hi
I have the standard HTC Rom on my TouchPro2.
- Is it possible to DEactivate the vibration feedback for the touchscreen while typing or using the menu??
- the Navigation bar in landscape mode always disapears after a few secs, then i have to push a button for appearing again. is it possible to set the time counter up so the navigation disapears for example after 10 secs and not 1 sec?
it would be great if someone could help me. this is very important for me
thank you !
For the Vibration part, there should something in Setting's under "Touch Options"
Click that, and then uncheck the check mark, and you should be fine.
thanks, that helped!
so there just my second problem left about the navigation dissapearing.
noone an idea?
cern said:
noone an idea?
Click to expand...
Click to collapse
I'm looking and hoping for the same answer...I'm sure that since it disappears after a specific amount of time, there has to be a timeout setting for it in the registry, but I've been digging in there and haven't found it yet
then pls post it if you find out how.
unfortunately i didnt find it out yet
Related
Has anyone else experienced this problem with their P3300?
Unpredictably, the screen on my P3300 will fail to come back on after I have shut the device off with the power button. I know the device is on because the hardware buttons light up when pressed, but the screen appears almost completely dark and won't come back on when tapped. The only way to get the screen back to normal function is to get to the backlight settings and adjust them. This seems to return the device to normal function...until it randomly happens again. I'm seeing this about two or three times a day.
At first, I thought I needed to soft reset - and this worked - I then just went to the backlight settings to modify them and got back normal function for a while. The strange thing was that after the screen issue and the soft reset, my backlight settings for battery power were on "brightest" - and they wern't there before the issue popped up.
Now I have a WA2 shortcut on my top bar that goes to backlight settings. I know approximately where it is on the screen, so when the issue pops up and the screen is pitch dark, I can tap in that general area and get to backlight settings. The screen is still dark, but I can just make out the backlight slider enough to adjust it from there and avoid the soft reset.
So, basically, it seems as though my backlight settings are randomly resetting themselves to the lowest setting every once in a while after power off. Anybody else with an Artemis seeing this? Seems a little similar to the first of the three questions in this thread, but not exactly the same:
http://forum.xda-developers.com/showthread.php?t=281763
Any help or empathy would be appreciated!
I've had that, too. I assume the program for the allocation of the soft keys has a bug. You had to HARD RESET, and dont change the soft keys any more.
I've read some more about this issue and it seems it is a WM5 bug that is seen across devices. I guess I can hope they will address it at some point in a future ROM release. Thanks for the suggestions anyway.
Check this out for more info:
http://www.sbsh.net/forums/index.php?showtopic=12842
Sleep Mode
What you are describing sounds like sleep mode
" Quickly pressing the POWER button turns off the display temporarily and switches your device to sleep mode. Sleep mode suspends your device to a low power state while the display is off in order to save battery power "
Click to expand...
Click to collapse
(Taken from MDAC3 Manual)
Pressing the power button again should bring it out of Sleep Mode. If it is getting stuck then it is possibly a bug affecting the sleep mode.
Hi!
Any news on this issue? My phone is acting just like described in this thread (and no, this is not standby/sleep mode)
PK
This only hapen to me after a soft reset. And the only way i found to "fix" the problem was after every soft reset going to Settings>Backlight move the brightness bar up and down. And after that it never blocks the light again until the next soft reset. Sometimes when connected to usb it blocks too but if you always go to the backlight, befor e the light goes off, and move the bar it wont block anymore...Its not a real solution but the only way i found...
Imaginati0n said:
This only hapen to me after a soft reset. And the only way i found to "fix" the problem was after every soft reset going to Settings>Backlight move the brightness bar up and down. And after that it never blocks the light again until the next soft reset. Sometimes when connected to usb it blocks too but if you always go to the backlight, befor e the light goes off, and move the bar it wont block anymore...Its not a real solution but the only way i found...
Click to expand...
Click to collapse
Yeah, that is all I am doing too. Hopefully HTC is noticing this problem too and a future ROM release will alleviate the problem. Perhaps a Crossbow upgrade someday????
I have the same problem. I found out that it happens when PhoneAlarm switches my profile from work to home.
Solution!
Check this thread out:
http://www.pocketmax.net/smf/index.php?topic=3324.0
As stated above, looks like PhoneAlarm is the culprit. I use it and I would bet that everyone posting in this thread does too. In fact, Bruce from PocketMax has even listed the Artemis Backlight corruption issue as a fixed item in his latest release, v1.57 available here:
http://www.pocketmax.net/phoneAlarm.html
Once you download and install, make sure to go the the backlight % setting in each of your profiles and select "Leave Unchanged". This alleviates the problem. My Artemis no longer goes blank without backlight slider manipulation after a soft reset!!! One less thing to worry about!
I had the same problem ... I try your solution and make a feed back
I too have had this problem and have PA installed - I'll also apply the solution and report findings . . thanks for sharing.
Hi!
I installed the PA 1.57 upgrade, but it did not help... But it seems like the backlight settings on the Artemis device is not standard, so I uninstalled Spb GPSR monitor (who has a backlight setting option), and then the problem disappeared.
PK
Looks like any program you have installed with a backlight setting option needs to be adjusted not to change the backlight settings in order for things to work properly for the time being. I'm sure that software developers will adjust to this new device soon just as PA has. Thanks for the feedback!
hi,
i have PA 1.58 (build 100), and the reminders for missed calls not work properly. the orange led is blinking, but the vibration and the sound are
not played (i have set the alarm reminder to 1 x 5 min x endless)...
please, test and indicate to me if this function works on your artemis...
the reminders for sms works fine.
thank's
Ahqar said:
Pressing the power button again should bring it out of Sleep Mode. If it is getting stuck then it is possibly a bug affecting the sleep mode.
Click to expand...
Click to collapse
In other forums they have this 'problem' too, and all of these people had SPB Pocket Plus installed. My guess is that it is a backlight setting in that program. You can temporarily get the backlight back on by connecting the phone to the pc through ActiveSync, and change the settings accordingly.
Hard- or softresets shouldn't be necessary to solve this.
@phonealarm users,
you can fix the unserious backlight bug if you are using at least v.1.57 or higher and set all backlight settings (battery and pluged) in used profiles to the option < LEAVE UNCHANGED >
@all
happy new year!
Ok! so i am not alone! a couple of times i did face this situation. the screen doesnt come up, but the device is on, and i am able to see a slight silhoute of the icons, very very light. and i have to do a softreset to get it back on.
bmod said:
@phonealarm users,
you can fix the unserious backlight bug if you are using at least v.1.57 or higher and set all backlight settings (battery and pluged) in used profiles to the option < LEAVE UNCHANGED >
@all
happy new year!
Click to expand...
Click to collapse
Yep, that´s it! In every app offering different profiles (like PocketZenPhone, PA, etc.) Settings for Backlight (including Minutes to switch off) must be exactly the same in each profile! Maybe <Leave unchanged> will work, too!
bmod said:
@phonealarm users,
you can fix the unserious backlight bug if you are using at least v.1.57 or higher and set all backlight settings (battery and pluged) in used profiles to the option < LEAVE UNCHANGED >
Click to expand...
Click to collapse
Hey Guys,
We appreciate the posts about Phone Alarm, but if you just read this entire thread before posting you would have seen that this is old news and this issue was resolved in post #9!
Thanks anyway!
Oh, and Happy New Year as well!
hi,
please, tell me if pa reminders for sms and missed calls work fine in your p3300.
i have installed spb pocket plus and pa and the reminders for pa not work now.
please, if this combination works for you, explaine your config settings.
thank's
i've tried CSDEVCTRL, however, it cannot lock my device after the set time when i mantual turn it off. and the "lock on wakeup" is a mess when someone call me or the reminder pop out.
anyone know how to auto lock my device after a set time even i turn it off before thetime due?
by the way, Windows mobile 6.5 is used
Software SensorLock v0.4.
HKCU/ControlPanel/BackLight/AutoDeviceLockEnable=1
sam1st said:
HKCU/ControlPanel/BackLight/AutoDeviceLockEnable=1
Click to expand...
Click to collapse
thank you,
this is exactly what i want,
have a nice one
sam1st said:
HKCU/ControlPanel/BackLight/AutoDeviceLockEnable=1
Click to expand...
Click to collapse
sorry for this question
but witch program i need to do this??
where i can do this?
sam1st said:
HKCU/ControlPanel/BackLight/AutoDeviceLockEnable=1
Click to expand...
Click to collapse
I changed the registry.
When the backlight is off and the screen is lock, the backlight does not go on when I unlock the screen at this moment.
Have to press the power button to turn the screen off and on again for the backlight to work properly.
Is there a resolution on this?
Thank you.
tinyau01 said:
I changed the registry.
When the backlight is off and the screen is lock, the backlight does not go on when I unlock the screen at this moment.
Have to press the power button to turn the screen off and on again for the backlight to work properly.
Is there a resolution on this?
Thank you.
Click to expand...
Click to collapse
I also got this problem, waitting the resolution.
flipflop2008 said:
I also got this problem, waitting the resolution.
Click to expand...
Click to collapse
anyone solve this problem?
tinyau01 said:
I changed the registry.
When the backlight is off and the screen is lock, the backlight does not go on when I unlock the screen at this moment.
Have to press the power button to turn the screen off and on again for the backlight to work properly.
Is there a resolution on this?
Thank you.
Click to expand...
Click to collapse
It looks that there is a problem with Blackstone Roms, all of them have this problem. I always used autolock and my solution was to disable the Dim timer on the Power settings.
This way the phone will only locks when it powers off.
I'm not facing this issue with Duttys 6.5 Leo Test 2
hmoroni said:
I'm not facing this issue with Duttys 6.5 Leo Test 2
Click to expand...
Click to collapse
I can confirm that! I don't have the issue with that ROM.
But:
When i press the CallEnd button for some seconds to lock the screen manually then there seems to be a kind of a delay until the lock screen appears.
is there a way to get the lock screen immediately or is it a general winmobile issue?
I don't know why, but nobody mentioned S2U2. Works perfectly on all Dutty ROM's and does all the things needed to solve this problem.
I set it to "Lock when device wakes up". Additionally I chose not to use S2A (Slide to Answer) in favor of the default answering slider which works like a charm for me. When somebody calls me S2U2 automatically unlocks and I have full access to the answering buttons.
Further I disabled the automatic power off by S2U2 and let WinMo do this in order to prevent conflicts between the different power managments.
namelessrabbit said:
I don't know why, but nobody mentioned S2U2. Works perfectly on all Dutty ROM's and does all the things needed to solve this problem.
I set it to "Lock when device wakes up". Additionally I chose not to use S2A (Slide to Answer) in favor of the default answering slider which works like a charm for me. When somebody calls me S2U2 automatically unlocks and I have full access to the answering buttons.
Further I disabled the automatic power off by S2U2 and let WinMo do this in order to prevent conflicts between the different power managments.
Click to expand...
Click to collapse
Hi! Personal i don't like S2U2 too much tho thx for your hint.
I want the wm6.5 implemented lock screen but with fast reaction.
Hi,
I have a Tilt 2 with stock ROM. The only two enhancements I use is "S2U2" and "Advanced Configuration Tool" ! I changed someting and now have a little problem :
When I get an incoming call and the caller id with the pic pops up, I can't pickup the call, using the green on-sceen button. This button does NOT pickup the phone call. I have to use the green hardware button to pickup the incoming call. However, I can use the RED on-screen button to end the call.
I soft reset the phone a few times and tried some settings with the "S2U2 and Advanced Config. Tool", but I can't get it to work.
Any ideas ?
I'd appreciate any help and suggestions.
Thanks,
JCE
same thing is happening to me, neither the onscreen slide, or the hard button work..
can't wait for an answer -_-
i lurk this forum here and there, and i still don't understand anything...at all -_-
jerzey_devil said:
same thing is happening to me, neither the onscreen slide, or the hard button work..
can't wait for an answer -_-
i lurk this forum here and there, and i still don't understand anything...at all -_-
Click to expand...
Click to collapse
Haha, it takes time to understand all the jargon and such that takes place around here. Just do some reading and searching, don't be afraid to ask questions if you can't find a thread explaining it. Eventually I would suggest flashing to a good rom like one of the Energy Rom's or a Cell Rom. The two best Rom Cooks on the Rhodium (Touch Pro 2/Tilt 2) side of xda.
I say the same thing as doublen1, use a non-stock ROM because these come with features already installed and you will be able to use S2U2 and all that stuff. and about the actual issue, I have had problems picking up calls with the screen, so I just started using the hardware keys.
Make sure you didn't mess around with any of the touch screen settings in Adv. Configr or BSB tweaks or something like that. This usually causes the problem with the dialer.
Hi AllTheWay,
well, I don't remember changing anything in the "Advanced Config. Tools" which would cause the touch screen settings to be different. However, I might have done or changed something...... Is there a way to get the "Touch Screen" settings to a default level without hard resetting the device ?
Thank you.
JCE
jce2005 said:
Hi AllTheWay,
well, I don't remember changing anything in the "Advanced Config. Tools" which would cause the touch screen settings to be different. However, I might have done or changed something...... Is there a way to get the "Touch Screen" settings to a default level without hard resetting the device ?
Thank you.
JCE
Click to expand...
Click to collapse
Not that I know of off the top of my head. There might be a setting inside of Adv Config that would allow you to restore to default. Also the S2U2 has a setting to take control as the dialer screen when somebody calls. You can try messing around with the settings in S2U2 as well.
PM me if you don't find an answer soon.
I have Smart Launcher and the time is not updating there too. The Smart Launcher and Notification bar are unsychronized between themselves too(usually the notification bar being some minutes ahead). The only way to get notification bar clock to update is to either rotate from portrait to landscape or vice versa, disable and enable automatic date and time, or turn off the screen and turn on again. The time is simply not changing minutes.
Searching google, I found only one similar case, but he didnt say how he fixed it(I hate everyone who does that).
Also, doing a factory reset didn't fix it either.
Consider this
http://forums.androidcentral.com/sa...49203-time-wrong-notification-bar-solved.html
Press thanks if I helped!
That was what I meant by the person that didn't say how. I don't have any wifi notification at boot up.
Trppmdm said:
That was what I meant by the person that didn't say how. I don't have any wifi notification at boot up.
Click to expand...
Click to collapse
Scroll down there clearly is a solved thingy
Press thanks if I helped!
RedLedLight said:
Scroll down there clearly is a solved thingy
Press thanks if I helped!
Click to expand...
Click to collapse
*EHEM*, I already checked that thread.
Stuck in full screen mode -
The Status bar and bottom bar auto hide. until I swipe to bring them back. How do I disable? On viper rom.
Wrong place to post. There is a thread for ViperROM believe it or not.
I wasn't certain it was because of viper rom, as I can find no relevant setting in Venom tweaks to fix this. Is there a core Android setting for this? I've searched extensively and found nothing.
I believe this is in the right forum now.
any ideas?
ok well... strange that my android started going full screen on viperrom suddenly and no one knows how to change it back. guess it's time to wipe and start over.
sirtom1 said:
ok well... strange that my android started going full screen on viperrom suddenly and no one knows how to change it back. guess it's time to wipe and start over.
Click to expand...
Click to collapse
I know this is kind of an old thread, but I just had the same problem. I think I put it in fullscreen mode while it was in my pocket and couldn't figure out what was going on for about 2 hours. For anyone else that encounters the same situation, here's the solution:
Press and the power button. At the bottom of the "Phone options" window that pops up is the Fullscreen mode option.
Also found that when I take it out of fullscreen mode, I have to reboot it to get the Status Bar to stop auto-hiding.
Thanks
you're a life saver,
i dont know i missed that out, i rebooted the phone a dozen times and scoured the venom tweak settings for hours to no avail
thaks again
buddy_lee said:
I know this is kind of an old thread, but I just had the same problem. I think I put it in fullscreen mode while it was in my pocket and couldn't figure out what was going on for about 2 hours. For anyone else that encounters the same situation, here's the solution:
Press and the power button. At the bottom of the "Phone options" window that pops up is the Fullscreen mode option.
Also found that when I take it out of fullscreen mode, I have to reboot it to get the Status Bar to stop auto-hiding.
Click to expand...
Click to collapse
buddy_lee - You're awesome. Thank you. I'd been dealing with this for a few weeks and it was driving me insane. I"ve looked through every setting on the phone, viper, and nova and couldn't figure it out. Can't believe how simple it actually was.
THANK YOU
Thank you so much!! I was crazy because cannot find out why my navigation bar auto hide, for about 2 hours. You are my hero.
I just register as a new member for comment and thank you for your help buddy_lee
buddy_lee said:
I know this is kind of an old thread, but I just had the same problem. I think I put it in fullscreen mode while it was in my pocket and couldn't figure out what was going on for about 2 hours. For anyone else that encounters the same situation, here's the solution:
Press and the power button. At the bottom of the "Phone options" window that pops up is the Fullscreen mode option.
Also found that when I take it out of fullscreen mode, I have to reboot it to get the Status Bar to stop auto-hiding.
Click to expand...
Click to collapse