ive had problems trying to install the x2 panel manager on my hd2 so i was wondering what is the proceedure for installing the x1 panel manager on it.
can i use the same active x .cab for x2?
ive downloaded the x1 panel manager but it doesnt seem to appear on my start menu so i believe ive done somehting wrong. i cannot find the direct proceedure for x1, only x2.
please reply asap
The panel manager install doesn't create shortcuts because X1s have a panel key. You can make the shortcut yourself, it's PanelManager.exe in Program Files.
Related
I'm using dopod d810 from 3 network. Just flashed it with the new 3.0 firmware with WM6. I'd like to have the comm manager icon on the today. How can I achieve that?
Thanks
trinityhack
Just download Trinityhack v 0.3 and in the Display tab activate the show wireless manager icon....
http://forum.xda-developers.com/showthread.php?t=303657
Funny,
Got back Installation of Trinityhack.CAB was unsuccessful. Is it because its WM6? I sent the zip file over bluetooth, unpacked it, and ran the cab.
Yeah what is the direct key in the registry? if anyone knows it'll be good.
Thanks
install battery status 1.04 beta and create a comm manger tray icon.
exe file can be found in windows directory
I used HTweakC 2.1 & it works fine with any rom "just ignore the error message "Unsupported Device ID TRIN100" when app starts.
Find the Comm manager shorcut (.lnk) in the windows directory and copy them into your startmenu/programs directory.
You will then be able to use it on your today.
TrinityHack didn't work. Still, very handy
Find the Comm manager shorcut (.lnk) in the windows directory
-I can't find the ink file (i sorted by type, unfortunately I don't know how to make file explorer show extensions)
Going to try htweakc
myppcsg said:
install battery status 1.04 beta and create a comm manger tray icon.
exe file can be found in windows directory
Click to expand...
Click to collapse
This really works?
hotplainrice - Here is the file, put it in your programs folder (Windows > Start Menu > Programs)
Here's how i operate the comm's...:
I use this extended version off BatteryStatus, which allows you to create Today tray icons for WLAN and Bluetooth (and some more stuff like ScreenOff, etc). I created trayicons for WLAN and BT only (and for DeviceLock) to operate these.....and i use VoiceCommand to toggle flight-mode on or off
To me it's the most convenient operation of the comm's ... have phun...
hotplainrice said:
TrinityHack didn't work. Still, very handy
Find the Comm manager shorcut (.lnk) in the windows directory
-I can't find the ink file (i sorted by type, unfortunately I don't know how to make file explorer show extensions)
Going to try htweakc
Click to expand...
Click to collapse
Not ink ... LNK
Hi,
I upgraded my P3300 with HTC´s original WM6 (Asia in English) and I have restablished the Dialer skin to WM6 by registry edit but I don´t know how to do this for the Comm Manager.
Please, no third paty Skins, Spb, etc, just the solution to remove Comm Manager´s HTC skin.
Thank you.
you need to replace a mui file
BlackTimes said:
Hi,
Please, no third paty Skins, Spb, etc, just the solution to remove Comm Manager´s HTC skin.
Thank you.
Click to expand...
Click to collapse
Just remove it -- It's simply NOT POSSIBLE!
Comm Manager is NOT part of Microsoft's OS, it was developed by HTC and added to the ROMs of HTC devices. So, it is included into the flashed ROM image.
Or explaining it with other words: this ugly green CommManager interface IS THE ORIGINAL!
But you can change it by replacing the graphic files with nicer ones...
cheers
how did you restore the phone dialer? Everytime ive looked at this in the past I loose the smart dialing
Any help would be much appreciated and go as techie as you like. I can handle it
You can find on this forum commanager CAB from keiser or use the attached file
ctibor said:
Just remove it -- It's simply NOT POSSIBLE!
Comm Manager is NOT part of Microsoft's OS, it was developed by HTC and added to the ROMs of HTC devices. So, it is included into the flashed ROM image.
Or explaining it with other words: this ugly green CommManager interface IS THE ORIGINAL!
But you can change it by replacing the graphic files with nicer ones...
cheers
Click to expand...
Click to collapse
Nikmel, thanks for the software but I get the following message
"Installation was unsuccessfull. The program or setting cannot be installed because it does not have sufficient system permissions"
I have also tried deleting or renaming the CommManagerRes file in \Windows but it seems it is in the Extended ROM and this is not possible. People who unlocked the ROM in the Artemis found it was erased after a hard reset
Dannyoneill, dialer backround was disabled by a registry edit found somewhere on this forum.
Obtain an editor. I used CeRegEditor
Go to Tools & Unlock Registry
Go to HKEY_LOCAL_MACHINE\Security\Phone\Skin
Change "Enabled" from 1 to 0
Soft Reset the device.
BlackTimes,
You can not remove it but you can replace with the file from that cab.
You need a filemanager like t commander or resco explorer.
BlackTimes said:
Nikmel, thanks for the software but I get the following message
"Installation was unsuccessfull. The program or setting cannot be installed because it does not have sufficient system permissions"
I have also tried deleting or renaming the CommManagerRes file in \Windows but it seems it is in the Extended ROM and this is not possible. People who unlocked the ROM in the Artemis found it was erased after a hard reset
Dannyoneill, dialer backround was disabled by a registry edit found somewhere on this forum.
Obtain an editor. I used CeRegEditor
Go to Tools & Unlock Registry
Go to HKEY_LOCAL_MACHINE\Security\Phone\Skin
Change "Enabled" from 1 to 0
Soft Reset the device.
Click to expand...
Click to collapse
Hey Nikmel, my fault, I retried after closing down Comm from the memory in use and it´s changed the Comm Manager, looks really nice, thank you.
BlackTimes said:
Nikmel, thanks for the software but I get the following message
"Installation was unsuccessfull. The program or setting cannot be installed because it does not have sufficient system permissions"
I have also tried deleting or renaming the CommManagerRes file in \Windows but it seems it is in the Extended ROM and this is not possible. People who unlocked the ROM in the Artemis found it was erased after a hard reset
Dannyoneill, dialer backround was disabled by a registry edit found somewhere on this forum.
Obtain an editor. I used CeRegEditor
Go to Tools & Unlock Registry
Go to HKEY_LOCAL_MACHINE\Security\Phone\Skin
Change "Enabled" from 1 to 0
Soft Reset the device.
Click to expand...
Click to collapse
You have to install the CAB imediatly after a soft reset. That way you won't receive that message anymore and the install funcion will de OK.
I have HTC Touch Elfin flashed to Shadow's 2.1 CE ROM and am trying to replace the comm manager with the one that is the "list" of sorts, black with the on/off on the right side. I tried a couple and all failed saying something about a program setting or not having permission. How can I change the comm manager?
Hallo
i found this: http://forum.xda-developers.com/showthread.php?t=486712
With this program you can assign anny program to the "software" startbutton.
I mapped YotaCenter to start button and would say its far better than the new windows startmenu and the new htc start menu.
It has several advantages. YotaCenter enables you to place favorite apps in an easy way and brings a taskmanager.
Also other program launchers are better than the windows/htc one - so give this startbutton app a try
I want to do this could you tell me what I have to do as that thread is a bit confusing for a nooby?
Thanks
thanks!!!
hI MARKUSSIEBERT!! Thank you for your great app. I am happy finally! Thanks
has anyone got this working on dutty 2.3?
Yes - im using it with dutty 2.3 even if it seems that there are some unexpected behavios.
Unexpected behaviors are:
-sometimes (ever 15 - 20th touch) the original startmenu appears, but its ok
-a second click on "Start" doesnt close the launcher window (because it only launches)
How to use it:
1. install the cab
2. open any registry editor
3. goto HKCU\software\allelimo\StartButton\Run
4. change the value to what you want to start
If you want to launch:
\Program Files\MyApplicationFolder\MyApplication.exe
you have to insert:
MyApplicationFolder\MyApplication.exe
if you want to start an application that is not on the Program Files folder, you can write the full path instead:
\Memory Card\Program Files\MyApplicationFolder\MyApplication.exe
How to extend the hook to the "Start" text?
HKCU\software\allelimo\StartButton\HookText
Set this value to 1 for hooking the word "Start"
Delete the key for hooking only the Start button
yeah, i could get it to work from the memory card, but i reinstalled yota onto the phone and i got it working..
as you said clicking start doesnt close it,
one more (i dont know if it is limited to dutty 2.3) if you click to the right of the start text the normal start menu will come up, every time..
you have to diasble the new htc startmenu first,
To enable "old" LargeMenu (Disable new manila start menu):
HKEY_LOCAL_MACHINE\Software\HTC\EnlargeMenu\Enable ManilaStartMenu =dword:00000000
then configure this tool...works for me
Alright, so I got a little idea for myself, I'd remove Panelmanager from the custom rom i downloaded and installed and tie the panelbutton to AE Button program. So I removed Panelmanager and added the button in AE but now I found myself having an issue. Every time I press the panelbutton I both launch the AE shortcuts and I get an error message saying that the panelmanager.exe can't be found. So something still ties the button to the manager. I removed the folder from Program Files folder and whatever files I could find in windows folder but to no avail.
Anybody got a nice tip to help me?
Sorry if this question has been posed before, tried searching but had no luck.
/Maddude
You need to delete a key in the registry(HKey_Local_Machine/Software/SonyEricsson/PanelManager or something like that, don't remember exactly ), and than in the Windos/Startup folder PanelManager.exe (if appears).
Soft reset and voila!
This problem was already discussed.
Cheers!