Hello,
I have wm6 CE OS 5.2.1938 Build 18538.0.7.0 PV from pdaviet, radio version 1.13 and I have a radio issue: I cannot start wifi and BT in the same time from connection manager. If I want to start wi-fi for example - I have to start it from wlan settings/turn on wlan. If then I go in manager to start BT, it won't start, only shows the round thing for waiting but notthing happens, the BT doesn't start.
If I want to start BT, I have to tap BT in manager and when I see the round thing for waiting, I give a restart and it restarts with BT on and the BT works but than there is no way to start wifi.
Any ideeas? This is quite anoing....pls help
Thanks
the issue with switching on wi-fi is widely known and happens to all of us.
the bluetooth issue is something else.
maybe you messed something up. you could try a hard reset. in case, that problem first appeared after you flashed the pdaviet rom, you could try another rom and/or radio rom from this thread: http://forum.xda-developers.com/showthread.php?t=630416
radio
After some searching I saw that BT is linked with run_bttray process wich I dont find in start up, neither in windows dirrectory. My radio version is 1.13 on wm6. Where should I check to see if bttray is present? How can I start it? Can you provide an aplication wich I can run to control BT?
Thanks for your help
cmd77 said:
Hello,
I have wm6 CE OS 5.2.1938 Build 18538.0.7.0 PV from pdaviet, radio version 1.13 and I have a radio issue: I cannot start wifi and BT in the same time from connection manager. If I want to start wi-fi for example - I have to start it from wlan settings/turn on wlan. If then I go in manager to start BT, it won't start, only shows the round thing for waiting but notthing happens, the BT doesn't start.
If I want to start BT, I have to tap BT in manager and when I see the round thing for waiting, I give a restart and it restarts with BT on and the BT works but than there is no way to start wifi.
Any ideeas? This is quite anoing....pls help
Thanks
Click to expand...
Click to collapse
Switch to a newer rom. I believe that this BT issue was present in older versions of WM.
same problem
hi!
i have the same problem.
But I know that it's software related.
People always tell me, they can't hear me well, and that parts of words are suppressed.
I tried with AGC ON and OFF and tried the impact on the voice recorder.
The voice recorder is influenced by the settings and I could hear a clearly distinguishable difference.
Loud and clear record with AGC on. Damp, attenuated record with AGC off.
The problem is, that the AGC settings seem not to influence the microphone level of the phone-calls.
Is there a solution?
I use WM 6,5,21888 German made by D-Two
Related
Every now and again when i make a call it connects fine but the speaker and microphone does not work (which kind of makes call difficult). A soft reset fixes it every time. It seems to happen after i have switched BT off and use the pda wihtou a headset.
I have a standard m2000 orange build with no additional software installed
Also if anyone has any sw upgrade suggestions for the build below pls let me know.
Operator version 5.31.1.124
ROM 1.31.00 WWE
Radio Ver 1.06.02
Protocol 1337.38
Ext ROM 1.31.124 WWE
I have exactly the same problem with ROM 1.40.00 and Bluetooth.... I was informed it was due to SPB Pocket Plus which I use but as you are having the same problem with no additional software I can only guess it is a version of the Bluetooth stack that causes it instead.
I am searching for an answer and will post one here if I get one (Such as a newer stack etc) and will monitor this thread as well to see if anyone else has the answers!
A much easier and faster option is to turn the Bluetooth on and then off, I know it sound bizzare but it does work, as a mater of fact I now use the bluetooth headset on the way to work and on the way home, this "appears" to have stopped the problem - this involves turning BT on / of etc but once I started doing this no more "absent" callers - Mike
This definitely does NOT work for my problem, in fact the switching on then off of Bluetooth is exactly what triggers the problem!
Hi there I'am new here.... seached the forum and google a lot but didn't find an answer...
Just flashed from XDALive 2.0 to Black 2.0, radio 1.38.00.10 and HardSPL v6 with help of the manual of mrvanx.
My problem with the rom of XDALive 2.0 was that TomTom 6 keep hanging serveral time. The headset (bluetooth build in CAR, peugeot 207) was working perfectly. After the upgrade to Black 2.0 the TomTom problem was solved , it works perfectly now. The only what came up was the bluetooth headset probleem. The connection is ok but I don't hear any sound??
Flashed back radio ROM to 1.35 no results...
Found something interesting...
When its not connect with the carkit, turn on bluetooth, dail a numbers and turn on the Speaker, it will eventually connect to the carkit automaticly (and I got sound thourgh the carkit!
When searching for bluetooth devices it will find the headset and the carkit goes into 'calling mode'. When dailing a contact directly after that the carkit will work. But the next try it will mute the radio but doesn't give any sound on the carkit.
When allready connected with bluetooth on the carkit it wont give any sound thourgh it.... strange.. Tried serveral other ROMS but they are giving me the same problem...
Widcomm BT Stack (http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72) also tried, didn't help... anyone some suggestions?
PS.: My old nokia still works, it can't be the carkit..
Question for you. after you setup your carkit do you go into the bluetooth and set it to your handsfree device. There seams to be a few changes to the way WM6 chooses the handsfree device if you have several set up.
I have to change in WM6 bluetooth which headset I am using when I switch between the 3 headset I have. I have to go to Start\Settings\Connections\Bluetooth Click/Hold on my headset that I want to make active - you will get a Menu wit Edit/Delete/Set as Hands-free/Set as Wireless Stereo (last should be grayed out if it doesn't support Strereo)
Choose Set as Hands-free
After doing this my headset works fine. Try it and see if it works for you.
jcb_home said:
Question for you. after you setup your carkit do you go into the bluetooth and set it to your handsfree device. There seams to be a few changes to the way WM6 chooses the handsfree device if you have several set up.
I have to change in WM6 bluetooth which headset I am using when I switch between the 3 headset I have. I have to go to Start\Settings\Connections\Bluetooth Click/Hold on my headset that I want to make active - you will get a Menu wit Edit/Delete/Set as Hands-free/Set as Wireless Stereo (last should be grayed out if it doesn't support Strereo)
Choose Set as Hands-free
After doing this my headset works fine. Try it and see if it works for you.
Click to expand...
Click to collapse
When searching for a new bluetooth device WM6 sees a headset and the connection is successful. The 'Set has headset' is availible and is set. The option Wireless Stereo isn't support I think, its not availible as an option.
When calling you can turn on/off your headset back to the phone. That works but there is still no sound on the headset.
balck 2.0 does have issues. i also have same with motorola hs850.
only just found out. havent fixed.
bt connects as phone pad shows it.
headset bleeps on connect call and disconnect call. but no sound is sent or received.
always set to headset though not hands free.
will have to test further but definitely an issue. i didnt ask jj out of respect for his withdrawl of support.
I don't think it a problem with Black 2.0. Too many people say it works no problem.
I'm on black and all three of my head sets work like a charm. I have 2 Motos an H810 and a H700 and an Plantronics 510. I also have been able to use internet sharing, BT file transfer, and BT sync with Black 2.0
But it could be an incompatability between the WM6 M$ BT stack and your hands free kits.
Test your phones with another BT device and see what you get.
Same problem with HS850
simon_darley said:
balck 2.0 does have issues. i also have same with motorola hs850.
only just found out. havent fixed.
bt connects as phone pad shows it.
headset bleeps on connect call and disconnect call. but no sound is sent or received.
always set to headset though not hands free.
will have to test further but definitely an issue. i didnt ask jj out of respect for his withdrawl of support.
Click to expand...
Click to collapse
I have exactly the same problem, and I didn't solved yet....but I've found this bypass:
When the phone rings I answer with the bluetooth handset and receive the beeb on connect call.....then I close the BT headset and as soon as I re-open it, I have the headset working.....I have to do this for every incoming or outgoing call.
My BT headset was working well with the black 1.2.
This is the only issue I've found in the black 2.0.....I think is the most stable and fast rom.
Bye prengo.
jcb_home said:
I don't think it a problem with Black 2.0. Too many people say it works no problem.
I'm on black and all three of my head sets work like a charm. I have 2 Motos an H810 and a H700 and an Plantronics 510. I also have been able to use internet sharing, BT file transfer, and BT sync with Black 2.0
But it could be an incompatability between the WM6 M$ BT stack and your hands free kits.
Test your phones with another BT device and see what you get.
Click to expand...
Click to collapse
My other Bluetooth devices are working fine. My bluetooth GPS receiver works just fine with TomTom... no issues there.
Just flashed back to XDA-Live (v0.20.1) and the headset works without any problem.
Only thing now is Tom Tom 6 hangs directly after the start of it. Anyone familiar with this issue?
thx
PS.: what is the differance between the Black 2.0 and XDA-Live (v0.20.1) ? other bluetooth driver versions besides the os version? Maybe there is a way to combine..?
A common thread seems to be the HS850
I have the exact same problem with my HS850. I get the call connect beeps but no sounds come through. The issue exists if the headset is connected when the call is made. If I make the call, then flip the boom and turn the headset on, then I get sounds no problem.
I had this issue with both LVSW 4-08 and Black 2.0. I eventually went back to XDA Live 0.20.1 and my BT issues all went away.
cruzer said:
PS.: what is the differance between the Black 2.0 and XDA-Live (v0.20.1) ? other bluetooth driver versions besides the os version? Maybe there is a way to combine..?
Click to expand...
Click to collapse
WMXL .20 is based on a beta WM6 build and Black 2.0 is built on an RTM build (non-beta)
With Moto HS850 too.
edwinyuen said:
I have the exact same problem with my HS850. I get the call connect beeps but no sounds come through. The issue exists if the headset is connected when the call is made. If I make the call, then flip the boom and turn the headset on, then I get sounds no problem.
I had this issue with both LVSW 4-08 and Black 2.0. I eventually went back to XDA Live 0.20.1 and my BT issues all went away.
Click to expand...
Click to collapse
Exactly the same here with HS850. Tried everything after 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10.exe but kept getting no sound.
I have experienced the same problem with my 407 hands free system. My Orange SPV C600 works without a problem, it does not show signal strength and battery level though. Using my M3100 with any of the following listed below works perfectly:
HTC English QTEK_001 2.11.255.1 03/07/07 2.11.255.102 1.38.00.10 32.71.7020.12H OS 15673.3.3.1 AKU 3.3.1
Cingular English CWS__001 2.15.502.3 04/09/07 ?? 1.40.30.00 32.73.7020.16H OS 15706.3.5.2 AKU 3.5.2
XDA-Live (v0.20.1) English 3.22.110.1 01/04/07 None None 5.1.195 (WM6) OS 17217.6.0.0
I have found all the above roms work perfectly with my TomTom 6.030 software. I am currently using Black Version 2, I have also used LVSW roms and found the same issue with any running the OS 17736.0.2.0
mike6502 said:
I have experienced the same problem with my 407 hands free system. My Orange SPV C600 works without a problem, it does not show signal strength and battery level though. Using my M3100 with any of the following listed below works perfectly:
HTC English QTEK_001 2.11.255.1 03/07/07 2.11.255.102 1.38.00.10 32.71.7020.12H OS 15673.3.3.1 AKU 3.3.1
Cingular English CWS__001 2.15.502.3 04/09/07 ?? 1.40.30.00 32.73.7020.16H OS 15706.3.5.2 AKU 3.5.2
XDA-Live (v0.20.1) English 3.22.110.1 01/04/07 None None 5.1.195 (WM6) OS 17217.6.0.0
I have found all the above roms work perfectly with my TomTom 6.030 software. I am currently using Black Version 2, I have also used LVSW roms and found the same issue with any running the OS 17736.0.2.0
Click to expand...
Click to collapse
It's great that you tracked this down so specifically. I guess this means for those of us with these issues, we have to avoid newer WM6 builds until someone looks into this.
idee2000 said:
Exactly the same here with HS850. Tried everything after 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10.exe but kept getting no sound.
Click to expand...
Click to collapse
Can't just be the ROM as my HS850 works perfectly with Black Pro 2.0
rabdo said:
Can't just be the ROM as my HS850 works perfectly with Black Pro 2.0
Click to expand...
Click to collapse
I have the same problem as the others with my HS850. No audio if the headset is on when a call is made or received but if I close the boom and re-open it, viola it works again.
I did have a problem with HTweakC where I changed the A2DP setting to on and now no matter what I do I can't get it off again. I might re-flash and see if that helps.
I don't know if it matters but I have MS voice command on my phone, even though the MSVC16BThack doesn't work anymore. (my phone is an 8525) Hope someone can figure this out, I really like the speed and stability of this ROM but if I can't get my BT to work I'm going to have to downgrade.
AdamsJourney said:
I have the same problem as the others with my HS850. No audio if the headset is on when a call is made or received but if I close the boom and re-open it, viola it works again.
I did have a problem with HTweakC where I changed the A2DP setting to on and now no matter what I do I can't get it off again. I might re-flash and see if that helps.
I don't know if it matters but I have MS voice command on my phone, even though the MSVC16BThack doesn't work anymore. (my phone is an 8525) Hope someone can figure this out, I really like the speed and stability of this ROM but if I can't get my BT to work I'm going to have to downgrade.
Click to expand...
Click to collapse
I am using Cyberon Voice Commander v2 - maybe that is why it is working for me
Hi,
I am using radio rom 1.40.30 and Black 2.0.
I am using H700 BT headset
the problem i face are opposite from you all.
If i am already talking halfway and i flip the boom to continue talking with the BT headset...it won't work.
if i receive a call and I flip the boom while the phone rings, it is ok and i can even press the button on the h700 to answer the call.
Radio 1.40.30 seems to connect with the BT headset much faster.
last time when i was using my previous default factory rom, when i flip the boom while the phone is ringing, it will take ages to connect
why not u guys try radio rom 1.40.30 also
rabdo said:
I am using Cyberon Voice Commander v2 - maybe that is why it is working for me
Click to expand...
Click to collapse
I did a hard reset, paired the headset, and tried it right away and still had the issue so it's not VC 1.6. It has to be related to the ROM as I have the same Radio ROM for all three OS images and only the XDA Live ROM works correctly.
edwinyuen said:
I did a hard reset, paired the headset, and tried it right away and still had the issue so it's not VC 1.6. It has to be related to the ROM as I have the same Radio ROM for all three OS images and only the XDA Live ROM works correctly.
Click to expand...
Click to collapse
Sorry, what I meant is that perhaps Cyberon Voice Commander is 'fixing' the issue on my system, rather than saying MS VC 1.6 was causing the problem. Next time I hard reset I will test my headset BEFORE installing cyberon software
Ok I'm still having this problem and this is what I have tried so far:
I downgraded to XDALive v0.10 and my BT worked, but no WiFi
So I upgraded to HardSPL v6, then installed the 1.40.30.00 Radio rom, and then went back to Cingular Black 2.0, WiFi back but no BT unless headset is activated after call is initiated.
Installed Cyberon Voice Commander, didn't effect anything, still no BT
Removed Cyberon Voice Commander and re-installed MS VC 1.6 installed all the hacks and still no audio in the headset.
So it looks like it is something in the ROM that is killing the BT functionality. Maybe because the XDALive is based on a beta WM6 and the Black is based on a full version?
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
which WM6 ROM are you using?
I had this problem with my Audi A4 car phone. The ROM versions using build Build 17745.0.2.3 were not good for that. Now, I'm using the Black Majik ROM and that works like a dream for the BT connections.
walshieau said:
which WM6 ROM are you using?
Click to expand...
Click to collapse
I have Cingular HTC 8525 [HERM100]
ROM Version: 3.30.2.1
ROM Date: 04/17/07
Radio version: 1.41.00.10
Protocol Version: 32.74.7020.18H
viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
Did you manage to solve this? Is so how?
Thanks
Msuk
i started having the same problems but i noticed it after i installed the voice command.. the rom that i use is the gm360 gold. the problem ive got was whenever i was in a phone call using my blutooth and i received a text message it would deactivate my headset. if ur having somewhat of the same problem try disabling ur voice command software...
Multiple AT&T/HTC WM6 ROMs?
My 8525 with the WM6 ROM can no longer route the audio to the BT headset (a Moto HS850 - but this is irrelevant, I suspect).
Basic BT headset usage was fine with WM5 (excepting the known issues with VoiceCommand).
I thought that perhaps the issue was related to the various little registry tweaks and sw patches. However, I had to do a reflash (for other reasons) and currently have just the default WM6, no registry tweaks, no BT sw patches, and MS VoiceCommand 1.6 installed (but set to NOT use the BT headset).
Pairing works fine. So does activation recognition (i.e. the little headset appears in the notification area when I open the boom on the headset and I can hear the background establishment of the BT channel). But audio (dialing tones and Connected call audio) do not reach the headset. The audio also doesn't go to the phone's speaker.
So, are the official ROM updates that repair this? Or, is the cost of going to WM6 the abandonment of BT headsets?
By the way, VoiceCommand 1.6 works fine--if I tell it to stay away from the BT headset.
Pays WM6 Roms
I had the same BT disconnecting problems with my original german Vodafone WM5 and also still have them with Pays WM6 ROMs (2.02 - 2.15) in my Audi A6 MMI.
With the original german HTC WM6 ROM BT worked very well.
Everything else on Pays ROMs is really great. He´s doing great jobs.
Any idea?
I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!
ai6908 said:
I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!
Click to expand...
Click to collapse
Come On, experts on the XDA portal, no solution?? noooo way!!??
My friend had the same issue with an tytn2 and last schap's rom in french language.
After an hard reset i get BT work fine with his OPEL.
But before i made lot of test desinstalling soft check registery key with no result. I still do know why BT was disconecting woth no reason.
Cheers.
Audi Bluetooth hands free
I had the same problems in wm6 with some roms.
I use the official HTC TyTn wm6 with excelents results, also Schaps 4.31 work very good (No disconection at all).
Now I am using Pay WWE 4.30 with many disconections.
BTW I have the audi TT bluetooth option.
On my 8525 Hermes I use the latest Pays Rom and it was disconnecting all the time (Parrot BT) - BUT then I decided to TURN OFF THE WAN and it improved greatly. Other thing I noticed is that the Hermes has to be in DIRECT LINE OF SITE of the BT device at all times or it is erratic.
BT
It seems there are differences in the WM6 versions. As said earlier in this thread for me original HTC and Schaps WM6 ROM versions are running without any BT disconnections.
Tried several WM6.1 versions now and every single one is working fine with my Audi MMI.
Similar problems handing BT control between applications
Hi all, I've been experiencing similar problems since changing ROMs. Originally with Schaps 3.60a I was able to make a call whilst listening to music all using my BT headphones. The Call would pause the music & resume afterward. It worked great! However since changing to Schaps 4.0, 4.2 & now CRC's PHKv12r9, I've never had the same. On a couple of rare occasions it has all worked fine but more often the bluetooth has to be turned off & back on again to reconnect. it seems to relate to what other programs are also running. I suspect there must be registry settings which control the bluetooth operational modes which are brought into play by the various programs running.
I've searched around for this and can't find anything, so maybe someone can help to point me in the right direction or let me know that at least the problem is known but not fixed yet.
I can't get Wifi and Bluetooth to work on my 8525 with WM6, currently using Schap's 3.54c rom and radio version 1.48.
I have motorola s805 stereo bluetooth headphones and would like to stream radio over my work's wifi and hear it on my headphones.
The problem is Neither wifi or bluetooth work reliably when used at the same time, (no problems individually). I have even tried reducing the bit pool, but can't take it below 24 because it sounds to bad then, but it still doesn't work.
Anyone have any ideas or can at least verify you have the same problem?
I have the same issue when trying to play internet radio over wifi with my ht820 a2dp linked to the jasjam (Sleuths v2 rom). The only time i ever got a2dp and wifi streaming to work was with the widcomm bt driver that is now extinct.
Thus i have come to the conclusion that the problem is not with the hw but has more to do with the standard ms bt stack.
If anyone has found a workaround please do share
Thats a start
Thanks, that is helpful.
I remember seeing a widcomm stack thread....
http://wiki.xda-developers.com/index.php?pagename=Hermes_Widcomm_stack
I'm going to check that out, also if there is a specific rom that comes with the widcomm stack I'd be interested to know.
I find that with bluetooth turned on I can associate to my Cisco AP at all. As soon as I turn Bluetooth off it works fine.
I had hoped my issue was due to the way the particular WM6 was put together but now Im using offical Dopod and it is the same.
Widcomm stack
Well I found this
http://www.htc-devs.com/uploads/Univ...m_bt_stack.CAB
at the end of the Widcomm stack for Hermes development thread.
I'm not sure where it came from, but I installed it and so far I can use IE while connected to my home wireless network, and listen to music on my headphones.
The com manager will not show bluetooth as being on, but go to settings-bluetooth and you can re-pair.
Currently I'm getting some hiccups, but its working at least. I'll keep you updated and I would still like to see a rom that incorporates this stack so that the com manager works right.
It also changes the headset icon on the top bar.
Streaming!
I'm streaming SomaFM with no problems!
AVRCP problems
I didn't notice this at first, but after the widcomm stack has been installed the AVRCP functions don't work... so Im going back.
AVRCP
It works in WMP, just not audiomanager anymore.
Bricking Blog
Pretty much what this thread has turned into.
If you install that cab above, don't uninstall it, you'll get bricked.
helpful reading
I have problems with my Bluetooth and the paired device in the car with almost every recent ROM.
After about 10 minutes driving with a connected phone, the Bluetooth shuts down on my Diamond. When I go to Settings -> ... > Bluetooth -> Mode -> Turn on Bluetooth is unchecked. If I check it again it connects again with the phone and about 10 minutes later it's off again.
I went back to the RUU_Diamond_HTC_WWE_EastEurope_1.93.479.3_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe. It's against my feelings, believe, etc. but I want to solve it .....
I installed Advanced Configuration Tool (3.0), went to Bluetooth -> Audio gateway power save and Disabled it. I did it because I was reading about suspended devices and power save features. I thought that the loss of Bluetooth is been caused by a saving power feature.
After a soft reset, the Bluetooth stays connected.
It's a start, but I'm not happy with it ... I would like to use cooked ROM's and optimal settings in the ROM.
There are other tweaks too in Bluetooth, for example the supported bitpool, etc. Perhaps those settings cause the shutdown of a connected Bluetooth device instaed of the power save feature.
Has anyone this kind of problems too with paired Bluetooth devices?
If so, would you like to help me to find the cause?
If not, can you describe what device you use (Jabra, TomTom, car radio, etc.), which ROM, which radio and extra tweaks?
Hi
I do have the same problem. I am using my Diamond with my Opel Astra (Vauxhall) and a CD70 radio with built in handsfree (Opel UHP). It disconnects after 10 minutes and after calls. Everything else works fine. Changing rom and radios has not helped so far. If I don't close the comm manager it stays connected but disconnects after a call because the comm manager is closed with the end of the call. Is there a way to force the comm manager not to close?
Olli
olliver said:
Hi
I do have the same problem. I am using my Diamond with my Opel Astra (Vauxhall) and a CD70 radio with built in handsfree (Opel UHP). It disconnects after 10 minutes and after calls. Everything else works fine. Changing rom and radios has not helped so far. If I don't close the comm manager it stays connected but disconnects after a call because the comm manager is closed with the end of the call. Is there a way to force the comm manager not to close?
Olli
Click to expand...
Click to collapse
I have a CD70 too in a Opel Zafira.
This "comm manager" thing is interesting, but it looks to me like an Opel issue.
Can't you flash firmwares by opel?
Riel said:
Can't you flash firmwares by opel?
Click to expand...
Click to collapse
That's an option, but my Trinity (P3600) performed great with the same car. Will an upgrade solve my problems? I know one thing, it's not cheap either.
I tried it with different ROM's, but it still happens.
I tried it with different radio's, nothing changed.
Till today, I've got now the new radio (v1.05.25.BS14).
http://forum.xda-developers.com/showthread.php?t=432770
It has fixed the delays in GPS + faster GPS fix and more important fo me Bluetooth didn't stop today.
I'm sure 100% sure yet, but seems to be better.
I got something to complain too about the new radio. The radio signal is less strong than the .05 radio.
Same problem here
My Vectra is equipped with CD70.
Previously I've owned a Kaiser and the problem was solved by one of the 6.1 radios, bluetooth connection was rock solid.
Right now I have the same problem with Diamond - after every single phone connection, when I'll hangup, the phone disconnects CD70. When I'll try to reconnect manually using CD70 everything is fine.
I've noticed that the same problem exists when I'm using Nokia bluetooth headset - one call, bluetooth connection dropped...
I've tried following Diamond radios:
.05
.07
.08
.BS14
and two Raphael radios by Bepe:
1.03.25.18
1.02.25.11
Each Diamond radio behaves the same way. Each Raphael radio adds a bonus - random bluetooth connection problems.
Right now I'm back with .05, I think I'll look for the software I've seen once (can't recall the name) - it's a PDA application designed for connecting to the car bluetooth systems and it has been cerftified to work fine with CD70.
Use Jetware Mobile for htc-diamond.
jetware
That's the software I couldn't remember the name.
Anyway I gave it a shot and it gets even worse, I couldnt get the connection lasting longer then 2-3 minutes, totally unstable
Right now I got back to radio .08 - the bluetooth link is rock solid, I guess I'll just need to get used to reconnecting after each phone call
Same bluetooth system in my car, same problems as you guys.
To avoid the disconnections after calls you need to go, with 'Advanced Config' to bluetooth->Audio gateway power save, and switch it to disabled.
For me this little change solve the 'first' problem, but I have another one that I don't know how to solve: the aparently random bluetooth disconections. Sometimes BT is not disconnected in hours, sometimes in days.
I am also using Jetware Mobile, but i didn't feel any improve...
The random ones depend on the radio rom version - I was using .05 and it was rock solid.
I will try .16 with audio gateway started and with power save disabled as you advised - I thought about it earler but previously I tried to disable the power save without enabling audiogateway service
Well, we will see if it works or not.
Hi,
I also have a Vectra CD/70 combination, for 2 yrs now.
I had a HTC3300 and 2years i had not a single problem with Bluetooth connection.
Now i have a HTC Diamond Touch Pro and have the same problems you guys have.
I tried all your suggestions, radio's and so on with no good result.
The good news is .. its an Opel problem and it seems to be that a Bluetooth Firmware Upgrade is available from Opel Germany. I just contacted my dealer and next week he will Upgrade my bluetooth firmware.
I will keep you guys informed.
Hello,
had the same problem with my Opel CD70.
Using Jetware Mobile and limited the entrys who copied to the car to a max. of 5. Also disable the call lists. Now it works.
I think the Opel/Vauxhall Bluetooth Connection disabels if to many entries are copied to the car.
Hello,
any News about our Bluetooth Problem ???
I also have a CD70 from Opel and I cannot understand why my Diamond swich of Bluetooth after a while ?
Is it an Opel-Problem or does anybody now an Application which helps ?
Thanks a lot for Your help,
Stepos
Hi,
I am currently using BTrestore (http://home.casema.nl/rgschmidt/WM/Downloads/BTRestore_V_1_0_0_PPC.ARMV4.CAB). This utility checks the status of the bluetooth stack every 5 secs and (re)enables it everytime it's down. It seems that the 5 secs are short enough to keep the phone connected. It's not a real solution and unfortunately this tool is sometimes instable too, but it absolutely extends the connection time with the UHP.
Maybe bullock can tell us if the carkit upgrade solves anything...??
I also created a ticket at HTC, but they refuse to troubleshoot user specific issues. They told me they only look into issues if they get enough calls from different users and to keep an eye on the update site (they seem to be able to solve issues without knowing what the actual issue is...). So I would encourage everyone here to create a HTC ticket for this issue. I still think it is an HTC issue: a bluetooth stack should never go down without any user intervention.
Good luck!
BTrestart and Jetware Mobile doesn`t help, my Touch diamond disconnect again from Opel CD70 and swiched off Bluetooth !
Can anybody help ?
Sorry guys, the OpelDealer is still "searching" for the Bluetooth upgrade.
After several phonecalls maybe next week (1st week of Febr) it will be made available to the dealer.
Like i said ... i willl keep you informed ... still have this lousy problem !!
..does anybody use the new Rom 2.03 ? Any difference ?
I also asked my Opel-Dealer for an Update of UHP, next week I 'll get new Information....
... well guys I had my CD70 updated !! I am/was very sceptical because the only thing they did was a re-install of the Language of the Navi System with a version 2005 CD. I asked if that was all to correct my Bluetooth problem .... the (smiling) answer was YES.
I have it now for 24hrs ...... and Bluetooth is still on )
I will let you know the result after a week !!
..i can't beleave it works with a 2005-update ! Great !
My Opel-Dealer is still busy in selling 10 Opel Corsa every day (..the magic word is "Abwrackprämie") , so I'll have a date there next week...
When I bought my Vectra the dealer had also to reinstall the Language-CD, maybey it was the wrong version....
...... Sorry guys ......
This update DOES not do the magic trick !! So we have to find another solution
who has the right idea ??