Tilt 8925 SIMLOCK ERROR - Upgrading, Modifying and Unlocking

can anyone please give me a sloution for
this
- i have a correct unlock code for my phone but its saying i have tired 7 times and i have to wait for time out ?
how can i put in my code ?
or what else can i do to remove that message

Please anyonee the
Ok bottom n Emergency Bottom are disable ?
please help .

is there anyone who can help me wth this

wHAT ABOUT WAITTING FOR IT TO TIME OUT... BE PATIENT... IT WILL LET YOU PUT THE CODE

Judging by his time stamps he has waited long enough. sorry, i dont know how to help you otherwise i would.

Related

help needed / auto restarting

hello!
Can anyone help me with this:
after 5 or 10 minutes, or even at the splash screen, my device automatically restarts and does it for several times.
When i try to put it into bootloader mode i see usb,..... but only for a minute. after that it goes out of bootloader mode and starts the OS again...
So i'm a bit worried that when i flash it, the bootloader mode will go out and the device will try to restart.
Any known sollutions to this problem? Any help would be appreciated!!
ps: no answers in the wiki nor in the forum.
thanks in advance to your replies!!!!!
I think your battery is given up or you have bad connection so that you dont get enough power.
Try first to clean the battery and device connections(best to use contact spray for PCB boards) if doesnt help then you need to have new battery
Thanks for your reply.
I just got it back 2 weeks ago and they installed a new board in it... i made them send it back and fix it (i blamed them)
they also putted french rom and AZERTY keyboard in it so they can fix that to (i had englis OS and Qwerty).
Thx for your post, i appreciate it!
Restarting Problem - PLEASE HELP!!!
Hi
I have an Orange SPV m5000 that I rely on for to carry my contact address book and send text messages (I know other phones would do it but I really like my Uni).
Recently mine has decided that it's going restart itself every few seconds. I have no idea why it's doing this, but the shop I bought it from are not helping me at all.
I've hard reset the device and that hasn't worked so if anyone has any ideas then please let me know, or if you know of anywhere I can send it to be repaired (I'm in the UK).
Thanks in advance
Nick

problem with unlocking my artemis

hello i already got my unlock code for my phone but i can't enter it i have on screen
You have tried 10 times. please wait for retry
i kept it on charger for 2 days on without touching it as i know i can enter the code for a while but nothing happened
i flashed the phone with the same and difference operator roms and still the same
anyway to get out of this
Regards
This is just an idea, don´t know if it works but, did you try make a soft or hard reset? i will show you tried 10 times but may be let you enter the code.
Good luck
Same here 9 counters passed and I cannot enter code is there any other way to enter unlock code or by any soft please do reply.
thanks
bcnboy
Same problem:
''You have tried 7 times. Please wait for retry''
How long do I have to wait ???
It seemns nobody find a way to solve this. I payed for unlock code and now it's useless.

EXEC stuck and i have tried everything i think

i have an error 120 when i am trying to install rom. and it is stuck in the bootloader.
top of screen has usb and at the bottom has v1.00. I cant seem to go anywhere from here.
please can someone help me i am pulling my hair aout and i dont know what i am doing as i have never been in this situation.
please help me.
DNY80 said:
i have an error 120 when i am trying to install rom. and it is stuck in the bootloader.
top of screen has usb and at the bottom has v1.00. I cant seem to go anywhere from here.
please can someone help me i am pulling my hair aout and i dont know what i am doing as i have never been in this situation.
please help me.
Click to expand...
Click to collapse
Have you completly READ the Wiki?
I´m sure you can find the way to solve your prob there
Good luck
My O2 Exec Got Name Blinking Problem
Hi Frnds
My O2 Exec Not Working Properly...
When I Open Any Folder Or Something The Names Automatically Started To Blink.
My O2 Got Blinking Problem.
Is It Software Problem
I Had Done Hard Reset...but Problem Remain Same
What To Do??
Solve It Out Frnds....
Help Me
Thanks In Advance
DNY80 said:
i have an error 120 when i am trying to install rom. and it is stuck in the bootloader.
top of screen has usb and at the bottom has v1.00. I cant seem to go anywhere from here.
please can someone help me i am pulling my hair aout and i dont know what i am doing as i have never been in this situation.
please help me.
Click to expand...
Click to collapse
GO TO OFFICAL O2 WEB SITE
If you are using Vista, do it on an XP machine. ALL of my problems went away when I updated on an XP machine.
If this is not the case read the WIKI, it takes time but you will eventually get your head around the whole situation.
One last thing, do not give up. Keep trying you'll get it!!

Cash via PAYPAL if you help fix hp6815 deadboot with jtag !! uk.

Hi all,
I have a hp 6815 and i am desperate to fix it.
I had upgraded ROM a few times with sd card fine, then i went to change the rom again and i think i didn't wait long enough and messed up the booting. But problem now is it won't go into to boot loader mode at all, it is totally black with no power.
It has an orange light when charging, so i think the battery is ok.
But i am sure the boot loader is corrupted and it needs restoring with jtag.
I have connected it up with some make shift wires and entered the jflashmm what i have heard other people fix their dead boots. It would ask me first question what i answer then it goes to next question. What is binfile name, i think ! I put in the EBO etc and have tried various ways but it won't register any. I just need help with the commands. I have already copy and renamed file for EBO_a.nb0. I just need a little help, if i fix this with help i swear i will send the person who helps at least 20 uk pounds through paypal, I would be overjoyed !!
So someone with good jtag knowledge and ipaqs would be great.
Also another thing is i'm not sure what the ntrst connection is to on jtag. Is it connected to anything at all ? As the diagram on dead boots shows this but not seeming connected, am i right ?
Thankyou in advance
Please someone give a little help.
Hello,
Please someone help with this. Just need to know about jtag[ntrst] and all the commands i need to input to fix boatloader from the 1st to last.
If i get this info and fix it i will either pay some money or give my TUROK game to you what is boxed with key and manual ready for multiplayer action, atm i'm into gta4 so don't play turok anymore. But this is a solid unreal engine 3 game.
FRAGEYE said:
give my TUROK game to you
Click to expand...
Click to collapse
SWEET!!!!
I guess ill try to help you,
Im going to ask you to try to "hard reset" your device...
I already googled it, and i found this Youtube Video
Tell me if that does anything....
If you still need assistance, then Private message me.
Thankyou, believe me though i have tried everything, no power only when charging. I have to fix this with jtag. Really all i need is commands from 1st to last.
Whoever can help with the right commands gets a game. Remember it is a ipaq 6815.
Does anyone know anyone with the knowledge.
I had before upgraded rom a few times with no worries and bricked it before but not where it has no boatloader.
I am pretty handy with flashing but need help with this.
Please people help a kind soul.
Thankyou
Someone must know about jtag.

Tilt 8900 UNlocking

hi i want to unlock the tilt 8900 phone to tmoblie to get the unlock code but
i was trying to upgrade the rom to complete the steps but in the middle it suck and now the only screen comes up is
the red , green , blue
any one have idea how can i unlock n get rid of this?
Welcome aboard
have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Good luck and enjoy!
i still didnt get it .
this is wat i get in my phone the Blue n white n black screen n when i connet this to computer the sync says its not connected ...
because i think the rom image havent done completeing but nothing is happing please show me how..
sdf
PROBLEM SLOVED THANKS ALOT
this quote helped me =)
and yes how can i unlock my phone to tmoblie please any gudie?
can anyone please give me a sloution for
this
- i have a correct unlock code for my phone but its saying i have tired 7 times and i have to wait for time out ?
how can i put in my code ?
or what else can i do to remove that message

Categories

Resources