Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks
I have no problem at all with Netgear router. Try changing the connection speed setting in the router to the "b" mode only. Hopefully this can solve your problem.
No problems here either I'm afraid. I'm using a Draytek Vigor 2600VG at home and at work there are two of us with XDA IIs using a Linksys BEFDSR41W wireless router and no problems there either.
Sorry! :-(
Try a hard reset (gulp!) and see if you still have problems (Without anything else installed that might be inteferring) otherwise might be a faulty unit perhaps.
--Neil
I second what xanth said, I had the problem where wifi would not turn on, so I hard reset and installed each software back individually the problem was Calligrapher 7.3 did not like being in Storage or Storage Card only in Main memory (go figure)
efjay said:
Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks
Click to expand...
Click to collapse
I use the XDA IIs on a variety of wireless networks and experience problems with an alarming regularity. The most annoying is the fact that the top bar seems to loose functionality, when using wireless!!
I will actually add that I do seem to have problem with the "range" of WiFi.
I need to do more testing, but it doesn't seem to be more than 20m or so before have communication issues/timing out :-( Will have to find out what our walls are made of!!!
I have problems connecting sometimes. I regularly use three routers, Draytek, Buffalo and Belkin. The only time that it locks up is when using skype. The skype problem is a known issue with no cure.
Nigel
I am having a problem where my Siemens SX66 will loose connection to my Microsoft MN700 wireless AP on occasion. -It simply appears as if the Wifi radio shuts itself off.
Weird.....
Wifi has never worked for me. It simply doesn't work in the way nature intended.
The main problem (as far as I can tell) seems to be that it cannot get DNS or IP configuration settings from my router (Belkin 7630) automatically.
It can connect to my wireless network without any hassle, but that's about it. If I enter DNS and IP settings manually it works fine. But this is unworkable if you want to connect to another wireless network.
If I can't sort this out by next week I'm going to sell the unit on eBay. It's been nothing but a pain since I mistakenly bought it in December.
Wifi is a nightmare on this device! I'm going back to Nokia.
I am going to do a hard reset and test to see if i still get any freezes. Anyone know of any software i can use to backup my text messages?
WiFi
Hi guys,
Haven't had too many issues with WiFi over here - standard O2 Asia ROM (with the BT 3500 update).
I'm running a Netgear WG602 @ home with 64bit WEP and a Dlink AP2100 @ work with WPA-PSK. No connectivity problems at either location, both DHCP. It does however take a few minutes to connect, but this is on the odd occasion.
The only frustrating thing with the WiFi is that I have to soft-reset often to turn Wi-Fi on - any ideas? Hopefully O2 will fix this in the next ROM. Other than that, I've had the Nokia 9500, P900/800 and this is by far the best device for the power user.
Just me 2c!
Cheers
cK
Wifi is on all the time on my device, sometimes when I switch the device on while within range of an AP it does not connect. Often switching wifi off and then onn again causes it to connect. If this does not work then I can often go into the network dialogue section, and see the network marked as 'availble' but not connected (why it sometimes does not auto connect I dont know). Tapping connect usually cures. If that does not work then I too need to soft reset.
I hope like you that they fix this cause its damned anoying. I will be interested to see what the Benq P50 is like when its released. I shall get one from expansys to test and ship it back within the 7 days.
Nigel
As for those having problems with specific access points. It is not nessesarily the fault of the blue angel. It seems to me that none of the manufacturers of wireless kit understand the term 'standard' they all seem to have their own take on it, which is why kit from different manufacturers refuses to talk to each other. I am of the opinion that they do it in purpose to lock you into using their client cards with their AP's !!
Try it with some non Belkin kit and see what happens.
Nigel
Well i tried a hard reset and didnt install any apps and tried connecting to wifi again and still got a lockup and loss of connectivity. Im going to swap the router for another make and see what happens
Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.
Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.
XDA IIi and wifi
I just bought one of these and can't get it connected. I have a netgear wg602 access point. When I finally figured out how to set the IP manually (the 02 xda tech support said it can't be done - maybe they're right ;-)
I now have it saying it's connected, with right IP address. My DNS and gateway are set up for the wireless adapter in network adapters. The signal is average. The XDA says wifi is connected. The access point even says it's authenticated and associated - same as my other stations.
Only problem is, internet explorer doesn't find any web pages - says "The page you are looking for cannot be found" (works fine through GPRS)
Also, terminal services times out trying to connect to an internal IP address (to eliminate DNS as a problem)
So, anyone know how I troubleshoot network problems - it looks like a TCP/IP issue? Can't find ping or arp etc. I've also tried an IP address that I know works on the network.
thanks for any help
Dave
Hi
For ping, ipconfig and stuff, head to http://www.cam.com/windowsce.html
I have had multiple issues trying to get wifi working reliably. It still fails now, but there are a few tricks to get it working again. Most of my wifi issues have been due to regular use of three AP's [email protected] and [email protected] along with GPRS and VPN.
To start with I suggest setting all the ****e in connections (internet and home network to 'My ISP' then goto your wifi setup, network adapters, and tell it that the wireless card connects to the internet. Now, tap ok, and goto tools, network cards, tap the active connection (it must already be connected) and ensure that its set to internet.
Next soft reset the thing, and wait for it to connect to yr wifi. Now, use the ipconfig tool and ping tool from the above site to check that all is OK. Check that its got the default gateway right and a sensible LAN IP.
I have found on occasion that I can be connected via wifi, but that the device is still trying to talk using an old IP allocated by gprs which means nothing to my lan! IPconfig will show if all is OK.
Whoever wrote the whole of the networking system (and its terrible gui's) on windows mobile wants shooting. I usually have 2 VPN profiles setup under my work network. If I leave it set to that, and use wifi from my lan to connect to the internet all is fine. However if I try and access a local server, the damned thing starts trying to connect a vpn (it aint inteligent enough to work out that the IP I asked it to connect to is local).
I have been trying to find a setting for all this networking rubbish that allows me to do *everything* without reconfiguring each time - to no avail.
Another thing to note is that you cant send/receive MMS messages while wifi is connected (more stupidity), it tries to connect to the MMS server using the wifi connection, and the telco blocks it cause it wants to charge you for sending MMS over GPRS. Only solution is to disconnect wifi, send MMS then reconnect wifi!!!
Nigel
No problems with WiFi for me
Hmm I'm using an O2 Asia Rom as well.. and my wifi manager seems to automatically create "settings" for each AP it detects and I seem to have no problems connecting at all... been using WiFi around my house since the first day i got it..
i am using a Linksys Wireless 802.11b router..
btw I am new here.. finally able to register!
How's everybody doing?
Cannot turn off IEEE 802.1x
Has anyone had problems unchecking the 'IEEE 802.1x netwrok access control' checkbox???
I uncheck it, but then when I go back to the screen (click on the connection | then select 802.1x tab at the bottom) it has checked itself again!
The XDA IIs does not save the setting - it just keeps re checking itself 02 help have been no use - they sent me an instruction manual and it even says in one of the step 'uncheck IEEE check box'
Im am using a netgear wirelesss router and have also tried on a d-link
Sugestions - is anyone else having this problem??
I have a problem with my wifi, at work I connect to a Addon wireless router and most of the time it works ok.
But at the moment I'm having a problem where the phone finds the network, says remembered, secured with wpa/wpa2 psk, then it suddenly drops to not in range and my wifi status is 'disconnected'
It continously is doing this at the moment and just wont connect, the WPA key is correct for it as I have connected fine to the router before.
kevinsmbuk said:
I have a problem with my wifi, at work I connect to a Addon wireless router and most of the time it works ok.
But at the moment I'm having a problem where the phone finds the network, says remembered, secured with wpa/wpa2 psk, then it suddenly drops to not in range and my wifi status is 'disconnected'
It continously is doing this at the moment and just wont connect, the WPA key is correct for it as I have connected fine to the router before.
Click to expand...
Click to collapse
is the signal weak? i.e are you far from the wireless router?
Im sitting next to router and the signal is Excellent
Is there anything on the router that could be blocking my phone from connecting?
yes if someone has setup mac address filtering
Mac restrict mode = disabled
i have a router that every 3months or so i have to reboot!
i see it in the wifi available list but it won't connect
turn off and back on and hey presto.
not ideal i know but hey ho
could try a reboot on phone too
Hello. I have xperia neo for 1 week. It is great phone and great upgrade from my X8 but i see a strange wifi problem. My firmware is latest version - 4.0.A.2.368.
At my home phone connects fine to my wireless network and everything is stable. I do not see any disconnects, reboots or other problems. My router is linksys wrt320N and i connect at wireless N speed - 72Mbps.
When i try to connect to the wireless N network at my office the phone connects fine but i do not have internet access. I have IP assigned by the router, network is shown as connected but i do not have connectivity. I tried with 3 different browsers and with the market and nothing connects. At the same time i can connect with my laptop to the same network and i have internet. My colleagues with other phones also connect and have internet.
I tried setting static IP address on the phone but this did not help. I read that if i set static IP in router's settings assigned to the mac address of the phone this will help. Unfortunately i can not test this because i do not have access to router's settings. Also at my home i did not make such settings and everything is working fine.
Previously i have seen this problem with my X8 and the same work wifi network but it was not always present. It was present with some custom firmwares and not with others.
If you have any ideas or have seen this problem please help.
Having the same device from Globul I never had such problems for the 2 weeks I'm using it. I had some disconnects but i put the blame on my router.
if you can try changing the wifi channels
I think I've found the issue (by facing by myself)
The version neo is shippe (2.3.2) has a serious bug on AES encription.
Actually only the upgrade to 2.3.3 (no clue about upcoming 2.3.4) can fix the WPA/AES issue.
So the actual solutions are:
or change your wifi securty to WEP, updathe the phone via OTA
or use the Windows Software and update to 2.3.3.
Please note that if you use the Control Power widget it has been removed in 2.3.3
This was my problem when I had just bought my Arc.My phone couldn't surf the internet with my personal wifi network although I tried to use many browsers and also Android market. Then I reset and reinstalled my router, everything works well ^^
Ask your office IT staff to do a simple power cycle on the router and try connecting again. That may solve the problem.
So last week my phone began having problems connecting to my Linksys e900 router. If i am more than 10 feet away from the router i lose signal completely. Before this it connected every time without a problem. Sitting at my desk 2 feet away from the router i get 0-1 bars. However i live in an apartment complex so i have a lot of access points to choose from and do not have any problem picking up a few strong signals anywhere in my apartment from my neighbors. My phone seems to be the only thing effected. My Roku, my girlfriends 4s, ipad,nexus 7, and our computers all pick up a signal perfectly anywhere in the apartment.
Things i have tried to fix the problem.
I have tried various roms,stock Blazer jb, CM10, AOKP, and, now Liquid smooth.
Reset router
Changed router channels and frequency
WPS/Non WPS connection
Unsecured router
Moving the router to various spots around the apartment
Turned on/off wifi optimization and just about every other wifi option in the settings menu.
otterbox case on/off
So now im at the point where i just want to go buy another router since i know the phone will connect to other routers. Is there something that i have completely looked over ?
tldr; Phone wont connect to my router, everything else does. Phone will connect to other routers no problem. Tried everything i can think of.
Hi,
I'm on my second P2XL (Panda). Both have had issues where they constantly and apparently disconnect on Wifi.
I have a Virgin Media superhub 3 (tried turning 5ghz off), also a TP link range extender plug. Seems to happen on both devices, it disconnects when I'm right on top of the Superhub router.
Any suggestions?
Thinking it must be the router, any suggestions?
would it be worth renaming either the 2 or 5ghz ssid?
I am a wifi newb and have the hub set on factory settings.
marmin said:
Hi,
I'm on my second P2XL (Panda). Both have had issues where they constantly and apparently disconnect on Wifi.
I have a Virgin Media superhub 3 (tried turning 5ghz off), also a TP link range extender plug. Seems to happen on both devices, it disconnects when I'm right on top of the Superhub router.
Any suggestions?
Thinking it must be the router, any suggestions?
would it be worth renaming either the 2 or 5ghz ssid?
I am a wifi newb and have the hub set on factory settings.
Click to expand...
Click to collapse
I think you are correct on the issue being with the router, and since the repeater gets its signal from the router the repeater is likely not to blame. Changing the SSID would not help. I would first ensure your router (and repeater) is up to date with the latest firmware. My Netgear router comes out with new firmware 2-3 times per year fixing bugs. TP link offers new firmware but not very often. Another solution may be to change the channel the Wi-Fi is using. Usually set to auto, you can change both the 2.4 and 5 Ghz band channels. It could be interference from your neighbors is causing an issue. There are several Wi-Fi apps you can use to find the least congested channels in your home. WiFi Analyzer is one.
If your router is up to date and still causing problems on different channels, you should consider replacing it with a well supported model. No doubt you have used your phone on other Wi-Fi AP's and not had a problem. If you've tried the above with no success, do some research HERE to find a new router.
This is on the Android fanzine sites.
http://www.androidpolice.com/2017/1...ion-problems-mesh-routers-like-netgears-orbi/
FIXED - For me, my router was pumping 2.4 & 5 ghz as same name. I renamed the 5 ghz, forgot connection on phone and connected to the "new" 5ghz.
No drops since.
Think the phone was getting confused when it was at the far reaches of the 5ghz connection.