I'm new to windows CE and xda-developers. I've bought an orange spv m5000just 4 days back. Downloaded the file M5000ruu.exe and followed the instructions.
The problem is the flash wasn't successful and now I get the classic reset to default (button 0) or restart (button X) screen on a white background. Upon pressing 0 I get a message 'clearing now' on the same screen. The screen then goes blank...
Note that I only get to this screen by pressing both softkeys and using the reset button with my stylus.
What do I do? Please help me!
oops! I just saw the dedicated column for the Jasjar/exec/m5000. Could the mods possibly shift my post if its in the wrong section. Thanks and sorry for the slip-up.
After a chat with h_dubli and a few post searches I solved the problem It seemed I missed the backlight + power + reset combination. I also missed the part where the screen is not backlit, so didn't notice anything. Thanks to you guys I read about this and finally installed the latest patch i.e. m5000ruuu.exe (nov 2006). Thanks a bunch guys!!
hi there not sure if my phone is a universal but looks like the pic in the front. anyway i was installin WM6 and when install getdata or sumfink it just went to this blank sceen which says serial v2.01. what do i do nothing works ive tried soft/hard rest nuthin! HELP!!!!!!!
jackador said:
hi there not sure if my phone is a universal but looks like the pic in the front. anyway i was installin WM6 and when install getdata or sumfink it just went to this blank sceen which says serial v2.01. what do i do nothing works ive tried soft/hard rest nuthin! HELP!!!!!!!
Click to expand...
Click to collapse
Remove the battery for 15 minutes or so then re-insert it and try to restart your machine. Note: hard reset requires you to hold down the two - (dash) keys and press the reset button. Some folk (perhaps not you) think that pressing the reset button with the stylus is a hard reset, but that is just a soft one. Good Luck.
you are in the boot loader mode ... read the topic with title :
all of you stuck in bootloader... goodluck.
Tried to upload the software on my MDA Pro and all of a sudden the screen on the MDA goes blank. I've tried master reset and i press 0 and it says clearing or whatever. Then it goes to the USB/Serial Screen and it reads v1.01 at the bottom. What do I do?
Hi, could you please post some more details? e.g. Which version was originally on the Universal and which version did you flash....
Cheers
Michael
Hi,
You just need to run the Upgrade again. As long as it says USB when you have it connected, no harm is done.
Cheers,
vma
No...There is definately some damage done. Its stuck on the boot load screen Where it says Serial at the top and V1.01 on the bottom. I just got it new in the box untouched and totally screwed it up trying to update the software to "UNI_TMUK_130114_130232_11003_WWE_BL101_Ship" I dont know what the original rom software was at all. It went to the grey screen that it is stuck on now and the power nor reset button works. The letters are still there in black on a grey non lit screen. Master reset (soft keys+rest) brings me to the screen but after i press 0 it says clearing now but goes right back to the serial/v# screen(boot load mode)....thats it...
Look it's not damaged. It boots to the bootloader. So long as it has the bootloader it's COMPLETELY recoverable.
1st thing you need to do is look here.
Scroll to the bottom and use method 2... It's a LOT easier and has saved my bacon many times!.
Psi
English OS System 20080801 Edition (ROM image) for M88 MiPhone
Please download from here
If somebody knows how to enter the bootloader mode of this phone please share here with us!
Here is the instruction for this procedure from the supplier which is nor working for me:
"English OS System 20080801 Edition (ROM image) available for download
- To update ROM, format your TF card with FAT32 and unzip all files and folders from the downloaded file into the root folder of the TF card. Then, restart the phone to begin updating. This update converts all non-English versions of this phone into English version."
If somebody can manage to install the ROM please write here the steps!
Thanks!
You can get to the flash update by pressing RESET, MENU, and POWER all at the same time, then release RESET first and wait for a message. The message will tell you to release POWER to do a hard-reset or MENU to do a flash update. In this case, you will release MENU first, then you will get a message asking if you want to update from SD. At this point, none of the buttons do anything so I assume you have to tap the touchscreen. My touchscreen is broken so I couldn't get any further than this.
Problem Fixed!
GnatGoSplat said:
You can get to the flash update by pressing RESET, MENU, and POWER all at the same time, then release RESET first and wait for a message. The message will tell you to release POWER to do a hard-reset or MENU to do a flash update. In this case, you will release MENU first, then you will get a message asking if you want to update from SD. At this point, none of the buttons do anything so I assume you have to tap the touchscreen. My touchscreen is broken so I couldn't get any further than this.
Click to expand...
Click to collapse
Thanks for your help, m8. It didn't work that way for me. I was adwised to do this:
1. Duplicate the update.img file and rename the second one as "uploader"
2. Copy both "update.img" and "uploader" on the SD - formatted in FAT32
3. Press POWER and HOME butons at the same time.
4. There are two possible options from here:
a) White screen with blue text showing "Upload image... please wait..."
b) Red screen with the options what to do in the next step -
5. I saw first the a) option - the white screen. So after 3 minutes of waiting the phone said it is done and it will selfrestart. After the restart - voila! There was the English OS loaded on my phone and everything was working perfect!
Hope this to help to other people too!
Wow! It was very detailed and finally i resolved my problem. Thanks!
Does somebody knows how can i uninstall the fung S2U2? It causes a lot of problems with the horizontal screen ant others. It's not in the list of "remove programs".
Check this out:
ZEMONTI said:
Wow! It was very detailed and finally i resolved my problem. Thanks!
Does somebody knows how can i uninstall the fung S2U2? It causes a lot of problems with the horizontal screen ant others. It's not in the list of "remove programs".
Click to expand...
Click to collapse
Check this out:
Resco explorer
Pocket Mechanic
Pocket Toolman
Resco is very useful thing so the other two are very powerful as well. You will definetely uninstall S2U2 with more than one of them.
Good luck!
Hi, is it existing a French release of this rom for M88 or can you help me for translate it ? Cordialy
Sorry for my english very bad...
MMS works in this rom?
MMS works only with Arcsoft_MMS_Composer_v5.0.31.16
bye
Mark
i have aquestion... : I was screwing around with the m88 phone and put in the original rom in (I've done this many times) but this time i forgot to use the other three files .img and ... i only had the update.img in the card... then when i tried flahing it , it was reading but the battery fell out and now it wont turn on.... any ideas on how i can fix this... ???? I really need the help please!!! If it is possible to fix this.
helppp
I need help i was updating mi os , but it takes more than a half of hour , and now it wont turn on again how can i fix that? thanks?!
problems
i have a daxian +999
i flash it whit that file it work but now i have a white screen the phone looks like ok but nothing shows in the screen only a white screen what i can do ??
My touchscreen does work but I get the white screen asking me "updated from SD card?" then it just sits there. I dont have a keyboard to hit Y. None of the buttons do anything. Touching the screen does nothing.
*edit* figured it out. You just keep holding the power button down. Then it flashed to a solid purple screen. I went wtf.... it screwed up again? then after a few minutes it booted up.
problems in m89
hello, I recently bought a M89.
In general the phone is great, but mine has a very big problem.
As a PDA it works great, but when I insert my SIM card the phone just freezes. It works for just a minute after the SIM is inserted. I've even been able to make one or two calls before it freezes.
But past one or two minutes it just stops working. It doesn't respond to anything at all, the only solution is to remove the battery.
I think the problem is in the firmware. I've reinstalled a bunch of diferent firmwares: wm6 english, wm6.1 spanish, wm6 english again... and nothing works.
can anyone help me???, 'cause this is really killing me :'(
Thanks in advance!
oic0 said:
My touchscreen does work but I get the white screen asking me "updated from SD card?" then it just sits there. I dont have a keyboard to hit Y. None of the buttons do anything. Touching the screen does nothing.
*edit* figured it out. You just keep holding the power button down. Then it flashed to a solid purple screen. I went wtf.... it screwed up again? then after a few minutes it booted up.
Click to expand...
Click to collapse
Just wondering - What is the size of your microSD card.
As far as I know m88 does not support SD card greater that 4 Gb by default.
Please, let us know.
Updated from SD Card ?
Hello, first of all I want to say thank you because I learned a lot from this thread. I bought M88 phone some months ago and is the first time I cannot use ( I really don't know what went wrong but finally the phone is not working or frezze ).
I bought 2Gb card and was formatted in FAT32. I also complete all steps in order to load the original image but I got this message: "updated from SD card?" and nothing more... What button must be pressed ?
I'll go crazy... do you know what's the next step ?
Thank you very much.
i dont understand sorry. i have to copy the "update" imgfile and rename it as "uploader"... and leave this two files : "update and uploader" in the root folder ?
I've install ROM from this topic: http://forum.xda-developers.com/showthread.php?t=452848
and now, when I try power on my MiPhone - it show only white screen - please help!
bootloading
the file, atleast on windows 7, shows up as "update". Also, I found it works must faster and easier to make 3 copies (4 files total)
naming 1: update.img
2: uploader.img
3: Update
and 4: uploader
(so the last 2 don't actual have .img in the title)
Then just make sure you hold down both the buttons, and vuo-la! haha
Doesn't fix the MMS problem though.
Does anyone know how to make it so that it can use mms?
Miphon m88
Danke es funktioniert supper !!
i got white screen too ;[ how to fix my phone now ;/ i dont see enythink ;[
I tried to update my htc universal O2 to a room. but after a long time nothing was going to work and I broke it, now my screen is black but can be seen that written on the top serial and on the bottom v2.02. When I try again with other program show me that there is no old and no new system and will not done. My English is bad, and please try to understand this!
Hi there
Put your device in bootloader mode (hold the power button and the light button and put the stylus in the reset hole at the same time),and then connect your device to your computer and then reinstall the original rom.That is it.
Welcome to forums
have a read on my signature link, you´ll find all you need
Good luck,