Develop Bugs

Desire HD auto turn on speaker?

Hi, my Desire HD just automaticly turn on speaker everytime i call someone or recieved a all.
I did some searching and people say turn it off may help. I tried to turn it off (no fast boot) remove the battery, and it still turn on auto speaker
I also realized that sometimes when i turn it on, carpanel automaticly launch. So this might be some problem with carpanel. I turned off the auto option in "dock" section of the setting. Still doesnt change anything
I think the proximity sensor have problems. So i tried some test with it. It's still fine
Can someone help me with this? i even tried hard reseting my phone, it doesnt help

What rom are you using? I had the same problem once, reflashing fixed it.
Sent from my Leedroid powered pocketsized supercomputer using XDA App

I'm using stock ROM , when turn on it says the branding is SFR something. I havent rooted my phone or install any other ROM ever

Well then you could try recalibrating the g-sensor from settings -> display.
Sent from my Leedroid powered pocketsized supercomputer using XDA App

You may have flip for speaker switched on. Go to Settings>Sound and then under Incoming Calls uncheck the option for Flip for Speaker.

abhishekagrawal said:
You may have flip for speaker switched on. Go to Settings>Sound and then under Incoming Calls uncheck the option for Flip for Speaker.
Click to expand...
Click to collapse
That was what I was aiming for. The g-sensor thinks the phone is upside down when in fact it isn't, recalibrating should fix this.

mrhahn98 said:
I'm using stock ROM , when turn on it says the branding is SFR something. I havent rooted my phone or install any other ROM ever
Click to expand...
Click to collapse
ok try this my friend, take battery out, sim out and sd card out, wait a few minutes thn put everything back together and power on the phone, should solve the problem, all the best.
Sent from my Desire HD using XDA App

Hi all. thanks you so much for the support.
I've tried all the above, like turn off carmode, turn off flip for speaker...etc. take out the battery, sim card, sd card. It's still the same. After some digging, i found a topic about this on the DHD forum. They said it was an USB problem. i tried to plug it in to the USB and wiggle it a little bit and carmode/speaker auto turn on and off time to time. I was about to give up and when i'm on my way to return it. It suddenly come back to normal, no problem, tested with the USB cord. This is so weird !!!!! but i'm glad that it's gone away

mrhahn98 said:
Hi all. thanks you so much for the support.
I've tried all the above, like turn off carmode, turn off flip for speaker...etc. take out the battery, sim card, sd card. It's still the same. After some digging, i found a topic about this on the DHD forum. They said it was an USB problem. i tried to plug it in to the USB and wiggle it a little bit and carmode/speaker auto turn on and off time to time. I was about to give up and when i'm on my way to return it. It suddenly come back to normal, no problem, tested with the USB cord. This is so weird !!!!! but i'm glad that it's gone away
Click to expand...
Click to collapse
My other half had exactly the same thing on her Desire, turns out it was dirt/ fluff in the USB socket!

I have the same problem with my DHD, since I don't have the warranty for my set, is there a way around it. Like some sort of app which turns the speakers off when u make or recieve the call. That can make my life easier.

This problem started with my phone too..I tried all above such as changing rom,usb trick,sim+battery+sd remove,calibrating g-sensor ...Only thing i did not try is changing radio..If it wouldnt help me ,i dont know what to do since i dont have a warranty too..Its really annoying..

DHD speaker selfactivating
Those problems /carmode and speaker selfactivating/ started shortly after OTA 2.3 update.I honestly don't remember how I've managed the carmode issue,but initially I was able to solve the speaker selfactivating by pulling out the headphones' plug during a phone call.That did it for a once or twice,as the result lasted for a day or two.After reading the tricks suggested above I tried them with no success until pulling out the phone end of the usb during a phone call while connected to the pc in debug mode.So far I've made a few calls and it looks OK.

I don't want to scary you, but when I had the same problem I found only one solution which works- restore to factory settings... Its a pity...

Hi ,
I have the same problem on my Desire Z. I have had the phone for more then 6 months.
I was running stock: - no problem !
I was running Virtuous Sense 1.0.1 for about 3 months: - no problem !
Yesterday I got this: it auto turns on the loud speaker when I answer or dial.
Flip for speaker is turned off, G-Sensor is calibrated !
I have updated to Virtuous Sense 1.0.2 : same problem !
I have wiped off everything and flashed Virtuous Unity 1.24.0 : TWICE !
Same problem
Sorry for posting under DHD, I did not want to open a new topic on DZ forum , but I will if I must, this is driving me crazy !

I have solved this after wiping all data and flashing the rom again (3rd try !

I told it, there is only one solution- restoring factory settings...

same problem without OTA
Got the same problem since 2 weeks without having done any changes at all to my DHD (still on 1.72.405.3)
+ Car panel starts randomly when connected to USB for charging
+ Phone speaker always on regardless what I tried before
So, I really do not think this is a rom related issue but more a "aging" problem like the GPS connectivity.
Anybody any idea, why the USB plug should be respobsible for this strange behaviour?

I'm not sure this is a USB related issue. It may be the audio jack. My problems started after unplugging the headphones while listening music, to answer the phone.

same problem here ...

My phone also started having the same problem since today morning!
EDIT: So I tried to remove battery, then cleaned the micro-usb port and the headphone port and the issue seems to have disappeared atleast for now. Don't want to do a factory reset as have too much data and apps on phone.
EDIT 2: So as it turns out it was Go SMS Pro problem that was causing the issue since its update 2 days back. The developer has released a new version in Market now claiming to solve the issue.
Anyways whatever issue it is hope it does not return.

Headphone-only calling

Trying to help my sister fix her phone and would appreciate any help. Very familiar with the Vibrant but can't seem to find an answer to her problem. What the problem is is that one day a couple of weeks ago she plugged in her headphones to listen to music and now her phone is constantly showing that her headphones are plugged in still. She cannot hear who is calling her and they can't even hear her without the headphones plugged in. I've searched XDA and google and have not been able to even find someone who has had this problem before. I'm 99% sure she has tried a reboot and a battery pull to no avail. Thanks in advance for your help guys!

Really? Not one person has ever had this happen? Think maybe a factory reset? I mean, I'd hate to do it bur if Tmo is gonna do it anyway I guess it makes no difference to try, right?

if you can something probably got stuck you can use a q-tip to clean out, as well plug in headsphones, then turn the phone off and unplug the headset and turn phone on, last thing is do a factory reset, if root can do a nandroid and do wipe

[Q] Help!! a100 Blackscreen

i have a a100 with the latest flexreaper rom installed and im stuck with a pretty serious issue:
a couple of days ago the tab was acting real slow and sluggish and getting bad battery life didnt think nothing of it so i just rebooted a couple times and left it alone . all was good untill the battery hit 10% and i plugged it up using the factory ac adapter. the next day (maybe 6-7 hours later) i went to turn it on and nothing no vibrate no screen flash nothing; other than the power button turning blue as i pressed it and it would stay on for a couple hours but still no other response from the tablet.
im at my wits end on what could be wrong and now i got my wife with her foot on my neck till i get it fixed. can anyone help me?
ive tried to do a hard reset with the reset button tried to boot into recovery /bootloader no dice
(also my home button flashed a couple time i pressed the power button) dont know if its relevant but wanna get as much info out as possible

wondering if anyone can help me...

frenize said:
wondering if anyone can help me...
Click to expand...
Click to collapse
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.

pio_masaki said:
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged

frenize said:
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged
Click to expand...
Click to collapse
Yeah I know that sound it means USB connected but error for some reason. Its been shown if this thing dies all the way down it wont read the battery correctly and probably needs to be sent in. Before that I personally would unplug it open it up and remove the battery for awhile, maybe an hour then put it back and plug it in. But thats me, not the advice I'm giving. If you have warantee on it use that.
The batteries on a lot of devices and laptops etc have something of a fail safe, if the voltage drops below a certain point it trips to prevent cell damage, however it renders the battery useless.
I haven't searched out much past that if a reset is possible by us, but it seems the pack is trash after or needs sent in.
Since this is a sealed unit you void warranty opening it (well unlocking the boot loader did too) so you can't send it in for repairs without paying for it.
I hope someone can jump in and help figure this out, and prove me wrong.
Tapatalked from my Galaxy S II.

Weird, This exact same thing happened to me. Used it in the morning and now after work it won't turn on. I had already tried disconnecting the battery, but hadn't thought to leave it disconnected for an hour. My tablet has been running the leaked ICS since it came out and The last factory reset it had was about a month ago. It was working fine up until this. The power button seems to be responding correctly, the issue is that after the LEDs light up, there is no vibration or display. I hope someone can help us with this issue.
EDIT:
It won't connect in ADB mode. It will only appear on my computer as an APX device and since there is no vibration I am unable to boot into fastboot. Any help or suggestions? All the threads I have found have involved booting into fastboot.

i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen

same thing here.
max69power said:
i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen
Click to expand...
Click to collapse
I have been using ICS the leaked one, and last night I was goint to check my email and it did not turn on, I though the battery died. I plugged to the charger and this morning I tried to turning it on but it failed. I did the reset pin but nothing. I connected to the computer and it was recognized as a APX device and installed a driver ACER Picasso USB recover but i cant access anything. I am a nob. Thanks

A100 blackscreen
i am also having this problem. last night. just a black screen it turns on or the home button dose but nothing comes up on the screen. :crying: Help!!!!!!

Has anyone tried holding the power button for a while? Laptops do this too, if someone felt ventures, try taking the battery out and hold the power button. No promises, might work.
sent from my ICONia

same here
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.

If the screen is blank while powered on its in failsafe mode, in other words is bricked, has to go to Acer.
Tapatalked from my Galaxy S II.

This just happened to me a few weeks ago as well. If you are still under warranty send it in to Acer, thats what I did. I just got an email saying they had fixed it and were sending it back for free!!
At the time I was on the 9/02 JB build. I wonder if this issue is caused by faulty hardware or if it is an issue that was made by rooting and unlocking it? I don't know enough about this stuff to answer that though, but it does make me think whether I should root/unlock it when I get it back or leave it stock.
Also thanks Pio_masaki for helping me a few weeks back wasn't sure if I was even going to send it in until you said they most likely won't be able to tell.

I highly doubt they even CARE when sending these in. They will void for physical damage most likely.

tshm55 said:
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.
Click to expand...
Click to collapse
Ohmygod,
Same here, but it's 3 years ago. Sorry for digging the topic. Still no hope? I still keep the tablet and have just buy another refurbished mainboard to replace but still no vibrate and blacksreen still there.

M8S Problems

Hi guys
I got an HTC M8s less than 2 months now and it has so many issues it's driving me insane at this stage....
It's on stock ROM unrooted with all the latest updates.
First issue that came up was not recognising the headphones after i plugged them in, that eventually went away after lots of searching and fiddling with settings etc.
Then it started going into Car mode while it was resting on the table, no input on my end no triggers set for it, hell i don't even own a car to use this function....
I disabled HTC car and that stopped.
The included micro usb cable somehow went bad, tried it on other devices, it will not charge....
Now i'm having some weird charging behaviour, it drops out of charging and resumes or sometimes it just stops charging (that doesn't happen when the phone is charging while being switched off, so i'm guessing it's not a hardware issue)
Another massive problem is that all incoming/outgoing calls go to the speaker which almost burst my ear drum first time that happened.
I have looked in every single forum out there and have tried all possible solutions, ranging from disabling google Chrome to trying every available speaker management/toggle related program on the play store but nothing seems to be working.
Some times if i plug in the headphones, make a call and then unplug them, then it works as it should for a little while. But later on it reverts to the previous mentioned behaviour.
One thing i have noticed, before it routes calls to the speaker, the screen will light up, no notifications come up and then all calls go to the speaker.
I used Wakelock to try and find out which program triggers the screen wake in order to remove it and maybe solve this issue but nothing came up.
Any input would be greatly appreciated as i am at the end of my rope with this device....
I still have my HTC DHD A9191 and i never had any issues with that phone, i'm very dissappointed with HTC :/
Thanks in advance
Yanni

Less then 2 months......return it ! Not even sure what you want to achieve here besides messing up warranty ?

I am using Spign slim armor case on m8s and after using it my power button isn't working.
and I have a Motion Launch problem when phone is on my pocket it opens camera, calls someone because of the sensor.Any fix about that?

Kyaner said:
Hi guys
I got an HTC M8s less than 2 months now and it has so many issues it's driving me insane at this stage....
It's on stock ROM unrooted with all the latest updates.
First issue that came up was not recognising the headphones after i plugged them in, that eventually went away after lots of searching and fiddling with settings etc.
Then it started going into Car mode while it was resting on the table, no input on my end no triggers set for it, hell i don't even own a car to use this function....
I disabled HTC car and that stopped.
The included micro usb cable somehow went bad, tried it on other devices, it will not charge....
Now i'm having some weird charging behaviour, it drops out of charging and resumes or sometimes it just stops charging (that doesn't happen when the phone is charging while being switched off, so i'm guessing it's not a hardware issue)
Another massive problem is that all incoming/outgoing calls go to the speaker which almost burst my ear drum first time that happened.
I have looked in every single forum out there and have tried all possible solutions, ranging from disabling google Chrome to trying every available speaker management/toggle related program on the play store but nothing seems to be working.
Some times if i plug in the headphones, make a call and then unplug them, then it works as it should for a little while. But later on it reverts to the previous mentioned behaviour.
One thing i have noticed, before it routes calls to the speaker, the screen will light up, no notifications come up and then all calls go to the speaker.
I used Wakelock to try and find out which program triggers the screen wake in order to remove it and maybe solve this issue but nothing came up.
Any input would be greatly appreciated as i am at the end of my rope with this device....
I still have my HTC DHD A9191 and i never had any issues with that phone, i'm very dissappointed with HTC :/
Thanks in advance
Yanni
Click to expand...
Click to collapse
ok man
look i have htc one m8 + one m7+one max
the one m7 had the same problem of u
i will give to you one solution for try
i try it on the one m7 and its work
but on one max not work
on m8 not test yet
try this:
1. Turn phone OFF
2. Let charge for AT LEAST 10mins even if it doesn't look like it's charging.
3. Press and hold POWER + VOL UP + VOL DOWN for AT LEAST 2mins. Anything less will not reset the charge mode.
4. After 2mins release the buttons and the phone should boot as normal
if it not charge at the first time then try it again andd u will be OK

Hi Hazem
Thanks for the input, i'll give this a go when i get back home and let you know if it works out.
Should i try this when the phone is at 4-5% ? And then let it charge all the way ?

I'm experiencing these same issues as well after rooting my M8. Hopefully someone here knows what the issue is.

Well for me all issues remain unresolved.
My guess so far for the culprit seems to be the magnetic sensor, either badly programmed or a factory defect.

Kyaner said:
Well for me all issues remain unresolved.
My guess so far for the culprit seems to be the magnetic sensor, either badly programmed or a factory defect.
Click to expand...
Click to collapse
u must charge ur phone
turn off the phone
let him charge to full about 3 hours
and try the method
it will work
i test it on 2 one m7 phones
let me know if that work
thx

Sorry Hazeem I understand that English isn't your first language, and you are trying to help but you are not making much sence....
You are basically telling me to charge my phone, then switch it off and charge it again even though it's already charged for another 3 hours....
Ok an update !
HTC Released a service pack along with an update for the car application, after installing these and a couple of reboots the charging problems stopped and the phone doesn't seem to be waking up without any reason, as it did before.
The calls getting routed to the speaker still remain but thanks to an app called Auto Speaker, I've managed to work around this issue. Before the updates this application had no effect, but now it works as it should by turning off the speaker when the proximity sensor is blocked.
I hope I am not celebrating too soon on this and I'll keep this post updated if anything else, related to these issues, happens.
Update 2
So far so good and with another unexpected benefit, I removed my phone from the charger Saturday morning around 11 and as of now Monday 7:30 it's at 27% !

Volume button + WiFi Problems + Touchscreen no reaction + Board computer problems

I have some questions. (Copy from the old thread)
1. I mean that i read it here, but I'm not sure. At the moment I have very often the bug, that the volume button not works. Mute works, but louder and quieter not. I don't know when it doesn't work, but after a while no function.
2. Since a few days I have the wifi problem, that wifi works sometimes and after a while too, it shows empty bars and shows the connection but it doesn't work. In other case if I start the radio he can't find any WiFi. Why?
3. Since a few days the touchscreen doesn't work. I have set, that i can See if i touch. Then it shows a point. so i can see that the touch works, but there is no reaction. After a minuten the radio shows the bootlogo and have a loop. So i have start the radio new with reset or power off from the car.
4. Since a few days if i turn off the key normally all lights form the radio and display shut down. Additionally board computer shut down too after a few seconds. Now the light from the dvd tray is on and board computer too (after a lock from the car too). I dont know why but I don't know if that is so good (Battery).
All this errors are since a few days. I tried to do any settings but the problem is always here. Does anyone no about that? I think it's an app, but I don't know which one. The last chance (if I get no solutions) is to install another rom? That is really crazy, because it's only since a few days. The days before it works perfect.
I have JY 2.73 with the Malaysk Rom from September (1024).
Thanks

Update: Now i installed 2.59 JY and tried again. WiFi will always gone with no bars. So i turn off and turn on again. At the most cases it works. But the problem is here again. The same with the touchscreen crash. 3G doesn't work. always no bars.
So the previous MCU doesn't work again. Maybe a software error.

Could you please try to measure the voltage alignedto the HU while you encounter those problems? I rellay mean at the radio side (so not at the battery poles).
Such issues could be lack of voltage. If not and flashing does not solve it could be a defective unit.
Just to ensure: You flashed Firmware AND MCU? AM I right wit this assumption?
If not: Try to flash a new ROM first (probably try Malaysk ROM)
Btw: Moved to Q&A

dark alex said:
Could you please try to measure the voltage alignedto the HU while you encounter those problems? I rellay mean at the radio side (so not at the battery poles).
Such issues could be lack of voltage. If not and flashing does not solve it could be a defective unit.
Just to ensure: You flashed Firmware AND MCU? AM I right wit this assumption?
If not: Try to flash a new ROM first (probably try Malaysk ROM)
Btw: Moved to Q&A
Click to expand...
Click to collapse
Thx for answer. How can i measure that? Do you know which cable it is? And if the cable shows not the 12V? What can i do to fix the problem?
Sure. I have Malaysk Rom and the MCU JY 2.59.

you would have to get amulti- or vooltmeter and attach that between plus and ground pins at your HU.
If you don't know how you should eigther try to follow another way first if possible or ask someone to do it for you (it's electrics)

dark alex said:
you would have to get amulti- or vooltmeter and attach that between plus and ground pins at your HU.
If you don't know how you should eigther try to follow another way first if possible or ask someone to do it for you (it's electrics)
Click to expand...
Click to collapse
Thanks. I ordered a multilmeter. Maybe it's the battery. At the moment the car works really hard if I start it. The radio takes so much battery but the radio is off. So that can be the problem.

low voltage can cause many weird problems but you have to know a new battery might not solve your problem!
If you have low voltag while the engine is ruunning then you have a different problem. eighter there is a connection issue somewhere on the path the energy takes from battery and generator to the HU or your generator might have a problem. But that is open to check when we know if it really is a voltage issue.

Hi,
i'd like to give you an update for my problems. Since the last days I have the problems, that my car didn't start. Now we see, that the battery is nine years old. Now I charged the battery (tomorrow I'll get a new battery) and the first test shows WiFi works for 3 minutes. I know - that's not a lot, but I only can try if I have the new battery. 3G doesn't work - always the same. But that's not so important for now.
At the moment I don't have the volume error. I will test it, If i have a longer car drive.
The problem with the touchscreen is actually. Since a few time, after few minutes the touchscreen is bricked and I see the points that i touch it, but I can't click anything. If I touch ten times, twenty times or often then radio shut down and shows the boot logo... forever... it doesn't boot again. So I have to make a hard reset.
And the last point with the light board computer and the light dvd slot after plug off the key is actually too. It don't shutdown the lights on the standby time from 10 minutes (set it to 10 minutes). I know now, that I can shutdown it completely if I press the volume button for 3 seconds. Than it's turn off. So it's a setting problem from the firmware?
Today I plug in the key - nothing. Radio doesn't start. So I looked behind the radio and saw, that one thin cable is not in the wiring harness and I can see the wires on the cable. So I tried to put it in the wiring harness again. I hope it works longer now. I wrote carjoying and ask for a new wiring harness. Maybe all problems will be fixed, If i have a new.

Hello again,
now I've got a solution for the wifi problem. I've tried to connected wifi - i Known that doesn't work only few seconds and after a few seconds it shows 0 bars on wifi... now I disconnected my 3g stick and LOOK it works... full bars, no losing connection. I connect 3g again and the same problem after a few seconds.
So th3 3g stick (E1750 from Huawei) makes some problem OR the usb cable?

Huawei E355 also not working. Same connection problems with malaysk rom MTCD
Any suggestions?