Hi,
I use eMbedded Visual C++ 3.0 and develop a application for Pocket PC 2002.
Now I want to debug my applikation on an iPAQ with Pocket PC 2003.
But eMbedded Visual C++ 3.0 has a problem while connecting to that device: "The Platform Manager Server failed".
What must I do to be able to debug PPC 2003?
Thanks for all solutions !!!
Have a nice day!
Franz
use evc4++
Hi,
thanks for your reply.
Is the migration from evc 3.0 to 4.0 smooth or painfull ?
don't know yet.
there are issues with having both compilers installed, I think in some cases
you have to reinstall evc3 to get it to work again.
I use eVC+3
I have no problems with eVC+3
I installed PPC2003SDK
and since this time I can debug for PPC2003 devices too, and connect via PlatformManager too.
btw: I have VS#NET installed in this same partition. Dont know if it changes anything.
Hello Guys,
I found some messages here in XDA about some software to allow rgistry
edition. I tried to used PHMRegEdit.msi
I downloaded, instaled using ActiveSync but I can´t find how to start this application inside my Qtek 9100 (I think this smartphone is like the wizard 1200).
Any idea ? I couldn´t find anything in the Program File Directory or any icon in the PDA.
Thanks and nice days,
Marcelo Galeti
Hi,
I've a new question for the community:
I'm working under linux (mandriva for professional of tux) with a PC dell latitude D600 which doesn't have a bluetouth connectivity.
Is someone know a tip to connect my HTC to this system, someting like activesync under linux ... could he tell me that ?!
Big thank
SynCE
Try SynCE and multisync. But, as far as I know, this device is not yet supported.
If you can make it, please post a small how-to
you're right ! not yet supported, i've test it before !!!
so ...
You can use a program such as WM5torage to change the Trinity into an "external USB key" to copy programs onto your SD card. But of course, if you're looking to sync contacts/agenda, then that won't do it.
It comes in handy to copy over CAB files however.
Hi
I just installed pdaviet wm6 to my hx2410, battery drawing is not a problem for me, but as I found, wm6 use ipaq file store instead or RAM, for protection of files lost when battery is out. But this make whole system many times slower, can I switch wm6 to handle with files as old 2003SE and store files in RAM and totally disable ipaq files store?
thanks
no well a bit
with wm5 ms changed where storage was places from ram to flash
there is no way around that
but there are ramdisk tools which let the user use some of the ram for storage of files and programs
pity.... I was satisfied with 2003SE, the only problem was missing support for Wifi AES crypting. I will try install back 2003SE and put wifi dlls to windows folder...
Anyone can tell me what files exactly are "Utility" (2.27) and "Library" (2.34)?
You see it in wifi -> Manager
I like to copy these files from WM6 to Win 2003SE
thanks
problem is that windows mobile's driver model changed with wm5
so wm5/6 cant use wm2003 drivers and virsa versa
is possible use the Bk100 keyboard with wm6? how?
Hi,
I know you asked about it few days ago, but maybe someone will find this information helpful:
I don't know exactly about WM6, but I am using it without any problems on WM6.1 professional on my HTC Diamond, I just installed drivers from CD-ROM which I found in package
The only bad thing is folded-up stand - it isn't good for holding my Diamond.
tyran666 said:
Hi,
I know you asked about it few days ago, but maybe someone will find this information helpful:
I don't know exactly about WM6, but I am using it without any problems on WM6.1 professional on my HTC Diamond, I just installed drivers from CD-ROM which I found in package
The only bad thing is folded-up stand - it isn't good for holding my Diamond.
Click to expand...
Click to collapse
Hi tyran666 ,
I had buy one of this BK100 from MSI, but I can't run the install software because it's always stop and send a error message.
I tried install in Windows Vista and XP, and the problem is I do not have the .cab file, only the .exe for PC installation. For and unknown problem, the software stop before extract the drivers.
This keyboard (BK100) do not have support in MSI page (the same in pages from kingman and darfon, where it is referenced as G981). - MSI did not respond my ask for support.
In my research in web, you are the first one with which that the keyboard works.
The install software that came with your keyboard is: /MicrosoftStack/FoldableKeyboard.exe (2/2/2007, 84KB)? Can you send to me the driver you used, or inform where can I get it?
Thanks in advance
How to install the BK100 over problems with the software provided by MSI
jb0007 said:
is possible use the Bk100 keyboard with wm6? how?
Click to expand...
Click to collapse
How to install the BK100 over problems with the software provided
- this was used to install in X800 glosffish (ETEN)
You need to use the folowing files (I extract those from the original software):
BT Foldable Keyboard.exe and
BT_DKBdriver.exe
The 'BT_DKBdriver.exe' obviously is the driver, and needs to be saved in folder '\windows' in the device.
The file 'BT Foldable Keyboard.exe' should be saved in a folder. This is the application that starts the keyboard uses.
You need start the bloetooth in accordance to MSI manual, before using the keyboard . The keyboard password is 0000.
If anyone needs the files, ask using email.
ptaranti said:
Hi tyran666 ,
I had buy one of this BK100 from MSI, but I can't run the install software because it's always stop and send a error message.
I tried install in Windows Vista and XP, and the problem is I do not have the .cab file, only the .exe for PC installation. For and unknown problem, the software stop before extract the drivers.
This keyboard (BK100) do not have support in MSI page (the same in pages from kingman and darfon, where it is referenced as G981). - MSI did not respond my ask for support.
In my research in web, you are the first one with which that the keyboard works.
The install software that came with your keyboard is: /MicrosoftStack/FoldableKeyboard.exe (2/2/2007, 84KB)? Can you send to me the driver you used, or inform where can I get it?
Thanks in advance
Click to expand...
Click to collapse
Hey there! I suffer from the same problem! could you send the driver? these chinese error message means nothing to me
xxull said:
Hey there! I suffer from the same problem! could you send the driver? these chinese error message means nothing to me
Click to expand...
Click to collapse
Hallo! I saw your discussion: I'm interested with it becouse I also bought a bk100. I have a Acer n311 pda with WM5 and the keyboard doesn't work with the same problems of your discussion...
Can you help me? Thankyou!
ptaranti said:
How to install the BK100 over problems with the software provided
- this was used to install in X800 glosffish (ETEN)
You need to use the folowing files (I extract those from the original software):
BT Foldable Keyboard.exe and
BT_DKBdriver.exe
The 'BT_DKBdriver.exe' obviously is the driver, and needs to be saved in folder '\windows' in the device.
The file 'BT Foldable Keyboard.exe' should be saved in a folder. This is the application that starts the keyboard uses.
You need start the bloetooth in accordance to MSI manual, before using the keyboard . The keyboard password is 0000.
If anyone needs the files, ask using email.
Click to expand...
Click to collapse
Can You send me right soft for MSI KB100 for Samsung Omnia (win6.1)?
Please! send at: tomek.siwy(at)interia.pl
Can someone help me with BK100? I will send free one BK100 to the user who send me the drivers for WM 6 and Symbian 60s.
Pls reply me asap,
Thanks very much!!
xcorp said:
Can someone help me with BK100? I will send free one BK100 to the user who send me the drivers for WM 6 and Symbian 60s.
Pls reply me asap,
Thanks very much!!
Click to expand...
Click to collapse
Try this - Maybe works
http://www.xemainc.com/bluekeyboard/download/BK600_v1708_Driver.zip
Spiaatie said:
Try this - Maybe works
http://www.xemainc.com/bluekeyboard/download/BK600_v1708_Driver.zip
Click to expand...
Click to collapse
It's not working. hx2490b + WM5, WM6.1, WM6.5 v.3 (Spiaatie)
Maybe you have more ideas?
Drivers for BK-100
Ask by email ptaranti[at]gmail[dot]com
size 118 kb