is possible use the Bk100 keyboard with wm6? how?
Hi,
I know you asked about it few days ago, but maybe someone will find this information helpful:
I don't know exactly about WM6, but I am using it without any problems on WM6.1 professional on my HTC Diamond, I just installed drivers from CD-ROM which I found in package
The only bad thing is folded-up stand - it isn't good for holding my Diamond.
tyran666 said:
Hi,
I know you asked about it few days ago, but maybe someone will find this information helpful:
I don't know exactly about WM6, but I am using it without any problems on WM6.1 professional on my HTC Diamond, I just installed drivers from CD-ROM which I found in package
The only bad thing is folded-up stand - it isn't good for holding my Diamond.
Click to expand...
Click to collapse
Hi tyran666 ,
I had buy one of this BK100 from MSI, but I can't run the install software because it's always stop and send a error message.
I tried install in Windows Vista and XP, and the problem is I do not have the .cab file, only the .exe for PC installation. For and unknown problem, the software stop before extract the drivers.
This keyboard (BK100) do not have support in MSI page (the same in pages from kingman and darfon, where it is referenced as G981). - MSI did not respond my ask for support.
In my research in web, you are the first one with which that the keyboard works.
The install software that came with your keyboard is: /MicrosoftStack/FoldableKeyboard.exe (2/2/2007, 84KB)? Can you send to me the driver you used, or inform where can I get it?
Thanks in advance
How to install the BK100 over problems with the software provided by MSI
jb0007 said:
is possible use the Bk100 keyboard with wm6? how?
Click to expand...
Click to collapse
How to install the BK100 over problems with the software provided
- this was used to install in X800 glosffish (ETEN)
You need to use the folowing files (I extract those from the original software):
BT Foldable Keyboard.exe and
BT_DKBdriver.exe
The 'BT_DKBdriver.exe' obviously is the driver, and needs to be saved in folder '\windows' in the device.
The file 'BT Foldable Keyboard.exe' should be saved in a folder. This is the application that starts the keyboard uses.
You need start the bloetooth in accordance to MSI manual, before using the keyboard . The keyboard password is 0000.
If anyone needs the files, ask using email.
ptaranti said:
Hi tyran666 ,
I had buy one of this BK100 from MSI, but I can't run the install software because it's always stop and send a error message.
I tried install in Windows Vista and XP, and the problem is I do not have the .cab file, only the .exe for PC installation. For and unknown problem, the software stop before extract the drivers.
This keyboard (BK100) do not have support in MSI page (the same in pages from kingman and darfon, where it is referenced as G981). - MSI did not respond my ask for support.
In my research in web, you are the first one with which that the keyboard works.
The install software that came with your keyboard is: /MicrosoftStack/FoldableKeyboard.exe (2/2/2007, 84KB)? Can you send to me the driver you used, or inform where can I get it?
Thanks in advance
Click to expand...
Click to collapse
Hey there! I suffer from the same problem! could you send the driver? these chinese error message means nothing to me
xxull said:
Hey there! I suffer from the same problem! could you send the driver? these chinese error message means nothing to me
Click to expand...
Click to collapse
Hallo! I saw your discussion: I'm interested with it becouse I also bought a bk100. I have a Acer n311 pda with WM5 and the keyboard doesn't work with the same problems of your discussion...
Can you help me? Thankyou!
ptaranti said:
How to install the BK100 over problems with the software provided
- this was used to install in X800 glosffish (ETEN)
You need to use the folowing files (I extract those from the original software):
BT Foldable Keyboard.exe and
BT_DKBdriver.exe
The 'BT_DKBdriver.exe' obviously is the driver, and needs to be saved in folder '\windows' in the device.
The file 'BT Foldable Keyboard.exe' should be saved in a folder. This is the application that starts the keyboard uses.
You need start the bloetooth in accordance to MSI manual, before using the keyboard . The keyboard password is 0000.
If anyone needs the files, ask using email.
Click to expand...
Click to collapse
Can You send me right soft for MSI KB100 for Samsung Omnia (win6.1)?
Please! send at: tomek.siwy(at)interia.pl
Can someone help me with BK100? I will send free one BK100 to the user who send me the drivers for WM 6 and Symbian 60s.
Pls reply me asap,
Thanks very much!!
xcorp said:
Can someone help me with BK100? I will send free one BK100 to the user who send me the drivers for WM 6 and Symbian 60s.
Pls reply me asap,
Thanks very much!!
Click to expand...
Click to collapse
Try this - Maybe works
http://www.xemainc.com/bluekeyboard/download/BK600_v1708_Driver.zip
Spiaatie said:
Try this - Maybe works
http://www.xemainc.com/bluekeyboard/download/BK600_v1708_Driver.zip
Click to expand...
Click to collapse
It's not working. hx2490b + WM5, WM6.1, WM6.5 v.3 (Spiaatie)
Maybe you have more ideas?
Drivers for BK-100
Ask by email ptaranti[at]gmail[dot]com
size 118 kb
Related
http://forum.xda-developers.com/showthread.php?t=334490
appreciate if someone can help me to solve this probelm....
btw: where do i get a black "comm manager" for trinity without flashing any rom/where to get the cab file?....thanks..my device is still under waranty...so i dont want to flash it as yet.
Answer
http://support.kerio.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=442
jmermel, i ve done it already by adding secure=0 into the uid...it s useless...i m still getting the same error.
Have you tried?
Have you tried it on another machine?
on the xda exec, it runs ok with the servername.....without any probelm...the both exec and trinity use the same root cert....but only my trinity has probelm...
hi to all,
I think there a lot user here. but none have provide any answer as yet. looks like my case is quite rear.....
i was browsing throught the web and i saw this. http://www.techtalkz.com/windows-mobile/50414-re-ssl-problem-wm6-eas.html
it seems that the language support software is disturbing the activesync on my trinity.....is this possible? can somebody tell me what is wrong with my phone?
I do have ce-star installed on my trinity...
Something is wrong with teh certificate:
INTERNET_38 80072F06 The SSL certificate common name (host name field) is incorrect.
- OR -
Synchronization failed due to an incorrect SSL certificate common name. Verify certificate settings.
Solution:
1. The name of the Exchange server specified on the device does not match the common name on the certificate.
On your device, click Start, ActiveSync, Tools, Options, Server, and make sure that the correct server name is entered.
hi there,
i think i found the solution for my probelm. i guess not everyone has this probelm. well it s not a surprising for me. the source of the probelm is as follow....if u hav a chinese translator program, please uninstall it...the ce-star program is screwing ur ssl...(ok, cannot type type chinese msg to all my galfrens)
I m wandering which version of ce-star is the suitable for wm6....i ll mail to ce-star provider to find out the probelm...this has nothing to do with the servername or cert at all....
Thanks for the info
liewjoee said:
hi there,
i think i found the solution for my probelm. i guess not everyone has this probelm. well it s not a surprising for me. the source of the probelm is as follow....if u hav a chinese translator program, please uninstall it...the ce-star program is screwing ur ssl...(ok, cannot type type chinese msg to all my galfrens)
I m wandering which version of ce-star is the suitable for wm6....i ll mail to ce-star provider to find out the probelm...this has nothing to do with the servername or cert at all....
Click to expand...
Click to collapse
Thanks, liewjoee. You solved my problem too.
Now I'm able to get the direct push e-mails over SSL.
Confirmed that Leies's Chinese Extension works on my E-TEN X800. Check this place out: http://blog.g4team.com/?p=64
liewjoee said:
jmermel, i ve done it already by adding secure=0 into the uid...it s useless...i m still getting the same error.
Click to expand...
Click to collapse
I tried it, but it doesn't work for me neither.
(I haven't got chinese program - as I known.)
Any other idea?
Does anyone know how to remap the IE button (T-zones) with the HTC rom? I've searched but I can only find info for the T-mobiel rom. The HTC rom doesn't seem to have the lnk files. Thanks.
caramelzappa said:
Does anyone know how to remap the IE button (T-zones) with the HTC rom? I've searched but I can only find info for the T-mobiel rom. The HTC rom doesn't seem to have the lnk files. Thanks.
Click to expand...
Click to collapse
here is the file. edit it to reflect the mapping you want then place in \Windows
Worked perfectly, thank you.
Editing the file
Hello, I want to be able to do this but not sure how to edit the file as it has no file extension.
Also, I would like to launch opera mini but its a java midlet so unsure how to reference it directly like you would do a programme.
Any thoughts?
Thank you!
Totally stuck
Hi guys,
I am totally lost here. I kindda understand what the Wiki explains but to use it I get stuck. I am completely new to this whole business. bought a used blue angel (everything working on it) with a WM 2003 on it italian language. all I wanted was to swith from italian to english (or WWE as you guys call it). I do know that my ROm is 1.12.24 ITA Radio 1.03 and no value for extRom. that is what it showed when I tried to use one of the numerous updates available on XDA. first it showed me error 102 checksum error then country ID error. so I used the Ruu file and added the Checkceid_1 command as u suggested on wiki for blue angel. anyway I am stuck. now even the WM2003 italian is no longer available since I hard-reseted my BA. all I see now on the screen is windows mobile with some italian gibberish under it.
Serious help needed please.
Thank you
fudger said:
Hello, I want to be able to do this but not sure how to edit the file as it has no file extension...
Click to expand...
Click to collapse
use a text editor to open the file
johnnylavah said:
use a text editor to open the file
Click to expand...
Click to collapse
Hi, the zip file only includes a link and not the file itself.
Jonathan
Copy the link to the Windows directory on your phone. This will make the IE button bring up the Task Manager. If you want it to execute something else, edit the link. I used Total Commander for the editing.
Thank you sesinger
sesinger said:
Copy the link to the Windows directory on your phone. This will make the IE button bring up the Task Manager. If you want it to execute something else, edit the link. I used Total Commander for the editing.
Click to expand...
Click to collapse
I understand now
Many thanks!!!!
Here is the Fix for the .Net textbox input issue present in the HTC S630 that affects WLS and Yahoo Go !!!
Soft reset after installing the .cab
Thanks to Vertigo1md1032 at http://www.howardforums.com/showthread.php?postid=10489722#post10489722
Tried but did not work
Hello there,
I installed the Cab (install to: device) on my unlocked X02HT with dopod rom.
Turned the device off and on again but no change.
I am using FuseSP and PocketDOS and still both have this annoying numeric keyboard problem
Or does this hack only fix the Yahoo Go and WLS issues?
On my HTC S630 it fixed the problem I had with Yahoo Go, I really don't know if this fixes other apps (this should fix the input problems in the textboxes in .Net bassed apps, but I haven't tried any other) and if this works with other ROMs apart from HTC's one, I guess is just a matter of testing it.
The instructions that I have from that forum are:
- copy the .cab to your phone
- run the .cab with File Explorer to install it
- restart your phone (or shut it off, then turn it back on)
- it should work after that
It worked!
Hi,
I am using softbank X02HT with Dopod C730 ROM. This fixed the input bug with Yahoo! Go.
Thank you so much for this fix! I'm always grateful to smart ppl that come up with things like this!
Yus
does not work somehow on my x02ht dopod rom
as mentioned before i tried it with my x02ht with dopod rom. i did not try it with yahoo go but with other apps i had this numeric key problem with and there was no change...
funny thing is i can install the .cab file as often as I want to. It looks like it installs fine. And then just for fun if I click the cab again after reboot it installs it again. It does not tell me it is already installed even after installing it for the x-time. Is this normal? I tried to installl to device and storage card. no change.
Cheers
xsl777 said:
Here is the Fix for the .Net textbox input issue present in the HTC S630 that affects WLS and Yahoo Go !!!
Soft reset after installing the .cab
Thanks to Vertigo1md1032 at http://www.howardforums.com/showthread.php?postid=10489722#post10489722
Click to expand...
Click to collapse
It runs on my dopod c730.
How about Gmail mobile? I can input my username there...
anybody can help?
Worked like a glove! Solved problem of the apps that treats letters as shortcurts and dont write!
Thanks a lot
need yahoo go for c730
i need yahoo go for cavalier, is there any link to download this ?
do you really have yahoo go installed on your cavalier ?
where is the link to download ?
i always failed when im trying to install it, always unsuccessfull.
please help me
gimbong said:
do you really have yahoo go installed on your cavalier ?
where is the link to download ?
i always failed when im trying to install it, always unsuccessfull.
please help me
Click to expand...
Click to collapse
Go here: http://forum.xda-developers.com/showthread.php?t=432946 and read how to app unlock your device.
Also these would be very helpful http://forum.xda-developers.com/forumdisplay.php?f=415&nojs=1#goto_forumsearch, http://forum.xda-developers.com/showthread.php?t=298893
Cheers
Hello,
This new rom i780MSHC3 includes a new "mouse" driver that supports and press and hold function that simulates the right click menus, etc. My question is that if someone could extract the new mouse drivers and make a cab file or something?
This because i have a portuguese rom with specific service provider settings and utilities which, for now i dont want to loose. Also the rom i have supports the hard reset function which is very important in case of a disaster and is something i definitely don't want to loose.
Thanks,
OliveiraJMR
Joao Oliveira said:
Hello,
This new rom i780MSHC3 includes a new "mouse" driver that supports and press and hold function that simulates the right click menus, etc. My question is that if someone could extract the new mouse drivers and make a cab file or something?
This because i have a portuguese rom with specific service provider settings and utilities which, for now i dont want to loose. Also the rom i have supports the hard reset function which is very important in case of a disaster and is something i definitely don't want to loose.
Thanks,
OliveiraJMR
Click to expand...
Click to collapse
Hi. I´m in the same situation has Joao Oliveira.
Anyone could make a cab with the new mouse driver?
thanks a lot
Nuno
Lets keep trying
Come on people...
Can someone please try to extract the new mouse that has the new feature of press and holding.....
lets keep this thread alive
Joao Oliveira.
Yes, this would be usefull to many people out there
Best regards,
LoGiKZ
bump please
some one who already has a dumped rom .. plz create a cab with the new mouse files
thanks
i guess no one will do it...
can anyone help us to get this driver ?
Hello,
Any news on this??????
Still waitnig?
REaly no one has idea how to do that???
regards,
MB
dzikunek said:
Still waitnig?
REaly no one has idea how to do that???
regards,
MB
Click to expand...
Click to collapse
Try this.
Take the new mouse driver (mouse.dll), rename it as mouse-new.dll and put it in the \windows directory.
Use a registry editor and change all the mouse.dll values in mouse-new.dll, then softreset the device and see what happens.
Samsung SGH-I780 - i780MSHC3 mouse driver? Reply to Thread
The Solutor said:
Try this.
Take the new mouse driver (mouse.dll),
Click to expand...
Click to collapse
but where can i get it?
I've tried to use kitchen with rom file but I think I am not enough educated to use this tool.
hope you'll help... many people here will be happy
regards,
dzikunek said:
but where can i get it?
I've tried to use kitchen with rom file but I think I am not enough educated to use this tool.
hope you'll help... many people here will be happy
regards,
Click to expand...
Click to collapse
This is from the latest rom
The Solutor said:
Try this.
Use a registry editor and change all the mouse.dll values in mouse-new.dll, then softreset the device and see what happens.
Click to expand...
Click to collapse
Another "success-breaker":
I am using Mobile Registry Editor, and
1. I can find only touch.dll i HKLM\HARDWARE\DEVICEMAP\TOUCH. I can't find mouse.dll in the registry at all.
2. Any way: I can't make changes there... "Access denied message apears.."
Please Solutor! Don't give me up!
dzikunek said:
Another "success-breaker":
I am using Mobile Registry Editor, and
1. I can find only touch.dll i HKLM\HARDWARE\DEVICEMAP\TOUCH. I can't find mouse.dll in the registry at all.
2. Any way: I can't make changes there... "Access denied message apears.."
Please Solutor! Don't give me up!
Click to expand...
Click to collapse
I fixed #2 using Resco, but i still cannot find mouse.dll on my device
Another point:
3. I took touch.dll from rom i780MSHC3_UKENG_PDA and when I place it into device my touchpad dies at all (both stylus and touchpad)
regards,
realy?
realy no one can help?
Solutor, even you?
reg.
dzikunek said:
realy no one can help?
Solutor, even you?
reg.
Click to expand...
Click to collapse
I' have posted a coocked rom with the new and old drivers but seem tath noone has tried to see if it helps.
http://forum.xda-developers.com/showpost.php?p=2772920&postcount=55
The rom is an italian one, but if it works I can do WWE olmouse edition, very quickly.
mouse.dll
But any way, what if I have no mouse.dll on my ROM?
There is nothing to change, except touch.dll...
I am wondering if it is possible at all to change the driver without changing all ROM, what you think Solutor?
regards,
how do i install this mouse driver on my Touch Pro and Samsung i730 with wm6.
bump please......
hello,
I have TP 2 with windows 6.5 and I can not get my device id number from "ttnavigator bif" file.Its saying that "no app associated with ttnovigator"
Tomtom definately instaled.
Maube someone had that prob before.
did you buy the maps? Warez is not allowed on this forum I fear...
do I have to?
I allready have maps,but they do not work
Hey
This is the original text of this post.
tomtom
hi mate
so I have dificulties with TomTom on my phone.Can you help me to resolve it
AW man, am I 'that guy that knows this stuff' now?
gedas30 said:
hi mate
so I have dificulties with TomTom on my phone.Can you help me to resolve it
Click to expand...
Click to collapse
What kind of problems?
1. Problems recognizing installed maps?
2. Problems with bluetooth, or BTTray errors on bootup?
3. Problems with hardware keyboard recognition in TomTom?
If any of these PM me.
Just copy the .bif file to your PC, and open it with notepad.
ronh said:
Just copy the .bif file to your PC, and open it with notepad.
Click to expand...
Click to collapse
That's a good start.