Develop Bugs

Automated Data Connection choose with user defined behaviour

Dear all,
since one week I have the TP2 and like it a lot. Until the TP2 I used to have an Iphone3G and now of course I have to change my user behaviour a little bit.
There is one big topic I would like to discuss here: DataConnections!
I have the problem, that I dont have a flat option for data from my provider. I have to pay by time and not by traffic. Hence I like to keep the time I am connected to the Net to a minimum!
Is it possible to realise the following with the TP2 (maybe with extra software)?
1. Mobile data connection only manually with immediate cut off after the transfer (for example if I press send/receive for mail). If I want to manually access the net there should be a short message box asking me to connect. Currently I have to use the CommCenter to switch data connection on/off. As I already use nodata to really cut off the automated connection behaviour, maybe this tool can also be used somehow to allow access and cut it off after the sending/receiving is done.
2. Wifi Scan constantly in the background (after manually switching it on) to scan for open networks or prefered networks. If some network is found, it automatically connects, checks internet, do all the other automated updates and stays connected until I manually disable wifi.
As you can see, I want to have some kind of automated, cost efficient, connection behaviour of TP2. The tool nodata, which I currently use is great to cut off the automated connection but is not very flexible
I am looking forward to exchange with you on that topic.
Regards,
dvdjimmy

...does really nobody else need something like this? Or am I just too stupid to use the onboard tools of wm6.1 correctly?
Regards,
dvdjimmy

take a look at bandswitch or commmgrpro...

you can use this registry entry,
for example this will kill automatic the connection after 10 seconds,
or if you dont use...
HKLM\Comm\ConnMgr\Planner\Settings\
CacheTime = 10 (sec.)
SuspendResume = GPRS_bye_if_device_off
http://forum.xda-developers.com/search.php

Dear all,
thank you for your suggestions. The registry is already a good start for me. Many thx. The commgrpro also looks very good. It seems to allow also the disconnect after a certain amount of time.
Anyway, I think I have to program it on my own: My dream would be to have a software which I can tell that I allow Access to the net from now on. Then the software is switching on wlan in the background and constantly scans for open or prefered networks. If such a network is found I would like to get connected to it. If somehow the WLAN connection breaks down and access to the net is no longer possible, the app should ask if I would like to use UMTS instead of WLAN right now. If I answer yes, WLAN is switched off, the data connection is switched on, the transfer is taking place and afterwards the connection is cut off completely and WLAN is switched on again and hopefully finds another open access again
So the main benefit would be, that automatically only the WLAN is allowed to connect. All the dataconnection by UMTS have to be allowed and are immediately switched off.
I would like to program something like this if you can help me on how to start with it, as I have not programmed a lot for the WM Platform until now.
With best regards,
Joachim

Turning the data connection on or off

Hi,
If I read the HTC Desire manual page 128:
Code:
[B][U]Turning the data connection on or off[/U][/B]
...
Press HOME > MENU and then tap Settings > Wireless & networks.
Select the Mobile network check box to turn on the data connection; clear the check box
to turn off the data connection.
We can simply check/uncheck the above option to turn on or off the data connection.
Did you get any problem for turning it back on (from off) ???
Because I read the old HTC Hero (which has this option as well) has problem with this.
When you turn off data, and turn it on again, the phone cannot use data connection unless you soft-reboot.
Reference:
http://code.google.com/p/apndroid/issues/detail?id=33#c10

No probs with mine

I've used this method since last Saturday, saves so much battery on my Desire and when I want the net, I can turn it back on easily enough or if at home just use Wi-Fi.
No problems getting it to turn back on again.

Does this mean I'll have to manually turn data off if I want to use wifi?
Reason why I ask is because I checked my net counter and all my data has come from the data (3G) portion of my phone whilst nothing via wifi.
Probably me being a bit naive as I thought once wifi was on the phone would know to use that automatically as opposed to 3G...
EDIT: Just had a look on my phone and under settings --> wireless and network --> mobile network (uses phone for data connection when wi-fi unavailable) is checked...so would I be correct in assuming that when wi-fi is available data won't be used??
and in Mobile Network Settings --> enable always-on mobile data (uses more power on some mobile networks) is checked (could this be the culprit?)...

Thanks for your feedback, that is certainly a good news.
Btw, does HTC provide a small widget to toggle this easily?
Or you must go through the settings -> Wireless Network -> ... ?
choccy31 said:
I've used this method since last Saturday, saves so much battery on my Desire and when I want the net, I can turn it back on easily enough or if at home just use Wi-Fi.
No problems getting it to turn back on again.
Click to expand...
Click to collapse

there is a widget you can add on your screen to do this (and others) goto widgets then scroll to settings hit the arrow on the right and you get several icons you can drop
airplane mode
bluetooth
gps
mobile network (data)
wifi

Press and hold the power button, it's an option on the quick list.

[Q] Connection Issues

Hello guys, I have a problem here. It seems that whenever I use internet on my desire HD, my network does not automatically connect. I have to manually turn on the mobile network in settings. Do u guys have this problem or which anyone can help?

If I understand you correctly you need to check the box for "always-on" data. Go to: MENU->SETTINGS->WIRELESS & NETWORKS->MOBILE NETWORKS->ENABLE ALWAYS-ON MOBILE DATA.
If you already have that checked I'm not sure what else is causing your data to not be always on, or are you talking about your wi-fi connection?
For that follow path to wireless & networks, but then go to: WI-FI SETTINGS->MENU (soft key by home button)->ADVANCED->WI-FI SLEEP POLICY->(select)NEVER.

I had the same problem.
I had to get a new sim because my old one was 10 years old and wasn't fully compatible with my new phone. It re-sent out over 500 texts from my outbox.
I had to ring my service provider. They said my sim card had a old vault version
Sent from my DHD LeeDroid v1.2 -- Buzz v1.0.6 OC-UV stable at 1.41GHz -- Only ENG S-OFF.

bobbyphoenix said:
If I understand you correctly you need to check the box for "always-on" data. Go to: MENU->SETTINGS->WIRELESS & NETWORKS->MOBILE NETWORKS->ENABLE ALWAYS-ON MOBILE DATA.
If you already have that checked I'm not sure what else is causing your data to not be always on, or are you talking about your wi-fi connection?
For that follow path to wireless & networks, but then go to: WI-FI SETTINGS->MENU (soft key by home button)->ADVANCED->WI-FI SLEEP POLICY->(select)NEVER.
Click to expand...
Click to collapse
Bro, I tried doing this but it still does not work... Any other solutions?

Help...Urgent!

Hi
My phone (HTC Desire HD) is acting very weirdly.
Problems
1. I cannot cannot connect to the internet via my mobile network. It says "use phone for data connection when Wi-Fi is unavailable". I have tried to fix this by doing various things such as doing a reset but nothing works.
2. I have a broadband connection (Wi-Fi) which requires an IP address to be entered. I cannot enter this IP address anywhere and I cannot insert my username and password anywhere in order to surf the internet.
3. I keep on receiving texts from a certain contact with information about my bill for my network service provider
4. My location is stuck on a location, I haven't been in almost a month.
5. My battery life is very poor even with mild usage.
Are these problems from the new update (Android 2.2.1)?.
Please how can I fix these issues?
Anyone have an idea when android 2.3 will be released for the DHD?
Thanks

bump - comon guys someone help me out!!

Hi,
1. What is your settings configuration right now ? (rooted phone, android version ?, did you flashed the ROM....)
2. For the wifi, it's really simple. Go to Settings -> Wireless & Networks -> Wi-Fi Settings and once here, you have to push the menu key, it will show an "Advanced button". After that you have to select "Use statis IP"....
5. For your battery life, perhaps you've installed too many apps and they are running in background (and consume power). Don't forget to turn off hardware functions you don't use (wifi, bluetooth, GPS...) and choose a brightness level not too high if you want to improve your battery life.

Thanks for the reply. I have a non rooted DHD running android 2.2.1

Ok.
Did you checked the "Mobile Network" option in the "Wireless and networks" panel ? otherwise it will never work

[Q] Locate Phone Apps - turn on data connx

Hi,
I've been looking at a few of these 'locate' apps, including Seek Droid, and also the HTC Sense app (with the new HD Rom).
It seems each of these needs the phone to have an active data connection to be able to locate the phone, and do the other features, such as lock / send message / ring.
I have a limited data account so have a toggle for on/off data connection, which I leave off by default.
As such, if I loose my phone, it will 99% likely have the data connection toggle 'off'. And therefore these locate apps won't work.
Does anyone know of
a) a locate app which will turn on data connection?
b) a locate app which doesn't need data connection and can just work with network reception
c) a method of remotely turning ON the data connection (ie turning the toggle from Off to On) -- on this note, i've seen app 'Tasker' which looks like it can do this, but it is extremely expensive...)
Thanks in advance
Rob

No and to be honest it is hard to locate your device and do things like you said without a data connection. Just use something like Where's My Droid which uses text and gps to locate your phone. It isn't exactly what your looking for but it is a nice compromise. Just use the security for your phone to be safe. How much data have you got for your phone?