device with a custom rom.
Although i'm absolutly not into that stuff, i viewed your tutorials and see: everything works fast, fine and stable! I have now the Touch it Xperience Ver.12 with additional tilewave panel installed and did the registry trick to fix the hour-faster- problem... it works perfektly ! I think my earlier problems where because of my firmware version (original sony, not a custom..)
I'm so glad right now, about the beautiful,fast and usefull new interface! You people do a great job here and i'm happy there are people like you doing it without any financial afford.
So thx again (altough you didint help me in this post here ;-)), and special thx to Biovolt for his very easy going and usefull tutorials (video+text) and itje for the very nice Touch It v.12 rom !