I have a problem with my wifi, at work I connect to a Addon wireless router and most of the time it works ok.
But at the moment I'm having a problem where the phone finds the network, says remembered, secured with wpa/wpa2 psk, then it suddenly drops to not in range and my wifi status is 'disconnected'
It continously is doing this at the moment and just wont connect, the WPA key is correct for it as I have connected fine to the router before.
kevinsmbuk said:
I have a problem with my wifi, at work I connect to a Addon wireless router and most of the time it works ok.
But at the moment I'm having a problem where the phone finds the network, says remembered, secured with wpa/wpa2 psk, then it suddenly drops to not in range and my wifi status is 'disconnected'
It continously is doing this at the moment and just wont connect, the WPA key is correct for it as I have connected fine to the router before.
Click to expand...
Click to collapse
is the signal weak? i.e are you far from the wireless router?
Im sitting next to router and the signal is Excellent
Is there anything on the router that could be blocking my phone from connecting?
yes if someone has setup mac address filtering
Mac restrict mode = disabled
i have a router that every 3months or so i have to reboot!
i see it in the wifi available list but it won't connect
turn off and back on and hey presto.
not ideal i know but hey ho
could try a reboot on phone too
Related
Hard to believe !
I just got back home and tried to connect my new Blue Angel to my Wifi network and... and... and... it seems that there is no way to connect to an AP not broadcasting the SSID !!!
Can someone confirm this? Why such a restriction? Any workaround (besides broadcasting the SSID) ?
My previous PDA did not have this problem !
Thanks.
You are correct. This does not work with the current driver version (at least the one that shipped with my MDAIII in Germany).
Even if you connect to the AP with the SSID broadcasting and set-up WEP, the link will not be re-established when the SSID broadcast is subsequently turned off on the AP.
I also found that even when SSID BC was on, the MDAIII required frequent resets when turning on Wifi and switching APS. Hopefully they'll supply an updated driver.
BTW: Connecting to non-broadcast SSID does work on an MDAII with a sandisk wifi card using the latest Socket driver (doesn't work with the Sandisk driver).
Cheers,
Martin
Well, it works on my new SPV M2000. My AP has an SSID set, but does not broadcast it. I had to type the correct SSID/WEP key, and it all just worked.
I can connect to my access point, even though it's not broadcasting it's SSID. I think the trick is to name your network the same as the SSID. After turning on WLAN, in the WLAN manager - click tools, then click new connection and name the connection your SSID, and then enter relevant WEP keys, etc.
Be warned that it seems the PDA2K has awful WiFi range, my connection rarely shows over 50%, even in the same room as my access point, and on the next floor of my house, the connection often drops - never had this problem with any laptops or other PPC devices.
@whydidnt and dbarfoot :
Okay, sorry about that. I could not find how to get to the place where you can see the active WLANs APs etc... Seems to work as it used to.
I'll disable again the broadcasting of SSID today to check if it works okay, but I don't expect a big surprise.
I was kind of worried if it really had not been supported properly
Thanks
I've upgraded my TyTn to WM6 using the new repackaged rom from Mrvanx, however I have a weird problem with the wifi.
It cannot see my router whereas before I upgraded there was always a strong signal.
I have set up the WPA encryption key etc. and also set the router up without encryption but it just shows unavailable in the list.
A neighbours network which is also WPA is found OK and it connects and asks for a key.
My laptop is connecting OK to the router so I assume all is OK with the router.
No mac filtering or anything like that installed in the router.
Noticed unlike old wm 5 the wifi Icon only stays active for about 20 secs even though in comms manager the WIFI icon shows it switched on?
Anyone got an idea what might be the problem. I do like the ROM but I do need my wifi on trips and I need to travel soon again so hoping I can fix this.
Al
ROM 3.54,707.3 repackaged
Radio 1.03.03.10
WIfi Woes - part success - update
OK I found the answer but created another question ;-)
For security I turn off the SSID broadcast on my router. I turned it on and the TyTn immediately connected.
I always had a good connection on my original WM 5 ROM without SSID, but it appears the new one will not even see the network without SSID broadcasts.
Are there any other settings in the device to allow it to work without SSID because I am thinking that maybe some free WIFI accespoints have it turned off too?
Al
An issue I am having is:
I will connect my phone to wifi it will connect fine and tell me I am connected.
I could then later on go into the market and try download something I will have wifi bars but the item will pause download. I then come back out to check if my wifi is still connected and it will say authenticating but doesnt change so I then turn the wifi off and back on. It connects again this time when I go back into the market to download something it works fine.
Anyone else have this issue?
Hey guys still having this issue where my wifi looks like its connected but when i go to settings->wireless&networks-> wifi status will say authenticating with wifi.
It only happens me in my house with my router which is a zyxel router doesn't seem to happen in my parents house.
Is there anything I can do to stop this as its really annoying?
funnyclub said:
Hey guys still having this issue where my wifi looks like its connected but when i go to settings->wireless&networks-> wifi status will say authenticating with wifi.
It only happens me in my house with my router which is a zyxel router doesn't seem to happen in my parents house.
Is there anything I can do to stop this as its really annoying?
Click to expand...
Click to collapse
Try changing the authentication type of your router's settings. And if you use MAC security for your wifi, you can disable it.
tkolev said:
Try changing the authentication type of your router's settings. And if you use MAC security for your wifi, you can disable it.
Click to expand...
Click to collapse
How do I change the authentication type?
funnyclub said:
How do I change the authentication type?
Click to expand...
Click to collapse
Well it depends on your router but generally it's under Wireless->Security settings. Mine is with WPA-Personal authentication and TKIP algorithm.
Ok just to update this I have resolved the issue of my zyxel router by changing the security type from wpa-psk to wep.
Wep isnt as secure as wpa-psk but it suites consoles and portable devices better. Since I have changed I havnt been disconnected from the wireless.
I would say that your router has a problem with wpa authentication, I wouldn't recommend a wep authentication. If your wifi signal can be detected from the road where you live I could hack into it in about 10min and many other people plus there a custom antennas that can be made to detect signals and get better range etc.
I recommend you get a better router, something from netgear or belkin would do the job to keep your wifi safe and use wpa+wpa2 together with tkip+aes encryption.
Not sure if this topic belongs here, but since people in xda are generally more knowledgeable, I'll try my luck here.
Here's the deal: I have a Galaxy Nexus. I setup wifi on my router (Linksys WRT54GL+Tomato firmware) and my Galaxy Nexus device is attached on eth1 interface on the router, which is right. However, every once in a while, the I see the wifi indicator on the notification bar goes grey and there goes my wifi connection. I check my router, and see that Nexus is somehow on br0. If I turn off wifi on the phone and turn on wifi again, my router's dhcp will assign my phone to eth1 again, but after a few minutes/hours, my phones goes on to br0 again.
This is very annoying, and I'm wondering if anyone has encountered this or has an idea what's going on?
Thanks,
Yes it happens to me as well. I have a D-link Dir-615 on custom firmware which is connected to the ISP modem. But i dont think my problem is with the router as the DHCP is turned off, the modem sets the address. If there is an unstable connection the modem tries to reconnect and the internet connection on the phone goes grey, but the connection on my pc works fine. I dont know the techical know-how so I just restart the modem and all is well.
At some points in your life, one of your Android devices connect to a wifi router, but can't connect to the internet. However, your computer, laptop or iPad will connect to that same wifi and use the internet just fine. I've looked everywhere on the internet for solutions, some of them are:
+ Turn off and on both modem and wifi router
+ Factory reset wifi router
+ Battery pull your phone, wait 30s and put it back
+ Reflash stock or custom ROM
+ Change DHCP IP setting to Static
+ Disable security (WEP, WPA) on wifi router
+ Check DNS server, gateway IP address for correctness
Fortunately, I stumbled upon this old thread last night -> http://forum.xda-developers.com/showthread.php?t=1371794
It helped fix the internet connection temporarily, turning off and on wifi on phone caused the issue to repeat.
In summary, he found out the correct MAC address for gateway was mismatched with the one on his phone. Even though the gateway IP address is correct (example: default gateway IP 192.168.1.1)
Upon further investigations, I found out my Wifi ROUTER has the same IP address with my MODEM (192.168.1.1) This IP conflict causes the phone to recognized the WIFI ROUTER's MAC address as the gateway's MAC address. This problem mostly occurs on Android phone, not computer (I'm no tech savvy so I have no idea why)
Simple fix: Go to wifi router setting page, change the IP address on wifi router to different number (other than default 192.168.1.1), and the problem should be fixed.
Please help spread the words to fellow Android lovers, I'm sure a lot of us have struggled with this problem :laugh:
I'm one guy who is desperately looking for a solution to this.
Unfortunately the solution you gave didn't work.
Hi
i have a problem with wifi. it remains connected but loses internet access randomly. i found this solution:
"In the wifi networks, select the network you want and select ‘Forget network’
Turn off the wifi
kill all the apps with your task manager
Turn on the wifi again
Connect to the network
Check the internet connectivity
If still the problem exist, switch off the phone and redo the above steps"
it solves the problem, but it happens again after some minutes. actually, i also installed an app named "wifi fixer" which does the above process automatically. when the program is active, it turns the wifi off and on every 2-3 minutes. and the phone has internet access when the program tuns the wifi on.
any idea?
Turn off wifi optimization on some android phones help.
Sent from my Nexus 7 using Tapatalk 4
(bump) By any chance, are you all using Aztech's router? I have the same problem with my Aztech router.
solution?
---
Had the same problem for several months. Changed my router and everything became prefect.
Sent from my Galaxy Nexus using Tapatalk
---
---
2 years after the last reply I am having the same problem. My wife and kids all have internet access on their phones, tablets, desktop and laptops all from the same modem router yet I am unable to use the internet on my Galaxy S2 mobile phone even though my phone says connected to Wi-Fi Network Netgear 06.
The Mac address solution provided isn't applicable to my situation as my Mac address on my mobile is different to my modem router Mac address.
Any other solution?