Greetings XDA,
Recently i have dropped my rhod100 and broke the digitizer which actually didn't affect the device except the accuracy of the screen abit and the annoying broken glass.
so today i got a replacement Digitizer, i opened the device and to my surprize, the LCD is glued to the digitizer and it's really difficult to separate them. so if you want to change one of them, make sure you order both bacuase 99% of the time you will break one of them.
notice that hair dryer did help in the spearation but the LCD didn't make it in my case
waiting for my new LCD to reach so i can continue the repair, for now i have no device :'(
Related
I have replaced my Evo4g digitizer following a major fall. I had to replace the lcd screen as well. Since then, my Evo has had to have the digitizer replaced twice in the past two weeks due to it cracking. It cracks with very little, if any pressure is put on it, as it is in my pocket when this occurs. Why would my digitizer keep cracking? What could I have possibly done wrong during the replacement process that would cause the digitizer to crack? Any ideas or help to solve this problem would be appreciated, as I cant keep replacing the digitizer!!!
A few things could cause it cracking. One, just a crappy brand/quality of digitizer. Two, incorrect installation/mounting. Three, the drop caused the actual phone to become deformed, meaning the digitizer just isn't fitting in the case properly.
I second the incorrect installation. This happened to my E4GT before I fixed it and gave it to my bro.
I'd clean out the housing thoroughly to make sure any shards aren't lodge in somewhere to prevent it from sitting in correctly or to damage the digitizer when you put everything back together
Dropped my phone on asphalt today and got a big hairline crack across the screen . (Attached pics)
It really hurts cause i always baby this phone and just the rush to get to work and in my car, completely missed my pocket.
The screen is still responsive to touch and seems to be working normal thank god the lcd screen wasnt damaged and the digitizer didn't shatter.
Got a few questions t
1) just wanted to clarify that the digitizer lies ontop the LCD screen?
2) and that is all that needs replacing?(from damage seen in the pics)
3) also mine is branded just HTC(no carrier, so it's international GSM version?)
4) would it matter if i bought a replacement digitizer meant for the at&t version or not?
5) should be getting a one x that had some water damage and is no longer working. would the digitizer from this phone be a viable option for me to use as a replacement or should i just order the part online.( I really want it replaced fast and if i have to order the replacement it will take about a week to 2 weeks to arrive in my country
so apparently i can't attach any urls until i make 10 posts or i'd show u guys the part i wanted to order but its basically just a screen digitizer from ebay with tools needed for about $17.86.(is that cheap, good or expensive price considering the item + tools)
can you guys please search for it on ebay?the title of the post/part is Touch Screen Digitizer Glass Lens Replacement For HTC One X S720 + Free Tools
the link above is the item i'm looking to order for replacement. is it the right part i'm looking at?and would that be all i need or is there anything else i should add?also quality wise would it be top pick or are there any better options available?
Attached some pics also.Advice would be greatly appreciated.
You are unlikely to be able to separate the digitizer and lcd without damaging the LCD.
A water damaged phone may have a water damaged screen.
Search one of the other broken screen threads for more information.
I've replaced several screens on captivate.easiest way is get replacement(LCD+digetizer) from ebay,Google procedure.watch or read as many times as needed to feel confident to take apart phone.the hardest part is seperating LCD from phone(they use adhesive to secure LCD to phone).I used razor to carefully cut adhesive.
Most components are plug&play.just follow guide completely,u should be fine.
My LCD was $85 on ebay.good luck.
Sent from my SGH-I897 using xda app-developers app
So I dropped my S3 at school today face down on the screen. When I turned it on this is what it looked like: puu.sh/2kZuc. The touch screen is completely unresponsive and was wondering what kind of repair would I need. Would just replacing the LCD work or would it be a backlight issue? etc.
If the touchscreen is not responding, I would say you need to replace the digitizer. Check your pm.
TPU case next time Some people complain, but on flat surfaces it helps break impact
Yes it is your digitizer.
Hey All.
Been using nexus 7 2013 since last 2 years. My nephew dropped it and the screen cracked from the side. The device is working fine. The touch doesn't work at the the area of the cracks on the top right, and a few other places. But works everywhere else on the screen. My question is what has to be replaced, the digitizer or the entire LCD. My personal diagnoses is only the upper glass needs to be replaced. Please advice further!
Digitizer is for $15 and the whole thing is for $50. What has to be replaced and how to find out?
Please see the pictures and help me please
Unless you have a way of separating the glass/digitizer from the actual lcd you need the whole assembly. It's all glued together you can't just lift off the glass.
Heeeboo said:
Hey All.
Been using nexus 7 2013 since last 2 years. My nephew dropped it and the screen cracked from the side. The device is working fine. The touch doesn't work at the the area of the cracks on the top right, and a few other places. But works everywhere else on the screen. My question is what has to be replaced, the digitizer or the entire LCD. My personal diagnoses is only the upper glass needs to be replaced. Please advice further!
Digitizer is for $15 and the whole thing is for $50. What has to be replaced and how to find out?
Please see the pictures and help me please
Click to expand...
Click to collapse
You'd be much better off replacing the whole assembly. Separating the digitizer from the lcd can be done, but the problem is with locating a digitizer that works. I've tried this for about 5 times, and each time I had to return the digitizer to the vendor.
Also, since the bezel (frame) is designed so the digitizer back always touches the lcd surface (they are glued together on the original assembly), you'll have those strange "rainbow" spots on them when the device is turned off.
Not to mention that if you use an adhesive that's too thin, there's a chance the digitizer might be bent, not enough to crack it, but enough to distort touch sensitivity, resulting in some spots being unresponsive. In short, too much of a hassle for a 30-buck saving.
I recently shattered the front glass on my Z1C. The display still works, but I get so many random ghost touches that it is unusable. Just wondering if anyone here has replaced the screen digitizer by itself rather than buying the digitizer + LCD screen together. Obviously it would be more difficult, however many posts about replacing both have mentioned the lower quality of the LCD image. Since my LCD still works, it would seem like a better option to use the stock one rather than a cheap knock-off. Not to mention it would be a little bit cheaper (I saw a kit which included glue, UV torch, tools, cleaner, and the digitizer for around $18 US). But on the other hand, with the added complexity comes additional risk that I will screw it up and end up worse off than just living with a duller display.
I’m still on the fence about which way to go here. Quality is subjective, so maybe I’m worrying over nothing and the new LCD would be good enough for me. I’d really appreciate your opinions.
Thanks!
Replace all.
I would suggest you to replace the LCD and digitizer completely. I broke mine in December last year. A small glass crack along the power button side made the top half of the digitizer stopped working. The LCD was fine though. I had to connect a wireless mouse to make a backup, copy some stuffs and use my old phone, while the replacement part came. Bought mine from Witrigs.com for $42 including front housing adhesive and shipping. Repairing was easy. Just heat the front part, lift it carefully. Swap the old part for the new one.
But like you I wanted to separate the glass digitizer from the LCD first. After several attempts removing the glue and the glass, the LCD had burnt spots. Maybe I applied a little too much heat in trying to remove the glass. And the broken glass left some permanent scratch marks on the LCD even after cleaning.
In all, trying to separate the LCD and glass has become very hard since last year. I've been repairing phones and tablets for years, mainly broken LCD or glass or both. From my experience, its better to change the whole part now.
Wish you good luck for the repair. Lets hope your phone lives again!!
same here. its very hard without professional stuff to change the display glass without damaging the touch under it. best way is to buy a new "complete" display module (glass, digitizer, touch) so that u only have to press the felx ribbon to ur phone. then using the glue stripes to fix it (using a hair dryer makes it easier to press it in).
Before the installation test the functionality
Hi there!
Can someone trustfully confirm, that witrigs.com is a good source for parts?