Hello,
I would like to flash the new SPL that comes with the new official HTC Rom (with sense 2.5) as it may be related to the sleep of death (which seems to occure on low batterie only for me).
HardSPL does not allow the flash of the SPL, and SSPL freeze my device. Any idea?
As my device is a german one and that I want the rom in english I do need to bypass the vendor id check.
Thank you,
if youre using hardspl and a custom rom, do not flash a stock spl. youll brick your phone. if you have hardspl flashed, you shouldnt flash to stock. if youre using the stock rom it should have also flashed its matching stock spl.
Related
Hi,
I am new here... and i would like to know all the proccess from the begining
what i need to download and how do i install it.
Thanks
Welcome, please start by reading: http://www.trinityguides.info
I have read this... but i didnt understand what is radioupgrade and what i need to do... i can just upgrade one of wm6 that in this forum from the minisd?
or that i need radio upgrade or something
And what is Hard-SPL
radio is the gsm part it have it's own software which is not included in the normal wm rom
if your gsm is working ok you dont need to upgrade
Hard-SPL ==
http://www.google.com/search?source=ig&hl=en&q=Hard-SPL&btnG=Google+Search&lr=lang_da|lang_en
gallevy said:
I have read this... but i didnt understand what is radioupgrade and what i need to do... i can just upgrade one of wm6 that in this forum from the minisd?
or that i need radio upgrade or something
And what is Hard-SPL
Click to expand...
Click to collapse
SPL - Service Providor Lock. Your phone has a SPL in place to prevent you from flashing a ROM from another providor for example. By Flashing Hard-SPL - you permanently remove the SPL check when flashing a ROM thereby allowing you to flash any ROM that is designed for your device.
You can use Soft-SPL which will prevent the check from happening when you flash on a once only basis. If you have a problem during the upgrade - the ONLY way to recover you phone is by flashing the original ROM. Therefore if you don't have the original ROM to hand - Hard-SPL is highly recommended! It allows you to flash another ROM if you have a problem during a flash - thereby recovering your device.
Hello,
So much time in the forum and i still didn't get this part properly:
I have used USPL for the Artemis, and i have been flashing some ROMs with no issues at all. My problem is that i want to try out an official WM6 ROM:
HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R
And i know this will overwrite my SPL once again. I currently have SPL 1.11.0000 (so it is CID unlocked).
Can i flash this ROM safely without bricking the Artemis? (silly question but better safe than sorry). I know that if my SPL gets overwritten i have to USPL once again in order to flash cooked roms, this part i got
Basically what i need to know is if USPL will make the Artemis flashable with ANY type of ROM (cooked, official, etc).
Thanks for any help.
yep, uspl will allow officail/cooked roms
tried flashing official rom with out uspl and my ppc was showing SPL 1.11.0000 from before, it wouldn't flash even though it was the official rom.
flashed with uspl and all was fine
Okay thank you
hey dude - did you read the uspl manual by POF
the uspl tool for artemis temporarily add files to the phone RAM so that it will allow any rom to be flashed! once the phone is immediatly soft-reseted after running the uspl utility the uspl files will be deleted (from the ram i think) and it will be protected again (locked again) the uspl tool by pof does not change the ispl it just create kind of a backdoor way! (my analogy)
from experience a hard reset is alway beneficial and necessary from my point of view after flashing roms
also soft rest is useful before running the uspl - u need ram
best wishes and happy flashing - we are flashing addicts here thanks to pof
jahrami:- not true, start_uspl thru cewrite.exe adds some files to allow Ruu to flash USPL (SPL:1.11.0000) after flashing spl is finished(correctly) U can do as many HARD/Soft resets as u want to. U can flash whatever U want as many times U want to. But u need to take care if its not SHIP rom (they flash SPL as well) While u'll use only cooked roms, u can sleep in peace. Best way is to check SPL version always before flashing.
phsnake said:
jahrami:- not true, start_uspl thru cewrite.exe adds some files to allow Ruu to flash USPL (SPL:1.11.0000) after flashing spl is finished(correctly) U can do as many HARD/Soft resets as u want to. U can flash whatever U want as many times U want to. But u need to take care if its not SHIP rom (they flash SPL as well) While u'll use only cooked roms, u can sleep in peace. Best way is to check SPL version always before flashing.
Click to expand...
Click to collapse
Hi phsnake
When you use uspl does it change the spl version??
read the notes 2-6 in the uspl manual
2 says the uspl does not change imei we all agree
3 says says the uspl it does not correct cid (country id) area yeah
4 says the uspl TEMPORARILY unclock the device
5 says the uspl AFTER FLASHING the phone is set back to factory settings
dear phsnake ppl were running uspl, soft reseting their phones, then try to flash a rom (they reported that flashing did not work) so it seems that files extracted by uspl go into a temporarily memory would you say its the rom or ram?
i just offered my understanding to what i've read i am not as intelligent as pof - i am just an ordinary member i am even not senior
best wishes
The USPL is permanent unless it is overwritten by another FULL flash (including SPL). If you just flash the OS, GSM, EXT_ROM or SPLASH parts, it'll be there forever.
I tried flashing an official ROM after USPL and it still said the device didn't have the characteristics for the ROM or whatever, so i extracted OS.nb, flashed it, and it worked like a charm.
For as long as you have SPL 1.11.0000 (forever if you don't overwrite it) you can flash away as you like.
Dear All,
first of all....HELLO! I've just registered myself on the forum.
Yesterday I bought the HTC P3600 (Trinity, I think), english version (I suppose it's called wwe). I want to install a cooked ITALIAN ROM, but I read I'm losing the guarantee if I'll do it.
Somebody tell me there is a software that can allow me to re-install the original ROM and avoid the guarantee losing.
Is this right? can someone give me more info?
Thanks in advance for your reply and sorry for my english
Best regards
You can always go back to an original HTC rom, as long as you don't brick your device.
In order to prevent that, you should install a Hard-SPL (board search, iirc its a sticky) which is a replacement bootloader that allows flashing any Rom after bricking.
Have fun playing around with your new P3600.
ZakMcRofl said:
You can always go back to an original HTC rom, as long as you don't brick your device.
In order to prevent that, you should install a Hard-SPL (board search, iirc its a sticky) which is a replacement bootloader that allows flashing any Rom after bricking.
Have fun playing around with your new P3600.
Click to expand...
Click to collapse
So if I install first the Hard-SPL I can install a COOKED ITALIAN ROM and after I can go back the original HTC ROM and I'll not lose my guarantee???
If I brick, how can I de-brick the HTC?
Thanks for the quickly reply
Best regards
You should try reading the WIKI and also check www.trinityguides.info
Helloo there.
Your phone is probably cid locked, that means, that u can install only original htc rom-wm5. wm6 doesnt exist for htc trinity.
If u have cid unlocked, u can flash any rom with the RUU (rom update utility) , which is in the package with the rom.
Otherwise i prefer for my cid locked trinity that:
http://forum.xda-developers.com/showthread.php?t=293632
U loose warranty if u send the broken pda on service with the custom rom installed on it. So, before u send it, flash the original rom over and it will be ok.
The problem could be, if the lcd goes bad, than its hard to reinstall the original rom. i know u understand.
badguy999 said:
Helloo there.
Your phone is probably cid locked, that means, that u can install only original htc rom-wm5. wm6 doesnt exist for htc trinity.
If u have cid unlocked, u can flash any rom with the RUU (rom update utility) , which is in the package with the rom.
Otherwise i prefer for my cid locked trinity that:
http://forum.xda-developers.com/showthread.php?t=293632
U loose warranty if u send the broken pda on service with the custom rom installed on it. So, before u send it, flash the original rom over and it will be ok.
The problem could be, if the lcd goes bad, than its hard to reinstall the original rom. i know u understand.
Click to expand...
Click to collapse
Thanks for your answer. I installed the SPL-1.20 and I updated my Radio version (1.46.00.11------is it good?). Now I can install every unofficial ROM and in any case I can go back (how?).
Is it right?
Best regards
hi guys,
same as title,
may I ask how to rolling back diamond custom rom into HTC original rom? just for warranty reasons.
after referring someone's thread, I found that first I should re-cook a standard rom into my diamond, then flash the proper radio, and finally recover SPL before sending it to HTC.
now I know how to flash radio/SPL back, then how about rom?
sorry for my poor English, once again, my point is, back up my current rom(with factory default settings), then flash a custom rom to replace this current rom, and re-flash that factory default setting rom back when diamond get some hardware problems which means need to be send to HTC service in the future.
First flash the original ROM (like any cooked ROM),
then the radio, and the origi SPL.
It's simple as that.
I'm a new diamond (DIAM100) user and i'm having so many doubts about flashing a new custom ROM and all related to HardSPL and stuff.
This is my 3rd PPC and i've been flashing custom rom's for years in my Polaris (i've even cooked some myself) and it was very simple.
Now for Diamond, there's so many HardSpls, each with so many pros and cons that it's so very confusing. I've been reeding this forum for a week and i haven's still cleared up my mind.
So i would appreciate a little help from more experienced users.
Here's the deal: My Diamond (my father in law gave it to me as he doesn't use it any more and my Polaris has become very instable) shows this at bootloader:
DIAM100 64M
SPL-2.03.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
It has the last oficial portuguese rom (2.03) and radio 1.09.
In the forum i've found olinex's SPL but its only 1.93. - (Q1) Can i flash this SPL and so unlock the device, flash a new custom rom and then flash back the original 2.03 SPL, thus locking it again?
(Q2) To update the radio to a new version is there any special requirments?
(Q3) Would aprecciate if any diamond experienced user posted some help on How-To upgrade my diamond based on his self experience and point me to the right tools.
TIA
Lets start...
Okay. So flashing a Diamond for the first time with a new HSPL and ROM is pretty confusing at start. But when you get the hang of it, you would know this cudnt have been easier...
This tutorial is based on my experience and on actual procedure. Still, you can take a look around this tutorial as well. Click here
This tutorial is divided in 3 main parts.
1. Flashing the HSPL 1.93
HSPL 1.93 is by far the best HSPL you will ever get. Most of the ROM chefs in their prerequisite have also recommended HSPL 1.93. If you find this hard to believe, see for yourself in the Diamond ROM development section.
Okay. So download is HERE For details abt this HSPL read from this link http://forum.xda-developers.com/showthread.php?t=400950
a) Put your device into Bootloader mode.
b) Flash away using the RUU
Now you have got HSPL, why the H, because it stands for HARD, means now if you load your official ROM 2.03, this HSPL will not be overwritten.
And believe me, i have flashed HSPL 1.93 and using the official ROM 1.93 WWE along with it.
AND i have NOT faced ANY problems at all
Plus! There seems to be a screen flciker problem with SPL 1.40. So dont flash HSPL 1.40. I can guarantee from my usage 1.93 is the best.
Moving ON!
2) Flashing a CUSTOM ROM (Need to do mtty)
a) Now see, this is the part where the initial headache comes. Cos every cook recommends that you do a mtty format on your Diamond before you flash their custom ROMs. What the hell is mtty and why do you need it so badly.
Answer: Suppose you dont care abt mtty and you flash a Custom ROM. Then you experience sudden freezes on your device and even a few resets also. And even before that gets started, You might not be able to flash the Custom ROM at all, because somehow the flashing gets stuck at maybe 3% or X%
Is the Chef to Blame? Nope! This is where mtty solution Jumps in.
So the next step is to read and format your device with mtty. READ HERE THOROUGHLY and FOLLOW THE METHOD MENTIONED Depending on your Computer Operating System!
b) MTTY DUDE RIGHT HERE
3) FINALLY, time for a CUSTOM ROM!
Oh! SO you done with mtty and reading this part eh? Well what are ya waiting for.
Since you formatted your device using mtty, keep your device in Bootloader mode
a) NOW flash any custom ROM which you want to flash.
b) AND if you want to flash another custom ROM again, you have to do mtty again
WHY?
Because Custom ROMS vary in size and take different sizes on the flashable part of your Diamond. When the current rom which you want to flash is smaller than the existing ROM in your Diamond, this can cause some problems. This is the reason you needed to do mtty in second step above.
And even if the case was vice versa in the matter of size, i would recommend doing mtty.
NOW Answers to your questions!
UNLOCKING and RELOCKING
Q1) Ofcoz! Indeed! Once you flash a Custom via the USE of an HSPL, you can revert back to your locked SPL. Havent caught the sight of a SPL 2.03 available here. But still this forum is full of suprising stuffs. So look around..
SO if you are reverting back to a locked SPL, then after flashing of your custom ROM is DONE! you will need these to erase away the HSPL, which wud not go even if you do an a flash from your official ROM. Because it is protected. SO read a similar case presented in this post http://forum.xda-developers.com/showthread.php?t=504675 and download the attachment in the 3rd POST. (I recommend this link and attachment than the link i am providing below)
Also a similar post abt returning to stock SPL is here http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39
If you are following the second scenario, in the case of Stock SPL 1.93 you wud need stock SPL 2.03
RADIO
Q2) There is no special requirement apart from unlocking your device with an HSPL. Once you complete the HSPL (Unlocking section) you are done! You can flash any number of RADIO and Custom ROMs which you want to check. Just remember to give your Diamond a lil rest. And Oh! one Radio and Custom rom at a time.
Q3) I hope most of your doubts have been cleared and you are confident to flash now.
Still if you need any help please post back or PM me. I may not reply soon, but still i would come around every 6-9 hours. Oh yeah i m a student!
Thanks for the reply, very complete and useful and a confirmation to what i was thinking. Thank you again.
I did find a 2.03 SPL in http://forum.xda-developers.com/showpost.php?p=3359191&postcount=390 and i've dumped my own as per http://forum.xda-developers.com/showpost.php?p=2460876&postcount=3. Just don't know if it is the correct adress to 2.03 SPL.
Anyhow here's what i'm thinking:
1- Flash olinex 1.93 HardSLP
2- Flash custom ROM
3- Flash 2.03SPL back
Well the 3rd step may not be immediatly after step 2. I may want to try som other roms. But from what i've read it's best to have the latest SPL on your device.
By the way, what 6.5 rom's with bottom start button keep the same functions as the stock Diamond rom as when one pulls the stylus out while on a call it'll open notes, mute the ring when faced down, etc.
On call - stylus out - notes open is basically a feature available with the type of Phone Canvas version in the rom. You can try any of the below threads to get a suitable rom. These are the ones i have tried so far. There are some more 6.5 ROMs available also.
http://forum.xda-developers.com/showthread.php?t=611011
http://forum.xda-developers.com/showthread.php?t=765247
http://forum.xda-developers.com/showthread.php?t=517300
I think the mute option can be enabled by changing a registry value in the diamond, because it is dependent on g-sensor and light sensor, and irrespective of the ROM.
Good that you found my guide useful. I just checked that link for 2.03 SPL. Appears valid. Only when you try you will know. And yep what you say is correct. I also go with the latest updates. But somethings are really good i just get stuck with them, like my 1.93
Today i jus cooked a rom from my 1.93 stock. Removed some stuffs like customer feedback, error reporting and disabled security on installation of unsigned cabs.
I may post it online along with link to kitchen. The kitchen is very basic and so simple, i cooked my rom in 5-10mins max