Develop Bugs

Ask for [have wifi but no 3g networks]..

Hi, as title. I can get almost everything work except 3g network(hspda).
I tried many version of radio rom. and now stay on newest which is 1.71.09.01.
with others, have extra problems.
is there other way to solve this problem?
I really want enable my 3g internet.. Orz

where do you live. what provider do you have

hi,
I still got the same problem.
I already posted in this thread
forum.xda-developers.com/showthread.php?t=693820
but there was no solution so far
I tried different android images from donut to eclair. currently I run polymod 2.1g.
with both I got no mobile network while WLAN works fine.
I tried different radio-version - at the moment 1.71.09.01
I also tested 2 different SIM-Cards from two different providers.
1. Reseller from T-Mobile Germany
2. Reseller from Vodafone (also Germany)
I have not flashed my mobile - I run Android from SD

dwmz said:
hi,
I still got the same problem.
I already posted in this thread
forum.xda-developers.com/showthread.php?t=693820
but there was no solution so far
I tried different android images from donut to eclair. currently I run polymod 2.1g.
with both I got no mobile network while WLAN works fine.
I tried different radio-version - at the moment 1.71.09.01
I also tested 2 different SIM-Cards from two different providers.
1. Reseller from T-Mobile Germany
2. Reseller from Vodafone (also Germany)
I have not flashed my mobile - I run Android from SD
Click to expand...
Click to collapse
Make sure you have 3G enabled under windows mobile. If it's disabled, android will only use 2g networks.
Edit.
Wait i might have jumped the gun. Are you saying that you cannot use mobile internet at all or just 3G?
Maybe your provider/providers data under Access Point names is incorrect?

Hi. I live in Taiwan. and go with Taiwan Cellur.
I have 3G enabled under WM, and I use the method as "NoMoRootFS Instructions for NAND".
I use [Myn’s Warm Donut RL5] with 1.7.1 NBH
You said APN. when I click APN , nothing shows up.

-Arturo- said:
Make sure you have 3G enabled under windows mobile.
Click to expand...
Click to collapse
under WM I have no problems, so it should be enabled there
-Arturo- said:
Wait i might have jumped the gun. Are you saying that you cannot use mobile internet at all or just 3G?
Maybe your provider/providers data under Access Point names is incorrect?
Click to expand...
Click to collapse
yes, I cannot use mobile internet at all. it does not show the available speed in the titlebar (H/3G/...) and it does not connect to mobile internet. browser just says it has no connection.
with wifi enabled everything is fine.
but maybe I have jumped the gun in claiming that I got the same problem than the thread owner... but I thought he has no mobile internet at all, too?
@hitakeane
with donut/1.6 I also had no APN-Entries in the menu and even the provider-list was empty. but with 2.1 this is working.
but mobile internet is not working for me with none of the constellations.
- not with donut and manual APN
- not with eclair and predefined APN
- not with eclair and manual APN
what I was thinking about this morning is: my phone had a netlock for D1. but I entered the official unlock-code from my provider (the phone is older than two years). But could it be that there is any lock left crashing the party?

hitakeane said:
Hi. I live in Taiwan. and go with Taiwan Cellur.
I have 3G enabled under WM, and I use the method as "NoMoRootFS Instructions for NAND".
I use [Myn’s Warm Donut RL5] with 1.7.1 NBH
You said APN. when I click APN , nothing shows up.
Click to expand...
Click to collapse
Go to Access point name in settings invoke the settings menu and press add new access point. You should find all the required data on your gsm provider network.
Sent from my HTC Kaiser using XDA App

dwmz said:
under WM I have no problems, so it should be enabled there
yes, I cannot use mobile internet at all. it does not show the available speed in the titlebar (H/3G/...) and it does not connect to mobile internet. browser just says it has no connection.
with wifi enabled everything is fine.
but maybe I have jumped the gun in claiming that I got the same problem than the thread owner... but I thought he has no mobile internet at all, too?
@hitakeane
with donut/1.6 I also had no APN-Entries in the menu and even the provider-list was empty. but with 2.1 this is working.
but mobile internet is not working for me with none of the constellations.
- not with donut and manual APN
- not with eclair and predefined APN
- not with eclair and manual APN
what I was thinking about this morning is: my phone had a netlock for D1. but I entered the official unlock-code from my provider (the phone is older than two years). But could it be that there is any lock left crashing the party?
Click to expand...
Click to collapse
Have you tried kallt kaffe's latest eclair build? Both 3g and 2g connections work for me on that build.
Sent from my HTC Kaiser using XDA App

-Arturo- said:
Have you tried kallt kaffe's latest eclair build? Both 3g and 2g connections work for me on that build.
Click to expand...
Click to collapse
Haven't tried until now. But it's running on my Kaiser now. But mobile internet is not working for me.
I really like to know what this is. Can't be that tricky when it is working for most of the people except for me and few others. Hm...
I asked google many times for the correct apn-setting. But I always end up with the same 2 settings that I have tried both.

dwmz said:
Haven't tried until now. But it's running on my Kaiser now. But mobile internet is not working for me.
I really like to know what this is. Can't be that tricky when it is working for most of the people except for me and few others. Hm...
I asked google many times for the correct apn-setting. But I always end up with the same 2 settings that I have tried both.
Click to expand...
Click to collapse
I think that in a andboot folder you should have boot log file(or something like that) Look for errors in this file and post them here maybe someone will be able to help you. Also I remember reading somewhere a while ago that it's best to have one of newer winmo roms( 6.5, 6.5.1, 6.5.3, 6.5.5) when running android using haret.

I have seen a HTC Desire from a colleague this morning (also Android 2.1). Right above the submenu "Mobile Networks", where I can configure APNs and so on, he has a checkbox to enable/disable mobile network at all. This checkbox is missing for me. Should it be there?
-Arturo- said:
Look for errors in this file and post them here maybe someone will be able to help you.
Click to expand...
Click to collapse
from bootlog incl. installation:
Code:
- mke2fs: cannot determine if /sdcard/andboot/system.img is mounted
- mke2fs: cannot determine if /sdcard/andboot/data.img is mounted
- Fixing Permissions on files
chown: /data/app_s: No such file or directory
chmod: /data/app_s: No such file or directory
chown: /system/bin/su: No such file or directory
chmod: /system/bin/su: No such file or directory
chown: /system/init: No such file or directory
chmod: /system/init: No such file or directory
chown: /system/etc/init.d: No such file or directory
chmod: /system/etc/init.d: No such file or directory
sh: 2: unknown operand
- mount: mounting /data/sysfiles/su on /system/bin/su failed: No such file or directory
from normal boot:
Code:
- Free space in FSInfo block (245760) not correct (229370)
Fix? yes
Next free cluster in FSInfo block (19674) not free
Fix? yes
- sh: 2: unknown operand
- mount: mounting /data/sysfiles/su on /system/bin/su failed: Too many levels of symbolic links
OT:
-Arturo- said:
...it's best to have one of newer winmo roms( 6.5, 6.5.1, 6.5.3, 6.5.5)...
Click to expand...
Click to collapse
what I don't understand: what has WinMo to do with Android. Ok, it is installed in NAND, but I thought it is not running either?

hi I had a problem simular to this took me days to figure out a temp fix, if your running haret/win mob rather than nand, if you connect to the internet/3g before you start haret, it sometimes picks up 3g ok.

eyupwolf said:
if you connect to the internet/3g before you start haret, it sometimes picks up 3g ok.
Click to expand...
Click to collapse
doesn't seem to work for me, tried it some times. will give it a try with another build later...
but this part of your sentence is even more interesting for me:
eyupwolf said:
hi I had a problem simular to this took me days to figure out a temp fix, if your running haret/win mob rather than nand
Click to expand...
Click to collapse
you think it could be that the problem is gone when I flash Android to nand?
so the only thing preventing me from flashing is the not working mobile internet. if that was working I would make android my every day operating system for the next time.
maybe i'll give flashing a try later if this solves the problem.
the only thing I'm not sure about is if I understood it right how to come back to my shipped rom.
I got the update from 6.0 to 6.1 from T-Mobile (mda-vario.exe), I started that one and copied all the files from Windows-Temp-folder to an other place. In this folder there is a RUU_signed.nbh, is this a full rom I can flash to go back to WM 6.1?
To get me right - I'm not asking how to do this - I just want to know if this file should be a full image that I can use as backup or if this is just an update-file.
I think it is always a full image, right?
(can't find german t-mobile rom in wiki - so I hope I can use this)

hi, I set APN and it works.
though it's quite unstable.
any ideas to improve it? thanks all.

another question.
I remembered I saw at somewhere about low disk space.
I installed some software and ran out of disk,yet I have a 16G micro sd.
how should I do with this? thanks.
I'll keep on searching.

dwmz said:
OT:
what I don't understand: what has WinMo to do with Android. Ok, it is installed in NAND, but I thought it is not running either?
Click to expand...
Click to collapse
Well I'm just repeating what I've heard. Since you run android using HAret from WINMO then the version of Winmo might have something to do with your problem.
But yeah go ahead and try NAND it might solve the issue.

dwmz said:
the only thing I'm not sure about is if I understood it right how to come back to my shipped rom.
I got the update from 6.0 to 6.1 from T-Mobile (mda-vario.exe), I started that one and copied all the files from Windows-Temp-folder to an other place. In this folder there is a RUU_signed.nbh, is this a full rom I can flash to go back to WM 6.1?
To get me right - I'm not asking how to do this - I just want to know if this file should be a full image that I can use as backup or if this is just an update-file.
I think it is always a full image, right?
(can't find german t-mobile rom in wiki - so I hope I can use this)
Click to expand...
Click to collapse
The rom files you copied may be just an update, however since it was a 6.0 to 6.1 upgrade I expect it'll be a full stock rom, one way to tell would be to place the NBH file on SD card, rename to KAISimg.nbh, enter bootloader, ( power+camera), and look at what it says it will update, a full update will include OS, RADIO, SPL and possibly SPLASH.
You do not need to continue the update, just pull the battery, or press dpad, it will cancel the flash, don't press the power button tho, because then it will flash it
Another rough guide would be file size, a full 6.1 rom is around 100MB or so.
If you choose to go Nand, remember to unlock your SIM pin before flashing, also make certain you have installed HardSPL, just in case

ok, I was hoping for an answer like 'you stupid noob, there are no update-roms, every rom is a full rom'
That would have made it much easier
But your answer was nearly as helpful, thank you zenity.
- filesize is 99MB (seems to be fine)
- it says it will update RADIO_V2, BOOTLOADER, SPLASH1, OS (should be all)
- in wiki the download-link for NL t-mobile-rom goes to the t-mobile-site. So I interpret the NL-rom to be a full one. So german could be a full one, too
To be sure I dumped my own device so I can try to reconstruct this to a nbh-file if the other rom won't work
- HardSPL is already installed (I flashed some radios before)
- SIM pin is already unlocked, too (didn't work with PIN for Haret so I had to unlock)
That's enough backing for me - otherwise I got a good reason to buy a new device
Thanks to all helping me up to this point.
I'll give NAND a try later this day and post some feedback.

ok, flashed it yesterday and mobile network works like a charm.
only thing is, menu item "Mobile Network" is still missing so I can't disable mobile network. but by using a widget for home screen I can en-/disable mobile network (without changing apn)
flashing was really easy - thanks to all doing such a great job in bringing Android to Kaiser.
Also thanks to all helping me in this thread.

hitakeane said:
hi, I set APN and it works.
though it's quite unstable.
any ideas to improve it? thanks all.
Click to expand...
Click to collapse
How you do that.?
Now,I can't connect to 3G Network.

[Q] No connection in Android with new build

Android was working perfectly ok with a 3G connection, but the new build isn't connecting. Any help? I didn't see anything in the FAQ.
I uninstalled the CAB from WinMo and deleted excess files off the microsd card.
Any idea on what's going on?

AVakil said:
Android was working perfectly ok with a 3G connection, but the new build isn't connecting. Any help? I didn't see anything in the FAQ.
I uninstalled the CAB from WinMo and deleted excess files off the microsd card.
Any idea on what's going on?
Click to expand...
Click to collapse
Is the force cdma option enabled in your startup? This only applies if you are on a CDMA carrier, obviously.
Also, don't use MGJDroidUtil... it has been known to screw up the startup.txt, I thought they were updating it tho... Haven't heard anything about it so just stay away from it...

Thanks for the tip regarding not using the launcher. I have noticed that startup.txt getting corrupted.
The force CDMA is enabled in my startup. I am on Sprint.

same....
I have the same problem. Force CDMA is checked. The BLAZN and default releases were my first attempt at this when audio support was added. Both of those tested and worked as expected. So that's two of us so far.
BTW I told myself I'd donate once some great minds got audio working. Is it best to donate on the main page or to any other specific party?

lip008 said:
I have the same problem. Force CDMA is checked. The BLAZN and default releases were my first attempt at this when audio support was added. Both of those tested and worked as expected. So that's two of us so far.
BTW I told myself I'd donate once some great minds got audio working. Is it best to donate on the main page or to any other specific party?
Click to expand...
Click to collapse
AVakil said:
Thanks for the tip regarding not using the launcher. I have noticed that startup.txt getting corrupted.
The force CDMA is enabled in my startup. I am on Sprint.
Click to expand...
Click to collapse
To both of you... you may want to format & start over. lip008, you said "force cdma is checked" - that sounds like you're using MGJDroidUtil, because the startup.txt is a text file... you have to make sure the force cdma command is in the cmdline section.
Oh and for donations, I'd say the general XDAndroid Donation page is sufficient

I'm on GSM (T-Mobile), and I had the same issue (not the BLAZN build, the regular one)

Ok, how about APN settings? sukru, others, have you checked those?
Honestly I haven't had to add the APN manually for several builds, but maybe there's a regression in the new build.
As always, make sure your rootfs, zImage/modules are up to date.

Heres the solution if you are on sprint
Boot into windows mobile and connect to pc so you can access the files in the andboot folder on your sd card. .
or (the purpose of this is so you can edit your STARTUP.TXT using notepad)
You can take out your SD CARD and put it in a card reader and do this too.. as long as you are in windows mobile..
DO NOT DO THIS IN ANDROID..
Once you get access to the SD CARD files.. go into the ANDBOOT folder..
locate STARTUP.TXT and edit it with notepad
locate the long line of commands that starts with "Set cmdline"....
read the entire line and somewhere in the middle you will find a part that says..
force_cdma=0 (remove this part only)
and make sure you have this at the end.... htc_hw.force_cdma=1
NEXT: SAVE YOUR FILE.. AND HERES THE IMPORTANT PART..
***** BOOT WITH HARET.EXE***** NOT WITH THE MGJDroidUtil program...
THIS WORKED FOR ME.. and if any of the mods here want to add to this.. please feel free to clarify..

In lamens terms... On cdma network sprint only
THERE IS A CORRUPT ENTRY IN THE STARTUP.TXT that needs to be removed..
EDIT this entry using notepad while not booted up in android.
the entry needs to be removed mentioned above..
DO NOT USE: MGJDroidUtil to start android.. USE FILE EXPLORER.. AND start
HARET.EXE..
hope this helps..
MINE READS AS FOLLOWS:
set cmdline "lcd.density=240 msmts_calib=0x9f.0x39a.0x35c.0x78 7x00.a11=500 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=2,1,3 pm.sleep_mode=2 acpuclock.oc_freq_khz=716800 rel_path=andboot hw3d.force=1 physkeyboard=rhod400 htc_hw.force_cdma=1 "

lancevs, I appreciate then enthusiasm, but I don't think that would have any effect on GSM guys.
However, using MGJDroidUtil can still screw up anybody's startup.txt, regardless of the type of phone/radio... so he is correct in that fact:
DON'T USE MGJDROIDUTIL.EXE!!!!
Edit - didn't even think about it but sukru - do you have this force_cdma statement set to 1? For us CDMA guys it's required, but it probably will break you GSM guys if it is enabled... So check that out.

Yes for clarification
MY POST SAYS " FOR SPRINT USERS ONLY" at the TITLE...
GSM users, this does not apply..
I am on sprint and spent a good part of yesterday trying to figure out why i had no service.. I am on SPRINT which is a CDMA network..

arrrghhh said:
lancevs, I appreciate then enthusiasm, but I don't think that would have any effect on GSM guys.
However, using MGJDroidUtil can still screw up anybody's startup.txt, regardless of the type of phone/radio... so he is correct in that fact:
DON'T USE MGJDROIDUTIL.EXE!!!!
Edit - didn't even think about it but sukru - do you have this force_cdma statement set to 1? For us CDMA guys it's required, but it probably will break you GSM guys if it is enabled... So check that out.
Click to expand...
Click to collapse
Will check again tonight. Android was getting better each time, then it suddenly went down for me.

Hey guys. I had been running an early August (pre sound) release of Blazn, and everything had been fine. Today I decided to upgrade to get sound and 3D support, and every time I boot into Android it shows no signal, and shows I'm in airplane mode, and it will not let me turn the radio on.
I'm using a Sprint TP2, and I followed the instructions for earlier in the thread, but still no go.
Here's the line from my config file:
Code:
lcd.density=240 msmts_calib=0x9f.0x39a.0x35c.0x78 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=2,1,3 pm.sleep_mode=2 acpuclock.oc_freq_khz=716800 hw3d.force=1 physkeyboard=rhod400 htc_hw.force_cdma=1
Is there something wrong in it? I am launching Haret directly from TotalCommander File Explorer. Same problem if I use the config/startup utility.
Also, to install the latest version, I deleted the andboot and android folders on my SD card, then installed via cab.

That line looks correct, perhaps you should post your entire startup.txt.
Or just start with a clean build - wipe everything Android related and do a fresh install. The new startup utility is pretty slick, just be sure you check force cdma in the advanced section.

Seems to be random. About 30% of the time it will work, the other 70% of the time "no service" and no way to turn on the radio.

shawndoc said:
Seems to be random. About 30% of the time it will work, the other 70% of the time "no service" and no way to turn on the radio.
Click to expand...
Click to collapse
Well, perhaps you shouldn't use the update utility at all. It has been updated so it shouldn't corrupt the startup.txt, but I had issues with it... so personally I prefer to just use haret & modify the startup.txt manually.

I am launching Haret directly, see OG post.

shawndoc said:
I am launching Haret directly, see OG post.
Click to expand...
Click to collapse
Start with a clean build. Don't touch the startup utility, because you said you had previously. It's been known to corrupt the startup.txt, even these new builds I had my startup.txt go to 0 bytes.

hi I am having the same problems cant get android to connect with sprint on the tp2. I am no expert but have become very good at using windows mobile as a user not a developer so all i know is i downloaded a cab file that was haret version 9 28 it came with a little icon labeled android project when i launch it i get to a screen that lets me make some advanced setting and check for updates before and choose my phone model. It says aka sovereinty at the bottom. I have tried to boot without forcing cdma and it does not connect and when i choose force cdma it seems likes its kinda connecting but keeps getting a error message and then i force close and it automatically tries again. If i boot wiithout force cdma the i can connect via wifi but that works but seems to also disconnect after a few minutes, though that is not my concern for now. I tried with the sim and without. and have updated twice so i am know on 10 4. anybody that get help would be appreciated. I love my tp2 with windows mobile but am curuios to play with android being that sprint wont let me unless i change my plan and make me pay double. not interested because my tp2 works great now and has everything i need.
thanks

Sprint TP2 Wifi does not work - pls help!

Windows Mobile: 6.5
XDAndroid: Rhod400
Installed Version: 2010_11_24
(Installed ProjectAndroid2.2BLAZN.092810 and ran update 2010_11_24)
Wifi works on WM but not on Android
Can turn on Wifi but Wifi goes off immediately.
Error message:
Sorry!
Application Settings (in process com.android.settings) is not responding.
I have my Haret.exe in andboot.
Thanks for your help in advance.

martian63 said:
Windows Mobile: 6.5
XDAndroid: Rhod400
Installed Version: 2010_11_24
(Installed ProjectAndroid2.2BLAZN.092810 and ran update 2010_11_24)
Wifi works on WM but not on Android
Can turn on Wifi but Wifi goes off immediately.
Error message:
Sorry!
Application Settings (in process com.android.settings) is not responding.
I have my Haret.exe in andboot.
Thanks for your help in advance.
Click to expand...
Click to collapse
1) do not overclock
2) do not tamper with the phone immediately after boot, leave it alone for a while (30 secs, 1 min)
3) do not fill the desktop with widgets, they eat lots of resources
If none of these works, while still NOT overclocking, delete data.img file inside andboot folder and start from scratch.
Cheers.

Pretty strange, since I have a Sprint TP2 and Wifi works perfectly.
You might want to start by renaming your data.img to something else to back it up, and then starting up. If after you boot Wifi works, then you know something is messed up in your data.img. Otherwise, you know it's something else and you don't need to wipe out your data.img.

Wifi can also easily get bungled if you update your kernel and don't update your modules file.
The kernel (zImage) and modules (modules-xxxx.tar.gz) go hand-in-hand, and they MUST be updated together.

1. Formatted SD Card with HP USB Disk Storage Format Tool
2. Deleted exchange inbox folder in SD Card (I have no idea why the formatting does not wipe it clean)
3. copied ProjectAndroid2.2Froyo.112210.cab to root of SD Card
4. Ran cab from explorer
Ran ProjectAndroid from WM
Ran Update
RHOD400
Cdma x
HW3D X
N AM DIAL X
Getting the following message:
Unable to scan for networks
WPA Wifi is on in WM
I renamed the data.img file... still does not work

manekineko said:
Pretty strange, since I have a Sprint TP2 and Wifi works perfectly.
You might want to start by renaming your data.img to something else to back it up, and then starting up. If after you boot Wifi works, then you know something is messed up in your data.img. Otherwise, you know it's something else and you don't need to wipe out your data.img.
Click to expand...
Click to collapse
Could you please post the link to the build you used? I used
sites.google.com/site/androidport/downloads
Thanks!

martian63 said:
Could you please post the link to the build you used? I used
sites.google.com/site/androidport/downloads
Thanks!
Click to expand...
Click to collapse
That is the one I use on my sprint tp2. Works awesome. I can even wifi tether. Did you download the one at the bottom of the page from Nov. 22?
Edit: sorry. just saw you gave that info. I have never tried that N american dialer. not sure what it does. do you still get the same error when you try to turn on wifi in settings?

ivwonka said:
That is the one I use on my sprint tp2. Works awesome. I can even wifi tether. Did you download the one at the bottom of the page from Nov. 22?
Edit: sorry. just saw you gave that info. I have never tried that N american dialer. not sure what it does. do you still get the same error when you try to turn on wifi in settings?
Click to expand...
Click to collapse
I hard booted my TP2 to factory settings, used the .rar files instead of the .cab...
getting the same message "Unable to scan for networks".
Yes, I am getting the same error when I try to turn on wifi in settings.
The instructions in xda is a bit misleading for .rar
The steps say
1. Unzip
2. Copy contents of .Rar to the ROOT of your SD card
When you unzip, the content is in folder "XDAndroid2.2Froyo.112210" sub-folder "XDAndroid2.2Froyo.XXxxXX"
The instruction should say, "Copy contents of "XDAndroid2.2Froyo.XXxxXX" to the root of SD card.
Please correct me if I am wrong. In any case, my wifi still does not work.

Have you tried updating manually? Also, you should get an 'andboot' folder if you go into that XXxxXX folder.
I also found a mistake with Reef's build... I asked him to update it. Basically he's not using a signed FRX03 image... I sent him a new bundle, doesn't look like he's updated it yet tho...
What I'd recommend in the meantime is to update this build manually. Download a new system.ext2, new kernel (zImage/modules - they go together!) and rootfs.
You can find all of those updates at http://xdandroid.com/wiki/Main_Page

arrrghhh said:
Have you tried updating manually? Also, you should get an 'andboot' folder if you go into that XXxxXX folder.
I also found a mistake with Reef's build... I asked him to update it. Basically he's not using a signed FRX03 image... I sent him a new bundle, doesn't look like he's updated it yet tho...
What I'd recommend in the meantime is to update this build manually. Download a new system.ext2, new kernel (zImage/modules - they go together!) and rootfs.
You can find all of those updates at //xdandroid.com/wiki/Main_Page
Click to expand...
Click to collapse
Downloaded the latest files individually. Updated the build manually by replacing the system.ext2, zImage/modules and rootfs. Modified the startup.txt to force cdma, keyboard to rhod400 and clock speed to 540672... getting the same error "Unable to scan for networks" error.

ivwonka said:
That is the one I use on my sprint tp2. Works awesome. I can even wifi tether. Did you download the one at the bottom of the page from Nov. 22?
Edit: sorry. just saw you gave that info. I have never tried that N american dialer. not sure what it does. do you still get the same error when you try to turn on wifi in settings?
Click to expand...
Click to collapse
Can you please post the contents of your startup.txt?
Thanks!

[Q] RAPH120 Startup

Hello ,i have a problem ,i have raph120 device ,and i want to get android on it ,i download the FRX06 ,up it on my sd, and give it startup from the folder ,i try any startups from folder in this bundle ,and it doesn't work with any... :/
is there a way to get this android on my phone? ,it's a special startup for raph120 ? there isn't startup's for 120 in the folders of this bundle.
i will be greatfull for any help
cheers
edit: when i try to bot it ,always i get "mdp_dma: busy" message... :/

I've never heard of a RAPH120 - are you sure that's on the phone, not the battery?
Have you done the ts-calib either manually or by using the one I've attached?

Please do check behind the battery on the back of the device. You should see the imei bar code and just above that you should see four letters followed by three numbers. Do let us know what you see, my friend

yeah ,behind battery i find "RAPH120" the phone named XDA from O2 network.
finally i run the FRX05 version ,but i get some freezes ,and device is stucked
this is my startup
set ramsize 0x10000000
set ramaddr 0x10000000
set mtype 1910
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=FRX05 lcd.density=210 msmvkeyb_toggle=off gsensor_axis=-1,-2,3 board-htcraphael-navi.wake=0 pm.sleep_mode=1 physkeyboard=german_raph msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave"
boot
Click to expand...
Click to collapse
any help?

how long did u wait for booting?
and whats the others message before "mdp_dma: busy" you see?

raph100-US GSM
raph110-AT&T Fuze
raph800-CDMA
raph500-CDMA verizon

All I can see is a few depreciated commands. At best, you'll need to try using the RAPH100 or RAP110 startup.txt files found in THIS bundle. As a matter of fact, you might want to try formatting with something other than windows and be sure to grab THIS ts-calibration file as well, my friend! You will need to extract the file and place it where the file called haret.exe is.

I have a RAPH120, and I posted my startup here: http://forum.xda-developers.com/showpost.php?p=11974903&postcount=9
FRX05 is running fine with this startup.

martpk said:
yeah ,behind battery i find "RAPH120" the phone named XDA from O2 network.
finally i run the FRX05 version ,but i get some freezes ,and device is stucked
this is my startup
any help?
Click to expand...
Click to collapse
You do have a lot of weird options in your startup.txt, read the comments above, they're all spot on (thanks guys ).
As for the freezing, there's a potential fix to the freezes on the first boot. See this thread.

finally i had xdandroid frx06 on my phone ,and its work great ,sometime had a little freezes ,but im happy for it ,thanks for help guys!

XDAndroid FRX06 + RHOD500 + HTC Touch Pro II = Stuck in airplane mode

I got FRX06 loaded on a microSD, configured with RHOD500, popped it in the HTC Touch Pro II (Sprint), and all was happy the first time. Made a phone call from XDAndroid, all was going good.
Subsequent runs, XDAndroid is stuck in airplane mode. To resolve, I've tried:
1) Turning airplane mode off in settings. Every time I go back, I find airplane mode turned on again.
2) Seeing if in Windows, airplane mode is turned on. It is not.
3) Starting from scratch and replacing everything on the microSD card from the original FRX06 contents / download. Booted up, went through install again, after install, ended up in airplane mode again.
Any ideas? What was done for XDAndroid is sweet, I wanna show the franken-phone!

im having the same issue.. Same Setup as you.. Not sure why it does that... makes a noise then just staying in airplane mode

same problem here
i user FRX06 version to and problem not solved

Set "force_cdma=1" in your startup.txt file

x12CHRIS18x said:
Set "force_cdma=1" in your startup.txt file
Click to expand...
Click to collapse
I'm having a similar issue as above. I'm using an HTC TP2 from Verizon but using it on ATTs GSM network. I setup with FRX07 and all worked fine. I decided to try using GBX0A and it won't come out of Airplane mode. It just sticks at "Enabling Wireless Connections..." I tried both with force_CDMA=1 and =0. Neither worked. The FRX07 build has it with the =1 in it and that worked there.

Hey, I was able to get the phone working (although I did too much at once and messed some other things up) But here's what I had just tried.
I had just tried the FRX07.1 build and decided to try again with this as well. I grabbed (on someone else's recommendation) my old rootfs, zImage and data.img files and copied them over into the GB folder. This worked for getting the phone up and running, but wifi and google account sync aren't working now. I think perhaps I should have done this one step at a time. I'll try playing with this some more later, but if I were you I'd try starting with a rootfs file from another build that works if you have one.
If I figure out anything solid, I'll try to remember to come back with an update for you.