Hi,
I upgraded my P3300 with HTC´s original WM6 (Asia in English) and I have restablished the Dialer skin to WM6 by registry edit but I don´t know how to do this for the Comm Manager.
Please, no third paty Skins, Spb, etc, just the solution to remove Comm Manager´s HTC skin.
Thank you.
you need to replace a mui file
BlackTimes said:
Hi,
Please, no third paty Skins, Spb, etc, just the solution to remove Comm Manager´s HTC skin.
Thank you.
Click to expand...
Click to collapse
Just remove it -- It's simply NOT POSSIBLE!
Comm Manager is NOT part of Microsoft's OS, it was developed by HTC and added to the ROMs of HTC devices. So, it is included into the flashed ROM image.
Or explaining it with other words: this ugly green CommManager interface IS THE ORIGINAL!
But you can change it by replacing the graphic files with nicer ones...
cheers
how did you restore the phone dialer? Everytime ive looked at this in the past I loose the smart dialing
Any help would be much appreciated and go as techie as you like. I can handle it
You can find on this forum commanager CAB from keiser or use the attached file
ctibor said:
Just remove it -- It's simply NOT POSSIBLE!
Comm Manager is NOT part of Microsoft's OS, it was developed by HTC and added to the ROMs of HTC devices. So, it is included into the flashed ROM image.
Or explaining it with other words: this ugly green CommManager interface IS THE ORIGINAL!
But you can change it by replacing the graphic files with nicer ones...
cheers
Click to expand...
Click to collapse
Nikmel, thanks for the software but I get the following message
"Installation was unsuccessfull. The program or setting cannot be installed because it does not have sufficient system permissions"
I have also tried deleting or renaming the CommManagerRes file in \Windows but it seems it is in the Extended ROM and this is not possible. People who unlocked the ROM in the Artemis found it was erased after a hard reset
Dannyoneill, dialer backround was disabled by a registry edit found somewhere on this forum.
Obtain an editor. I used CeRegEditor
Go to Tools & Unlock Registry
Go to HKEY_LOCAL_MACHINE\Security\Phone\Skin
Change "Enabled" from 1 to 0
Soft Reset the device.
BlackTimes,
You can not remove it but you can replace with the file from that cab.
You need a filemanager like t commander or resco explorer.
BlackTimes said:
Nikmel, thanks for the software but I get the following message
"Installation was unsuccessfull. The program or setting cannot be installed because it does not have sufficient system permissions"
I have also tried deleting or renaming the CommManagerRes file in \Windows but it seems it is in the Extended ROM and this is not possible. People who unlocked the ROM in the Artemis found it was erased after a hard reset
Dannyoneill, dialer backround was disabled by a registry edit found somewhere on this forum.
Obtain an editor. I used CeRegEditor
Go to Tools & Unlock Registry
Go to HKEY_LOCAL_MACHINE\Security\Phone\Skin
Change "Enabled" from 1 to 0
Soft Reset the device.
Click to expand...
Click to collapse
Hey Nikmel, my fault, I retried after closing down Comm from the memory in use and it´s changed the Comm Manager, looks really nice, thank you.
BlackTimes said:
Nikmel, thanks for the software but I get the following message
"Installation was unsuccessfull. The program or setting cannot be installed because it does not have sufficient system permissions"
I have also tried deleting or renaming the CommManagerRes file in \Windows but it seems it is in the Extended ROM and this is not possible. People who unlocked the ROM in the Artemis found it was erased after a hard reset
Dannyoneill, dialer backround was disabled by a registry edit found somewhere on this forum.
Obtain an editor. I used CeRegEditor
Go to Tools & Unlock Registry
Go to HKEY_LOCAL_MACHINE\Security\Phone\Skin
Change "Enabled" from 1 to 0
Soft Reset the device.
Click to expand...
Click to collapse
You have to install the CAB imediatly after a soft reset. That way you won't receive that message anymore and the install funcion will de OK.
Related
New rom works fast, but I uni_extrom_unlocker doesn't work anyone having this trouble?
same problem for me, extrom is invisible
Cerumen
its working perfectly for me.
rerun it after upgrading and update the registry in hklm\system\storage manager
running fine for me
not working for me could someone please upload it onto the ftp?! please
same thing here. tried everything, and it did work before update... now it just does nothing
Carnivor said:
running fine for me
Click to expand...
Click to collapse
can you explain how you managed to get it unlocked and unhid?
thks
Works for me, but guys do you run total commander once reboot ? Coz only this soft so far help to access the Ex Rom
Seems to me that after a number of soft resets it no longer works. So if it is working now it may not continue to.
I want to rename Extended_Rom to Extended_Rom2 since I'm restoring everything except the registry from a Sprite Backup
(Worked well btw). Anyone got a clue how to do that
Cheers
Well... did someone figured out why are we having several experiences to unlock Extended ROM?
For me it doesn't work at all!
Neither:
- Buzz .exe http://buzzdev.net/component/option.../id,205/chk,99f2bb3ad970c21a6b337a374c7a7b1c/
- Asukal .cab http://buzzdev.net/components/com_simpleboard/uploaded/files/Uni_ExtRom_unlocker.cab
Total Commander also doesn't show the Extended ROM
Can anyone who succeded with it, detail the steps done?
The name is set in,
HKLM\System\StorageManager\Profiles\TRUEFFS_DOC1
With the key Folder = Extended_ROM so change Extended_ROM to Extended_Rom2
Thanks dah54,
done that, but the name does not change, not even from Total Commander when using the new JasJar rom
Conchas said:
Well... did someone figured out why are we having several experiences to unlock Extended ROM?
For me it doesn't work at all!
Neither:
- Buzz .exe http://buzzdev.net/component/option.../id,205/chk,99f2bb3ad970c21a6b337a374c7a7b1c/
- Asukal .cab http://buzzdev.net/components/com_simpleboard/uploaded/files/Uni_ExtRom_unlocker.cab
Total Commander also doesn't show the Extended ROM
Can anyone who succeded with it, detail the steps done?
Click to expand...
Click to collapse
Something seems to be getting corrupted in the registry. Perhaps by a common cab we are using? I had it appear, and I copied the cabs out of it, then after a number of resets it disappeared. I checked the registry values and they where correct!
So I then did a hard reset, and a soft reset to stop the Auto install of the cabs in the Extended ROM. I changed the following to these values in
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1]
"Bootphase"=dword:00000002
and in
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1]
"MountHidden"=dword:00000000
and
"Folder"="ExtROM"
and after a soft reset it reappeared, NOTE I DID NOT RUN THE TOOL again, just changed the values in the registry key. I believe this should not work, but it does.
So do you mean that some CAB in original Ext ROM, may be preventing the Unlock tool!?
Did you skiped all CABs in Ext ROM (by doing a softreset)? Or just after a specific CAB?
For me never saw Ext ROM, unlocked and visible with this i-mate ROM.
take out the _ its cos theres already a folder you cant see called Extended_Rom, i renamed mine to EXTRom and it shows as that in resco explorer, with no Extended_Rom folder Listed using buzz's method.
run the prog,
reboot,
edit the registry with EXTRom change,
accessed in resco no probs,
removed all junk,
now im set!!!
eman said:
Thanks dah54,
done that, but the name does not change, not even from Total Commander when using the new JasJar rom
Click to expand...
Click to collapse
Interesting....
Mine disappeared with the new rom also, and the registry values where correct, and no amount of soft resets or running the tool would make it reappear. So after a hard reset it reappeared with just the registry change. I have changed the Folder to ExtROM on mine and that is what FE (File Explorer) is showing, and it is back again for now.
what are the exact registry values you have now? do you have a TrueFS TRUEFS_DOC1 TRUEFS_DOC2 in autoload and a TRUEFS_DOC TRUEFS_DOC1 TRUEFS_DOC2 in Profiles?
Mano3 said:
what are the exact registry values you have now? do you have a TrueFS TRUEFS_DOC1 TRUEFS_DOC2 in autoload and a TRUEFS_DOC TRUEFS_DOC1 TRUEFS_DOC2 in Profiles?
Click to expand...
Click to collapse
Not sure who this was directed at or to. But this is what I have that works, for me.
HKLM\System\StorageManager\Autoload
**Only Keys here no values**
RelFsd
TrueFFS...................................< Note this key does not have a corsponding value under Profile >
TRUEFFS_DOC1
TRUEFFS_DOC2
HKLM\System\StorageManager\Autoload\TRUEFFS_DOC1
(Default)......................(value not set)
Bootphase....................0x2 (2)
DriverPath....................Drivers\BuiltIn\TrueFFS1
LoadFlags.....................0x1 (1)
Order...........................0x1 (1)
HKLM\System\StorageManager\Profiles\TRUEFFS_DOC1
(Default)......................(value not set)
DefaultFileSystem..........FATFS
Folder...........................ExtROM
MountHidden..................0x0 (0)
Name
PartionDriver
and one key called FATFS
HKLM\System\StorageManager\Profiles\TRUEFFS_DOC1\FATFS
(Default)......................(value not set)
DataCacheSize..............0x80 (128)
EnableWriteBack............0x1 (1)
Flags.............................0x14 (20)
FormatTfat.....................0x1 (1)
Note above values are from Resco Registry Editor
dah54 said:
Mano3 said:
what are the exact registry values you have now? do you have a TrueFS TRUEFS_DOC1 TRUEFS_DOC2 in autoload and a TRUEFS_DOC TRUEFS_DOC1 TRUEFS_DOC2 in Profiles?
Click to expand...
Click to collapse
Not sure who this was directed at or to. But this is what I have that works, for me.
HKLM\System\StorageManager\Autoload
**Only Keys here no values**
RelFsd
TrueFFS...................................< Note this key does not have a corsponding value under Profile >
TRUEFFS_DOC1
TRUEFFS_DOC2
HKLM\System\StorageManager\Autoload\TRUEFFS_DOC1
(Default)......................(value not set)
Bootphase....................0x2 (2)
DriverPath....................Drivers\BuiltIn\TrueFFS1
LoadFlags.....................0x1 (1)
Order...........................0x1 (1)
HKLM\System\StorageManager\Profiles\TRUEFFS_DOC1
(Default)......................(value not set)
DefaultFileSystem..........FATFS
Folder...........................ExtROM
MountHidden..................0x0 (0)
Name
PartionDriver
and one key called FATFS
HKLM\System\StorageManager\Profiles\TRUEFFS_DOC1\FATFS
(Default)......................(value not set)
DataCacheSize..............0x80 (128)
EnableWriteBack............0x1 (1)
Flags.............................0x14 (20)
FormatTfat.....................0x1 (1)
Note above values are from Resco Registry Editor
Click to expand...
Click to collapse
heeelppp i've change
DriverPath....................Drivers\BuiltIn\TrueFFS1_G31 with
DriverPath....................Drivers\BuiltIn\TrueFFS1
and now after a soft reset my screen is blank!!!
Hi Guys,
I'm trying to install a few of CAB's from the Orange Ext ROM on to my O2 Exec.
They all say they installed OK, but theres no sign of one of them, [a Signed CAB] even after a soft reset.
Do I need to do something else, to install Signed CAB's on other vendors ROM's ?
What do you mean with "theres no sign of them"?
No sign in the software removal section ? Thats normal because the cabs from extrom normally do not appear here.
If the desired effect from the cab is there yu got it working
Hi Ivan,
I've only got trouble with one of the CAB files, a signed one.
The file i'm trying to install is the 'Orange Today' plugin. It says it installs OK, but doesn't show up on the today screen or listed in its options.
The other CAB's which are not signed are Phone and MMS settings which install and work fine.
Is there something special I need to do to install an Orange signed CAB on an O2 Exec ?
Yes there is.
Unfortunately in the Orange rom are all files needed for the Orange style today screen.
In the cab file are only the reg settings to enable it.
Bad luck. Only chance to use it, is to extract the needed files and additional reg settings (there aren't all needed reg settings in the cab file) from the orange rom.
If you do this you will slowdown your device, because this thing is painfully slow.
OK, its seems i'm looking for the impossible again.
I'll give it a try the other way round.
Using the Orange ROM and adding the O2 settings and apps I need for work. Hopefully it won't be too slow when in work mode and the Orange plugin is turned off.
Thank you for your help Ivan.
I am having problems with applications under Windows Mobile 5.0. When i try to run them i get the following error.
The file 'foo' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.
1)Is there anyway of disabling the checks for trusted applications in Windows Mobile 5.0 on the Wizard?
I think this error becuz u r trying to run wm6 applications under wm5
vodovodo said:
I think this error becuz u r trying to run wm6 applications under wm5
Click to expand...
Click to collapse
I have same problem for BA wm 6.1 5.2.19199.1.0.0 PV DVH. Some people offered solution of HR. I don't agree with this. because we have to lose what we've been installing and spend more time re-installing them. so much time-wasting?
Any other solutions, please?!
Thanks in advance.
Problem may be cause of your SD card if u r using WM6. SD card PowerManagment value is set("DisablePowerManagment") to 0 in your registry. This means after a while your device will set your SD card power off for savg batttery. This cause to unread your program files etc while u start any program on your form your SD card device.
I fixed this problem like that;
By any registry editor:
Find the Path:
"Hkey_local_machine>drivers>sdcard>clientdrivers> class >SDMemory_Class"
after that find;
""DisablePowerManagement"" key and set its value to "1" than save and exit. Than soft reset your device. Problem will be fixed.
Sorry for my bad english.
Windows Mobile powered devices are shipped with default security settings.
The security model enables Mobile Operators to make post-production changes to security settings.
This can place significant restrictions on software which has not been signed and approved.
However you can change the default settings.
Take control of applications on your phone.
"All listed settings are decimal"
1. Connect the phone through ActiveSync.
2. Run your favorite remote registry editor "CeRegEditor (Download)" "Mobile Registry Editor (Download)" on your PC. http://ceregeditor.mdsoft.pl/
3. Navigate to HKEY_LOCAL_MACHINE\Security\Policies\Policies
Unsigned Prompt Policy:
This policy indicates whether the user is prompted to accept or reject unsigned .cab, theme, .dll and .exe files.
HKEY_LOCAL_MACHINE\Security\Policies\Policies
DWord = 0000101a Data = Use the following-->
0 = Indicates user will be prompted.
1 = Indicates user will not be prompted.
you will set that register decimal 1. that is solved problem
I have a HTC Tytn II and i get the same error. However, When trying to alter data using the reg editor you recommended, i found the 0000101a was already set to 1. Any other ideas?
Hi All,
Would someone be so kind to me a explain how I can move a package from the EXT directory or one Kitchen to the EXT directory on this version of kitchen.
I thought I could just simply copy the directory? So I had a go compiling a version of youtube from a different kitchen It would seem mot to work thou as I get the dreaded The file 'xx' cannot be opened. Ether it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file.
Any ideas how to get this to work?
Or look for the tool MsSigner, it can be found in most kitchens.
You'll be able to sign it with a signature that is accepted after you aply the enablyRapi and SPCCerts policies.
You're probably missing a key dependency package like dshow (mshow?) or concurrence manager. Also, make sure the shortcut path is valid. Lord knows why, but that's the message you get for bad shortcuts.
josephwsl said:
I am having problems with applications under Windows Mobile 5.0. When i try to run them i get the following error.
The file 'foo' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.
1)Is there anyway of disabling the checks for trusted applications in Windows Mobile 5.0 on the Wizard?
Click to expand...
Click to collapse
maybe .NET CF is missing or not up-to-date?
RAMMANN said:
maybe .NET CF is missing or not up-to-date?
Click to expand...
Click to collapse
ahh i love you bro, u saved me an hassle i tried everything and it was the net.cf
damii said:
you will set that register decimal 1. that is solved problem
Click to expand...
Click to collapse
When I try that, I'm told I don't have the authority to access that. :-(
now what?
Yeah, me too!!!
All of a sudden too. Everything was fine then I got these certificate errors every time I try to run Haret.exe to run android. This happened last night. Did my provider change something on me?
I try to change that registry key and it won't let me.
Re:this post
I have same problem for BA wm 6.1 5.2.19199.1.0.0 PV DVH. Some people offered solution of HR. I don't agree with this. because we have to lose what we've been installing and spend more time re-installing them. so much time-wasting?
You need hard reset!
Same problem "certificate errors" and a hard reset wont work
Plz help
damii said:
Windows Mobile powered devices are shipped with default security settings.
The security model enables Mobile Operators to make post-production changes to security settings.
This can place significant restrictions on software which has not been signed and approved.
However you can change the default settings.
Take control of applications on your phone.
"All listed settings are decimal"
1. Connect the phone through ActiveSync.
2. Run your favorite remote registry editor "CeRegEditor (Download)" "Mobile Registry Editor (Download)" on your PC.
3. Navigate to HKEY_LOCAL_MACHINE\Security\Policies\Policies
Unsigned Prompt Policy:
This policy indicates whether the user is prompted to accept or reject unsigned .cab, theme, .dll and .exe files.
HKEY_LOCAL_MACHINE\Security\Policies\Policies
DWord = 0000101a Data = Use the following-->
0 = Indicates user will be prompted.
1 = Indicates user will not be prompted.
you will set that register decimal 1. that is solved problem
Click to expand...
Click to collapse
Thanks! That really helped me. You literally saved me a good night sleep. I was already desperate.
Wow, it works Thank you!!!
Awesome!!!
This worked perfectly. Thanks so much for the help. I've been racking my brain about this for over an hour now, then found this through a search.
Thanks!
OMG
I have the same problem and I tried :
1/ Hard Reset
2/ Rom Update
3/ installed NetCFv3.5
4/ editing values in the registry
what els ????!
plzz i need your help
I have an HTC HD Mini with Manila 2.5.20131825.3 I am not sure which program I did uninstall and the quicklaunch icon asociated to that program become light grey.
Now when I clic on that icon a message appears sayin that "" file cannot be open...
you can see the screens at
ttp://img842.imageshack.us/img842/7476/captureyt.jpg
ttp://img63.imageshack.us/img63/5952/capture2iy.jpg
Can anyone tell me on which file or registry key does the manila save the quicklaunch links so I can erase this entry because using the gui I cannot either remove it or add a new one instead. It is becomeng me crazy as hell.
Thanks a lot!!!!
Which ROM version are you using? Maybe there's a ROM upgrade available
my ROM version is 1.36.412.1 (94538) ESN
Do you know if there is an update?
In case there is an update available if I apply the new ROM will that erase the whole device? I mean, would I need to re-install all the software? because I have several programs and I would have to start recollecting the installers before erasing the device.
Thanks a lot for your answer!.
You have the newest ROM. And yes, when you install a ROM update all data on your device is erased. You can compare it to install Windows 7 on a XP machine, all data should be back-upped.
I don't know what's causing your issue here. I'll try to reproduce it And then try to solve of course
Possible solution
All right, this is what you should do
Just install the cab file below and reboot your device Because I can't make a cab file with only registry tweaks, there will be a txt file in your My Documents folder Just delete it
PS: If you find one of my answers helpful, please hit the "Thanks" button
While Cooking for LEO, many CABs has a self registering Dlls which runs fine from the cab file but when you try to convert the cab to OEM package, this dll looses it self registering functionality because there wasn't any code grabbed to the OEM package that tells the Kitchen to mark it for self registering.
Is there any solution for such a case?
To Make it clear:
I'm trying to cook "MOBiDIV_PrayerTimes_Diamond2_B15_TSD_Jun1.Cab " but the problem with the included "fileosp.dll" which requires self registration that is been automatic done while installing the .CAB
So, is there any kind of solution to do it while COOKING the ROM?
Use kheb to grab all the registry keys that are installed during the cab install/reset process. Then put them in your package. Or just search for the keys. We're talking the HKCR\clsid keys, aren't we? They're usually easy enough to find, if you dump and search your registry.
Farmer Ted said:
Use kheb to grab all the registry keys that are installed during the cab install/reset process. Then put them in your package. Or just search for the keys. We're talking the HKCR\clsid keys, aren't we? They're usually easy enough to find, if you dump and search your registry.
Click to expand...
Click to collapse
Thanks for your idea.
I did already and got all clsid and inject them in the package but still the same.
It seems emulator is behaving differently than actual device, what you think?
InCities.cdb
After ROM Booting, i re-install the Original Application, it works.
This is normal because the original application is doing something with InCities.cdb file.
I knew that my registry entries is correct because:
1- I checked everything in registry before and after my modification.
2- I checked everything before and after Original Program Change.
changes are identical
BUT
BUT
WHEN I PLAYED WITH (CHANGED) THE REGISTRY ENTRIES:
FROM
[HKEY_LOCAL_MACHINE\Software\Apps\Shared]
"\\Windows\\InCities.cdb"=dword:00000001
TO
[HKEY_LOCAL_MACHINE\Software\Apps\Shared]
"\\Windows\\InCities111111111.cdb"=dword:00000001
then copied another file as the same name
then tried to change it back to original, THE APPLICATION FAILED.......................................
So, Here is the trick but i don't know how to fix.